Windows 7 in boot camp 4.0.1 Error

I installed windows 7 in bootcamp, and after completing installation it suppose to start with welcome window but after "preparing your desktop" massage its shutting down itself. and when I try to restart windows it gives black screen for a second and than restarts by itself again and again. I have iso image of windows 7.
anybody knows how to fix this problem?

mac pro workstation
so is windows on its own drive?
or not? how large partition?
Windows 7 SP1 64-bit?
pre-SP1 worked better though not sure why
burn ISO to DVD or USB flash card at slowest 2x burn speed

Similar Messages

Windows 7 64bit & Boot Camp 3.0 Installer Error

I have an early 2009 13" unibody MacBook. I have run the 64bit Win7 RC on it, and installing the 3.0 version of Bootcamp (as I recall) went well.
I have the released version of Windows 7 and am trying to install the 64bit version on a 62GB Bootcamp partition but for some reason, the 64bit BC install won't run. I get an error message that Boot Camp x64 is not supported on this computer model.
Is that correct? The early 2009 unibody MacBook won't run Boot Camp 3.x?
Has anyone else bumped into this problem?
Chris Spera
Just Another Mobile Monday Team Member
http:www.justanothermobilemonday.com
Owner
iTechGear.org

Had the same problem on an iMac and this is how I got it solved.
http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/
Hope this helps.

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
Stefan

Windows not finding Boot Camp on MacBook Pro

Hey everyone. I have Windows 7 64-bit and a MacBook Pro (mid 2010) with OS X Lion installed. When I boot up in Windows, it seems that only half of the time Windows realizes that it is on a Mac. Meaning...only half of the time the Boot Camp program is running in the notification tray, and only half of the time will Windows register the volume up/down, brightness up/down, and keyboard backlight up/down buttons on the Mac. It makes it very difficult to say...adjust the brightness or volume in the middle of a game. I can still go out of the game and turn up the volume in the notification area, but it is becoming a huge hassle. Like I said, this is only happening about half of the time. The other half of the time Windows registers that Boot Camp is on it, there is the Boot Camp icon in the bottom right corner of Windows, and all of my control buttons (brightness, volume, etc.) work just fine. Any ideas on how to make this happen every time? Thanks.

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp. It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

http://support.apple.com/kb/HT5287

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

Installing Windows 7 in Boot Camp with iso

I have downloaded an .iso file with Windows 7 on but I can't install it in Boot Camp. I've tried several things with no luck.
1. For the first, when I start up Boot Camp assistant I can't choose to "Create a Windows 7 install disk". I only have the two bottom options, the one for downloading support software and the one for installing windows 7. So I can't use my .iso file there.
2. I tried to burn a bootable dvd with the .iso file. I burned it on a Windows PC since my superdrive won't burn on the discs I've got (DVD+R). The disc works properly on the Windows PC but when i mount it in my Macbook I only get a popup that says I've put in a blank disc and some options of what I wan't to do next.
3. I tried to make a bootable flash drive and that pops up in finder, but the Boot Camp assistant won't recognize it and says I have to put in a Windows 7 install disc.
4. I also tried to open the image file in disc utility, but the result is the same as if I'm trying with a flash drive.
I'm out of ideas now so it would be nice if someone else knew any other possibilites to install Windows 7 in Boot Camp.
Or maybe there is an solution for the things I've alleready tried?
I'm using a MacBook Pro late 2008

Does it boot off the internal?
Is the external a full copy of your working system?> whew! then you can always wipe it clean and start over.
As long as the partition was created properly.... though 50GB can work it can also be slim fit in the end.
Under the worst condition - and the Mini is one of the worst, too - two minutes maybe to restart.
External because there never was an internal DVD player?
zap pram.
did you buy DVD or burn DVD? if burned, then that is likely cultprit Redo at slowest burn speed (2x) with verify.
Heck, even Windows 7 SP1 has been implicated on some were pre-SP1 worked.
For a test, there is Windows 8 RP for free. And Parallels 7 will set up a VM for you with the whole download and inistall. Not everyone needs to run natively.

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

Unable to install Windows 8 in Boot Camp because of MBR

I just this weekend reformatted my MacBook Pro (Mid 2010, 15", 2.4 gHz i5) and so I had to reinstall Windows 8 with Boot Camp. I had it working fine before, although the lack of drivers made it absolutely terrible (Has Apple released any drivers for it yet?) but the installation went without a hitch. When I tried to install Windows 8 this time though, it did not work at all. On the OS X side, everything went as expected, and when I went to Windows installation everything worked until I had to select a partition. I feel like at this point I should point out that I have removed the optical drive from my Mac and have the Optibay in my optical drive bay and have a 128 GB SSD as my main drive and a 512 GB SSD in the optical drive slot, which was where my Bootcamp partition was, around 250 GB. I was installing Windows 8 using an external enclosure for my Superdrive with the Retail Windows 8 DVD full version. Anyways, when I went to select the partition, it said that it was unable to install because
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks."
I have heard many conflicting resolutions to the problem, I have heard that I need to remove the other drive and install the optical drive and I have heard that this works very well, and many other things, I just want to find the correct solution to this. Thank you! And I hope I provided you with enough information!

I have a cd drive with a bootable windows 7 disc and I already downloaded the drivers needed to a pendrive on MS-DOS Format.
However this devil things asks me for a windows 8 disc.
Many many thanks if someone knows how to do it.

Blank screen when installing Windows 7 with Boot Camp - Mac Mini 2011

I'm new to the Mac scene, having barely any knowledge on the OS.
I've been trying to install Windows 7 via Boot Camp on my new Mac Mini (Latest offering from Apple).
I have an External DVD Drive which I have been using, connected via two USB's to the back of the Mac Mini itself. It's fully functioning, with the Mac recognizing the Drive. I've used it for some CD's and DVD's so far.
I have a full, licensed copy of Windows 7 Home Premium, bought from the Microsoft Store on a DVD. There's both a 64bit and 32bit DVD, of which I have tried both to install Windows 7.
I've been through the Boot Camp Assistant software, un ticking both the "Create a Windows 7 install disk" and "Download the latest Windows support software from Apple" because I already have the Windows 7 install disk. I've had troubles downloading the Windows support software from Apple, as it just stops about 1/4 of the download for no apparent reason.
So once I've made the partition, I insert the Windows 7 DVD into the External Disk Drive, and it reboots. At first it looks like the Disk Drive is working, as you can hear the Disk movement and a blue light on the front of the Disk Drive... But then the screen goes blank, and the Disk stops spinning (from what I can tell). Nothing else happens from then on.
Is there any reason as to why this is happening?
Thanks, Dominic

Yes. Booting from a USB-DVD to install Windows
The MacBook Air has extra drivers. Some people have edited the script preference plist to add their model Not all USB DVD devices may or may not work.
Burning electronic versions like an ISO or in .exe format you will see threads where that is the issue.

Windows 7 in boot camp 4.0.1 Error

Similar Messages

Maybe you are looking for