Windows 7 in Wrong Partition-How to Move?
I just downloaded Windows 7 to my Mac-Mini,mid-2007 edition. (Parallels)
I have 2 partitions,HD 1 (39GB) ,which has OS-X 10.7.5, and a vacant partition,Recovery HD 2 (40GB).
Unfortunately,Windows 7 went into HD1 and has filled up that partition,sharing space with OS-X 10.7.5.
How can I move Windows 7 to Recovery HD2 or to a 64GB flash drive and leave OS-X 10.7.5 in HD1? And make Windows bootable from Recovery HD2 or said flash drive?
I still have Parallels dmg file on my desktop along with the Windows 7 iso file.
Thanks!
If you used Parallels to install Windows this has nothing to do with Boot Camp. Windows is just contained in a file not a partition. When you run Parallels you identify where to store the file.
You should probably visit the Prallels site and forums about this since it is their product you are asking about.
Similar Messages
-
Java windows slip under menu bar, how to move?
Hi, I have accidently dragged some Java windows beneath the (transparent) menu bar.
Safari browser windows do not slip under the menu bar, but those created by a Java application can slide beneath it, up to the edge of the screen...just far enough to make accessing their title bars impossible. I'm able to resize the Java windows by dragging their accessible edges but I am unable to click on their title bars in order to drag them back down beneath the menu bar.
How can I click upon title bars or resize these windows to lower them in desktop space, so their title bars are lower than the menu bar? I am currently unable to drag or click upon their obscured title bars to move these windows. Is there another way to move windows without clicking upon their title bars?
thanksapparently there is a third party app called windowsmover or something like that
do a google search for "windows mac os move shortcut keyboard"
to answer my own post -
Photos in the wrong place how to move to the right place
I came back from vacation and attached my camera to get my photos to iphoto 6.02
I gave it a roll name and a description and downloaded the photos.
I disconnected the camera.
For some reason all my photos were placed in 2004 and there was no album created using the description.
So... how do I move the photos from 2004 to 2006 leaving 2004 empty and how do I create an album for my 2006 vacation pictures?Hi Sargenie,
The date that is set on the camera could be wrong. Open your camera settings and check them to make sure.
If you view your library by rolls (View>by film rolls), the all the photos should be in a roll with the name you gave it.
Click on the title of the roll to select all the photos
Go to Photos>batch change
Put in the correct date
The photos should now end up in the 2006 folder (I hope)
To make an album, click on the roll title to highlight the photos in the roll
Go to File>new album from selection
Name the album -
Re: Question posted in wrong forum - How to move ?
I just realised that I posted a question in the wrong forum. Is there a way that I can move it, or should I rewrite it in the correct forum ?
Thank youI think only the moderator would be able to move a thread.
Ive got only one option available: create a post I think youve got also only this one option. -
When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.
All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files. -
i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5, but the apps do not appear to have come across. Have I done something wrong? Please can someone tell me how to move my apps across?
After you Restore from backup, sync the iPhone.
-
How to move a window to another, existing space that already has windows
NOT happy with the new Mission Control. Give me back spaces!
I have been using virtual desktops (VDT) for years and I often work 14 to 18 hours a day on my mac..
I can reorder my spaces in MC but that seems to be about all I can do and it really is ******* me off.
I need to be able to drag a single window from 1 space to another space where I already have another application running. This was TRIVIAL in SPACES but seems impossible in MC.
example: I have a text file of notes in vi in one VDT and in another I have a browser window open to a customer location where I need to use or add to those notes with some complexity. I want to move that notes window from the VDT that it is in (because there are other apps there) to the current VDT so that I can easily use the notes and the browser together. I do NOT want to have to make the stupid vi window in ALL spaces. How do I do this?
another example: I have a browser with multiple tabs and I want to move ONE of them to another VDT. I can pull the tab to make another window.. But I can't move just that tab to another VDT!! How can I do that?
Please please PLEASE fix this in Mountain Lion !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!You have to start from the Desktop where the window is currently living to move it to another Desktop.
If you are using Safari in Full Screen, that screen is its own desktop and can't be moved to another desktop. If you are not in Full screen, go to the desktop that hosts the window and drag it to another Desktop in MC. -
i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
How to move new Windows 8 file swapfile.sys to another drive?
Windows 8 has a new swapping / paging file called swapfile.sys. It resides in %SystemDrive% directory, or C:\ for most users. It looks to be a swap file for Modern UI / Metro apps (source: https://blogs.technet.com/b/askperf/archive/2012/10/28/windows-8-windows-server-2012-the-new-swap-file.aspx?Redirected=true).
I wanted to ask how this can be moved to other drives, the same way pagefile.sys etc can be.
After having just installed Windows 8, I am going through the process of moving files that get a lot of writes, like pagefile.sys and hiberfill.sys, to other mechanical drvies, instead of being on my SSD with it’s limited write life. There seems to be no method
of doing this for swapfile.sys.
After a search, only this tread turned up (http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/to-move-swapfilesys-to-another-drive/bd1d5424-e410-4742-9668-e5060a021d40?tm=1356272384010), for the same question but it as never answered. All
that was explained, was how to disable both pagefile.sys and swapfile.sys. Also how to move pagefile.sys. The question about moving swapfile.sys was never answered. Hence why I am asking again. There also seems to be no registry settings for this file, that
I could find to change, to accomplish pointing it's location elsewhere.
Am not interested into getting into a debate about whether it is worth while moving files off SSD's to save on writes.
So if someone, ideally from Microsoft, can explain how to do, with this new swap file, what had been possible with the existing page file, for a good few Windows versions it would be much appreciated. Or how it can be disabled, without disabling the normal
pagefile setup, as I don't use and don't intend Modern UI apps.I also think this could not be moved and I could not find any document about moving it, either.
Thanks.
Nicholas Li
TechNet Community Support -
how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
ananyaHey Ananya,
I believe what you want to do is possible, but it will not be
easy. If you want to add a scroll bar that will scroll the graph
back and forth but keep the axis set, you would want to add a
horizontal or vertical scrollbar. Then you would create an event
handler for the scroll event. You would have to manually plot
different data within this scroll event. Unfortunately, there is
not really a built in way to do this with the Measurement Studio plot
control.
Thanks,
Pat P.
Software Engineer
National Instruments -
Watch movies on ipad it shows the wrong display of the movie how to fix?
When I try and use the video app and use the shared folder to run movies from iTunes. The wrong display of the movie shows up how to fix
Well when you hook up to your computer over wifi their are to folders one for the videos on the iPad and one for the shared from iTunes on the computer where all my movies are. And the worng display means that the picture it shows of the movies is wrong. When you touch the picture of the movie it comes up with what to is and the real picture comes up of the moive. When you back out the picture goes back to the wrong picture of it.
-
How to move lob segment in partitioned table
On my Oracle 11.2, I have a partitioned table wich I would like to move to another tablespace
After invoking script, there's still unmoved lob segment withing table
CREATE TABLE BONGO.AAA_3
ID NUMBER,
DATUM DATE,
OBJEKAT BLOB
TABLESPACE BONGODATA_HUGE
PCTUSED 40
PCTFREE 10
INITRANS 1
MAXTRANS 255
LOGGING
PARTITION BY RANGE (DATUM)
PARTITION P_MAXVALUE VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE BONGODATA_HUGE
LOB (OBJEKAT) STORE AS
( TABLESPACE BONGODATA
ENABLE STORAGE IN ROW
CHUNK 8192
RETENTION
NOCACHE
STORAGE (
INITIAL 64K
NEXT 1M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
PCTUSED 40
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
NEXT 1M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;how to move this lob segment in partitioned table?
or, is there some package for data move within tablespaces?
regardstnx...
now, I have another problem..
I have a nested table within partitioned table, and I'm trying to move it to another tablespace.
I tried to move child table (of nested type colum), but I didn't succedeed... -
How to move up the List Box for para. values in the "Edit Values" window?
Hi,
I am using Crystal Reprots 11.
I create 10 subreports, and each subreport contains a Parameters Field.
The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values.
Maybe because I created subreport3 & subreport4 after I completed other subreports, the List Box with the values required to select for subreport3 & subreport4 were located at the bottom of the "Edit Values" window.
How to move List Box with the values required to select for subreport3 & subreport4 up to the proper location (based on the order of subreports) in the "Edit Values" window?
Thank you in adavance.Hi,
Yes, that is true. The subreport parameters are prompted in the order you insert the subreport.
The only way to fix this is to save subreports from 5 through 10 (Right-click subreport > select Save Subreport as) first.
So, now all you have is Subreports 1, 2 and 3. Go ahead and add the Subreports from 5 to 10 in order and the prompts should be in order too.
-Abhilash
Maybe you are looking for
-
0EC_PCA_1 Accumulated Balance field issue
Hi Gurus/Experts, We have a standard extractor in ECC side: 0EC_PCA_1 wherein USD currency (CURRTYPE/Currecny type = 30) is giving out a sum value for Accumulated Balance field of -300,962.66 for Plant A. I checked on its corresponding EUR value (CUR
-
I am sending the standard Idoc ORDERS from R/3 to XI.When I post the IDOC from transaction WE19. It shows that IDOC is sucessfully sent and saved. but when i check the message in XI by I enter Message ID: ORDERS, I am getting this popup "No message s
-
TargetFilename in the Outbound File Adapter
Hi all, I have created an interface that sends projects form SAP PS (by tRFC) to a file directory (using an outbound file adapter). Each project is created as a individual file. All this works well, but the filenames created for the files are not ver
-
Mail notification (Attend, not Attend)
How configure Calendar Notification for each user receive an email, each time that a attende modifiy ou approve a meeting ? thanks !
-
What's your favorite "How to use PSE 4" book? Are there any that are specifically for the Mac version? Thanks.