Windows 7 instacrash report

Here's what it got. What does it mean?
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
11.1.3.8
Application Timestamp:
5274a87d
Fault Module Name:
KERNELBASE.dll
Fault Module Version:
6.1.7601.18229
Fault Module Timestamp:
51fb1116
Exception Code:
c06d007e
Exception Offset:
0000c41f
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
1033
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789

Hello TimRue,
Thank you for providing the details of iTunes unexpectedly quitting. I found an article with steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Windows developed report hangs on Unix Reports server ??

Hi,
We recently migrated from a Windows BI tier to HP-UX Itanium. The problem I have is that one particular report just hangs in the Unix reports server. The basics of the report are that it has repeating frames which displays three record blocks per page. I use a formatting trigger on a derived field to alternate the background colour of the frames.
After making several modifications to the report I've discovered that the trigger to alternate the background colour is the issue. I can use the same field with a trigger to say conditionally display a field or hide another frame and that works ok. I can set the background of the frame to another colour and the report works fine.
As soon as I use a formatting trigger to change the background it hangs.
In terms of report development I'm stuck with only Windows as Report builder is not available for our platform so troubleshooting this is a tedious process.
Has anyone seen anything like this before ????
Cheers,
Ron

hello,
oracle reports has always had this dependency. it needs the x environemtn for rendering of the output. so you need an active xsession for the reports server to point DISPLAY to.
a possible work around is the use of a soft-terminal such as VNC or xvfb (see oracle9i application server release notes for details).
regards,
philipp

How to change the font in query builder window in Reports 6i?

Hi
I am facing the old problem again and again, which is I can not find any way to change the font in query builder window in Reports 6i. The current font is so bad for alignment and ordering each part of SELECT statement. Is there any way to change this to COURIER NEW for example?

No, but I suggest using a different editor which does allow a different text option and just pasting it in.

Windows Update and the Windows Error reports

31/08/2014 08:41
Windows Error Reporting
Fault bucket 124661653, type 21
Event Name:
WindowsUpdateFailure
Response: Not available
Cab Id: 0

Problem signature:
P1:
7.6.7600.320
P2:
80246002
P3: D67661EB-2423-451D-BF5D-13199E37DF28
P4:
Scan
P5: 101
P6: Unmanaged
P7: 
P8: 
P9: 
P10: 

Attached
files:

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.6.7600.320_888a386ad31bd7d883fbf736bf547a8a1bd5bd9c_150a7995

Analysis
symbol: 
Rechecking for solution: 0
Report Id: 8809d3a9-30ea-11e4-8d08-5442495ff252
Report Status: 0
Does the reference to
D67661EB-2423-451D-BF5D-13199E37DF28
refer to Windows Update Agent and is a scan to find and down the updated version simply failing?
TIA, Gerry

Hi,
This structure is a general Windows Error report structure. There are different meanings for different types.
For the details, you could read this article:
WerReportSetParameter function
http://msdn.microsoft.com/en-us/library/windows/desktop/bb513626(v=vs.85).aspx
For your specific error, we could get these:
P1: 7.6.7600.320 means Windows agent version.
P2: 80246002 means the exact error code
P3: D67661EB-2423-451D-BF5D-13199E37DF28
should be the specific Windows Agent GUID.
Let's verify it:
Look for this GUID in your Windows Update log file located in C:\Windows\WindowsUpdate.log. There you could verify if it's a Windows agent.
Karen Hu
TechNet Community Support

Windows Error Reporting service connection failure

For some reason unknown to me, the Windows Error Reporting service has now decided that it cannot send crash reports to Microsoft.
I get the above error when I try to "Check for a solution" from Review Problem Reports Dialog. "Trying again later"
does not work. I've tried several recommended "fixes" including scanning for corrupted system files, making sure the WER service is running, and, checking firewall issues. Sending crash reports used to work, so, I'm at a loss as to why this is happening.
Can anyone shed some light on a possible cause?
Gort, Klaatu, Barada Nikto

Relating to the WER-Diagnostics, Vaseem posted some useful steps to resolve that issue here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/possible-heap-corruption-detected-exception-code/0657809a-a78b-48c7-9e6e-ac8ca97522c2
Here are the steps suggested:
Method 1:
Run System File Checker tool and check for missing or corrupted files follow the steps in the link:
http://support.microsoft.com/kb/929833
Method 2:
Open performance troubleshooter. Follow the steps in the link:
http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
Method 3:
If the above step fails follow these steps:
Step a:
Restart computer in safe mode. Follow the steps from the link:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Step b:
If safe mode works then try in clean boot. Follow the steps from the link:
http://support.microsoft.com/kb/929135
Follow the step 7 from the article to “Reset the computer to start as usual”, after performing the clean boot troubleshooting.
Also follow the steps in the link:
http://support.microsoft.com/kb/937093
Note: This above article is applicable for Windows 7 as well.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

Event Viewer Windows 8.1 - Windows Error Reporting

Have the following repeating error in Event Viewer / in the level of information/ :
Event Name:Application
Sorce: Windows Error Reporting
Data: 2015-03-19 14:53:50
Identification:1001
Category : none
Description:
Errors batch 91181006742, typ 5
Name of event: PDUWICA
Reply : no available
File Cab: 0
P1: 101
P2: 1.9
P3: 6.3.0.0
P4: 1045
P5: 29
P6:
P7:
P8:
P9:
P10:
I would appreciate explanation of this event and help in this respect.
Thanks in advance for reply and best regards, Ewa

Hi EWAGOSIA,
After all, I am supposing this is an information or warning level event, does your computer have symptoms such like frequently hanging, random freezing or blue screen? If not so I guess it's nothing to worry about.
I still think it is caused by bad compatibility of some applications or drivers. You could start with update your video driver and DirectX.
If the error still persists update all device drivers and keep your system up to date for good measure.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How does Windows Error Reporting identify your application?

When an error occurs and you are requested to send an error report, how does Windows Error Reporting service identify your application so that you can view the reports in your dashboard?
How do I register my applications for Windows Error Reporting?
To get a Windows logo an application must only handle expected errors and allow Windows Error Reporting (WER) to handle unexpected errors according to an article at
http://blogs.msdn.com/b/amitava/archive/2007/07/24/certified-for-windows-vista-logo-test-case-faq-test-case-32.aspx

An article How can a company get access to Windows Error Reporting data? at
http://blogs.msdn.com/b/oldnewthing/archive/2005/08/10/449865.aspx hints that the link is a registered code signing certificate.
https://sysdev.microsoft.com/en-US/Desktop/member/services/UpdateDigitalSignature.aspx

Windows 8 reports my CD has Acrabat Adobe Reader 7 and there is a compatility issue. How do I read t

Windows 8 reports my CD has Acrabat Adobe Reader 7 and there is a compatility issue. How do I read the CD? Thank you.

Your CD being what? If it contains PDF files, you should be able to open them with the latest Reader XI.

Where is the System queued windows error reporting?

Hi Guys,
I would like to increase the free disk usage to more than 15% on the mailbox server Drive C. After check and discuss, we are to achieve this goal that move the system queued windows error reporting to other place. However, i can't find this file after
read the relevant documents and can't find this file in Drive C. Could you help me found path of this file? it's urgent. i will waiting at online.
note: Our boss is not allow to delete this file. i am so sorry.

Hi,
You can check the Windows Error Reporting Service queue in the paths below:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
C:\Users\Username\AppData\Local\Microsoft\Windows\WER\ReportQueue (For Users)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Susie,
This is Daniel.
I note that This file take 18.2GB through view disk clear up, but these all folder just take 800M, I would like to they are not in their proper place.
but I would like to thanks for you help.

Deleting all users WER (Windows error reporting) files

Hi,
I am using windows server 2008 R2 (Standard), I have created around 120 users in this server, yesterday i found that my C drive is full, after checking all i found around 30GB is used for Windows error reporting files, Please help me to delete This files
Please, i cant delete all files one by one...

For what it's worth, this is the script I use to find Windows Error Reports that have not been sent, and delete archived Windows Error Reports:
It's not currently doing per-user error reports, as we don't have people logging into the servers, typically.
Karl
<#
.SYNOPSIS
Find-WER - Finds Windows Error Reports that have not been sent to Microsoft.
.DESCRIPTION
This script finds Windows Error Reports that have not been sent to Microsoft.
This script also deletes archived Windows Error Reports.
.NOTES
File Name: Find-WER.ps1
Author: Karl Mitschke
Requires: Powershell V2
Created: 12/16/2011
.EXAMPLE
C:\PS>.\Find-Wer.ps1
Description
Finds Windows Error Reports on the local computer.
.EXAMPLE
C:\PS>.\Find-WER -Computer Exch2010
Description
Finds Windows Error Reports on the computer Exch2010.
.EXAMPLE
C:\PS> Get-ExchangeServer | Find-WER
Description
Finds Windows Error Reports on all Exchange servers.
.EXAMPLE
C:\PS> $cred = Get-Credential -Credential mitschke\karlm
C:\PS>.\Find-WER.ps1 -ComputerName (Get-Content -Path ..\Servers.txt) -Credential $cred
Description
Finds Windows Error Reports on all servers in the file Servers.txt.
.PARAMETER ComputerName
The Computer(s) to search for Windows Error Reports. If not specified, defaults to the local computer.
.PARAMETER Credential
The Credential to use. If not specified, runs under the current security context.
#>
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact='Medium')]
param (
[parameter(
Position = 1,
Mandatory=$false,
ValueFromPipeline=$true)
[String[]]$ComputerName=$Env:ComputerName,
[Parameter(
Position = 2,
Mandatory = $false,
ValueFromPipeline=$false)
$Credential
BEGIN{
#region PSBoundParameters modification
if ($Credential -ne $null -and $Credential.GetType().Name -eq "String"){
$PSBoundParameters.Remove("Credential") | Out-Null
$PSBoundParameters.Add("Credential", (Get-Credential -Credential $Credential))
$PSBoundParameters.Remove("WhatIf") | Out-Null
#endregion
$ReportPath = "C:\\ProgramData\\Microsoft\\Windows\\WER\\ReportQueue"
$ArchivePath = "C:\\ProgramData\\Microsoft\\Windows\\WER\\ReportArchive"
$FoundReport = $false
$DeleteFailure = $false
PROCESS {
$PSBoundParameters.Remove("ComputerName") | Out-Null
foreach ($StrComputer in $ComputerName){
$Count = @((Get-WmiObject Win32_Directory -Filter "Name= '$ReportPath'" -ComputerName $StrComputer @PSBoundParameters).GetRelated('Win32_directory') |? {$_.name -match $ReportPath}).Count
if ($Count -gt 0){
Write-Warning "There are $Count Windows Error Reports on $StrComputer."
$FoundReport = $true
Else{
Write-Output "There are no Windows Error Reports on $StrComputer."
$Archives = @((Get-WmiObject Win32_Directory -Filter "Name= '$ArchivePath'" -ComputerName $StrComputer @PSBoundParameters).GetRelated('Win32_directory') |? {$_.name -match $ArchivePath})
if ($Archives.Count -gt 0){
Write-Output "Deleting Archived Windows Error Reports on $StrComputer."
foreach ($Folder in $Archives)
if ($pscmdlet.ShouldProcess($($StrComputer), "Deleting '$($folder.name.split("\")[-1])'")){
$Return = $Folder.Delete()
if ($Return.ReturnValue -ne 0){
$DeleteFailure = $true
if ($DeleteFailure -eq $true){
Write-Warning "Could not delete all Archived Windows Error Reports on $StrComputer."
END {
If ($FoundReport){
Write-Warning "Remember to run the Action items on the servers."
else{
Write-Output "There are no Windows Error Reports."
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Fault bucket -Windows Error reporting

Fault bucket 3981204210, type 5
What does type 5 signify?
TIA, Gerry

Hi,
I found this WIKI
Event ID 1001: Windows Error Reporting, from this article I see a sentence:
The bucket table (that is,
the Fault bucket type) for phony error bucket numbers is 5.
The article above also gives an explanation for type 1 to 4:
1:Crash32 buckets
2: Setup buckets
3: Crash64 buckets
4: Generic reports
Hope this might help
Best regards
Michael Shao
TechNet Community Support

How to open new window webi report using open doc?

Hi All,
i have created URL using open doc in Bi 4.0 .please find the below my code.
http://fcvws975/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AeX5DoctKBhGv1AiV2oibxU&sIDType=CUID&sType=BI
workspace&sRefresh=Y" title="" target="_blank" nav="doc"></a>
When i click on this hyper link it is opening in the same page not in new window but i want to see report in new separate window.
Can any one please help .
Thank you,
Regards,
Venkat

Hi,
In BI4.1 SP03, there are couple openDocument fixes related to workspace.
ADAPT01700442
Description:
When using an Opendocument URL to open a BI workspace, a timeout error occurs resulting in an HTTP 500 error
message that reads: "Your session has expired".
New Behavior:
This problem is resolved.
ADAPT01711393
Description:
In Internet Explorer 8, if you attempt to view an Analysis workspace embedded in the SAP NetWeaver Portal using
OpenDocument, the workspace will fail to load.
New Behavior:
This problem is resolved.
What version of BI4.0 do you have?
If the fixes above are related to your openDocument workspace issue, I'd suggest you to test it on a BI4.1 SP03 sandbox.
Hope this helps,
Jin-Chong

Opening a form in a POP UP window from report

I would like to open a form in a new window from a
link on a field in the report .
Parameters should be passed from the report to form.
Is it possible to do this with a portal link?
Also After modification of the form & on click of save is it possible to close the newly opened window(form) & refresh the report to reflect the changes as both refer to the same table.
Any Idea pls reply,
Thanks in Adv,
Sajith.

Hi,
You can achieve this using by sql based reports. Here is a sample code snippet
select ''||
to_char(empno)||'' empno
from SCOTT.EMP
Please dont forget to change the display type of the column to HTML in the column formatting section of the reports,
otherwise the report will render the html code.
You can have a close button on the form on which you can write a javascript which closes itself. You can write this
on OnClick
self.close();
Hope this clarifies you doubt :-)
Thanks,
Sharmila

Print dialog window in report generation

Hi...
I would like to create a report from my database and send it to printer. Basicly i want to use something like print report.vi in labview examples. But the sample is print directly to the default printer, how can i display print dialog window so i can select the printer and set another properties.
Thank you

After some searching, I found this thread:
http://forums.ni.com/t5/LabVIEW/Printer-selection/td-p/23136
Some VIs were posted which look like they should do what you need.
Matt Lee
National Instruments
Applications Engineer

Print window in report 6i

Hi All,
I created one report.in it's parameter form i have two parameters one is destype and the other is the desname whose source are the system parameters destype and desname.the report runs correctly with parameters destype as File and desname as 'f:\test.txt'.My problem is after running the report it shows me the Print window with the printer configuration and Print to file option.Can i suppress this window.I want my report to generate the file directly without showing me the print window.
Thanks in advance
pras

Try setting the command line parameter PRINTJOB to NO.
Regards,
Danny

Windows 7 instacrash report

Similar Messages

Maybe you are looking for