Windows 7 Install error after Recovery

I recently had a HD crash on my SL410. I received a new hard drive and recovery disks from support. All appear to install OK until Windows 7 tries to start. I get to "Setting up for first use " and then get an error message that says the install did not work correctly and I need to start over. Requested new disks from support but had the same error. Any ideas on what is wrong?

performing clean windows installation may solve your issue.
also, when you see lenovo logo, press f8 , then select "las good configuration" or "fix start-up issue" from the menu.

Similar Messages

DB_PAGE_NOTFOUND error after recovery on a CDS database

I am getting a DB_PAGE_NOTFOUND error after recovery, with a database that is configured in CDS mode. The error occurs after I insert several rows, bring down the process, remove the environment files and start the process which attempts to insert additional rows - gets a DB_PAGE_NOTFOUND error. The error persists ie. terminating and starting a new oprocess does not resolve the problem.
Amy help will be appreciated.

Assuming, that the db is corrupted and that CDS db's can get corrupted - is there any way, I can reduce the frequency of these errors by increasing Cache, page size etc.?
Following is my DB configuration:
               dbEnv_->open(envHome_.c_str(), envFlags_, 0);
                dbEnv_->set_errpfx(envHome_.c_str());
                dbEnv_->set_thread_count(16);
                dbEnv_->set_cachesize(0,(100*1024*1024),2);
                envFlags_ =   DB_INIT_CDB | DB_THREAD | DB_INIT_MPOOL ;
                envFlags_ |= DB_CREATE ;
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
db->set_pagesize((32*1024));
            db->open(NULL, temp.c_str(), tableName.c_str(),\
                DB_BTREE, DB_CREATE | DB_THREAD , S_IRUSR | S_IWUSR);
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
The platform is HPUX. The problems occurs periodically - i.e. not every time.
Thanks for your help.

Windows 7 126 error after itunes install, why?

ITunes runs well, however I get a windows 7 126 error. I don't know how to repair it. I've unintalled all the Apple files and reinstalled several times to no avail. please help and thanks in advance!

I found my solution. As some suggested here, I looked and found an older iTunes x86 file that needed to be deleted. Once done, my current iTunes works fine and no longer trips the windows 7 126 error alert.

Windows does not start after recovery

Hi, my son's sattelite 1800 started getting slower and slower to the point where it took almost an hour to boot into Windows. It got to the stage where it looked like recovery from the CD's was the only route - so we did. All looked successful from the recovery point of view but Windows XP Setup displays 'Please wait...' with normal looking disk activity for 20-30 seconds and then hangs - no disk activity, mouse stops responding. I've gone through the recovery in 'expert' mode and don't see any issues with the recovery process. Questions:
1. Has anyone else seen this?
2. What else can I do diagnostic-wise?
3. What, fundamentally, does the recovery process do/ (does it re-format partitions, might it have left a virus?)
4. Am I best following h/w or s/w diags?
Bitshifter

Hello
On this way it is not easy to give you a proper explanation why this happen. If you use the recovery CD for OS installation the HDD will be formatted and the OS will be clean installed. IF you use standard mode the whole HDD capacity will be used for just one partition. Using expert mode you can create two partitions or you can install OS on persisting partition.
Usually after recovery reinstallation there should not be any problem except for HDD malfunction.
Please wait message occur after first start and you can not compare it with usual boot up process. That first start after recovery procedure takes much longer time because the OS must detects all hardware components, install drivers and prepare the OS for the usage.
For further start the OS doesnt need so much time for boot up process.
Bye

Windows 7 install error 0x80300024

Mac Pro with 4 internal hard drives. My primary startup drive (in bay #1) has 10.5 on it.
Wanted to install Windows 7, so needed Snow Leopard's Bootcamp to do that. The fourth hard drive in the machine was new, so wiped that, installed Snow Leopard, then used Boot Camp Assistant to add a partition to that drive for Windows.
Started the Windows 7 install (32 bit). Got to the screen where you choose which volume it will be installing onto, and selected the "BOOTCAMP..." labeled one. Pressed the Next button, which is where I encountered the 0x80300024 error.
That is, it said something like "Windows cannot be installed onto this drive. Error 0x80300024."
Found some posts here on the Apple forums, from The Hatter, advocating removing all the other hard drives when trying a Bootcamp install. The jist of it was, remove all other OS X system drives, or Windows gets confused about its install location. And, while you're at it, might as well pull ALL your other drives before the install for safety (so in my case, that meant the 10.5 system drive from bay #1, plus data drives from bays 2 and 3).
So I did that, re-ran the Boot Camp Assistant in Snow Leopard, having it start with the install. Now the Windows 7 install is going forward.
THANK YOU to THE HATTER!
It is a shame that nowhere on their support pages does Apple acknowledge install error 0x80300024. They really ought to add that to their Knowledge Base page on Boot Camp/Windows 7. That page is here: http://support.apple.com/kb/HT3986

Also, note that I would have added my comments to one of the threads where The Hatter had given his advice, but they are old enough to be closed for new comments.
Besides, it seems like a good idea to have a thread with the error code (0x80300024) in the subject line.

CS$ Mac Install error after problems with system

I have Illustrator CS4 for Mac. Had system problems and several programs failed to run after re-installing system 10.6.8. Now all (including PSE) work except for Illustrator. Have tried to re-install Illustrator, but when the installer finishes, it says, "installation complete with errors. It suggests re-starting and trying again, which I have done several times. I have also run the uninstall app and then re-installed. After quitting the installer, Illustrator will open to the start screen, but clicking on any of the choices or selecting open or new from the file menu results in the program quitting. I really need this to do my work, and have people waiting for jobs.

Of course that should say CS4, not CS$. This is an iMac (late 2006) with System 10.6.8. There is nothing in any crash or log files that makes sense to me. Here is the message.
I have tried a few hints found in other posts for other install issues. Am still having the same situation. It starts, but accessing any menu or a choice from the startup screen results in the program quitting.

Flash install errors after starting

xp version of flash errors after starting

Try the offline installer(s) from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
If you still got problems, please provide more details.

CS6 Acrobat Pro Windows 7 Install Error

I tried several times to install cs6 and always get an error, I have not been able to install it, can you please help me?
Thanks
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
System Requirements

Hello Abhijit, thanks for the help
I'm doing the installation from my hard drive with the download of CS6 everything installed ok but Acrobat Pro didn't
I already tried what you recommended but didn´t work
Any other suggestion?
Thanks, regards

Windows 8 start up after recovery media disk problem?

My laptop has the Recovery blue screen with error code 0xc0000001 so I use the System Recovery DVD Media for Windows 8. After the process, it log onto Admin then the message "Windows could not complete the installation. To install Windows on this computer, restart the installation." I restart it several times, but that message keep popping up. What should I do?

Hello "ItsThatHim,
Take a look at this document, and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Windows 7 activation error after reinstall. Help please

Hey,
I have got a problem. A few weeks ago i have reinstalled Windows 7 on my x 1 carbon 20A7. And recently windows says that the windows copy that i use is not original and the error code 0xc004f059 showes up. I think there is some error with the bios. How Can i fix that??
Thanks in advance

So i figured out that i did not install the win 7 pro version that was supplied by win 7. I downloaded it from the offical windows page. Is there any way to get this version of win 7 that was provided by lenovo, without a CD?? I mean I got several Windows 8 Recovery discs but not CD drive. And can i use the win 8 recovery discs to install win 8 or what?.(I bought the pc with win 7 pro and got win 8 recovery discs).
I currently have got some sort of recovery version on my pc, which i can not reach and use at all.
It would be very nice to get this sorted, as i have tried the windows and lenovo support via chat and telephone.

Windows 7 sysprep errors after security updates to be IA compliant

After installing security updates to remain IA compliant I am unable to run sysprep on my Windows 7 VM's and our hardware images.
It is NOT rearm.
Log:
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxsrvc.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxtray.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\DRIVERS\Accelern.sys!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x3 setting SDDL on driver file C:\Program Files\STMicroelectronics\AccelerometerP11\stdcfltn\stdcfltn.cab!
2013-06-20 11:51:04, Error                        [sysprep.exe] UnattendFindAnswerFile: Explicitly provided unattend file [C:\windows\system32\sysprep\unattend.xml]
does not exist.
2014-03-27 13:48:30, Error                 SYSPRP WindowsSideShow: Failed to get task folder (0x80070003)
2014-03-27 13:48:30, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\System32\AuxiliaryDisplayClassInstaller.dll,WindowsSideShow_Sysprep_Generalize', returned error code 31
2014-03-27 13:48:30, Error      [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 31
2014-03-27 13:48:30, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0x8007001f
2014-03-27 13:55:57, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 13:55:57, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
2014-03-27 15:16:24, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 15:16:24, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f

It is not that. Based on other posts I have found that if I delete this key HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize, value {b3257dc1-2617-6667-6a6f-2fe2739a2b89} sysprep works fine. Does anyone know the risks
of deleting this key?

Windows 7 Install Error

I have received error code x80070017 during the installation of Windows 7 RC. This has occurred twice -- once while attempting to install into the fourth partition on my local HD, and the second time attempting to install to the third partition (lower cylinder position). No other explanation is provided.
A search of MSDN for the error code also failed.
HD partition map is:
Partition # Size Usage
1              60 GB WinXP
2              75 GB Vista
3              90 GB Windows 7
4              90 GB Data
Does anyone have any knowledge on this error to share?
Thanks, Jim

Hi,
I am getting CRC check failed error while installing Win XP with SP3..
In my case, I am downloading the ISO file on one computer and then transferring the whole ISO file in a portable storage device.
Then, I take that portable device to my home and copy the ISO file from there into my home computer to burn it to a CD-RW
Can the usage of two different computers, one for downloading the file and another for burning the file, could be the reason for this
Thanks,
Manik

Windows 7 startup error after uninstall of Photosmart 6510

After uninstalling Photosmart 6510 and software, get error message: "There was a problem starting C:\Program Files\HP\HP Photosmart 6510 series\bin\HPStatusBL.dll" when Windows 7 starts up.

Sounds like the software was not completely removed (or atleast Windows still is looking for something). Microsoft make a tool that should be able to help, it is called FixIt. Click the link below for more details:
http://support.microsoft.com/mats/Program_Install_and_Uninstall/
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

DVD player -10960 Install Error after 10.6.8 Download

After downloading OS X 10.6.8 to Snow Leopard, my DVD player no longer works. I get a -10960 Error installation error. The DVD player is v.5.4 running on MacBook Pro 2GHz (older 2010). Can I download 10.6.8 to my external hard drive and reinstall to MacBook? Would that even have the DVD player? Would I have to erase and install. I do have a retail version of OS X 10.6.3. Or, is there an Apple DVD stand alone download specific to 10.6.8? Have not seen this discussed in other forums. Any help would be appreciated.

Did you repair permissions and restarted your computer afterwards after you installed 10.6.8? If so, try the following.....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Another thing you can try is custom installing. You can custom install the DVD application directly from your install disc by following the onscreen custom install instructions. Or reinstall the os by installing the 10.6.8 combo updater directly from Apple's download site.

Timesten 1122 on Windows 7 32bit Error after changing hostname

I have Timesten 1122/Windows 7 32bit (UAC turned off for test environment) installed in Virtual Box VM/Windows 7 64-bit.
This is a very basic/fresh Timesten setup, without replication, cache group, etc.
It's been up and running no problem, until I change the computer name/hostname.
C:\Users\ttadmin>ttdaemonadmin -start
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
C:\Users\ttadmin>net helpmsg 2186
The service is not responding to the control function.
I check tterrors and ttmesg but there's no entry in there (I make sure of this by clearing the content first).
I tried to start Timesten Data Manager Service in Services, but it give error:
Error 1053: The service do not respond to the start or control request in timely fashion.
If I change the computer name back as before, timesten running again as usual.
Is there a way to fix this error?
Thank you very much,
Harlin.
Edited by: Harlin on Feb 27, 2013 11:51 AM
Edited by: Harlin on Feb 27, 2013 12:39 PM

I think we will need to see the messages from the TimesTen daemon log (tterrors.log and ttmesgs.log in <tt_install_dir>/srv/info directory) from the time the daemon (service) would not start.
One thing to check is that the hostname you changed to can be resolved and the (correct) IP address determined. For example, can you ping the new hostname from the machine?
Chris

Windows 7 Install error after Recovery

Similar Messages

Maybe you are looking for