Windows 7 install hangs while loading

Been trying to install Windows 7 64 to my MBP through Boot Camp, but it hangs when loading files from the DVD. It'll get through the progress bar saying "Windows is loading files..." but then stops after that.
Any ideas on what to do?

One of the reasons Windows 7 might have trouble, is where you are forced to delete and create NTFS out of the FAT/MSDOS partition that BCA creates.
Second, Windows 7 may assume that one of the 128MB or 200MB partitions on there (EFI at the end of each HFS volume and GPT head) look like FAT; Windows 7 creates a 100MB System Recovery partition. It may try to use those instead of taking it from the BOOTCAMP partition.
XP discs could vary and some versions would wipe out Mac OS, not even ask for where to put Windows, for no rhyme or reason, even XP SP3. Of course that means having a backup is doubly important.
Windows 7 64-bit is only "officially" support on some Macs, which doesn't mean it can't or won't, only that may have extra steps, may get an extra "Select 1 or 2" option due to its own EFI menu on Windows DVD.

Similar Messages

9.2.0.1.0 install hang at loading product on windows 2000 server SP4

When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
The OUI hang when loading product @ 91% on the "File Location" screen !
This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
Any URGENT idea ?
Thx

I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
Cheers,
R

Window form hang while looping

I created a window form, while doing a while loop, the window hang while processing. It will revert back to normal state after it finished processing. How do I prevent my windowm form to hang while processing??? Also I do not understand why it will hang while doing a while loop???

Hello everybody, would you mind if you telling how to design tool menu as MAC OSx.

PS CS4 upgrade install hangs while checking system profile

System is a Core 2 Duo 6700 with 4GB, XP2 Pro SP3.
Installing PS CS4 upgrade over CS3.
Downloaded file unpacks OK, but when running Setup the Checking System Profile bar gets to about 90% the PS Setup window flashes up for barely a second, then the install hangs, ie no further progress with the Checking System Profile (left if for 20 mins or so).
I've downloaded and run a new CS4 upgrade file from Adobe store. No change.
I've added SP3 (was on SP2), no change.
Any one seen this or have any ideas?
Thanks!

@Ender
I've been dragging through the installer mud for CS4 ever since a sunny summer day in 2007, so I clearly know some of that stuff... ;-) And sorry to say so, it's simply not the off-screen dialog problem in most of these cases (which a look at the installer logs would very likely confirm). We can discuss this further off-list, if you feel like it, so shoot me a mail to mylenium|-|at|-|mylenium.de. I sure would like to get to know some of the Photoshop-Aliens a bit better (as someone rooted in the video, compositing and 3D world) :-D
@Mike
Simply move them all out of the way or rename them and see what happens. The installer will create the folders again if needed and if e.g. you still need to run CS3, simply renaming/moving them back to their original state will still work (as long as you don't touch any folders related to licensing or shared core functions such as Anchor Service or Linguistics). If you're not feeling adventurous, then call support, they will provide you with more detailed explanations and hold your hand ;-)
Mylenium

Firefox hangs while loading pages.

When loading a new page (not always in a new tab, not always an additional tab or tabs, but it seems to happen more when opening multiple tabs) the little rotating circle will either remain dark and if an attempt is made to reload the location bar changes to new tab, losing the address in the location bar, or the rotating circle will go one way, then reverse, then continue to spin. At the bottom of the page where what is being loaded in a page shows it will hit on one thing (as I'm writing this in Chrome I'm loading a folder of bookmarks I've been loading daily for years that now is a nightmare and pages are stuck at "connected to ajax.googleapis.com," "connected to hell.myfonts.net," "waiting for dt.adsafeproteted.com," "connected to log.pinterest.com," "connected to cdn.syndication.twimg.com," "waiting for api.lanistaads.com," "waiting for www.projectwonderful.com," "transferring data from v4.moatads.com," "waiting for aax.amazon-adsystem.com," "connected to aax.amazon-adsystem.com," and the other three pages are stuck trying resolve the actual URL) and then refuse to go any further. After that the page will sit, unchanging, as best as I can tell forever. I've left a page loading for several hours while working and it was still connecting to googleanalytics when I came back. It does the same in safe mode. Not a single page in the book marked folder is loading, NOT ONE. They're all sitting and spinning either with blank pages or partially loaded. I will reiterate before someone suggests I not load so many pages at once that I've been loading this particular folder full of pages for at least five years and probably longer and it did not do this until the last month.
This has been going on for a while and has made Firefox worthless. It is getting worse. I have read every similar question and none of the answers has made a bit of difference.
I have tried safe mode.
I have refreshed Firefox.
I have uninstalled Firefox and installed the latest version.
I have cleaned my registry.
I have cleaned my cache (which was almost empty anyway).
I have deleted all temporary files that were not in use on my computer.
I have deleted the install folder in Programs(x86) and then reinstalled the latest version (this made everything even worse and resulted in no secured connections being available at all, including mozilla.org giving me not safe connection warnings so now Firefox is even less useful than before) and currently have no add-ons or themes installed.
I have run Spybot, Malwarebytes, Housecall, and several rootkit detectors with no luck.
This computer is less than a year old, is running Windows 8.1 and is up to date. I just installed Firefox v 37.0. When I went to look and see what the version was Firefox can't even seem to resolve its own update URL.
Application Basics
Name: Firefox
Version: 37.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
Report ID: bp-c4fb0dcb-300b-499f-9604-ff2202150402
Submitted: 1 day ago
All Crash Reports
Extensions
Graphics
Adapter Description: Intel(R) HD Graphics
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0156
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 9-16-2013
Driver Version: 10.18.10.3308
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 00000000
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D11 vs_5_0 ps_5_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d 1.1
AzureContentBackend: direct2d 1.1
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150326190726
browser.startup.homepage: http://forecast.weather.gov/MapClick.php?lat=38.24457956399675&lon=-85.76285815797684&site=all&smap=1#.VR8Tv-H0d-8
browser.startup.homepage_override.buildID: 20150326190726
browser.startup.homepage_override.mstone: 37.0
browser.tabs.warnOnOpen: false
dom.mozApps.used: true
extensions.lastAppVersion: 37.0
gfx.direct2d.disabled: true
gfx.direct3d.last_used_feature_level_idx: 0
layers.acceleration.disabled: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1428101019
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1428101009
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.8
Version in use: 4.10.8
NSS
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSMIME
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSSL
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSUTIL
Expected minimum version: 3.17.4
Version in use: 3.17.4
Experimental Features
---------------------

I get an e-mail with go-comics and the ones I want to post links to I'll open in the browser as I read them in the e-mail so I regularly have a dozen tabs open (all the same site) by the time I'm through the e-mail. Every third or fourth page will hang up on something (connecting to or waiting for) sometimes not loading a single image, sometimes loading half the page, sometimes loading everything but the comic (because, hey, why put that as the first thing to load when you've got all these ads and crap to throw at your paying customers?).
At some point a couple of months ago I got some malware associated with trovisearch (I do not know how that got past security and java blocker but it did, probably some hidden crap in something from CNET) that somehow spoofed a page for Housecall and added five or six pieces of malware and adware. I cleaned for two days after and still can't find anything left on the computer even though I've been running scans constantly to try to make Firefox work right. I downloaded and ran a scan using Kaspersky during that time and then uninstalled it. That very well may be the cause of the post-refresh SSL issue.
I have Spybot and Malwarebytes scan logs from the time of the infection if that would help in any way. It doesn't look like there's a way to attach .xml files in this forum, though.
I can also run hijack this and copy and paste if that would help.
I'm currently running Windows Defender and rely on that and Noscript and adblocker plus to keep me isolated from most attacks (I don't have those add-ons re-installed yet). I also run Peerblock because they add malicious sites and known hacking sources (like Chinanet) to what they block as well as all the fake p2p stuff that's constantly pinging the computer. If I'm treading around in perilous waters I run Sandboxie.
Chrome is working as normal but Firefox feels like dial-up or worse right now and without adblocker I might as well be using IE.

(EPG Install) Error while loading image

Hi,
I am facing "ORA-22288: file or LOB operation FILEOPEN failed" error while running apex_epg_config step. But all the steps before that (i.e. APEX Install [@apexins users users temp /i/] and change admin password) went all fine.
I am trying to install APEX 4.1 on "Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production".
I went through [url https://forums.oracle.com/forums/thread.jspa?messageID=9673913]this thread. But I am not passing /apex directory (apex directory is under "C:/Ash/Technical/Database/Oracle/apex4.1") , here is the outcome:
C:\Ash\Technical\Database\Oracle\apex4.1\apex>
11:33:41 sys@dev10db> @apex_epg_config.sql C:/Ash/Technical/Database/Oracle/apex4.1
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.21
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Directory created.
Elapsed: 00:00:00.03
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 18
Elapsed: 00:00:00.04
Commit complete.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.14
declare
ERROR at line 1:
ORA-31001: Invalid resource handle or path name "/images"
ORA-06512: at "XDB.DBMS_XDB", line 473
ORA-06512: at line 37
Elapsed: 00:00:00.17
timing for: Load Images
Elapsed: 00:00:01.42
Session altered.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.48
Commit complete.
Elapsed: 00:00:00.01
Session altered.
Elapsed: 00:00:00.01
Directory dropped.
Elapsed: 00:00:00.07I am installing from my windows XP, but the db server is on Linux.
Error above (line 18) is actually on this line of "apex_epg_config_core.sql" (my db charset is UTF8)
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
The error clearly suggest that the there is an issue with access my directory or file in that directory.
And I believe the 2nd error "ORA-31001: Invalid resource handle or path name "/images"", will go itself once the first one is resolved.
I went through the documentation and other forum threads, but I am stuck with this EPG install, it may be very silly thing that I may be missing, but any help in this matter would be highly appreciated.
Thanks,
Ash
Edited by: ash0602 on Sep 5, 2011 5:19 PM

Thanks Andy and Kiran for taking time to respond.
Andy, "@apex_epg_config.sql C:/Ash/Technical/Database/Oracle/" will not solve the problem, neither changing directory's name from apex4.1 to apex_4.1_en, as my directory structure till images is: "C:\Ash\Technical\Database\Oracle\apex4.1\apex\images".
Kiran, sorry but I do not understand the difference between what I have written what you mentioned above.
Though I understood the issue, when you see the apex underlying code (apex_epg_config_core.sql) it is actually creating a directory object ('APEX_IMAGES') in the database. While I was trying to refer the directory on my local windows PC ('C:\Ash\Technical\Database\Oracle\apex4.1\apex\images'). I then logged into the LINUX server and ran the command and it all went fine, see the response below:
SQL> @apex_epg_config /opt/oracle/product/11.2.0/db1
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old   1: create directory APEX_IMAGES as '&1/apex/images'
new   1: create directory APEX_IMAGES as '/opt/oracle/product/11.2.0/db1/apex/images'
Directory created.
old 47:     if '&IMGUPG' != '' then
new 47:     if '' != '' then
old 48:         l_mv_folder := '&IMGUPG';
new 48:         l_mv_folder := '';
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:00:31.78
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.Though I moved 1 step forward, but my apex login page (http://<server>:8080/apex/apex_admin => redirected to http://<server>:8080/apex/f?p=4550:10:<session>) refuse to come up as it is now showing "[url https://forums.oracle.com/forums/thread.jspa?threadID=1112378]apex is undefined" error.
I did the installation as [@apexins users users temp /i/] mentioned in the docs, and this is first install not the upgrade.
Any help on this ['apex' is undefined] (javascript error) would be really helpful.
Thanks,
Ash

Browsers Hang While Loading

In both Safari and Firefox, a loading window will occasionally hang and not return the page or take a long time to load. I've emptied the cache, cleared the history, reset the browsers, uninstalled Flash, etc. While a hung window continues to load, I am able to open a second window and navigate the web with no problems. Any ideas? Thanks!

Are you connecting wirelessly?
Are you connecting via any USB devices?
What network hardware do you have?'
If wireless are you encrypted with WPA2, and using at least 802.11g, or 802.11n, or do you have to use 802.11b or WEP for any reason?

BAM Install Hangs whilst "Loading ADC Sample Data Objects"

Hi
Just wondering if anyone has had the above problem whilst installing BAM in Windows?
I installed the Enterprise Link, loaded database schemas etc all fine and during the last 20% of the BAM install the installer just stops and nothing else happens. I've left it 30 minutes just in case, but no joy. I then have to terminate the installer as it doesn't "Cancel".
Prior to the installer stopping, I did get the option to "Upgrade my ADC" which i said "Yes" to. It then said it was already up to date and not necessary, so that should be fine I guess.
The output from the final "install.cmd BAM" run looks like:
INFO: All prerequisite checks passed.
Now proceeding with installation...
E:\installs\bam\bam>if /I [BAM] == [BAM] (call E:\installs\bam\bam\scripts\insta
llBAM.bat E:\installs\bam\bam 18206 BAM )
8:44:36.02: Detected BAM schema in your database...
8:44:36.04: Granting Service Logon Rights to Local User...
8:44:36.04: ...Completed
8:44:36.29: Microsoft.NET 1.1 --- Installed
8:44:36.35: Microsoft.NET 1.1 Service Pack 1 --- Installed
8:44:36.79: ODAC 10.2 Detected...
8:44:36.82: Oracle BAM Enterprise Link --- Installed
8:44:36.84: Now installing Oracle BAM...
8:44:36.84: During the Oracle BAM setup, input the following values
on the Configure the Active Data Cache database page:
User Name: orabam
Password: password for orabam account
Service Name: oraclebam
Do you wish to proceed [y/n]? [y] : y
INFO: YOU MUST REBOOT YOUR MACHINE AFTER INSTALLING BAM.
AFTER REBOOT, PLEASE RERUN THIS SCRIPT AS INDICATED BELOW
TO COMPLETE POST INSTALL TASKS:
E:\installs\bam\bam> install.cmd bam
Any help would be most appreciated!
Chris

I assume that at the end of the dialog, BAM was installed. You can verify this with two steps. (Note- you have to run install.cmd BAM 3 times).
(a) BAM services are registered in ControlPanel-- Windows Services. You should see EnterpriseLink, DataCache, ReportServer,PlanMonitor,EventServer components.
(b) Login to your DB and verify database is set.
sqlplus orasagent/orasagent@oraclebam ; select * from tab; <shows about 100 tables>
sqlplus orabam/orabam@oraclebaml ; select * from tab; <shows about 50 tables>
Let us know if this is ok and you can start the services and acces http://localhost/oraclebam.
If (b) above shows 0 tables, then do - c:\oraclebam\bam\cacheinit.exe

11.5.10 Install -- Hangs while unzipping files

i am trying to install 11.5.10 install on HP TRU64. Installer hangs randomly at different stage while trying to unzip files.
I have made ulimit -d same as ulimit -v ...
does anyone has idea what is going on??
Thanks,
Nishant

Oracle Applications release 11i requires 100 MB of temporary disk space for HP Tru64 UNIX. The default location for the temporary files is /tmp directory. If the amount of disk space available under the /tmp directory is insufficient, redirect the temporary files to another location of your choice by setting the $TEMP and $TMPDIR environment variable to a directory with sufficient space.
Sam
http://appstech-sam.blogspot.com

Windows XP hangs while booting

Hi everybody
I am currently experiencing severe Windows XP SP2 boot problems!
My system is a MacBook Pro with Intel Core 2 Duo 2.4 GHz. Here is some more system Information:
* Model Identifier: MacBookPro3,1
* Boot ROM Version: MBP31.0070.B02
* SMC Version: 1.16f8
* RAM: 4GB
I have installed MacOS X (10.5.1) and Bootcamp. In addition I have installed Windws XP SP2 (German). Currently use and have installed NO additional hardware drivers apart from the BootCamp ones.
The system hangs sporadically when I boot (using Boot camp) under windows. Windows XP freezes mostly during the initial startup (before the log-in). Sometimes however it freezes after I have logged in and have performed a few operations. These hang-ups happen almost 95% percent of the time. Yet after a couple of new starts and safe mode boots I am able to log in. I would also like to mention that I cannot log in when I boot at safe mode because the built-in MBP keyboard does not work; so I just stop at the log in screen and restart.
thanks for the help in advance

I just fixed a Dell Inspiron laptop with a similar boot hang problem. The machine would hang if the iPod was plugged in the USB port, or even a powered USB hub. The machine is 5 years old and is USB 1.1
The machine would hang in the boot sequence right before it would go to Windows start part. I took USB completely out of the boot sequence and that didn't do it. What did do it, based on a suggested fix from a Dell guy.
With the iPod unplugged, here is the Dell suggestion which might help some but not this Dell (keep reading below for the fix that worked):
1. Restart the System. (Unplug the IPod from the system)
2. Tap <F2> at the Dell Logo to access the BIOS.
3. Go to the Advanced Tab, and disable the USB legacy support.
4. Save the changes and exit.
But on the 1100 that I was working on, it had a older bios and used the Alt-P procedure to page through BIOS options. On page 3, there was a USB Emulation option. If you read the description, there is no way one would think that this would have an effect. I changed this to Disabled and that allowed the machine to boot with the iPod plugged in.
I hope this helps someone. If your machines hangs before windows starts, get into the BIOS and go to work!! Tom [email protected]

Logic Pro 8 hangs while loading EXS instruments/reverb...

Recently, I encountered a strange problem with logic pro 8: After saving with assets (copy external audio files to project folder), logic hangs every time I load an apple software instrument (i.e. EXS, sculptor) or apple reverb (i.e. space designer). The instruments will load and I'll be able to even get sounds from them, but soon the spinning multi-colored logo appears and logic hangs. Interestingly, after I choose to save the same project as without assets, the problem disappears. Any ideas?

Yeah I too have unfortunately been having it since about the time logic 9 came out :-/ i would greatly appreciate help as I've reinstalled logic, rebooted logic, deleted preferences and still it has trouble with the instrument load times. I also can hear and even play an instrument but have absolutely no access to logic while the circle spins. any help would be appreciated

Solution: iTunes 10.6.0.40 on Windows 7 hangs while syncing

I was trying to Sync Audiobooks to my iPod nano (6th gen) but iTunes 10.6.0.40 (on Win 7 Home Premium 64-bit SP 1) just stopped being responsive after pressing Apply and it showing "preparing to sync" in the status window. The nano went into sync mode for about 5 seconds but then returned to Connected state. iTunes.exe *32 was running at 100% (on one CPU) and did not even appear to begin the sync. [This state was also entered as soon as I set the "Manually manage music and videos" on the Device's Summary page.]
After (wasting) many hours of trying the standard support instructions to uninstall everything from Apple Inc. - iTunes, then Apple Software Update, then Bonjour, then Apple Mobile Device Support, then Apple Application Support - then download (another) copy of iTunes64Setup.exe, then install iTunes - the answer came ...
A very pleasant, helpful support rep (for case 298676734) thought to try the DOS command "netsh winsock reset" as suggested by wiclee in https://discussions.apple.com/thread/3559328 and sodaboy581 in https://discussions.apple.com/message/16361402#16361402. More explanation of this fix can be found at What does "netsh winsock reset" do? and Repair/Reset Winsock settings.
I suggest you try this first!! Hopefully this discussion has enough fo the right tags to help others find this fix!

More explanation of this fix can be found at What does "netsh winsock reset" do? and Repair/Reset Winsock settings.
Also see:
Apple software on Windows: May see performance issues and blank iTunes Store
(The Winsock key reset has the effect of clearing away the LSP in the cases where it's a conflict with a LSP in play, rather than corruption of the key.)

Audigy2 SB1394 hangs while load

I have had this product for a couple years. Always worked great! All of a sudden when my computer starts up, it sounds like it half-loads & the Creative logo freezes on the screen. I have downloaded drivers EAX4DRV and SBA2_PCW, uninstalled SB per your instructions, reinstalled, and the result is the same with the logo freeze. What's left to do?

For the code you show you do not identify the xml file to be loaded, which based on that code should be in the req variable...
var req:URLRequest = new URLRequest("yourfile.xml");

V8.2.1: generic file i/o error while loading VI's

Hello,
I had a large LV application open and running fine. I closed it, and upon re-opening the top-level VI it gives "Generic File I/O Error" on several sub-VI's (belonging to me, not LV). Opening those sub VI's individually reveals no problem at all, and in any case the whole code base lives in a Subversion repository and I have tried checking out a fresh copy of the whole source code tree and the problem re-appeared. Before Labview displays the "File I/O error" it will hang for several minutes with no disk or CPU activity.
I just tried checking out a fresh copy of the source tree on a separate computer. Now Labview is hanging while loading "<vilib>:\DAQmx\create\channels.llb\DAQmx Create Channel (CI-GPS Timestamp).vi" after having managed to load 920 VI's. On edit: I spoke too soon. It is now duplicating the "Generic File I/O Error" on one of my sub VI's.
If anyone has any clue to this strange behavior please let me know.
Thank you,
-Brian
Message Edited by brian_g on 04-08-2008 11:43 AM
Message Edited by brian_g on 04-08-2008 11:44 AM

What I found was this...
My code calls a bunch of subVI's in another directory. Those subVI's in turn had some unwise paths saved in some of them that loaded other subVI's from a network shared drive instead of the local disk directory.
The network shared drive had been taken off line since the computer was delivered to a customer last Friday. When LV tried to load the VI's from the shared drive, it would hang for about 5 minutes, then give the "Generic File I/O Error" with an "Ok" button to continue. I eventually sat and did this for about 13 VI's, taking most of an hour while waiting for the network reads to timeout.
Once my now-broken application loaded I was able to successfully re-direct the missing VI's to the local disk, resolving the problem.
The "Generic File I/O Error" message could not be less useful in this case and I'm rather irritated by the genericity of the message. Something like "Network read failed" would have immediately illustrated the problem and kept me from wasting a whole lot of time deciphering it.

Premier elements 10 hangs when loading on importingquicktime.prm

I am unable to use Premier elements 10 because it hangs while loading "importingquicktime.prm". It then goes back to the opening menu. Organizer works fine as does Photoshop, which was bought as a complete pack. I have the latest version of quicktime 7.7.1. I have checked my laptop and it has easily enough spec to cope with the programme.
I have been onto Adobe customer Support. Their technicians seems totally unaware of the probelm and seem to find it hard to grasp what is happening. They keep asking what error message comes up. There IS NO error message.
They got me to turn of all other programmes including the antivirus and to set up a new catologue in Organizer. Still the same problem.
I have spent so long on the phone to them that I will need a bank loan to pay for the phone bill. On two seperate occasions they have agreed to phone me back sometime during that day. Both times they failed to do so. It seems that they have a department called customer service and service is the last thing they want to offer.
I am surprised that Adobe seem not to know there is a problem as there has been a number of posts on this forum on the same subject.

For a quicker response, I'd suggest that you post your query on the Premiere Elements forum http://forums.adobe.com/community/premiere_elements

Windows 7 install hangs while loading

Similar Messages

Maybe you are looking for