Windows 7 Install Problem

I have a Lenovo r61i Thinkpad.  The optical drive was bad so I replaced it with a MAT**bleep**A DVD-RAM UJ-862.  It is thinner than the original drive but the connector is the same and if I add a shim to hold it up it connects.  I believe this is the optical drive used in the T51.
I am running Linux Mint 16 and am trying to install Windows 7 on a virtual machine with Virtualbox.  The install starts,  but, after a little while I get this error message:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now"
When I put the CD for this drive  that containst the drivers etc. that came with the drive the installer scans it but the driver it is looking for is not there. This is actually a brand new drive, however, it is old. I imagine it may not have a Windows 7 driver. Why Windows 7 doesn't have a driver I don't know.
When I go the the Lenovo site for a Windows 7 optical driver for the T61 (because this is the Thinkpad that this drive is for) there isn't one listed.
I when I look around on the web I find different driver download managers, but, I've noticed that the last time I used Windows for any length of time that there were all sorts of formerly reliable sites hosting files that sort of misled you into using their download manager that would install other software and  browser extention malware.  For this reason and the fact that the computer I am using is Linux I chose not to get this.
Does anyone have any idea what the problem might be.  My install disk is an official disk purchased from a mainline retail store.
Does anyone have any suggestions what the problem is and how to fix it?
TIA

Hi,
That error message is often misleading.  It usually means corrupted install media - bad DVD, bad download, bad burn, bad USB media creation.   Sometimes it is because a USB install device (flash or optical drive) should be plugged into a USB 2.0 socket instead of USB 3.0.
What it means when installing from DVD into a VM, I have no idea - just that it probably isn't a missing driver.
You might try copying the DVD and see if it throws an error during the copy.  If it doesn't, try installing from the new DVD.  If it does throw an error then you have a bad original.
You could also try installing from an ISO.  Google "legal Windows 7 download notebook review".
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • A different iTunes windows install problem: "validation"

    am posting this for a friend of mine who has been using iT on his windows laptop for years.
    He was trying to install the latest iTunes, and he downloaded it okay. When it started installing, he gets as far as the step "validating" and then it just stops - no error message or anything.
    any clues? I see other folks have been having Windows iT install problems, but not exactly this one (there was no error message number).
    (He's using a pre-vista version of Windows - could it be that the newest iT is only supposed to work with vista? I know nothing about windows.)
    w

    WillFriedwald2 wrote:
    am posting this for a friend of mine who has been using iT on his windows laptop for years.
    He was trying to install the latest iTunes, and he downloaded it okay. When it started installing, he gets as far as the step "validating" and then it just stops - no error message or anything.
    any clues? I see other folks have been having Windows iT install problems, but not exactly this one (there was no error message number).
    (He's using a pre-vista version of Windows - could it be that the newest iT is only supposed to work with vista? I know nothing about windows.)
    w
    Just a few quick thoughts.
    1. The newest iTunes does not work with Windows 2000.
    2. Some problems have been due to a display setting. To see everything the display setting (Changed through the Control Panel and/or Display) should be 1024 x 768.
    3. What specific error messages is he seeing?

  • K8N Neo4-FI Windows install problems (S-Ata problems)

    Hi
    Last week I "upgraded" my computer from Nforce3 (Radeon 9800 Pro) to Nforce4 (Radeon X800GTO) and when I did setup everything the platinum screen just hang but after removing all usb devices and tried to plug one after one in to the computer I located the problem the motherboard didnt like my keyboard so I changed it and I was able to boot, but then another problem came, I cant install windows XP at all, after booting with the cd this white text "checking something computer configuration" and then everything gets black and nothing more happens,
    I tried to change memory from (Corsair 3200XL to some other) and still the same problem, did also try to unplug the hdd, floppy and also tried to change the Graphic card from X800GTO to X600 but still no luck.
    What can be wrong, I managed to install windows 2003 sever but I really hate when something doesnt work, doesnt feel ok
    EDIT:
    I have a 3200+ Winchester cpu, 1024 Corsair 3200XL mem and Tagan 430W psu and Connect3d X800 GTO Graphic
    EDIT2:
    I have now located the problem to my S-ata discs, when I unplug them the install starts but when I plug them back I get the same problem, Im not running raid

    I suggested what I did because the black screen on Windows install is a common problem when RAID is set to enabled on a NON-RAID array. 
    One other possibility: ke84 are you installing Windows XP? - and what version is it?  If it is pre-SP1 it may have trouble understanding what SATA is.  If it is SP1 or later is should work fine without installation of any extra drivers, so long as RAID is set to DISABLED.
    I would still try installng on a single disk, connected to SATA-1 on the mainboard, before considering the above problem.  If one disk doesn't work, try the other.

  • Slate 500 Windows install problem

    I format my HP Slate 500 64 GB SSD.  Now i select Disk 0 Partition 2 ( 59.2 GB free space. Primary) but is not start and this message in the screen   " setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" How can i install windows 7 on my slate 500 tablet ? Please help me.
    Thank you for your support.

    Did you ever find an answer to your issue?  I ordered an HP slate 500 dirt cheap, and will be playing around with this device if you still need help, but unsure if I will run into this problem.  I will be attemtping to install Windows 7 Enterprise and Ulitmate editions to the tablet to see if they will work with HP drivers.  Basicly want more security, and test manageability from Server 2008.
    My guess is that you need to do a clean, custom install of Windows 7.  This will require deleting and formatting the HD for all Partitions and installing the HD driver.  Have you already created other partitions because I find it odd that your using Partition 2 default, unless your dual booting the device.  Especially after formatting the HD, it should really have no information, and I advice against Dual booting with a 64GB HD.  Windows 7 really needs 40GB alone for the OS.  I suggest Ubuntu loaded from USB to wipe the HD and then W7 USB boot to format and install OS.
    I also heard that HP added some type of password feature on the HD so installing a new HD is more of a hassle, and could be related to this, but I know nothing on this yet, but what I read.  Still reading up on the Slate, but when I get it in my hands next week I can actually work directly with you on the issue.  Also if it works like I want I can create you a VDI to load on a USB which will install my custom setting W7OS. 
    Also found this Advanced HD Format Info Utility.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

  • Windows install problems, "No bootable device. Insert boot disk and press any key" and general wrongness

    Hi,
    I've been having this issue with a Windows 7 install.
    Firstly, I have successfully installed Windows 7 before. I partitioned my HDD, held down option when booting up, booted off a USB and after a few goes it all worked fine. I didn't use boot camp assistant to install. I then proceeded to remove Windows a little while later. To do this I used disk utility to erase the partition on my HDD and but afterwards discovered my imac would continue to try to boot off the now non existant Windows partition. I solved this problem by using boot camp assistant via the "Remove Windows 7 Install" option. My imac booted up exactly as I would like it to from then on.
    I am now trying to reinstall windows. I tried the way that I did it the first time but after partitioning my HDD via disk utility, inserting my USB and rebooting with option held down I am only given the option of my main HDD and my recovery drive. I have tried burning the files on the USB to DVD and booting off the disk drive by holding down C while starting up. Neither the USB or DVD are visible to be selected when I hold down option during startup.
    When I try to use boot camp assistant to install I get a "No bootable device. Insert boot disk and press any key" error after the step where it partitions your HDD you. Also, my option to create an install USB via boot camp assistant is greyed out and unavailable for clicking.
    Help?

    Fix your superdrive.

  • Kt4 ultra windows install problems

    hi i just bought a new kt4 ultra board, the 1 with bluetooth, and i have hhad nothing but problems, i cant seem to get windows to install, i get lots of copying errors, i have changed the cdrom drive etc, still get the same thing. i Got an xp1800, 128 pc 2100 ram,geforce card, i know i need to get more ram, but surely with what i got it should setup windows, i understand its a memory problem but i cant seem to find out what exactly it is, any help any1 can give would be very appreciated

    http://www.memtest86.com on ram full test

  • Primairy IDE and Windows Install Problems!

    Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
    I orderd all my stuff from newegg.. I got:
    Intel 775 Socket 2.8ghz Prescott
    ECS Mobo (psh model)
    2x 512mb DDR 3200
    Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
    Chaintech GeForce 6600 GT video card
    Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
    Aspire-X Dreamer II Case
    Rosewell DVD/CD-RW combo (very cheap).
    Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
    I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet  ".
    When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
    What the hell?
    I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
    Has anyone else had any errors like this? Thanks - Erik

    you skiped the part about him buying the msi board.
    Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
    try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem.  I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

  • Freehand 9 Windows install problem

    I have received from a client a couple of Freehand files (.FH9) that don't seem to be translating into Illustrator (I tried Illy 8 and Illy CS2) properly. I still have my Freehand 9 CD, so I thought I would try to re-install Freehand and save out the files in EPS format. I haven't used Freehand for a number of years.
    But, when I try to install on any of my XP systems, nothing happens. I get the unpacking dialogs, but that's about it. 2 machines are running XP Pro 32 bit, and one XP Pro 64 bit. Same result on all of them. One one system, I got some more unpacking dialogs after about 5 minutres of no activity, but then, no more.
    Anyone have any ideas?
    TIA!

    Usually the Next button does not highlight until the install
    program
    recognizes the serial number as a valid formated number. It's
    most
    likely they are missing a number, used lowercase letters
    instead of
    uppercase, did not use dashes when required (or vice versa),
    or
    something else small but wrong.
    MX does require product activation but if they are not online
    it should
    give them the option to call a toll-free number.
    Rich
    Digital Daydreams wrote:
    > Hi
    > Here's the problem, I'm trying to help a person install
    freehand mx 11 over
    > the phone and they are not real computer knowledgeable.
    >
    > Here's what they said
    > They are running xp, when getting to the part of install
    freehand that
    > requires the serial number, they put in the number but
    there is a "NEXT" button
    > that won't highlight to let them click to proceed. No
    messages show up, they
    > just can't go any further because the button is dead.
    >
    > Do they they have to be online for the "NEXT" button to
    highlight and let them
    > proceed?
    > What else could be happening?
    >
    > Thanks
    > Frank
    >
    >
    >

  • Windows Installing Problems

    Dear Lenovo Community,
    Whenever I try to re-install Windows 7 from a portable USB CD/DVD drive or a USB key, setup gets stuck at the beginning where it asks me for missing CD/DVD drivers.
    I've scoured the web and I've tried all the solutions that exist within a few pages of a google search. I've tried things from reburning/downloading ISO to trying to install XP/Vista to upgrade to Windows 7. (XP install crashes with a BSOD). I've tried the suggestion where you disconnect and reconnect the CD drive during the install and I've tried my student edition bought from the university to the professional edition ISO from MSDN.
    Nothing seems to work.
    What in the world am I supposed to do?
    keehun

    What system are you using?  Make sure you attach the USB device to a USB 2.0 port, not a USB 3.0 port.  (USB 3.0 ports are blue).

  • 865p neo windows install problem

    Hi All!!
    I have  board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
    I Hear that 865p series baord alnly work well on Kigston memories Ram.

    Quote
    Originally posted by bjs_solo
    Hi All!!
    I have  board 865p neo 800 mHZ Bus with 256 DDR 333 Mhz Ram and intel 2.4 Mhz CPU when i try to install any windows i always have's error from the CDS and I can Install it olso the windows can find Sound Card.
    I Hear that 865p series baord alnly work well on Kigston memories Ram.
    Double post!
    http://www.msi.com.tw/program/service/forum/index.php?threadid=28852&boardid=10&styleid=1

  • Identity Synchronization for Windows install problem

    I am attempting to setup a identity synch between our Enterprise Directory Server 5.2p6 and active directory.
    I am installing the synch software on a Windows 2003 server.
    The issue is that the windows 2003 server is on a specific domain like : our-public.domain.com
    And the administrative domain of the LDAP system is simply "domain.com"
    Googling this I see there is no option for an ISW silent install and setup.exe seems to have no switches either.
    How can i override the local domain name so that it can install itself on the LDAP server properly?
    Thanks
    Darren

    thanks. I found it earlier when I was remebering how to remove stuff that was registered. I was basically getting my intsall error because of aci rights on my base dn. So I'm finally getting to play around with it now.
    Quick question. How many of you use this in production. Im just wondering how reliable everything is. I cant have this be a burden and I definetly dont want it interfering w/ my ldap service. I have 2 masters and 3 slaves and I'm just trying to come w/ the best way of installing this in production. Any ideas.

  • Problems with Windows install and erasing Boot camp partition.

    I recently decided I'd try running a copy of XP on my Macbook, the only reason being that the software for my OU work is only available on Windows. I used Boot camp assistant to partition my hard drive which went smoothly. When I tried to install Windows, I get to the Windows install screen, and it says "Press enter to begin installation". Unfortunately, my keyboard doesn't seem to work, so obviously I can't begin the installation. I've tried using my old Apple USD keyboard, but it didn't make any difference. I thought I'd try the whole process from scratch, but found I can't erase the original partition. I've read that you should use Boot camp assistant again, but when I press the continue key, I get the message:
    "The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
    Does anybody know a way of sorting either of these problems out? Much appreciated.

    I've been doing a bit more reading into the problem. I think the keyboard problem's because I'm not using the SP2 version on XP. So hopefully once I get a copy, I should be able to sort it. But I still can't seem to use BCA to erase the partition.

  • Problem with Business Objects 4.0 SP2 Windows install

    Hello Experts,
        I have followed the steps outlined by Mr. Gingle's blog "Caboodle - Part 3 - The BOBJ4 Install"   Caboodle - Part 3 - The BOBJ4 Install
    to do a vanilla BusinessObjects 4.o SP2 Windows install.  The install goes fine but I do not see the Server Intelligence Agent
    in the CCM.  Looking into the log files in the directory "C:Program Files (x86)SAP BusinessObjectsSAP BusinessObjects Enterprise XI 4.0logging"  I see the following:
    FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
    ENCODING:UTF8
    RECORD_SEPARATOR:30
    COLUMN_SEPARATOR:124
    ESC_CHARACTER:27
    COLUMNS:Location|Guid|Time|Tzone|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
    SEVERITY_MAP: |Information|W|Warning|E|Error|A|Assertion
    HEADER_END
    .crypto.cpp:199:-: TraceLog message 1
    |9664e8de-ad86-ff24-cb9d-24c469a525f0|2011 10 26 17:31:11:386|-0400|>>|A| |cms| 2704|4312|| ||||||||||||||||||||||assert failure: (.crypto.cpp:199). (FALSE : digest exception: The FIPS140 shared library could not be found (10027)).
    .dbinfo.cpp:45:-: TraceLog message 2
    |a9628c71-6cee-6874-8a14-15da66411e2e|2011 10 26 17:31:11:388|-0400|>>|A| |cms| 2704|4312|| ||||||||||||||||||||||assert failure: (.dbinfo.cpp:45). (false : Could not encrypt database connection string.).
    In another log file in the same directory I see the following:
    FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
    ENCODING:UTF8
    RECORD_SEPARATOR:30
    COLUMN_SEPARATOR:124
    ESC_CHARACTER:27
    COLUMNS:Location|Guid|Time|Tzone|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
    SEVERITY_MAP: |Information|W|Warning|E|Error|A|Assertion
    HEADER_END
    |F5ECB4F85C6A4E648FF1B464F0C56DED0|2011 11 07 16:48:57.889|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Server WV2ITBEAAP01:6400 not found or server may be down (FWM 01003) Connection refused: connect
    |F5ECB4F85C6A4E648FF1B464F0C56DED1|2011 11 07 16:48:57.894|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Server WV2ITBEAAP01:6400 not found or server may be down (FWM 01003) Connection refused: connect
    |F5ECB4F85C6A4E648FF1B464F0C56DED2|2011 11 07 16:48:57.894|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Is the CMS alive? Ensure the CMS supports SDK version 1400
    |F5ECB4F85C6A4E648FF1B464F0C56DED3|2011 11 07 16:48:57.895|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Is the CMS alive? Ensure the CMS supports SDK version 1400
    Do any of you have any ideas as to what might be the problem.
    Many thanks,
    Arvind

    Hi David,
         Thanks for getting back to me.  One question, Do I need to install CMS seperately or the does
         the BusinessObjects installs it?
         When I did the BusinessObjects install it installed the Microsoft SQL server 2008 Express and created an
         SQL Server Instance named BOE140.  I checked with Microsoft SQL Server Management Studio (which I downloaded from Microsoft) and saw that no tables were created.
         Regarding the message
         "(.\crypto.cpp:199). (FALSE : digest exception: The FIPS140 shared library could not be found (10027))."
         listed in the log file above,  what is my system missing. 
         Looks like CMS is not getting installed. 
         I am doing the install on a VMware Windows 2008 system with 8 GB ram and 50 GB file space.
         Are there any special requirements of configuration on the Windows system?
         Thanks for your help,
         Arvind

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Installing windows xp problems

    I got a new mbp after my old one died.
    Finally got my hands on a copy of windows.
    I have done this install before.
    I loaded boot camp, made the part, then restarted etc into windows install.
    Came to format part, however only one appeared, and didnt think much of it.
    Windows did it stuff, then restarted, so went to install. Seemed to restart, then ask the format part to ntfs again. Thought was strange but thought it was just windows being windows.
    After it kept restarting and i was running out of time, i gave up to fight another day.
    However when I turn my mbp on, without windows cd (which I dont have hold of anymore) screen goes white, then black and then I get a flashing line in top left of screen (can't remember what they are called)
    So figured it was boot into windows, which isn't installed, so restart and held option to select boot device. However it only comes up with a windows part, no os x.
    So great, prob wiped my os x and files/music etc. Ok, I can get them back from old computer easy enough (hadn't set up time cap).
    If i boot mbp and select os install disc screen flashed white then goes back to black screen again.
    If I boot mbp and hold c to boot from disc screen flashes black and white a few times then goes back to black screen again.
    Er, I don't understand. Why wont it even boot to os x?
    Thanks for reading and help would be well welcomed.
    James

    ok, looks like fresh install because it cant see any parts and wants me to create new one.
    oh well nevermind, live and learn. 25 years of apple and less than ten problems. Great record in my mind

  • *Problems uninstalling itunes/quicktime after using windows install cleanup

    I was having problems installing itunes/quicktime 7.6. Everytime I tried to install it it would say that it does not have a valid digital signiture. So one of the suggestions I saw on this forum was to install windows install cleanup and use it on itunes and quicktime. So I did but all it did is mess up my old itunes/quicktime. Now when I go to try and uninstall itunes and quicktime from the add and remove programs in the control pannel it does not even show itunes or quicktime in my program list. Any suggestions??

    Ok, Update. I was able to remove itunes and quicktime manually after going into my windows task manager and to the processes tab and ended all processes involving itunes, apple, or quicktime. So now when I install itunes/quicktimes via apples site when it gets to the end it just disapears and nothing happens. I searched to see if it installed anything and it didn't, didn't even give me any reasons why. Can anyone help me with this?? It would help me a ton!

Maybe you are looking for