Windows 7 installation on Replacement Hard Drive

Dell Diagnostics says I need to replace the hard drive on my Inspiron N5110. I purchased the laptop with XP installed and with an included upgrade to Windows 7. I have the XP installation disk but only the Upgrade Assistant DVD for Windows 7. Do I need to install XP on the new hard drive and then upgrade to Windows 7? Will Dell provide a Windows 7 disk (free)? Please advise.

Sorry, I figured you had already used that because you had already removed the partitions.
There are several versions available on the Ultimate Boot CD.
You will need to download it and use a utility like imgburn to burn the image to a CD.
The instructions on how to do that are here.
As to using the FDISK utility in the UBCD, there are simple menu's that follow the list of utilities on the page that I posted the link to above. Once you actually pick the FDISK utility, just follow the instructions. If you can't get it to work, let me know which FDISK utility you are using and I will put together some instructions for you.
If that cannot find the harddrive, then it sounds as if there is a harddrive issue.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Similar Messages

Cannot boot into Windows XP, should I replace hard drive?

THE PROBLEM: I have not been able to boot into or use Windows XP (SP2) for almost 3 years. I have been using Linux instead for 3 years and am using it now. The Windows Recovery process only half works, it works up until you have to boot up the computer from the hard drive. Then it no longer works. The computer will load the files from the TOSHIBA Recovery and Applications/Drivers DVD that came new with the computer onto the hard drive. But when you get to the point of booting off the hard drive, with newly added Windows & Toshiba files, nothing happens. It does not boot up into Windows XP. In fact I can see the newly added Windows & Toshiba fileson the hard drive when I boot into Linux (Live) off the hard drive.
THE HARD DRIVE (Specs below): I ran a SMART Data check using a Linux (Ubuntu) Disk utility on the hard drive and it passed everything except for Reallocated Sector Count. There are 20 bad sectors. I called the Toshiba 800 # on the DVD and they told me that the problem may be the hard drive. A new TOSHIBA Recovery and Applications/Drivers DVD costs $40. Toshiba also said there is no Windows XP Recovery Console on the DVD.
CAUSE OF THE PROBLEM: I think, and TOSHIBA agreed it is either the hard drive or corrupteD files on the TOSHIBA Recovery and Applications/Drivers DVD
POSSIBLE SOLUTIONS: I have found a couple of sites that seem to have instructions for making a Windows XP Recovery Console CD. And I have thought I might try to run some Windows XP Recovery Console commands from such a CD, such as fixboot, fixmbr, etc. The try to see if I can boot into Windows XP from the hard drive. If I can, then that might suggest he problem is corrupted files on the TOSHIBA Recovery and Applications/Drivers DVD. If I still cannot boot into Windows, then maybe I should replace the hard drive. This should be very easy to do.
QUESTION(S): Does anybody have any comments or suggestions? Does my approach sound good? Do you have any other suggestions?
I have a TOSHIBA Satellite L25 S1216 that I bought new in early 2006. It has a 40 GB (5400 RPM) Enhanced IDE (ATA-6) 9.5 mm height hard disk drive in it. User removable, i.e., it is easy to replace.
Thank you,
Bob
Solved!
Go to Solution.

My plan is to try to use the TOSHIBA Recovery and Applications/Drivers DVD to load the WIndows XP files onto the hard drive, then use the Windows XP Recovery console CD I downloaded from here
http://www.proposedsolution.com/downloads/download-windows-recovery-console/
by using commmands such as fxmbr, fixboot, etc to see if I can get the computer to boot up into Windows XP.
Good plan, Bob!
Description of the Windows XP Recovery Console for advanced users
A backup plan would be to obtain a Windows XP installation CD from eBay or wherever. They are super cheap now. Then you could install Windows clean and add the drivers and utilities from the website here. Or you could use it to repair-install Windows.
How to Perform a Windows XP Repair Install
You are entitled to activate Home Edition for free. I understand that even after Microsoft no longer supports Windows XP (in April), they will honor activation attempts.
I wouldn't mess with SSDs. And stick with IDE PATA drives. You won't need to worry about advanced-format technology since that didn't come along until the very recent SATA drives. Your BIOS should support 120GB (KB303013). Some here.
-Jerry

Suggestions on replacement hard drive

I'm needing a replacement hard drive for a 733MHz 128MB 40G Quicksilver. Anyone with experience on certain brands?
Thanks,
Jason

Jason:
A 120GB (ATA-100 or ATA-133) drive is perhaps the optimum size... You've confirmed that Mac won't see more than the first 128GB of any drive connected to the native drive bus on the logic board. You may add a drive larger than 120GB to this bus (in case you find a larger drive for less money than a 120GB one), but only the first 128GB will be recognized after formatting. For larger drive internal use at full capacity, you'd need to add a PCI controller card to hook the drive to.
To physically install the drive, you need to correctly set the jumper pins on the drive and then connect it to the proper connector on the ribbon cable. (I assume that the current drive is working and you'll be duplicating the data on it to the new drive. If I'm wrong, please let me know.) One of the drives will be pinned as master (single master/single drive) and connected to the end of the ribbon cable; the other pinned as slave and connected to the inline connector. They get mounted one above the other in the drive stacking tray that's in the Mac. The new drive will come with the jumpers, mounting screws and a spare ribbon cable, so you'll have all that you need).
If you need help with this, let us know after you've purchased the drive (pin setting positions vary on different brands). Don't drive yourself crazy with the installation manual that comes with the drive, which is confusing and Windows-oriented. Also note that the accompanying software CD is useless for Macs. You'll instead simply use Disk Utility to initially format (initialize) the drive.
As for cloning, I think that the most user-friendly software is SuperDuper, which I'm pretty sure you'll find to be a snap to use. (I'm a long time fan of CarbonCopyCloner, but recently tried SuperDuper to familiarize myself with it and was very impressed by how friendly it is.) It walks you through the volume duplication process in a few easy steps.
Gary
1GH DP G4 Quicksilver 2002, 400MH B&W rev.2 G3, Mac SE30 Mac OS X (10.4.2) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

Question about replacing hard drive

Hey everyone. I had a question about replacing a hard drive for a 2012 midyear pro. I have replaced hard drives before on windows machines, but this is the first mac I have owned. It didn't come with a hard drive when I bought it, but I do have mavericks installed on a usb. As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct? As far as I am concerned, hardware is hardware and should be the same as replacing a hard drive on a dell laptop but wanted to see if apple has any weird restrictions.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive. Thanks
Excuse and ny ignorance as I am new to macs.

scottrf8 wrote:
As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct?
Yes. Any SATA drive will do with those specifications.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive.
Assuming that the installer is functioning correctly, install the HDD in the MBP and engage the installer. You should come across a 4 option menu. Select Disk Utility from it. Open Disk Utility>Erase and format the HDD to Mac OS Extended (Journlaled). One you finish that, you may install the OSX.
Ciao.

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

Can't instal Windows 7 to new hard drive

Hello everyone,
I was looking for solution for a while, but cant find it, so I really hope you'll help me here !
First of all, I 've been using my pc until I received the S.M.A.R.T. warning about possible hard drive failure soon, and one morning PC didnt start - one of the hard drives was dead (in my hp model there are two hard drives). After finding out which one was it ( I tried taking one hard drive out, leaving the other and vice versa) I bought a new 500 GB hard drive. Aparently the damaged hard drive was the one with operating system, because of startup message which told me that operating system not found. Nothing fancy, just instal windows like I always did, or so I thought ..
Got my USB flash drive with Windows 7 64 bit, plug it in, the usual windows instal guide loads up. I choose my language , keyboard input etc . At the point where I have to choose "where do I want to instal my windows" I see two hard drives: 1) disk 0 Partition 1 (my old original 232 GB stock drive) and 2) disk 1 Partition 1 (new recently purchased 500GB drive).
So ofcourse, since I replaced old hard drive with the new one I just bought, put it in the same slot, naturaly I chose my location for windows - new hard disk 1 Partition 1. When I highlighted it, a yellow mark apeared at the botom which said "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu".
Ok, so I tried to continue anyway, I pressed next and windows began to instal, took about 10 - 15 mins. Everythings normal until first restart part before completing instalation. PC restarted and .. Windows instalation setup started once more from the begining. So I thought , ok I ll try to instal to the old hard drive disk 0 Partition 1 ( this time there was no yellow warning mark). So instalation began again , restarted , and ... Once more instalation setup starting from begining !
I am really lost here, I tried replacing hard drives places whith each other, or leaving just one of them, every time windows starts instaling from begining ! Allthough, everytime there are less and less disk space, which means it actualy is instaling.
So any thoughts where to start ?
I would be so greatful for your help,
And see ya

Hi @Seniunas ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
It is my understand that one of your two hard drives failed. You have replaced the failed drive and are having a difficulty installing Windows 7 from a USB stick.
I have some questions.
What is your exact model of n DV9700 notebook?
How Do I Find My Model Number or Product Number?
Is this a retail version of Windows 7?
Were your drives setup in a RAID configuration or just two individual drives, one being the boot drive with Windows.
You could try this, I am not sure if it will work.
Remove the 232 GB drive completely from your system.
Boot to your Windows 7, USB stick and let Windows format the drive before it installing Windows.
If this completes successfully, make sure the boot order is set to boot to that drive and test it.
If you are then able to boot into windows, shut down the notebook and reinstall the secondary drive.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine

When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine.

SMART is a technology that monitors the drive for signs of impending failure. You can verify that SMART is indicating a problem in Disk Utility. Select the hard drive and look at the bottom of the window. It should look like this:
If the SMART status is not "Verified" then you should back up your drive and start shopping for a new one.

Run windows 7 on external hard drive?

I'm purchasing a MAC mini to replace my G4 and PC. I would like to have Windows available for several applications (mainly for the kids) and am wondering if I could install windows on an external hard drive and run it through the Mini. I really don't want to partition the Mini's HD for both OS as I prefer to stay as far away from windows as possible. Thanks.

It all depends on the PC motherboard and BIOS, I don't even think MS has done anything draconian or such, and it is possible and actually easy, with the right X58 say motherboards (most). My Intel DX58SO I used to install via built in eSATA.
There is nothing wrong with or reason to fear Windows, but if kids want to play games, a VM isn't going to cut it. Buy a cheap mini just for Windows, or a PC, or run OS X off external drive and use the internal for Windows only.
Windows 7 + MS Security Essentials is solid and best yet and as easy to use and not all that different than Mac OS (and maybe has had more testing even). Hopefully computers can be seen for what they are, used as tools, objectively.

Can I run just windows on a second hard drive in my MBP?

I'm looking to run windows apps but dont want to put windows on the same hard drive as the mac os.

Read the Bootcamp Installation instructions. http://www.apple.com/support/bootcamp/
Windows must be run on the main internal drive. Windows will not boot from an external drive.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

I replaced hard drive in macbook pro and when turning on i get a blinking question mark

just replaced hard drive on my '09 macbook pro and rebooted to get the blinking question mark. what do i do? not sure i have the installation disk. i had this happen once on an older macbook and was able to figure it out but i can't remember what i did.

Schedule an appointment with a Genius the SSD is gone.

How to replace hard drive in mini 110-3131dx

Trying to replace hard drive in the mini 110-3131DX..... I have a replacement ... How do I open the case. I see a orange slider bar in battery compartment, but no screws to take out or covers to remove. It has a solid no opening base except where the battery is removed.
Thk
This question was solved.
View Solution.

You're welcome, Tim.
What operating system are you installing on the machine?
The specs state it shipped with W7 Basic. That OS should load without issues.
If you are trying to install XP, it will not install unless you load the SATA ACHI drivers either at the F6 prompt or you need to slipstream them into a copy of your XP installation.
If you are attempting to install XP, please read this link below and that should solve that issue.
Your notebook has the Intel NM10 Express Chipset.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
Best Regards,
Paul

Since replacing hard drive, "restore previous session" button doesn't work, can only do it through history tab. Also will not start up from task bar icon.

Hi, been using Firefox for some years, had to replace hard drive recently and re loaded Firefox. Since then, the restore previous session button doesn't work, but I can do it from the History tab. Also Firefox itself won't start from the task bar or desktop, only the start menu.
Using Windows XP

This function may not be available for mobile yet. You can put your suggestions to the [[Suggestion Box]]. Thanks!

Replaced hard drive- will not reboot

Replaced hard drive on hp compaq mini cq10- 120ca because it quit working and the diagnostics said the hard drive was no good. Had a back up flash drive, but when I tried to reboot it says the bootmgr is missing. The mini did not come with any back up cd. What can I do to remedy this, and how can I verify the flash drive is bootable. When I connect the flash drive to another computer it looks like all of the backup files are there. It had windows xp home on it. Thank you.

Hi Tomilly,
The easiest way is to get a recovery image from HP, please call HP call center and request a recovery image either via USB drive or CD type depends on your configuration.
If your original HDD is still workable, please re-install this HDD back. Boot up the system and locate the HP recovery manager, there shall be an option to create recovery media which can store all your image including the OS to the media.
Best rgds,
Kick_OK
I work for HP.

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

Windows 7 installation on Replacement Hard Drive

Similar Messages

Maybe you are looking for