Windows 7 Installing itunes 10.5.1 trying to fix this bug
itunes.exe entry point not found AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Another poster says he gets to the end and it says there is a missing file and has done the download a couple times with the same result.
Might be good to wait a day and see if it gets cleared up.
Similar Messages
-
When I click on "iTunes store" I get the error code 0x80090318. Also when I click on home sharing I get the error code -2146893032.
This is the second time I have installed this and won't work. Please help.
I have Alienware / Windows 7 home ed. 64 bit.Hi luvthesuns,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are getting a few error codes. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iTunes: Possible iTunes Store errors - Apple Support
iTunes Store reporting error 0x80090318
Apple software on Windows: May see performance issues and blank iTunes Store
Troubleshooting Home Sharing - Apple Support
Cheers,
Mario -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
<Subject Edited by Host>For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find path to any folders containing installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed computer. Windows update as suggested in some posts does not assist either.
Can anyone assist me? Thank you so muchShould the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I keep getting an error message that says "The administrator has set policies to prevent this installation" when I try to install iTunes. I have tried everything on the website. When i try to remove the components of iTunes I get the same message. How can I download iTunes?
Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you? -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
i have a windows 7 operating system on my laptop and it keeps saying I have installed itunes wrong?? i have done this activity three times now and do not understand the error? what di I have to do to fix the problem?
What's the precise text of the error message, please? (There's a few different ones I can think of that you might be getting.)
-
Dear supporter
I couldn’t install iTunes on my laptop and showed me “This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor ‘.Windows of my laptop is win8 Enterprise Build 9200, 64bit.
Best regards
MajidTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
im trying to install itunes but a message pops up saying this version is for 32 bit please use 64 bit installer, help?
Okay ... try seeing if you can download an iTunes64Setup.exe from the following download page:
http://support.apple.com/kb/DL1577 -
"there is a problem with the Windows Installer Package" Does anyone know how I fix this??
My itunes ends up being so out of date becuase I can never upgrade it.
I have a sports kit and want to make sure I am using the most uptodate version
I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
Please helpGo to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?
Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M. -
apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?
You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
See also Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Trying to return a defective Lenovo Mini Wireless Keyboard 57Y6336
I am hoping someone can help me since at this point I am completely frustrated. I received a Mini Wireless Keyboard Friday I ordered direct from Lenovo. It turns out it is defective and phone support has been completely useless as far as I can tell.
-
All I need is a link. A simple link.
Jeez, Adobe's website and its support function is WORSE than Microsoft! I have a valid licensed copy of Adobe Acrobat X Standard purchased last year with a new Dell machine. I had to reformat the machine, and so need to redownload THIS software. I ha
-
Lock a tcode for particular user
Hi Experts i need to lock few transaction for particular users only. we have n number of roles and the transactions have been assigned to some tcodes to be reasticted for a list of users. is there any method or program to built to restrict the users
-
Linking Delivery Items with Delivery Items having batch
Hello Fellow ABAPers, Does any one of you know how SAP links items in Delivery table (LIPS) without batches with their respective items having batch. For e.g. in Delivery Item we have delivery no. , item and batch. Assume we have delivery no 801xx an
-
Primavera P6 Analytics and Primavera Integration API
Hi, I am running the runetl.sh script, and getting an error. Here's the excerpt: transform [INFO] (Message) - === Step 1, Part 1 ==================================================== transform [INFO] (Message) - === Run the ETL calculation process (St