Windows 7 ISP image will not download on to hard drive

Hey I'm having a problem with downloading the windows 7 ISo image image to my hard rive when I first begin to run bootcamp and it request to install it onto the hard drive but when I drag and drop the ISo image it downloads perfectly I'm just trying to figure out why it won't download can anyone tell me how to trouble shoot this problem

Similar Messages

Drivers and Software will not work on new hard drive

Hello:
Pavilion DV7-4270us
Windows 7 64 bit
I installed new 500 GB hard drive into the above referenced notebook, as previously installed 640 GB hard drive from factory began to fail.
I have downloaded drivers and software for HP Media Smart, HP Simple Pass Fingerprint Reader, and HP Power Manager from HP Download page, and none of these work.
HP Support Assistant was downloaded and it works, however it says no updates needed.
Is this because I installed a hard drive not purchased from HP?
Thank you for any help you could provide.

No the laptop does not care where you bought the hard drive. Do you have any devices that are not working right in the Device Manager?

Disk utility & TechTool Pro will not recognize volumes on hard drive

My Powerbook G4 will not start up. This is what happens:
1. Startup chime
2. Hard drive starts to make a constant 'pause-click, pause-click' like a skipping vinyl record sound
3. Then I only get as far as the flashing question mark on screen
I have disconnected all peripherals. I have booted up from install CD and used *Disk Utility* and it does not recognize the hard drive, only the CDR drive. I have booted from the Apple Hardware Test CD. All hardware passes. I have booted off the *TechTool Pro CD* and tried to run the entire suite of diagnositc tests. All hardware passes, all drives pass, but when I get to Volumes and Files, none are recognized. I have tried to get to the *Startup Manager*, but I can't get to that point either, only as far as the flashing question mark. I would like to be able to salvage data from the harddrive, so haven't tried to reinstall software and OS.
It seems to me that the hard drive is probably dead and I probably need to replace it, but is there any hope to recover data from the old hard drive
Any suggestions on what else I might try or on confirming my tentative diagnosis, would be greatly appreciated. Thanks

Thanks for the quick reply Tom,
I mostly save my work related documents on external flash drives or zip drive media, so my most important data for the most part is backed up. However, I had gotten a bit unattentive with personal interest stuff, like photos, music etc. I'll probably think of something important months from now and realize it was only on that drive, but for now I am most concerned about my downloaded emails and email addressbook. I never thought to back those up. Makes me want to stop running Thunderbird and keep all my emails online. Anyway I have some recent business inquiry emails from new contacts that are stuck on that drive. Can't recall the exact name of the organization this person was with. Aghh.
Think there is any use trying one of those data recovery programs to see if I could extract some information from the disk?
I am realizing that I will probably need a new hard drive to get the computer running . A friend's dad who is a computer teacher (though mostly PC but has kids with Macs so he's been working with Macs a bit and learning) mentioned the possibility of putting in a new hard drive as the start up drive then installing the old one as a secondary hard drive so I can try to access my data that way. Think that sounds like a feasible option to try? Perhaps I could run the recovery within that configuration. Worth a try? Pointless?
I appreciate any words of wisdom or commiseration.
Thanks,
Applangel

Bios will not recognize the entire Hard Drive

I am running a MSI P7N SLI Platinum right out of the box. This is an entirely new build. For some reason when I go to install Windows XP, my entire hard drive space is not listed. My hard drive is 320GB and it will only recognize 130GB of it. How do I fix this problem. I am completely new at building a system so try and keep it simple please. I will admit that I am terrified at the idea of flashing my BIOS. I dont want to void the warranty nor do I want to destroy the board and have to buy a new one. Any help would be greatly appreciated. I have listed my specs below.
Case: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
Power Supply: Thermaltake W0106RU Complies with ATX 12V 2.2 & EPS 12V version 700W Power Supply 100 - 240 V CE, CB, TUV, FCC, UL, CUL, and BSMI certified
Motherboard: MSI P7N SLI Platinum LGA 775 NVIDIA nForce 750i SLI ATX Intel Motherboard
Processor: Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor
Video Card: MSI NX8800GT 512M OC GeForce 8800GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
Memory: Corsair DDR2 XMS, 6400C5DHX (2 x 2GB) 4 GB 800mhz 5-5-5-18, 64 bit OS Quad
Hard Drive: Western Digital 320 GB SATA, 8MB Buffer, 7200RPM

Quote from: killiach on 01-April-08, 09:51:25
Oh, there is the rest of my Hard Drive. To allocate, I just right click and hit "New Partition" and follow the steps? Furthermore, do I need to make this an extended partition or primary? I am just going to use this larger partition for storing programs and games.
Also, my driver for my hard drive is 7 years old. Think I should update the driver?
"Also, my driver for my hard drive is 7 years old. Think I should update the driver?"
Nope, just install chipset drivers for your board.
"Oh, there is the rest of my Hard Drive. To allocate, I just right click and hit "New Partition" and follow the steps?"
Yes
"Furthermore, do I need to make this an extended partition or primary?"
Extended. When its done right click and format the newest partition in NTFS.

How can I restore Windows 7 to Bootcamp partition - not reformat the entire hard drive?

Hello Apple (Mac) Community,
I originally posted this question over on answers.microsoft, but no help was forthcoming. Hope someone can help me with a problem that's (almost) making me nuts! I teach graphics to college students. In brief: I run Windows 7 Pro 64 on a Mac Pro tower, along with Snow Leopard (OSX). Windows is loaded on one partition of a 1TB drive. The other partition is a Mac backup. The Mac OS is on a different drive. Everything was going swimmingly with both OS, until recently. Unfortunately, the drive with Windows showed problems and I determined that the HD was either toast or needed a total reformat. My Mac data was all backed-up. Now I wanted to backup Windows so I can easily get back to the relatively happy point of my Windows 7 experience (drivers loaded, dual monitors all working, etc.). I did some online searching and the recommendation was to create a "system image" of the existing Windows 7 install by attaching an external drive, formatting that to NTFS and selecting "backup to image" in Windows. I did that and also took the opportunity to "create a backup disc" on a DVD. (Windows recommended). Next I rebooted back to Mac OS and completely reformatted the problem 1TB disc to a single partition, zero all data, just to see if it would actually reformat. It all worked! So far, so good. Next I used Bootcamp to create two partitions, one for Windows. I then restarted using the Win7 Pro (64) install disc, reformatted the Bootcamp disk to NTFS (as required) and installed Windows 7. After all that is completed and all working, I next try to use the restore from image function while booted in Windows. I'm instructed to restart from the Win install disc, which I do. Here's where things get difficult. When I try to choose restore from image, at that point the installer asks which drives to I want to exclude... but does not show partitions, only full HDs. I do not want to reformat the entire 1TB drive. I only want Windows on the 120gb Bootcamp partition (which is already formatted for Windows BTW). I spent a lot of time online reading through articles with users having the same frustration.
So here (at long last) is my question: How can I either restore Windows just to a Bootcamp partition... using "Windows System Image" or if that can't be done... can I somehow import all of the settings, etc. from the "image" (image is on external HD) into a fresh Win 7 install? So far the "backup disc" also seems useless. I can't even boot to Windows from it. BTW Apple folks: the only response on the MS side was that some "expert" simply posted links on how to install Windows and restore... not helpful with my particular problem of restoring to a partition.
Any help would be appreciated! Hopefully some help that even a Mac user / new Windows user could understand would be better! Thanks!
-melt

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

(Resolved) Windows 8 - Recovery Discs Do Not Work With New Hard Drive

Update:
I decided to buy drive cloaning software. I cloned my drive, that resolved the problem of installing the OS on the new drive. Too bad neither HP's Restore disc's or this support fourm could help with this issue.
Origional Post:
Product Name: HP Pavilion G4-2235DX
Product Number: C3Q50UAR#ABA
BIOS: Insyde F.26, 2/21/2013
Processor: AMD A6-4400M APU w/ Radeon HD Graphics, 2700 Mhz, 2 Core(s)
BIOS Mode: UEFI
SMBIOS Version: 2.7
RAM: 12GB
Operating System: Windows 8 - 64bit (6.2.9200 Build 9200)
Situation: I purchased this computer new as a refurbished model from a retail store. I created system restore discs after initial setup using the HP Recovery Media Creation Utility. This system has a 500 GB hard drive. I purchased a Western Digital 1 TB hard drive to upgrade the drive in this notebook. After swaping out the drives and trying to load the recovery onto the new 1TB hard drive in the same computer, an HP dialogue so states "This PC is not supported by the System Recovery Discs. You will not be able to continue to recover this system with these discs." It gives a code (doesn't call it an error code) 0110-C3150UQ43#ABA underneath and only option is okay, the system reboots and follows the same pattern again and again.
I have upgraded drives in the past on Vista and 7 the same way using self created HP recovery discs with no issue, I do know what i'm doing. I've seen discussion mentioning BIOS issues and other such problems. I did try updating the BIOS to the one on the HP Support page (2013-03-01 , Version:F.26, 7.76M) and the recovery discs still will not work. I found the CyberLink Recovery Discs Utility thread, however this solution/software has no support for Windows 8. I have tried to run the utility and it fails, tried with compatiabity and it failed. Why is this happening and what can be done to resolve this problem?
I tried using chat support but it won't let me get through to anyone, claiming my warranty is expired. I just bought this computer 3 days ago and was assured a 90 day warranty.
Please help, Thanks.

Hey Joe907,
Thanks so much for posting your experience and using the Forum. I came across this thread in my research for another thread. The information you provided helped me confirm my suspicions.
I wanted to mention to you, if you want, you can have this post marked as solved by hitting Reply to your original message and just post your update:
Update:
I decided to buy drive cloaning software. I cloned my drive, that resolved the problem of installing the OS on the new drive. Too bad neither HP's Restore disc's or this support fourm could help with this issue.
in the Reply and click Post. Then you'll have an "Accept as Solution" button on your second post. Click that "Accept as Solution" button on your second post and the thread will be marked as solved. By being marked as Solved, the thread will be much higher in Google search results and it will more likely to help others. Not sure if you're concerned about it, but you'll also get the credit for authoring a solution.
Also, I wanted to apologize for the customer service issues you had. I hope that everything is working well with the computer now. Of course, if it's not, let me know. I'll be glad to help in any way I can.
Information on the warranty:
Refurbished computers are often erroneously marked as out of warranty, but it is simple to fix, and a phone representative could have corrected that for you. All computers' warranty start dates begin on the day they leave the factory. HP knows that there will be a period where the computer will sit on a shelf (for days or months) at the retailer. With refurbished computers, their 90-day warranties begin on the day they are refurbished. HP has no way of knowing what date the customer will buy the computer so the warranty start date stays the same until the customer registers the computer providing the date of purchase for the warranty system to be updated. If the registration process fails for some reason (rare, but it happens), phone technical support has a process they can initiate to have the warranty corrected. They only need a copy of the receipt showing the date of purchase.
I hope this information helps! Please let me know if you have any questions and thanks again for you post!

Power Mac G4 will not Recognize any Internal Hard Drives

My G4 was working fine and I wanted to install a driver for a 'Twin Turbo Mac Video Card' I had in a PCI slot but it required OS9 running. At the time, I had two internal drives 230 and 120 G running 10.4.11 but no OS9. However, I did have an external Firewire Drive with OS9 and OSX. I set my "Startup Disk" preference to boot from FW drive and selected OS9 then shut down my G4. When I powered back on I got the standard "gong" but on my display I saw a "Mac Folder and a Question Mark". I believe that means the system can't find a drive. Is that correct? I reverted back to my original configuration with the internal drives and the FW drive disconnected and I still see the "Folder and Question Mark". I inserted the Tiger DVD, held down the "C" key and it still will not boot from the DVD either. I once again tried connecting a FireWire External drive with OS 10.4.11 installed and the internal drives disconnected and still no bootup. I swapped out Memory, replaced the Motherboard and the battery and even tried resetting the PRAM. Still that stupid Question Mark is showing!! This has really got me puzzled. Any ideas or suggestions out there?
bh

Depressing/holding the Option key at startup activates the Startup Manager (not open firmware). The resulting window shows all of the available startup volumes (hard drives, CD, DVD, etc).
Look at A flashing question mark appears when you start your Mac
http://docs.info.apple.com/article.html?artnum=58042
Will it boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
*Resolve startup issues and perform disk maintenance with Disk Utility and fsck*
http://docs.info.apple.com/article.html?artnum=106214
I'm not sure it would resolve your problem, but try a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
 Cheers, Tom

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

Itunes will not find my external hard drive and music on it

I have downloaded itunes onto new laptop that has windows vista all the music is stored on an external hard drive. When i plug in the hard drive it no longer finds automatically the music file and runs it as it did on my old pc with windows xp. I have changed the location to find the music in itunes but no luck. If i go into my computer and look at the external hard drive and click on any song it then opens itunes and plays it! Help please

When you say "when i double click on my itunes files it just opens up this list of music." it doesn't mean anything to me. You need to explain clearly, remember I only know what you tell me.
I need to understand how you have things set up and if you had you iTunes library database on the external drive or the c: drive. That is the iTunes folder containing iTunes library.itl.
What do you see when you open iTunes on the new PC, are your music files there. If not, every time you play a track it gets added to itUnes so you should at least have some files in your library.
What problem are you trying to solve? Is just getting the tracks into your iTunes library, or are you also concerned about ratings, count and playlists from the old PC. If so do you still have access to the old PC?

My computer will not identify my external hard drive, help.

I have hard drive from windows 98 connected to my windows 2000 with usb 2.0 to ide adapter. my windows 2000 will not identify external drive.

Let me know who is your Internet Service Provider ... so that i can tell you few manual steps to confiogure the router. ...

MacBook Pro will not boot - have replaced hard drive and problem persists

Macbook Pro Mid 2010
4gb ram, 2.4 GHz Intel core 2 duo
Originally when I received a folder with a flashing question mark upon startup, I assumed I had a failed hard drive. I went ahead and installed a new 500GB hard drive in my machine and installed OS X Snow Leopard. I upgraded to OS X Mavericks, and I had everything running properly. The next day, I went to startup and my Mac would not boot again. The dreaded folder and question mark were back.
I'm wondering what else could be causing this problem? Is it something I can diagnose and repair myself or will I be better off taking it into someone at this point?
Thank you!

You can try replacing the hard drive cable...
Have you tried resetting the PRAM and SMC?
Does the hard drive boot when connected externally?

Laptop will NOT Shutdown after a hard drive installation

We have been rebuilding a Pismo from scratch basically. The last part was the hard drive which we did yesterday. It too awhile to get the computer to boot up but when it did it worked perfectly - or so we thought. After replacing all the contents of a broken iBook (cloned backup), we used it for a while and things worked fine. Unfortunately, it will not shutdown. Using shutdown ... it closes all the files and then just sits there with the desktop open. Tried several things and it just won't shut off. Any ideas?

Hi, and welcome to Apple Discussions.
Are you talking about the Pismo not shutting down? Or an iBook?
Have you tried forcing a shutdown by holding down the power button for 5-10 seconds? This is how to force an iBook to shut down.
Every time you have to do a forced shutdown instead of a normal one, there is a chance of hard drive damage and you should repair the hard drive, either by booting into Safe Mode OR by starting up from the Mac OS X Install disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with either Safe Mode or the Install disc's Disk Utility, then start up normally and repair permissions from Disk Utility in the Utilities folder on the hard drive.
If it continues to have problems shutting down, you may want to try resetting the PMU.
Good luck.

Hard Drive Tray will not fit after attaching hard drive

(From Davin Oishi)
Issue: After installing the hard drive onto the hard drive tray, the tray will not longer fit into the Smart Storage hard disk drive slot.
Using hard drive tray screws from the legacy NSS2000, NSS3000, NSS4000, or NSS6000 may encounter this issue.
Resolution: Be sure to use the hard drive screws that are supplied with your Smart Storage device. Smart Storage ships with screws for both 3.5" SATA drives and 2.5" SATA drives.

If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

Macbook Pro will not recognize my external hard drive

I just updated to a newer MacBook Pro. I ran Time Machine on my old Macbook from a 2TB external USB hard drive. When I hooked the hard drive to my new Mac, it wouldn't allow me to select it as the drive for Time Machine. So I dismounted the hard drive and hooked it back to my old macbook to see if it still registered there (which it did). Now when I try and hook the hard drive to my new macbook, it will not recognize it at all. First question, why will it not recognize my new macbook, and second question, why does Time Machine not recognize the hard drive? It has my old time machine files on it...hopefully I don't have to reformat it and lose all my backup??

My hard drive is now connected. But Time Machine will not let me select the hard drive as my back up drive. This hard drive was used on another Macbook, so Time Machine doesn't seem to recognize the hard drive on the new one. Do I need to reformat the hard drive? I hate to do that because I have the previous backups on there.

Spotlight on my iMac running snow leopard will not stop indexing the hard drive. How can I stop this?

Spotlight on my iMac (OSX 10.6.8) has suddenly begun indexing the hard drive non-stop, causing very sluggish operation and spinning beach balls. Reinstalling the operating system has not helped, nor has repairing permissions or the disk.

One of the first things that happens when installing a new version of OS X is that the Spotlight search app is setup to index all available hard drives.
The indexing makes it faster and easier for the Spotlight Search app to find things on and off your Mac.
You can either let it take the time it needs to do this (Spotlight will only do this one time, initially) OR if you just can't or want to wait for this to complete, you need to go into OS X System Prefences panel in the OS X Dock, locate the Spotlight icon.
Click the Spitlight icon and another set of menus appear.
Find the menu item dealing the Spotlight indexing and uncheck its checkbox to disable Spotlight indexing.

Windows 7 ISP image will not download on to hard drive

Similar Messages

Maybe you are looking for