Windows 7 itunes 64 bit installation errors

My operating system is Windows 7 64 bit but when I try to install iTunes for 64 bit Windows it says i have installation errors. I have removed all my iTunes and other Apple software from my computer and tried again but i still get the same installation errors (it just says errors without specifying any specific error). I need to install iTunes. Please help. Thank you. Bruce.

I had to insert the USB drive after the boot camp wizard restart had occurred. I then ran into problems once I tried to install the boot camp drivers in Win 7, but that's a different story.
Have you had success? I'm struggling getting the audio to work.

Similar Messages

  • DDE server window; itune.exe-application error

    Can t open itune: DDe server window: itune.exe-application error. Then, instruction at 0x6d561040 memory could not be read.  P.S.: the code change every time i click ok.

    I do not know the answer to this, but if you are willing to to do some troubleshooting:
    Which version of windows are you using?
    XP vista or 7, 64 bit or 32 bit.
    Do you have Quicktime? If so does Quicktime launch?
    Did you change anything on your computer just before this problem started?
    Please look in the Event viewer for a helpful error message.
    To open the event viewer:
    Control Panel>>Administrative Tools>>Event Viewer
    Or type Event Viewer into the search box.
    Then select Windows Logs>>Application
    Open the Event viewer immediately after iTunes crashes.
    The error message should be at or near the top.
    Double click on it to open more information and press copy.
    Paste the result into your post.
    You are looking for a message starting something like this:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: iTunes.dll

  • Photoshop CS5 32 Bit Installation Errors, Windows 7 Ultimate

    Today I did a second install of Photoshop CS5, in a 32 bit Windows 7 virtual machine that is otherwise in fine health (up to date, yada yada).
    The Photoshop installer package I had used prior to do a perfectly successful installation on my x64 Windows 7 system didn't have quite as good luck on my 32 bit system...  It wouldn't do a default install at all, and even when I disabled UAC and configured all the options disabled (no need for 'em for my testing), it still emitted some errors - though in the latter case it actually completed the Photoshop installation and I was able to run Photoshop.
    Note that after the first failure I disabled UAC.  All installs done from an administrator account, though I did not run the installer as administrator while UAC was on.
    This is not a big deal - what I needed to test with did finally get installed, but I thought Chris or someone at Adobe might like to know what the installer barfed on.  Here's what it reported:
    First install, failed utterly:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 10 fatal error(s), 23 error(s), 6 warning(s)
    WARNING: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
    Family: Photoshop
    ProductName: Adobe Photoshop CS5 Core_x64
    This parent relationship is not satisfied, because this payload is not present in this session.
    WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
    WARNING: OS requirements not met for {E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6}
    WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
    WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: 6 Failed to add Font 'C:\Windows\Fonts\ACaslonPro-Bold.otf'. Error: 2
    ERROR: 6 Command ARKFontCommand failed.
    ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\ACaslonPro-Bold.otf'. Error: 2
    ERROR: 6 Error rolling back command ARKFontCommand
    ERROR: 6 Failed to add Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
    ERROR: 6 Command ARKFontCommand failed.
    ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
    ERROR: 6 Error rolling back command ARKFontCommand
    ERROR: Payload {1D809D80-28A4-11DF-A816-0024E8692489} has an action "install" but no resultState
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe Bridge CS5: Install failed
    ERROR:  - AdobeColorCommonSetCMYK: Install failed
    ERROR:  - Adobe ReviewPanel CS5: Install failed
    ERROR:  - Adobe Photoshop CS5 English Language Pack_AdobePhotoshop12-en_US: Install failed
    ERROR:  - Adobe Linguistics CS5: Install failed
    ERROR:  - PDF Settings CS5: Install failed
    ERROR:  - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
    ERROR:  - Adobe CSXS Extensions CS5: Install failed
    ERROR:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR:  - Required Common Fonts Installation: Install failed
    ERROR:  - AdobeColorNA CS5: Install failed
    ERROR:  - AdobeColorPhotoshop CS5: Install failed
    ERROR:  - Recommended Common Fonts Installation: Install failed
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{8CCA90E1-F5BA-456F-84BF-AD5FB2CCE13F}' from zip file 'E:\payloads\AdobeCSXSExtensions2-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{56540320-C921-1029-83D9-FE864D1FC1DF}' from zip file 'E:\payloads\AdobeReviewPanel2-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{AE9B837F-D135-42FC-BE03-33545B5DCBDC}' from zip file 'E:\payloads\AdobeWinSoftLinguisticsPluginAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{39CB2E53-5326-4939-8B5A-0402C6EFBFE3}' from zip file 'E:\payloads\AdobeColorCommonSetCMYK3-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: 1 sqlite step: (21) SQL logic error or missing database
    FATAL ERROR: 1 sqlite finalize: (13) database or disk is full
    FATAL ERROR: 1 CreateUninstallDataBase failed on command ARKMoveFileCommand
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{6C7D437A-D2E9-4FE9-A4D9-A6329860835C}' from zip file 'E:\payloads\AdobeLinguisticsAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{0D067D13-C3D7-4EA6-B346-740CD91FD547}' from zip file 'E:\payloads\AdobeBridge4-mul\Assets1_1.zip'. Error 8 Not enough storage is available to process this command.
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}' from zip file 'E:\payloads\AdobePhotoshop12-Core\Assets1_1.zip'. Error 8 Not enough storage is available to process this command.
    Last install, with no options selected (including, notably, deselection of the fonts):
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 8 error(s), 6 warning(s)
    WARNING: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
    Family: Photoshop
    ProductName: Adobe Photoshop CS5 Core_x64
    This parent relationship is not satisfied, because this payload is not present in this session.
    WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
    WARNING: OS requirements not met for {E39A5ABD-516B-46F9-A042-694BBA6A4E08}
    WARNING: OS requirements not met for {E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6}
    WARNING: OS requirements not met for {E995AC53-954A-48D2-A861-613B8D42A9BE}
    WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
    ERROR: 6 Failed to add Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
    ERROR: 6 Command ARKFontCommand failed.
    ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
    ERROR: 6 Error rolling back command ARKFontCommand
    ERROR: Payload {1D809D80-28A4-11DF-A816-0024E8692489} has an action "install" but no resultState
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe XMP Panels CS5: Install failed
    ERROR:  - Required Common Fonts Installation: Install failed
    FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}' from zip file 'C:\TEMP\Photoshop\Install\Adobe CS5\payloads\AdobeXMPPanelsAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
    -Noel

    This is for people who might find this thread via a search:
    The errors I reported above (e.g., those with the .otf fonts) are related to the configuration of the "3 gigabyte address space" option, invoked by the switch /3GB in boot.ini (XP) or bcdedit /set increaseuserva 3072 (Windows 7 and Vista), which is what I was experimenting with when doing this installation.
    I dropped back to the default 2 GB setting (bcdedit /set increaseuserva 2048) and tried a reinstall to confirm, and indeed the install went through smoothly.
    Trying to increase your address space in a Windows 32 bit operating system through tweaking has known downsides; consider moving up to an x64 operating system instead to be able to access more RAM.
    -Noel

  • Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

    I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4  and my operating system is windows 8.1.
    I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled  the HP folders.
    Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE  C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf   (that's the translation from Italian)
    I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
    If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
    thanks in advance fot your help.
    denise

    Hi @denig,
    Welcome to the HP Forums!
    I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
    Please try the following solutions:
    Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).  
    Clean boot the computer. How to perform a clean boot in Windows.
    Make sure no antivirus programs are running. Turn Windows Defender on or off.
    Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
    Re-install using the HP Printer Install Wizard for Windows.
    Hope this helps you resolve your issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Envy 5640 - Windows Vista Driver Installation Error - Please Help

    Hi
    Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
    The printer is up and running and working perfectly on our iOS and OSX Mac devices.
    The PC can see and communicate with the Printer.
    But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
    <<
    Install Failed
    The software required for your printer could not be installed.
    For more information click the Details button below.
    DETAILS...
    The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
    >>
    Then when DETAILS... button pressed:
    <<
    Installation Error
    Key not valid for use is specified state.
    >>
    I haven't entered a key, nor a state? I'm in the UK.
    Any ideas?
    Thanks in advance
    Dave

    Hello there! Welcome to the forums @Stodgy70 
    I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
    After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
    Here is the direct link for you to download and install the printer on Windows Vista:
    HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
    Please let me know the results, have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • "Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

    I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
    I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
    I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
    However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
    pasting the path to the file and dragging the file to the VM, but no luck.
    If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

    Hi,
    According to your description, I would like to confirm if you have unchecked the Express installation box.
    Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
    I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
    Using Parallels Desktop to install Windows and the dev tools on your Mac:
    http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
    Regards,
    Kelvin hsu
    TechNet Community Support

  • ITunes Producer installation error

    iTunes Producer gives me this installation error:
    "The installation failed.
    An unknown installation error occurred.
    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    I'm using a MacBook Pro, OS X 10.6.8, 2.53 GHz Intel processor, 4 GB RAM, with 30 GB of space available on my hard drive. I've already contacted iBookstore Publisher Support. They sent me here. Any ideas?
    Thanks for your help,
    Josh

    I just installed Snow Leopard from install DVD 10.6 and then used software update to insure I have the latest system everything on this MacBook Pro with Intel Core Duo 2.4 GHz processor, 2GB ram, 133 GB available space on the hard drive.
    I get the same error as above.
    "The installation failed.
    An unknown installation error occurred.
    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    Not only that, I also tried the installation on a recently purchased Mac Mini. Same problem.
    Any hints, folks? It's annoying that the only install of iTunes Producer I can use is on my old, out of date Mac that I am now afraid to upgrade the system on because if this keps happening, I won't be able to upload to iBooks at all.
    -ctan

  • IDES 46E with windows 2003 server Installation errors..

    Hi,
    Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
    1.Windows 2003 Server
    2.JDK.142
    3.Oracle 9.0.2 with 7 patch
    4.IDES 46E
    Installed successfully Database and SAP but while exporting data in to tables then getting errors.
    Thanks in advance..
    Sreedhar

    Hi GreetZ,
    I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
    Thanks for your replies..
    Sreedhar

  • Windows 7 64-bit Installation Error "Could not find appropriate listener"

    *11.2.0.1* Installation fails on Win7 Professional 64-bit
    1) Installed software (did not create database initially)
    2) Create Listener via Net Config (no apparent problems here)
    3) Added DB to Listener via Net Mgr
    4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
    My Listener services is started.
    All current updates have been applied to Win 7.
    I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
    C:\Users\scott_hp>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
    :11
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 09:47:07
    Uptime 0 days 0 hr. 29 min. 7 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
    etwork
    \admin\listener.ora
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully <gphmh>
    Edited by: svk1965 on Feb 20, 2012 7:17 AM
    Edited by: svk1965 on Feb 20, 2012 7:22 AM

    svk1965 wrote:
    FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
    C:\Windows\system32>lsnrctl stop
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
    :24
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
    The command completed successfully
    C:\Windows\system32>lsnrctl start
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
    :51
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
    ert\log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 0 min. 5 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    C:\Windows\system32>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
    :30
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Services Summary...
    Service "mmmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

  • Itunes 10 installation error -  Windows installer package

    When I try and install I tunes 10 i get this error. "There is a problem with this windows installer package a program required for this install to complete could not be run. Contact support personnell or package vendor"

    I also had this problem, and looked at variatent solutions such as clean unistalls and DEP conflicts within windows itself.  I even talked to the genisus team at my local apple store!! all were'nt able to solve this problem.
    However, i done some research into the problem and realised that the problem was with the Apple Update software that is downloaded during install. 
    so i ran the udate program thing that the computer wants to update itself and ITUNES INSTALLED!  to do it your self before you upset your registery is go to-  C:\program files\apple updates and double click on the blue globe icom and in my circumstance itunes installed.  I hope this helps and i hope Apple would offer me the job better that their own tech guys.

  • ITunes 10 Installation Error: Windows Installer

    I'm sure this is a common issue, but I have yet to even solve this problem and I am in need of assistance. Topic with same issue: http://discussions.apple.com/thread.jspa?threadID=2599360
    I have uninstalled a previous version of iTunes to upgrade to iTunes 10. When I finished downloading it, I go into the installation process. Right in the middle of the installation, an error message pops up with this:
    +*There is a problem with this Windows Installer package.*+
    +*A program required for this install to complete could not be run.*+
    +*Contact your support personnel or package vendor.*+
    I've tried many solutions while I lurked the internet:
    -Run As Administrator
    -Installed the Latest Updates
    -Updated Windows Installer
    -Cleared Unworking Registry Files
    And some I may have forgotten, but I'm sure I covered all of it.
    I'm still given the same issue after all that.
    Is there something that still needs to be done?
    I'm running on an Acer laptop with Windows Vista.

    Thanks for the help, polydorus!
    But now I have another issue.
    Before I had the iTunes problem, my sister gave me her iPod Touch 3G, which has been synced on her laptop before. I resetted via the Reset Options in the iTouch, then after a reboot, it came up with the iTunes Logo, a +, with the USB iPod Connector. So, I did what it said. I pulled up iTunes and plugged the iTouch in... The iPod Touch doesn't appear on the list. I tried unplugging it and putting it back in, resetting iTunes... then I upgraded iTunes, and now I'm still having the same problem.
    So, my question is now... How can I get iTunes to find my iTouch?
    I tried uninstalling Apple Mobile Device, but unsuccessfully uninstalling it, I repaired it after being able to upgrade iTunes. Could that be an issue?

  • Windows Oracle x86_64 bit Installation Error

    Hi,
    I am installing a new system on Windows Server 2003 Enterprise R2 x64 Edition and Oracle 10.2 as the database. The product is R/3 Enterprise 4.7 X 1.10 SR1.
    According to the note 899111, I have taken the Installation master for R/3 4.7 X 2.00 SR1 and the export CD's from R/3 4.7 X 1.10 SR1.
    I have installed the Central Instance successfully, but while
    installing the database instance, I get the following error -
    CJS – 0030 Assertion failed : OraCommonParatersWin.
    computeDependantParametersAfterDialog: sapdataHome is empty after dialog
    Also, the database home field (with the drop down) is empty in this screen (after clicking next this error occurs).
    There were 2 notes - 969696 and 919106 which had the same error but the scenarios didn't apply to us.
    Please help me and let me know why this error is occuring, I have restarted the database instance installation several times and even downloaded the Master CD twice from the marketplace in case the file would have been corrupted during the download the first time.
    Thanks,
    Neha Bhardwaj

    Hi,
    you already checked folloiwng note which is for NW04s
    Note 919106 - SAP NetWeaver 7.0 SR1 Installation on Windows: Oracle
    this error occured during installation.
    but i suggested that you try folloiwng solution.
    CJS-00030  Assertion failed:
    OraCommonParametersWin.computeDependantParametersAfterDialog:
    sapdataHome is empty after dialog.
    Solution:
    Change the following line in the 'control.xml' file from
        if (!OraBackRel.isBackRel(dbSid) || "DB" == instanceType ) {
    into
        if ( "DB" == instanceType ) {
    Then restart SAPinst and choose "Continue old installation".
    regards,
    kaushal

  • WINDOWS 7 64 Bit Installation Error

     
    Getting an following error when trying to deploy WIN7 on Dell3010 model at the final stage.
    File: /windows/system32/drivers/iastora.sys
    Status – 0XC0000359
    Info: Windows fail to load because a critical system driver missing or corrupt.
    Can anybody help with this.

    Since you're dealing with a Dell, go here to make sure you have the right drivers:
    http://en.community.dell.com/techcenter/enterprise-client/w/wiki/2065.dell-driver-cab-files-for-enterprise-client-os-deployment.aspx
    I would also suggest using this model of driver management (scenario 3) so the wrong drivers aren't applied:
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
    If this post is helpful please vote it as Helpful or click Mark for answer.

  • Itune\quicktime installation error invalid G drive on Windows

    Hi,
    I am trying to install Itunes 9 on a Thinkpad T61. When it gets to the quicktime phase, it says invalid G drive. I have tried going to the cmd prompt and performing Subst G: C:\, but after doing so it goes a little further, then says "the specified path is too long G:\lib". My only option is to cancel out. I have tried starting in my dock with external drive plugged in and thumb drive too to avoid having to use the SUBST command. When I do it this way, I get a different error, 2869.
    I have tried just installing quicktime separately, but does not work either. I etiher get Error 2869 or that the G drive does not have enough space? I have a different laptop (older T41) that it worked just fine. Why not just use that one? The USB ports will not operate at 2.0! (known but separate problem). Sorry for the long question, but could not find anyother similar post!

    Doublechecking Jim. Have you tried the procedure I describe in the following post? (In your case you'd be looking to change the drive letter to G rather than F.)
    http://discussions.apple.com/thread.jspa?messageID=10820461&#10820461

  • ITunes 9 installation error "Error getting file security"

    Every time I try to install iTunes 9, I get this error:
    Error getting file security: C:\ProgramData\Apple Computer\Installer Cache\QuickTime 7.62.14.0\GetLastError: 5
    Any ideas? I'm running Windows Vista 64-bit. Any help would be greatly appreciated.

    itunes installs quicktime. The trouble is with the security settings in the folder in C:\ProgramData\Apple Computer\Installer Cache.
    On both the Apple Computer folder and the Installer Cache, you will need to take ownership. Then delete the quicktime folder.
    First, to see the folder, in explorer go to Organize, folder options, then view tab. There click the radio button see hidden files and unclick hide protected system files.
    Then navigate over to the folder location above.
    Right click on the folders, click on properties, then security.
    There at the bottom, click on advanced. Then click on the owner tab. There you can change the owner to the user that you logged on as.
    That should fix it. Remember to delete the quicktime folder after to take ownership.

Maybe you are looking for