Windows 7 iTunes error 7

I have got a windows 7 64bit laptop, and i have been experiancing problems with my iTunes. It worked last saturday (28th April) and ever since then i can't open it back up. it asked me to re-install it as it wasnt installed properly.
The error that is coming up is "Error 7 (Windows error 999).
I have tried un-installing iTunes and re-installing it but it still keeps
on coming up with the same error. I have tried this serveral times now and still getting the same message.
I have put the settings on the recommended settings and still nothing has
happened.
What have I done wrong? Is there anything I need to do?
Kathryn

Refer to this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074

Similar Messages

  • Windows 7 itunes error msvcr80.dll missing - how can I repair or fix to open itunes

    I have uninstalled and installed itunes a number of times and I continue to get the same error message - making it impossible to open itunes on my Windows 7 pc.  I have run out of my bag of tricks.  How can I once again get itunes to run and work to access songs and connect my apple devices?

    This also 100% work
    Removing and reinstalling iTunes and other software components
    If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (see note 1 below)
    iCloud (if present)
    MobileMe (if present) (see note 2 below)
    Bonjour
    Apple Application Support
    Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iPod
    C:\Program Files\iTunes
    also on 64-bit systems:
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple
    C:\Program Files (x86)\iPod
    C:\Program Files (x86)\iTunes
    Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
    If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • I can't re install iTunes on Windows Vista- itunes error 7/Windows error 5.

    I have updated my computer with Service Pack 1 & 2 for Windows Vista.  For some reason Itunes was deleted and when I try to reinstall it I get a message "iTunes was not installed correctly. Error 7, Windows error 5"  I have done the following to try and remedy this problem:
    1.  Delete all Apple software (to start over and reinstall) - I cannot delete Apple Application Support (Access Denied)
    2.  Repair itunes - Same message
    3.  Logged on as Administrator and tried to take ownership of the file that denied permission - Access Denied
    4.  Tried to install MS .NET Framework 3.5 & 4.0:  3.5 was succesful but 4.0 was not - something went wrong in the installation.
    Please help!

    Hi there Zombie_Driver,
    You may find the troubleshooting steps in the article below helpful.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W. 

  • Windows and itunes error message

    I get an error message each time I install itunes. "itunes has encountered a problem and needs to close." I can't get itunes to open. I have tried to uninstall and reinstall with no success. I even tried system restore. How can I resolve this?

    itunes is installed and works fine until I close the program for a short time. When I try to open itunes at a later time I get the original error message. The only way I can get itunes to run again is to uninstall and reinstall again, only to repeat the same results. How can I get itunes to install and run without any problems?
    Sallygirl

  • Windows XP, Itunes error on startup, NEED HELP!!!

    Whenever i click on iTunes i get this error...
    [img]http://img301.imageshack.us/img301/2160/itunesyi3.th.jpg[/img]
    i cant even open itunes....
    I tried reinstalling, and restarting and the works.... if anyone can help i would be AWESOMELY thankfull!!!!

    i can't see the message properly in the image. is it giving you a 0x666D743F, by any chance?

  • Error during OS 4.2 update; Ipod no longer recognized by windows or itunes;

    I've had my 3G 8gb since last Feb and never updated the OS (3.1.3). Yesterday I tried updating to 4.2. (OS: Windows Vista 64bit Home Premium; iTunes: 10.1.1.4) There was an error (unfortunately did not make a note of). Now my ipod touch is stuck in "Recovery Mode" and cannot be seen by Windows or iTunes. Windows does detect new hardware but when I browse for the drivers, I get the error "Could not find driver software" after I pointed exactly where it was located in C:\Program Files\Common Files\Apple\Mobile Device Support and C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. I've tried removing all Apple software from my computer and then reinstalling iTunes but I get the same results. I don't know what else to try. Any ideas? Thanks!

    I found a solution last night through http://support.apple.com/kb/ts1538. But thank you for trying. The worst part was that I was doing the right thing all along but I think there is a bug in Vista (or I don't understand why I couldn't do it the way I was). On the window that appears after I clicked "Browse my computer for driver software", there are 2 options. The first says "Browse for driver software on your computer" which has an edit box under it and a "Browse" button next to the edit box which allows you to pick the parent directory that driver is in. The second option says "Let me pick from a list of device drivers on my computer". I knew where the drivers were so I was doing option one and it would not work (many repeated attempts after re-installing iTunes, etc.) - VERY FRUSTRATING. But now I'm up and running!!!

  • TS1363 I'm trying to update to newest software, but during proccess, an error accured, now the iphone 4s wont do anything, it only shows plug into itunes. when i do, the device is not recognized by windows or itunes. any ideas?

    im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

    ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
    MESSAGE, READS  a network error occured while attempting to read from the file  C:WINDOWS\installer\iTunes.msi

    All sorted now just needed to repair itunes from control panel

  • ITunes error 7 (windows 127) VideoToolbox.dll

    I have uninstalled, reinstalled, tried installing the videotoolbox.dll file seperately, and looked up just about everything i can find but nothing matches my exact problem or fixes it. When I try to open itunes i get 2 error messages. The first reads:
    "The procedure entry point kVTCompressionPropertyKey_ThrottleForBackground could not be located in the dynamic link library VideoToolbox.dll"
    After I click ok I get another pop up saying:
    "iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)"
    Can anyone help me fix this?
    Thank you
    P.S. I am running Windows 7 64-bit

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • Windows XP: iTunes will not open - no error message

    Hi,
    I have a fresh install of Windows XP with no other programs installed but Firefox, a graphics driver, and a wireless adapter driver - all on C:. This computer was built for surfing the net and managing an iPod... that's pretty much it. Anyway, I have reinstalled several times both Windows and iTunes and every single time I can install successfully, the event log confirms that it installed successfully, and then when I go to open iTunes, nothing happens. Not even an error message. The hourglass starts and then it disappears and... nothing. Its as if I never opened it. The event log shows this int he application folder:
    The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
    I'm not sure this has anything to do with it because it doesn't indicate an error, just that an event occurred and it has no description for it.
    Please help me... TIA!

    After trying sto start iTunes, open the Task manger and look on the processes tab, do you see iTunes.exe running?
    If so you have a problem that is commonly due to an issue with cryptographic services.
    If you have just done a fresh install, was the smart card service installer, iTunes requires it.
    Here are my troubleshooting steps for silent launch failure with iTunes.exe running in the task manager:
    Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
    A couple of simple things to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    But usually it is due to a problem with cryptographic services.
    Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    Malware can interfere with cryptographic services and also pervert a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    You should be able to copy and paste the individual lines to save on typing.
    Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
    If there are no errors try starting iTunes.

  • Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

    Hello,
    I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
    I already:
    - Uninstalled all old Itunes versions.
    - Tried a clean reboot to install the new version,
    - Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
    But I still get the same error.
    Can someone help?
    Thanks!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
    tt2

  • I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    Hey socestlavie,
    Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

Maybe you are looking for

  • Messages.app not accepting my iCloud account

    HI, I've just upgraded my iMac to Yosemite (iMac (24-inch, Early 2009)) and I cannot log onto Messages using my iCloud account and gives the following error message. "Your Apple ID "<redacted>@mac.com" can't be used to set up iMessage at this time. I

  • Please Help in Joins and content tab (BMM Layer).

    Hi all, I am a newbie in OBIEE. I am working on a project in our organisation for existing database schema in oracle. We are planning to use OBIEE for reporting purpose. Here's my problem....... I have Three dimensions and Two Fact tables in my schem

  • Terms and Conditions to display in the last page of Script

    Hi Experts, My requirement is to print the Terms and Conditions in the Last Page of a PO. so for that, I have created one LAST page. Previously i have FIRST Page and Next Page in the Script. In the LAST Page it has to windows. One is for Logo and ano

  • Location of Ambient light sensor in I PAD

    Hello guys I am just wondering where is the exact location for Ambient light sensor in I- PAD. If it is possible with a photo i would be appreciated Thanks uae4ever

  • How to pouplute the sgtxt in MIRO using the customer modification ZXM08U29

    Hi, The SGTXT has to be populated from MIGO to MIRO using the user exist ZXM08U29. I have tried populated the field e_sgtxt in the user exits but the changes are not appearing. Any one already handled such senario please suggest. Thanks in advance, D