Windows 7 laptop does not recognize iphone 4 connection, does anyone have the same problem?
I recently bought my brother's iphone 4 from him and connected to my computer and downloaded some pictures. Now, however when i connect it says my phone is charging but my windows 7 laptop doesn't recognize my phone, can anyone help me please???
http://support.apple.com/kb/TS1538
Similar Messages
-
I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?
I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
I just updated my Iphone 4 for IOS5. The photo lybrary just duplicated after sync. Does anyone have the same problem?
Try this
https://discussions.apple.com/message/15135297#15135297 -
Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
iMac is connected via wirelss to printer/scanner. All was working OK until update.Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?
-
After reïnstalling Sygic Europe I don't get to download the map content.
Does anyone have the same problem?Hi, I have the problem too. Did you find a solution ?
-
Ever since I upgraded my iMac to the latest software I can't seem to burn any cd's does anyone have the same problem?
Care to share which latest software you installed?
-
Since I upgraded my iPad 3 to IOS6 my safari just quits unexpectedly. Does anyone have the same problem?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
updated with ios5 a few days ago and noticed that each day all my messages in Viber get wiped clean and have to start all over again
does anyone have this problem?
nuVery annoying! Having the same problem! After 'slide to power off' all is gone!
Anyone having a solution?
/r -
Using iMatch on iMac, iPhone and iPad. When I want to download all songs from a playlist on my iPhone, witch contains e.g. 143 Songs before the download, there are only 96 songs in the playlist after download. The missing songs are not listed anymore, but when I check the same playlist on my iPad (Not downloaded), it tells me, that it contains 143 songs.
Same behaviour with other playlists and even when downloading on iPad and checking on iPhone.
Does anyone has noticed the same behaviour?The track number issue is covered here:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=8...
Sounds like the bbthumbs.dat files that get created are causing problems. You can delete them all and it will work.
Doesn't look like a way to fix this permanetly however (they'll come back next time you sync) -
I just cant watch videos on YouTube or Facebook after updating to ios8.0.2. Can anybody tell how to fix that?
Differing sites use slightly different standards for videos, there are possibly other posts about this sort problem see for instance [https://support.mozilla.com/en-US/questions/790642 this one] . You may see a suitable answer in one of the other threads.
It is also worth noting Internet Explorer will use different FlashPlayer plugins, even though the version numbers may correspond with those used by Firefox.
See also [[Flash-based videos and sound do not play correctly]] -
Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...
Hello Wexxwoxx,
Welcome to the Apple Support Communities!
I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend.
First, I would suggest closing the Messages application completely by using the instructions in the attached article below.
Force an app to close in iOS - Apple Support
After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe -
My iPhone just dyed turn off and I can t turn it on again does anyone gad the same problem
My iPhone just dyed turn off and I can t turn it on again does anyone got the same problem
Hold the homebutton and the power button down at the same time for up to 40 sec. The phone should power back up
-
since update ios 7 my iphone 4 has been giving me trouble. sometimes will not respond to touch, is very slow when texting, and battery runs down very quickly when not in use and all apps are closed, has anyone had the same problem
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
KMS Error 0xC004F015 on Windows 2008 R2 - Does anyone have the correct fix for this please?
I am in the process of migrating my KMS server from Windows 2003 to Windows 2008 R2 64-bit. My Windows 2003 server has been happily providing my Windows 7 clients with licenses for well over a year. I have followed these migration steps in this forum article:
social.technet.microsoft.com/Forums/windows/en-US/cd4177bd-8df5-4a66-afdc-c760398b7e7f/migrating-kms-server-from-one-computer-to-another?forum=itprovistaactivation
I cannot get passed step 5. As soon as I try step 5 with my Windows 7 KMS key I receive error 0xC004F015. Despite reading countless articles on Microsoft forums and also speaking the Microsoft licensing who frankly were of no help at all, I am none the wiser
how to resolve this fault. My questions are:
1. Should my Windows 2008 R2 server be licensed with a MAK or KMS key? Does this matter?
2. Some articles I have read suggest if you use a Windows Server "C" license then you do not need to use a Windows 7 KMS key. I've tried this but it just tells me I have insufficient licenses.
3. When installing my windows 7 license key via the slmgr /ipk command should I be using my Windows 7 Professional KMS key? This works fine on my old Windows 2003 server, but Windows 2008 does not like it at all. Would I be better simply moving my KMS server
to a Windows 7 desktop instead?
4. I also want my Windows 2008 R2 to carry out my KMS activation for Office 2013. Can this run on the same server as my Windows 7 KMS key should I ever get it to work
Thank you anyone who can shed some light on this absolutely baffling error. Surely some one out there has the definitive answer.
Regards
N BuckI am in the process of migrating my KMS server from Windows 2003 to Windows 2008 R2 64-bit. My Windows 2003 server has been happily providing my Windows 7 clients with licenses for well over a year. I have followed these migration steps in this
forum article:
social.technet.microsoft.com/Forums/windows/en-US/cd4177bd-8df5-4a66-afdc-c760398b7e7f/migrating-kms-server-from-one-computer-to-another?forum=itprovistaactivation
I cannot get passed step 5. As soon as I try step 5 with my Windows 7 KMS key I receive error 0xC004F015. Despite reading countless articles on Microsoft forums and also speaking the Microsoft licensing who frankly were of no help at all, I am none the wiser
how to resolve this fault. My questions are:
1. Should my Windows 2008 R2 server be licensed with a MAK or KMS key? Does this matter?
2. Some articles I have read suggest if you use a Windows Server "C" license then you do not need to use a Windows 7 KMS key. I've tried this but it just tells me I have insufficient licenses.
3. When installing my windows 7 license key via the slmgr /ipk command should I be using my Windows 7 Professional KMS key? This works fine on my old Windows 2003 server, but Windows 2008 does not like it at all. Would I be better simply moving my KMS server
to a Windows 7 desktop instead?
4. I also want my Windows 2008 R2 to carry out my KMS activation for Office 2013. Can this run on the same server as my Windows 7 KMS key should I ever get it to work
Hi,
on your KMShost, if that is a WindowsServer OS, you cannot use a WindowsClient (WinVista/Win7/Win8/Win8.1) KMShost product key, you must use a WindowsServer KMShost product key.
Further, the KMShost product key must match the OS of the KMShost machine (or exceed/better it).
e.g. if your KMShost machine is WS2008R2, you must use a WS2008R2 (or higher e.g. WS2012 or WS2012R2) product key.
If you will use a higher product key, you will need to install the relevant patch package to do so.
When you install a Windows KMShost product key onto a machine, the Windows KMShost product key completely replaces the previous Windows product key of that machine [it serves two purposes, (1) replace the previous key, (2) activates the KMShost feature].
So, your KMShost is neither licensed as MAK nor KMS, it becomes a KMShost.
For WS2008R2 KMShosts, you can install one of 3 types (channels/groups) of KMshost pkey.
The channel/group pkey you choose, is based upon the maximum product editions you wish to perform KMSclient activations for.
http://technet.microsoft.com/en-us/library/ff793411.aspx
For your issue #2, are you attempting to install your Windows7 KMS key upon the KMShost or a KMSclient?
For your issue #3, are you attempting this upon a KMSclient? (Volume License editions on Win7Pro or Win7Ent, are already pre-loaded with a KMSclient pkey, so you should have no need to alter the client keys). As previously mentioned, no Win7 key is needed/possible
for the KMShost, if the KMShost is WS2008R2.
For your issue #4, yes, your WS2008R2 KMShost can also act as KMShost for Office2010 and/or Office2013, this requires a further patch, and the installation of the relevant Office KMShost pkey.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
How do I update my graphics card driver for ATI HD2600?
I have this new driver that I can update namely a new bios version and a display one which is version 8.432 for my hd2600 (8.383 now). But how exactly do I do this? Should I first uninstall my older ati driver or can i just install them over it?
-
ST05 LOBSTA what is this and how to interpret it.
Hi all, there is an object LOBSTA in sql trace called LOBSTA, which has quite big execution time and points to some Classes. Have you any idea how to interpret this object and what to do to improve execution times on it.
-
Hi there, after updating to the latest 5.0.1 software on iPhone 4, i ntice that i have to press the button like 10 times before responce!! This is extremely irritating! What can I do??
-
FPM_SEARCH_UIBB without result list ?
Hi SAP Guru's ! I want to use FPM_SEARCH_UIBB together with FPM_LIST_UIBB, because I think the new "Select-Options" are very cool. At the same time the customer want's to be able to export Result List to Excel and do column sorting. Up to now, I have
-
Using TomCat to view JSP files
I've installed tomcat for the purpose of viewing jsp files. In which folder am i supposed to place the jsp files to view them? Also, what address am i supposed to type in my browser ( http://localhost:8080/myJspFile.jsp ?????? ) My tomcat folder is e