Windows 7 - NcFsd under Mapped Drive

I am running Windows 7 with Novell Client 2 SP1 for Windows 7. I am having problems with a mapped network drive showing "NcFsd" under it and it not being accessible. If you double click on it, it says "The folder is empty." If I logoff of my computer and then log back in, it works until it happens again. Any suggestions?

Originally Posted by its-ph
I am running Windows 7 with Novell Client 2 SP1 for Windows 7. I am having problems with a mapped network drive showing "NcFsd" under it and it not being accessible. If you double click on it, it says "The folder is empty." If I logoff of my computer and then log back in, it works until it happens again. Any suggestions?
I have already tried this solution, but the registry settings were already there and correct. Thanks.

Similar Messages

  • Unable to remove Mapped drives GPO

    Hello
    Windows Server 2008 R2
    I previously create some mapped drives for users in 2 cities (same lan different ips - 10.10.2.x and 192.168.0.x)
    Under each ou I have gone into the GPO preferences and created a "Delete" under map drives.  When rebooting the workstations, the drives are still there and mapped.  I deleted the GPO for them and still, they show up.  I also created
    a new mapped drive and is sporatic to users (some users it does show up, others it does not show up).
    I cannot figure out why they are still being mapped or why only some users see the new mapped drive and some don't.  Even those users that see the new mapped drive still see the old ones as well.
    Any suggestions?
    Thank you
    Terry

    Hi Terry,
    There may be few things which you check
    1. Run RSOP or GPresult on users system and confirm if the old / new groups are getting applied.
    2. Make sure that group policy objects are replicated all domains Controllers in domain so that there is replication issue which is causing this behavior
    3. As suggestion if you need map drives for these users then don't need create new delete map drive. You can remove the original map drive settings or filter out these set of users using item level targeting.
    Hope this helps to resolve the issues.
    Regards,
    Rajesh J S

  • Mapped drives automatically disconnected

    Hi,
    Having a bit of an odd issue with a Windows 2012 R2 server mapping drives to a Windows 2008 R2 in a RDS environment.
    I have setup the mapped drives in GPO with the replace option and reconnected ticked.
    When I login with a user account, the drives all have the Red X, which causes us issues with applications trying to run from them, or utilize the drives, if you go and click on them in windows explorer they map fine.
    If I manually map a drive, log off and back on same red X.  Now if I do this as a domain admin, they drive seems to stay connected. 
    So I thought id add the users to local admin to test, no difference.  I have tried to disable all my GPO so nothing is getting applied to this server and same issue.
    have tried this command on the file server
    net config server /autodisconnect:-1
    Updated the registry with the as per:
    http://support.microsoft.com/kb/297684#appliesto
    have also tried the linkconnections regkey
    https://support.microsoft.com/kb/937624/en-us?wa=wsignin1.0
    now pretty much out of idea's may have to log it with MS, but thought id see if anyone has had a similar issue.
    Thanks,

    Hi,
    Would you please tell us that does this issue also happen on other servers?
    In addition, are there any related warning or error messages logged in the Event Logs?
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I can not map a network drive in window 8.1 under VPN

    Dear sir / madam,
    I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
    1. I success to map drive and then logout / switch user.
    2. wait two /three hours
    3. i find the drive  is disconnected.
    4. when I try to reconnect, window can not find again. then I try to use netstat
    C:\Windows\system32>netstat
      TCP    172.28.97.31:58206     test-server:http       TIME_WAIT
    Then, i try to use cmd , net use /delete and then try to reconnect  test-server
    5 it show reconnect successful by net use command. However , I need waste many time  and I can not find the drive in window.
    if I restart window, i can reconnect it quickly and find the drive in window.
    the server are window server 2008 r2 and server 2012, they located at difference site.
    if the server and PC located at same site, it is no problem.
    both the server and PC are joined in same domain.
    it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
    please help me to solve the problem
    (window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
    thanks

    Hi,
    How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
    According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
    a re-logon.
    example
    @echo off
    net use * /delete /yes
    net use x: \\server_name\shared_directory_name
    You can find detailed information in the following link
    https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
    http://technet.microsoft.com/en-us/library/bb490717.aspx
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • When logging on to Windows 7 user gets a second mapped drive to the users home folder

    Morning,
    I'm working through an issue we've discovered whilst trialing Windows 7.  Our environment is setup as follows.
    Domain Controllers are Windows Server 2003
    Clients are Windows XP and Windows 7
    Windows XP and Windows 7 Clients are in seperate OU's
    All Windows XP Group Policies apply to Windows XP And Windows 7 clients, Windows 7 policies are then applied to Windows 7 clients after
    Windows 7 policies are setup such that any setting defined in a Windows XP Group policy is left unconfigured in the Windows 7 Group policy and only new Windows 7 settings have been set in Windows 7 Group Policies.
    We have users home folders mapped in their Account Directory account setting and set to H:\   to connect to
    \\domainname\dfs\home\username
    In addition we also as a fail safe map the drive via a login script using net use
    This has worked fine for years in windows XP, if Active Directory failed to map the drive for any reason then the login script would then map the home drive.
    In Windows 7 we have noticed a curious error.  We found after a period of a couple of weeks we suddenly started getting a new drive mapped.  This was identical to the H:\ drive mapping but was instead under drive Z:\.  In other words, the
    users home folder is mapped twice on h:\ and z:\.  This is not affecting any of the Windows XP users.
    I have gone through several logic reasons to ascertain why this has happened with the following findings.
    1. Originally we thought the error appeared when we tried out mapping the home drive using the mapped drives functionality new in Windows 7 group policy under preferences > windows settings > drive maps.  However, after forcing it to delete the
    Z:\ drive using this functionality we only succeeded in removing it with a group policy present to do it.  As soon as we removed that group policy the Z:\ drive came back
    2. Secondly i thought the reason we would be getting a z:\ drive when we haven't specified it anywhere is because active directory is trying to map to the H:\ Drive but it is already present therefore in Windows 7 it tries to map to a different drive. 
    Using Windows logic it tries the highest letter first which is unlikely to be in use i.e. z:\.  This makes sense because our logon script uses a net use h:\ command to map the drive and i believe by default these are set to perisistent.  Therefore
    the next time the user logs on H:\ is already mapped so the logic in Active Directory accounts maps the drive to Z:\ instead hence we end up with two mapped home drives.  To test this i altered the login script to set the drive maps to
    non persistent using persistent:no.  The logic here was that when the user logged off the drive would become unmapped so that when Active Directory tried to map the drive it would be able to use H:\.  Unfortunately this was not the case and
    Z:\ remains.
    3. Here is where i resolve the issue but i don't know why and is the bit i need answering.  If i go into my account on Active Directory and go to Profile and set the home folder drive letter to another letter i.e. change from H:\ to U:\,
    i get prompted to set full control etc and apply.  I then set the drive back from U:\ to H:\, again i am prompted for setting full control which i accept.  
    NOW when i login i no longer receive a Z:\ drive and only get an H:\ drive.  YAY, thats what i want, however, i do not understand why this is the case.  At first i thought it might be something in the active directory logic when i login to an XP
    machine and then login to a windows 7 machine.  IF you bear in mind that although i get a new profile in Windows 7 i still retain the same home folder setting.  However, after logging on an XP machine logging off then logging
    on a Windows 7 machine i still didn't get the Z:\ drive back. 
    I have tried creating a new user that ONLY receives our Windows 7 Group Policies and still they receive both an H:\ and a Z:\ drive which rules out the Windows XP policies conflicting with the Windows 7 policies.
    Does anyone have any ideas why i would get a second drive mapped to Z:\ logging into Windows 7 on a Windows Server 2003 domain? 
    Can anyone explain in more detail exactly how the Active Directory functionality works when you specify a connect to Drive letter for a users home folder?
    My current workaround is simply to add a net use command to remove the Z:\ drive.  I do not want to use Mapped Network drives using the new policy settings in Windows 7 RSAT because we have already found issues with it. 
    <input id="3daf20bf-4f4d-4a05-86da-2c30c205d580_attachments" type="hidden" />

    We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
    We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
    dsquery and dsmod to modify this attribute in the user account. This is the command we used...
    dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
    Notice there is no ":" after the F
    We determined the root causewas the value for the
    homeDrive attributefor the user account was set to "F" instead of "F:"
    When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
    Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

  • Program running under UAC prompt hides mapped drives

    I have a user on Windows 7 with a non-admin account who runs a program that pops up the UAC. She clicks yes and the program runs. However, since the UAC was involved, it is running with a different token than what she logged into the computer with.
    This means that the program doesn't see her mapped drives when doing a File | Open. She has to navigate to the data folder on the server via Network. Needless to say this is cumbersome and inefficient.
    What can I do so that the program sees her mapped drives? I don't know of a way to get rid of the UAC except to turn off UAC which I do not want to do.
    Jonathan

    Hi Jonathan,
    I hope this might help you.
    Running Your App with Administrator Privileges
    There are times that you may need administrator privileges for an application. You may write code that directly interacts with a piece of hardware or an app that sets machine-wide settings in HKLM. When possible, you should design your apps to limit the
    need for admin privileges to narrow sections of code, or communicate to an application started with full administrator privileges. Aside from MSI-based elevation, there are two ways to create processes with a user's full administrator token. The Application
    Information Service (AIS) will check during process creation and during the creation of a COM object using the CoCreateAsAdmin moniker to see if the
    binaries require administrator privilege. It is important to note that the elevation occurs at the time of process creation. The process token never has privileges or group membership added during run time, only when it is
    created.
    More information:
    Teach Your Apps To Play Nicely With Windows Vista User Account Control
    http://msdn.microsoft.com/en-us/magazine/cc163486.aspx#S7
    Making Your Application UAC Aware
    http://www.codeproject.com/Articles/17968/Making-Your-Application-UAC-Aware
    Thanks.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Windows 7 64bit indexing network mapped drive

    Hi people,
    I've spent a lot of time with windows indexing on mapped drive. But without result. I've tried install hotfix, but nothing happens, Add-in works only for 32bit system, but I use 64bit. Using of symbolic link in library is without result too. I don't know,
    why MS released add-in only for 32bit. Could you help me, how to solve this problem?
    Thanks

    Hi,
    Have you tried the methods in following thread?
    How do I get windows 7 to Index a network mapped drive?
    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/afb904c1-1c61-4aae-b6b1-5cf525b9f8de
    Alex Zhao
    TechNet Community Support

  • Media shares auto mapping drive in Windows 8.1 Pro

    What setting in Windows 8.1 is causing the automatic mapping of several shared folders named media? 
    I work in a university environment with staff, faculty, and students using wired and wireless networks.  I have a user with a Surface Pro 3 that has started to automatically map, what seems like random addresses on the wireless network, to file shares
    named media.  When I setup these computers for the users I always have the media sharing turned off and I've never had cause to use it myself so I'm only a little familiar with what the settings do.  I've tried to change my own settings to reproduce
    the problem but I can't seem to find the correct setting so that I can reverse it.  Can someone point me in the right direction?
    Thanks,

    Hi Pete de Pistola,
    If your machine keeps reconnecting to a map drive, from driver path you should be able to track down which machine is shearing folder. Also since it is a Wifi network we wonder if users could use their own device which is not configured by administrator.
    As I know to prevent file sharing, group policy might be the only option.
    Enable or disable File Sharing with Group Policy
    https://technet.microsoft.com/en-us/library/cc754359(WS.10).aspx
    Regards

  • Software install in Windows 7 doesn't see mapped drives

    I've looked through the related topics that came up when I started to write this, but I am not sure they answer my questions fully.
    I am trying to install software on a Windows 7 box as the Administrator. My mapped drives are fine, I can see them and they are not dropping off to the middle of nowhere. What is happening though is that when I attempt to install software, the only thing
    that is showing is my local drives, not my networked drives. My work around so far is do it via UNC.
    Is there an easy fix for this or do I have to continue with my workaround of doing installs via UNC?

    Hi,
    I would like to confirm that does this issue occur on all the software you tried to install?
    You may try to
    disable User Account Control (UAC) to test the issue.
    If it does not work, I also would like to suggest you enable NetBIOS to test the issue.
    1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
    2. Right click on the connection that you use for the local connection, and then click "Properties".
    3. Click Continue button to verify the administrator permission.
    4. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
    5. Click "Advanced" button in the open window. On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
    If the issue persists, I also would like to suggest you disable the antivirus program and test the issue in
    Clean Boot.
    What is the result?
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I have one Windows 7 machine that can't map drive to Lion Share Point?

    I setup a Lion mac mini server.  Mac and Windows clients all can map a drive to the Lion share points with the exception of one Windows 7 machine.  When mapping I continually get "the specified network password is not correct" message regardless of which credentials I use.  I tried changing the win7 network settings and turning off the firewall but nothing has allowed a connection to happen yet.  Any help is appreciated !!!

    Also, when browsing the network and choosing the server in the list, I get a login prompt with the error at the bottom "Logon failure: unknown user name or bad password."  It's almost like it is trying to use some other credentials automatically?

  • 4.0EA3 : Unable to access mapped drives (Windows) in file browser dialogs

    All File Browser dialogs only allow access to by local C: (hard disk) and D: (DVD) drives. It is not possible any more to access mapped drives (which are referencing UNC paths to our file server) - i.e. Network drives.
    I have tried the following accesses to the File Browser:
    File -> Open    : Does not work
    File -> Data Modeler -> Open : does not work
    Tools -> Preferences -> Environment -> Log -> Log Directory -> Browse : does not work
    This worked/works fine in SqlDev 3.2.2
    I tried to rule out connection/authentication problems to our SAN (the network drives are fully accessible from Windows Explorer and even JDeveloper 11.1.2.2.0) - I created a drive mapping to a share on my local hard disk. Can't see this mapping from within SqlDev either
    Problem occurs on Win7 64-bit
    Looking forward to Oracle feedback or to see if other users find the same issue
    Alan

    https://drive.google.com/file/d/0B2daepPy6k7nbGl4d2xobFJFVTg/edit?usp=sharing
    Hi Jeff
    Many thanks for your reply.
    No - the location drop-down only shows my C: (Hard Drive) and D: (DVD Drive).
    With further playing, I did find that if I qualify a script on a network file share with the full UNC path, it successfully opens the script.
    The problem is that I cannot navigate to locations on mapped drives.
    Having successfully opened a sample script, there is now a shortcut to the folder/directory of my shared scripts in the left pane of the open (file browser) dialog box. Its a good workaround.
    I have shared a screenshot on my Google Drive (this forum does not allow insert of images or attachments ?)
    Alan

  • Windows 7 network issues accessing shared/mapped drives.

    I have three Thinkpads running on my home wireless network.  Two are running XP.  One - a new W520 is on Windows 7-64.  I have no issues with the XP machines.  The Win7 machine is having problems with the wireless network connection.  It's not that I lose the network - the status is connected with a good signal.  The problem is when retrieving or saving files from my server (running XP with shared/mapped drives) I get errors reading and writing files.  Just opening the shared drive in My Computer on occasion displays nothing, as if it knows the drive is there, but can't read it.  Sometimes it displays the folders but then will take an extremely long time if I try to open a folder.  Another issue is if I try to print, the job rarely completely sends to the printer.  If I plug in directly to the printer via USB, the file prints.   
    This has to be an issue with Windows 7 and something in the wireless setup, doesn't it?
    I've searched for solutions all over the network.  It seems this is a common Win7 problem with no well defined solution.  I've had the issue since the very first day, but today, I'm just about ready to backrev to XP after losing 2 hours of work on a Photoshop file!
    To date (over the last month) this is what I've done:
    Disabled the IP6 stack.
    Turned off power management to shutdown the wireless card.
    Updated to the latest Intel drivers for the Ultimate-N 6300 AGN adapter (direct from Intel.) 
    Today, I ran this, netsh interface tcp set global rss=disabled but still have the network drive issue plus am having issues browsing web pages.  It's getting worse instead of better.
    Anyone familiar with this issue on a Thinkpad with known solutions or recommendations?
    Thank you!

    Hi
    Thanks for Your Post
    You may need to Disable UAC On Windows 7 . Please refer Below Link for more Details
    http://support.microsoft.com/kb/937624
    Hope This Helps
    Cheers!!!

  • DFS and Windows 7 x64 strange behavior when trying to access a DFS link through mapped drive

    I've manually mapped a network drive (Q Drive) to a DFS location. Whenever I go into "My Computer" and open the Q Drive it shows the DFS links but when I double click one of the links it randomly takes me back to the "My Computer" starting point showing my standard drive letters. If I click through the Q drive and the DFS several time it all of the sudden works. Sometimes this circle of clicking can go on for 5-10 times before it works properly.
    I'm running the x64 edition of Windows 7.  Any suggestions on how to make this work properly? Its very annoying.

    GPO mapped namespace where you can't connect through the mapped drive letter but can connect through the DFS UNC namespace? Do you use access based enumeration?
    I personally think it has something to do with network bandwidth, the security token and offline files. =)
    You can access the namespace itself but not any of the linked shares (try checking the ACL:s on the shares and you get permission denied, but you still see them, ie they are listed).
    I found a post sometime ago about corrupted/trunkated security tokens. If the member was part of too many AD groups the token was trunkated and corrupted. That was going to be my next move. Sniff the traffic and see what actually happens when the issue occur
    if theres something to be learnt there. Since it works correctly through the UNC adress but not through the drive letter you ough to be able to see what is different between the two requests.
    http://blogs.technet.com/b/askds/archive/2008/05/14/troubleshooting-kerberos-authentication-problems-name-resolution-issues.aspx
    One thing I noted was that it only happened to remotely connected computers on slow 3G connections (we use Direct Access). Never on LAN-connected computers with GB access or remote computers with fast (>15Mbps) access. We also use folder redirection,
    which I think could be part of the problem, ie the share never goes online, atleast for us the issue was itermittent, it never happend all of the time, just from time to time. And if I disconnected and reconnected it could fix the issue for that particular
    sessions, usually it didn't but occasionally it did (just pulling the network cable and put it back). Check the offline/online status the folders show up as offline even though they are online.
    Enough of my ramblings. Sorry to hear you still have the problem and I hope you find a way to solve it.

  • Mapped drive duplicating in windows 8.1

    I upgraded to Windows 8.1 a little while ago and have run Windows Update recently.  For the most part, things seem to be working fine. 
    One issue that I have noticed is that one of my mapped drives keeps duplicating.  This seems to happen after every restart, or shutdown.
    I have Hyper-V set up and I mapped drive T:\ to a folder on that drive.  It has been working fine for a year.
    After getting the latest update for Windows 8.1, when I go into File Explorer, I will see that drive listed as all other available drive letters as well as drive T:\.
    I can disconnect them, but it is a pain to have to do that over and over - I cannot map other drive letters to other folders if they are in use.  I need to do that periodically for testing client issues.
    I have searched the forums and did not find any open threads for this.
    It is a standalone workstation that is networked with other computers but it is not on a domain.  This is the only other computer I use all the time that has Windows 8.1 installed.
    Please help.

    Hi,
    You can try clean boot to determine if a 3rd party software causes this issue.
    If this is not the cause, I suggest you modify the registry value of mapped drivers to see if this issue persists:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Map Network Drive MRU then delete the duplicated drive path.
    If this issue persists, please try another user account for test.
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support
    No 3rd party software is causing the issue.
    I went to
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Map Network Drive and there is only the default, nothing else.
    There are no other user accounts on this machine.
    mjmart61

  • Mapped Drive B:\ to a network share but does not show up in Windows Explorer.

    I mapped drive B: to a network share but it does not show up in Windows explorer.  I can go to the drive by typing b:\ but is not visible in explorer.  But if I login as local admin it shows up in windows explorer.  Any suggestions?

    Hi Lloyd Reeves,
    Based on my research, I would like to suggest the following:
    Disconnect the mapped drive and map it again.
    Ensure the user is using an administrator account; or change another user account to have a try.
    Create  a shortcut for a share folder and see if it will disappear.
    In addition,  it would be helpful for future troubleshooting if you could help to collect the following information:
    Which method did you use to map drive?
    Was there any error message in the Event log? If so, please provide the      detailed information.
    For your information, please refer to this similar case:
    http://social.technet.microsoft.com/Forums/windows/en-US/6acab187-c46c-4ff9-8604-196c64ea8995/mapped-drives-not-visible-in-explorer-although-shown-in-map-network-drive?forum=w7itpronetworking
    Regards,
    Lany Zhang

Maybe you are looking for

  • Query Designer Crashing

    Hello, I have just upgraded my Query designer to Support Package 7, Patch 1 Revision 571.  This is a BI Addon 7.x (based on 7.10).  Ever since this upgrade I've had issues with restricting infoproviders.  Everytime I try to restrict an infoprovider,

  • CVS Versioning unable to connect in SQL Developer 2.1

    I just upgraded to SQL developer 2.1 from 1.5. I did the check for updates and the CVS Versioning that gets installed is version 11.1.1.2.36.49.42 For some reason this version will not let me connect through ssh to CVS. I double checked the connectio

  • Database Refresh

    Hi, I have two databases on two different servers which are not physically connected. One database is having Oracle 9i version 9.0.1 on HP-UX and the other is having Oracle 8i version 8.1.6 also on HP-UX. The two databases are used by two different d

  • 360 degree image to linear format

    Hi, I am trying to convert a 360 degree (Cylindrical) 2d image into a linear 2d strip of image as a part of my masters project. Could any one please tell me a better idea of using java functions to work on image conversions? Cheers, Anand

  • 10.4.3 hangs on fast user switching or logout

    Hello! Since installing Tiger, it often occurs that fast user switching or logout hangs. The system is responsive, but it is impossible to switch to a different user. If I kill that user's loginwindow process from a terminal, everything is o.k. again