WINDOWS 7-NEED HP COLORLASERJET 2840 SERIES PCL6 DRIVER-LOT OF $$$ IN 2840

My 2840 worked with XP but won't print in windows 7. I tried all the HP fixs and the driver in windows 7 to no avail. Any help?

Hello,
I also do not find a scanner driver for my laserprinter. Also Fax function is not available, could anybody from hp please let us know when we can expect this support?
Regards
Martina

Similar Messages

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Have Windows XP and Adobe 9 Reader and need to send a series of large documents to clients as a matter of urgency When I convert 10 pages a MS-Word file to Pdf this results in file of 6.7 MB which can't be emailed. Do I combine them and then copy

I have Windows XP and Adobe 9 Reader and need to send a series of large documents to clients as a matter of urgency When I convert 10 pages a MS-Word file to Pdf this results in file of 6.7 MB which can't be emailed. Do I combine them and then copy to JPEG 2000 or do I have to save each page separately which is very time consuming Please advise me how to reduce the size and send 10 pages plus quickly by Adobe without the huge hassles I am enduring

What kind of software do you use for the conversion to pdf? Adobe Reader can't create pdf files.

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

PhotoSmart A646 & Windows 8 "Need to download the Driver"

I am attempting to install the drivers for my Photosmart A646 on my new laptop that has Windows 8.1 installed. When I try to install the software I get a pop-up that says I need to go get the driver and install it. I click on the Get Driver button and I get directed to HP.com. I select the Windows 8.1 64-bit driver and am able to download the driver. When I double click the file I just downloaded, I get the same pop-up stating that I need to go get the driver. I repeat the process and am directed to the same location. I get stuck in a loop and can't get the printer drivers loaded, so I can't use the printer.

I have been successful installing my HP photosmart A646 on my new Asus laptop with Windows 8.1 and an Intel i7 processor!
In order for my technique to work, you will have to locate your printer driver file folder on your previous machine’s hard drive and transfer the folder with the enclosed files to your new machine using a thumb drive or by mounting your old hard drive as an external drive.
There appear to be two issues to overcome when trying to load the new drivers. First, the website download is broken and it locks you in a loop. This is overcome by using the old drivers already installed on your previous windows vista or windows 7 machine. Second, the drivers from the previous machine fail the windows 8.1 driver signing process, so they need to be installed manually using an advanced startup mode trick. Lastly, once all is set up, whenever you plug in and turn on your machine, it appears to windows 8.1 initially as an external drive. If you eject the drive, your printer will act as a printer.
If you have already attempted to install the printer, it may be showing up on your Devices and printer screen as a device. REMOVE IT before you begin this process. Your printer should not be connected to your computer as you begin this process. Also, consider printing these instructions as your computer will restart during this procedure.
You will need to perform an advanced restart of your new Windows 8.1 machine in order to disable driver signature enforcement. This will allow you to use the windows Vista/7 drivers. This procedure is detailed in http://www.fotoclubinc.com/blog/how-to-disable-driver-signature-enforcement-to-allow-installation-of... . I take no credit for it; all I did was find it! This advanced restart is a one time only event, and makes no permanent change to your machine.
Begin the procedure by opening the charms bar (right hand bar that appears when you swipe a touch screen from the right or click on the right upper or lower corner.)
Select the spyglass search icon and type in ‘advanced startup’. Select the ‘change advanced startup options’ icon that appears.
In the Update and recovery screen that appears, choose the ‘restart now’ option under the Advanced startup heading.
The next screen will say ‘Choose an option.’ Select the ‘Troubleshoot’ icon.
At the Troubleshoot screen, select the ‘Advanced options’ icon.
At the Advanced options screen, select the ‘Startup settings’ icon.
At the Startup settings screen, select the ‘Restart’ button.
Your machine will restart at this time. You should see the blue ‘Startup settings’ screen. Press either F7 or 7 to select the ‘Disable driver signature enforcement’ option. If you wait too long, the machine will shut off, and you will need to restart at #3 above.
Sign on as you normally would.
Use the charms bar search icon to search for ‘control panel.’ Choose the control panel icon to navigate to it.
Select ‘View devices and Printers’ under the Hardware and sound section heading if you use the category view for control panel. Alternatively, select the ‘Devices and Printers’ icon if you use the traditional icon view for the control panel.
Choose the ‘Add a printer’ option at the top of the Devices and Printers screen. It is directly below the address ribbon at the top of the window.
A pop up appears as the machine attempts to find your printer. Select ‘The printer that I want isn’t listed’ in the lower part of the pop up box.
In the Find a printer by other options box that appears, select ‘Add a local printer or network printer with manual settings’ radio button.
In the Choose a printer port box, select the ‘Use an existing port’ radio button and choose ‘USB001 (virtual printer port for USB)’; press ‘Next.’
The Install printer driver box now appears. Your thumb drive with your printer information folder needs to be plugged in before proceeding further. Once it is mounted and recognized, select ‘Have Disk’ at the bottom of the box, then press ‘Next.’
At the next box, select ‘Browse’ and navigate to the printer information folder on your thumb drive. The file locator should help you select ‘hpvq03.inf’ from your Hpvqc03.inf_amd64_xxxxxxxxxxxxxxxx folder. Then press the ‘Open button.’ You will be returned to the previous screen. Press the ‘OK’ button to continue. Now press ‘Next.’
At the ‘Which version of the driver do you want to use?’ screen, select the ‘Replace the current driver’ radio button, then press ‘Next.’
At the next screen, you can leave the printer name as listed, or change it, if you prefer.
At the Printer sharing screen, I chose the “Do not share this printer’ radio button.
The next screen should say ‘You’ve successfully added HP Photosmart A640 series 2.’ Plug your printer into USB port and to power and turn it on.
When you power up your printer, it will likely present itself to your computer as if it is an external drive. If it does, it is important that you use the file explorer (reach this by navigating to the PC desktop and choosing ‘This PC’ or by using the charm search function and typing ‘file explorer’) to right click on the external drives and eject them. Once you have ejected the thumb drive and the printer (that your machine recognized as an external drive), you should be able to use the printer in a normal fashion.
I can’t promise this will work for you, but it did for me. Best of luck.

Windows 7 and Macbook Pro 17" (Series 4,1)

I am entirely unsatisfied with the Windows 7 support that the Bootcamp 3.0 drivers supplied with Mac OSX 10.6 give.
This refers to the commercial, licensed version of Windows 7 Ultimate with Mac OSX 10.6 Bootcamp drivers installed.
While I find the Windows 7 Ultimate experience on my Macbook Pro to be in general quite pleasant, it has some significant problems.
1. Suspend / Resume does not work. When closing the lid, the OS continues running, sometimes - which leads to dangerously excessive heat build up as the fans appear to stop.
2. When leaving the laptop lid open and the laptop unused for a period of time - the machine will simply go black. I suppose its suspended, but the only way to bring the machine out of this state is to fully power cycle the machine, leading to a Microsoft message that Windows shutdown improperly. Repeating this over a number of times leads eventually to Windows requiring a chkdsk at bootup - something takes almost 3 hours to complete on my 50gb BOOTCAMP partition.
3. Temperature control is appalling. The laptop in general runs dangerously hot when booted into windows 7, I have even burnt my thigh as a result.
4. My Apple Bluetooth Wireless keyboard works inconsistently and the pairing is nearly impossible to set up, requiring a bizarre process of switching bluetooth drivers.
5. Why is the Airport basestation + bonjour an obscure download on Apple.com and not detected as needed and available in the Bootcamp driver set? Or available via Apple software update? Surely the software would know its connected wirelessley to an Apple basestation??
As an Applecare customer and licensed user of both Microsoft and Apple software, really this situation is appalling. Apple should provide a working driver set that makes the laptop fully supported NOW. Windows 7 is out as a commercial product and enterprises are already adopting it.
If anybody knows a way of solving any of these problems in Windows 7, please do let me know. And Apple - fix your drivers so they resolve these problems before your laptops start blowing up through overheating.
Message was edited by: thetravellor

lol, not even one reply?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

My windows system needs to be reinstalled. How will this affect my itunes and iphones?

My windows 7 needs to be reinstalled. I have a large itunes library and i have two iphones, an ipod, and a shuffle. What do I need to do to keep from have files lost and other proplems with the phones if I have to fix windows. I have experienced many many problems with itunes when I have had to move it from one computer to another. Sometimes it loses half of my files and when I connect my Iphone it would rewrite it's memory. I do not want to go through this again. I do not want this to happen to my iphones. Can anyone help?
TamTaman

Include your iTunes library with your computer's backup per the instructions included with this link.
http://support.apple.com/kb/HT1751

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac. That would be Mac OS Extended (Journaled).
PCs can also read and write to the Mac formatted drive.

Pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help

pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help. Am trying to work on document from office computer at home on laptop.
This is what the pop up says:
You need a newer version of Numbers to open this spreadsheet.
You can download the latest version of Numbers from the Mac App Store.
Thanks,

WS,
At first, it can be difficult to determine which version of Numbers you are using. The user interfaces are different, but if you are new to the apps you may think you are using the new version when if fact you have launched the older version. Make sure you are using Version 3.x. Then you won't get the message that you need a newer version.
Use Spotlight to launch Numbers. After typing Numbers into the search field, pick the result that says "Numbers -- Applications".
Jerry

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

If the text is still on the phone and wasn't deleted, I don't see why not. Probably easiest to use an app like TouchCopy (Mac and PC) or PhoneView (Mac), rather than looking through things on the phone itself.

I purchased Photoshop Elements for windows and need it on mac

I purchased Photoshop Elements for Windows and need it for Mac. Can I reverse this or is there a way to get the right product?

I don't know if things have changed (I get the feeling they have as of late), but normally an Elements license can be applied to either platform, so you should be able to download the trial version for the Mac and use the serial number to activate it. If you have any problem you should be able to resolve it with customer spport thru chat.

Does Mac have a tool similar to snippy or snagit? Do not use Windows. Need to copy data off archived online newspapers.

Does Mac have a tool similar to snippy or snagit?
I do not have Windows.
Need to copy data off archived online newspapers. Unable to do so with screenprint, etc.
Heard windows has a tool called Snippy, looked at Snagit, but read free download agreement and it reads a bit 'fishy', as the download is only free for 30 days, etc and it talks about fees etc.

Mac does have two utilities: Snagit for Mac and LittleSnapper. There are a few others. Snag it for mac is just a better "clippings" thing. It will not scan your image. There are OCR products available for Mac which might be able to take your clipping document and scan it back to text.
Snagit Mac is here: http://www.techsmith.com/snagit-mac-features.html
To see OCR stuff do a google search for: Mac OCR Software
And you'll get quite a few.

Window constructor needs another Window obj then how the Frame obj created

hi all
Window constructor needs another window obj as owner
then when we create the Frame obj, surely the Window constructor gets called
so where from this window get the owner of it self
thanx

Window, Frame, and Dialog all have native implementations (obviously), so the simple answer is "it just does"
More formally, since a frame is a first-class window (ie shows up in the windows taskbar) it is not dependant on another frame.

WINDOWS 7-NEED HP COLORLASERJET 2840 SERIES PCL6 DRIVER-LOT OF $$$ IN 2840

Similar Messages

Maybe you are looking for