Windows 7 Network Drivers No Longer Works

Bought a MBP a week ago, just installed Windows 7 on its own partition, installed bootcamp, everything worked fine for the first day. The next day, it did not recognize my network drivers (wireless, ethernet). Control Panel states that they are not installed correctly with an exclamation mark. I've tried installing the drivers from Windows, it 'could no find file'. I've tried reinstalling the drivers using MBP BC CD, after its finished, it reboots, and windows tries to install the remaining drivers. A windows popup keeps stating that 'driver was not installed correctly' and the BC CD does not resolve the issue. I've tried uninstalling the drivers and then manually installing as well as rebooting and allowing windows to reinstall the drivers. Nothing has worked.
So that leaves me with this conclusion, the drivers are now missing from the Windows partition as they can not be found and the drivers on the MBP BC CD will not install successfully for some strange reason. It kind of makes it hard to do anything at this point.
Before this happened, I did encounter a BSOD, but did not give me much information on why (there was a hex error code though). It's a bit frustrating not being able to install the drivers from disk, even manually. Not sure why it won't install successfully, shouldn't be a hardware issue since it works fine on OS X 10.6.
Any thoughts, help or opinions would be much appreciated.

Here are things I tried....which I accumulated from multiple forums....and, unfortunately none worked for me, but might work for you:
http://discussions.apple.com/message.jspa?messageID=11518129#11518129
What did work for me: deleting the driver. reinstalling it. rebooting my router about 5-7 times, and they finally connected.
probably just dumb luck.

Similar Messages

Network inspector no longer working.

Applies To: Microsoft Edge F12 Developer Tools
Release: Windows 10 Insider Preview SDK and tools, April 2015 release
Issue:
Network inspector no longer working.

Restart the “Internet Explorer ETW Collector Service” service via Computer Management. To do that:
From Start search and open the “View Local Services”
Locate the service named “Internet Explorer ETW Collector Service”
Right click -> Restart

After upgrading to Windows 8.1 iCloud no longer works on my PC

After upgrading to Windows 8.1 iCloud no longer works on my PC

I have the same problem - my data had better not be gone! Why won't Apple address this problem?

HP OfficeJet 8620 Scan to Network Folder No Longer Works after Mac OS X 10.10Yosemite Upgrade

My scan to network folder function no longer works. When I look into it, I get an error message when I test the Network Folder setup saying, "Incorrect credentials. Check your username/password and try again."
The username and password are unchanged. I just bought this AIO and I kinda need this function to work. I hope that 10.10 didn't just disable this function.

I have followed your recomendation step by step but did not work. The message "Incorrect credentials. Check your username/password and try again." keeps showing once I test the credentials.
After several hours of work this is very upsetting. What other option are to set up using Mac Book Pro and Yosemithe?
Thanks
LN

Network shortcuts no longer work

hello all -
i have a client with 15 mac workstations, an Xserve and a G4 server. we have a folder that everyone has on their machines with server shortcuts. so the first time we use a new server share, i connect the manual way (finding it in the browser etc) then i make an alias and add it to this folder of server aliases.
in Tiger these no longer work, it says the alias no longer works, do i want to delete it or fix it?? i can of course connect to the server the slow way, but i want to get these shortcuts to work, because it makes everyone's work go a lot faster
i've tried recreating them in Tiger but no go, and i recreated them in our lone OS 9 machine and that doesn't work either. the ones we already have on our desktops is from Panther and they don't work
we only have 4 users running Tiger 10.4.3, and the servers are both running OS X Panther 10.3.9
thanks
bob

yes i have tried recreating them in Tiger and they don't work reliably. they work as often as the Panther-created shortcuts work - once in a while.
at the least everyone is learning how to navigate the network, but there are only so many users that can do this without losing their minds.....

Lenovo U350 - Windows 7 - Network (LAN, WiFi) not working

Hi
My WiFi is not working on my new computer Lenovo U350. I have pressed FN+F5, but it says I have to turn on the switch. Where is this switch??
I've tried to reinstall the network drivers as well...

Look on the left side of the laptop, in front of the USB port. There is a slide switch there.
Page 4 of the users manual shows a picture. Look here: http://consumerdl.lenovo.com.cn/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/U350/Lenovo%2...
Bill

Windows messenger 8.01 no longer works following recent mountain lion update

Windows messenger v8.01 no longer lets you sign in since a recent mountain lion update. Anyone have a fix, an alternative or a thorught? I did try uninstalling and reinstalling as well as looking for updates or threads on this.

Hi there.
Sorry about my late reply but my issue was solved unexpectedly... I plugged in again the headphones and I forgot to plug them out for 20-30 min... Then when I unplugged them the problem was solved!!!! Therefor I didn't have the chance to try your solution but I'll keep it in mind for next time.
(However I was also experiencing some other issues as well after the upgrade so I erased everything and installed from scratch. Hope it never happens again.)

Windows file sharing can no longer work after tiger upgrade

hi guys, ive been searching the web to find a cure on my problem for a long time now, but still no success, hope someone could help me out.
ok heres my problem, before the upgrade, file sharing with windows is perfect, with no problems at all, but when i upgraded one of our mac to tiger, windows file sharing is not working anymore, i cant connect or see my windows xp computer on the network and vice versa, windows cannot see my mac with tiger on the network.
Our other 2 macs here running in panther are fine( meaning, windows file sharing is working)
Now we've bought a new computer which is a mac pro with fresh install of leopard, i setup the windows file sharing, but i was surprised that i cant see my windows xp box too on the network, and vice versa, the pc cant see my mac pro too on the network, whats wrong with tiger and leopard file sharing???? please help me, im so frustrated cant make it to work. i know, my pc computer has nothing to do with it, coz i can still connect to a mac with panther os. hope someone can help me fix this... please..

This site has some information on file sharing and printer sharing between Windows and Macs for various combinations of OSs. The Leopard repository isn't quite as mature as the Tiger repository, but there's a lot of good information at this site. Hopefully, it will be helpful to you in resolving your Windows/Mac issues.

Came home yesterday to find my time capsule has an orange light blinking and my wifi network is no longer working. Not sure how/why this happened and can't get it working. Do i just reset it and will this lose my backups? Or can I create a new wifi n/w?

Its an 802.11n (4th Gen) model
I looked at the diagnostics screen (next to the blinking orange icon on the Airport Utility and it says there are four issues:
the software (currently V 7.6.1) has an update available. If I click update I get the error message "There was an error connecting to the update server. Check your network settings and try again". However, nothing's been changed settings-wise
The other 3 status issues are:
Internet Connection - but the router is working fine and I can connect to the router via wifi on my MacBook Pro
No DNS Servers - I have no idea what this means
Ethernet Unplugged - it's not and I also replaced the ethernet cable which has no effect
Do I just cut my losses and hit the reset button - if so will I need to back everything up again (i.e. I will no longer be able to access my backups) or do I just set up a new wifi network - again, will this impact on my backups?
Any help/advice would be appreciated - thanks

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Panasonic network cameras no longer work with new versions of Firefox.

I have been viewing my Panasonic Network camera, model BB-HCM381A using Firefox for several years.
Starting with Firefox version 15.0.1 and again with 16.0.1, 16.0.2 and 17.0.1 the browser begins to display the streaming video, but then drops the signal after maybe 20 seconds. Refreshing the page brings back the image for another 20 seconds, and then drops it again.
All previous versions of Firefox before version 15.0.1 worked great. Now I have to use Internet Explorer exclusively. It would be great if you could fix the problem.
Example of viewing the streaming video can be found at www.bandon.tv, which may require installing a plug-in from Panasonic.

I see the same happen, but it takes longer. It is possible that the server gets too many visitors and drops some of them. A right click and "This Frame > Reload This Frame" also works. I also notice that frames get blocked (it skips seconds), so you may need a faster server.

Windows NTFS network drive no longer able to edit files in Osx 10.9

In the OSX 10.8x and before, the network drive hosted by Windows 2008 server in our .local domain was able to be modified by my imac under a local user account with the same user name without any problem. The only issue was not able to join the AD due to the existing .local domain setup. Upon upgrading to OSX 10.9 today, the network drive still connect properly, and the files on the share drive is still able to be opened, read, copied and deleted as before. However, any attempt to save the changes to the opened file display an error message saying that it is been locked and I have no privilege to modify the file. The funny thing is now that the mac computer is able to join the windows AD without problem, although under the network account, the same problem exited. Something has to do with the SMB right/ share has been changed in this release. Anyhelp on how I may resolve this problem?

I'm hoping you or someone can solve this. We're using Tuxera to add SMB NTFS write capabilities to Mavericks and it works great for everything ... except for iWork 2013. iWork 09 still reads and writes perfectly, as does every other app I have on my Mac.
At this point, I fear using iWork 2013 in a mixed Windows/OSX environment is dead if your server is NTFS. It's another quiver in Microsoft's argument that iWork is for children only. Despite all the griping about deprecated functions in the new iWork, there's no show stoppers as far as I'm concerned, and I use Pages, Keynote and Numbers in serious ways daily.

My wireless network is no longer working

I had a wireless network created through my iMac. I unstalled a secuirty update as prompted by the computer and now the airport/network preferences are not locating the network. help please!

My AirPort Express units (2nd gen) no longer extend my wireless network after working the last 12 months. Connection is average to good. I've reset the units, but this did not resolve the issue.
We need a bit more information in order to begin to troubleshoot this issue.
What is the model number of your "main" Apple AirPort router?
If you are not sure, look on the bottom of the device to locate the model number starting with an "A" followed by 4 numbers.
Next, we need to know what operating system you are using on your Mac or PC....or.....whether you are using an iPhone or iPad to configure the AirPort Express devices.
If you have a Mac, and want to check on the current operating system, click the Apple icon in the upper left corner of the screen, then click About This Mac and post back with the OS X Version number that you see there.

Windows 10 Upgrade, Touchpad no longer works on laptop

I upgraded my HP Mini 110 from Windows 7 Starter to Winows 10. It runs fairly smooth but my BIGGEST complaint is that my touchpad no longer responds to taps and scrolling. I used it for just about everything and now I have to use the Left or Right buttons to navigate. FRUSTRATING!!Are there any updates, drivers, patches or Mr FixIt for this? Thanks! -Armando

How did you manage to upgrade to Win 10? I am told graphics will not support it. When I try and update graphics driver I get a failure saying a sub key is not found! Did you have problems with graphics compatability? Regards

Just installed OS 10.4.8, and network is no longer working

I just installed the OS 10.4.8 update and I can no longer connect to our ethernet network at work. If I perform network diagnostics I get green lights on "built-in ethernet", "network settings" and "ISP" but internet and server fail. When I run the network utility I have data coming in but nothing will go out. In addition, my airport works fine at home.
I've looked through some of the other discussions but no one else seems to have this problem!

Hi-cfholmes,
When you say connect to your network at work, do you mean when your mac is plugged in to the ethernet there at the office, or connecting across the internet (remote login)?
Have you checked with your office network admin-person to see if there are any proxy settings you need to be aware of?
You say no one else has this problem. It's possible that there others who state their problem differently.
Have you restarted your mac since the upgrade? (besides the reboot that mac makes you do during the upgrade)

Ati drivers no longer work after upgrade

I was trying to mount a vfat partition the other day, to copy files from a friends USB drive. It would not mount no matter what I did. I had found out that for some reason, the last kernel that I updated to did not have the proper character set enabled in it before it was compiled. I noticed there was a new kernel, and decided what the heck, and gave it the old pacman -Syu
I rebooted after this only to find my x server now crashes. So I did some research and it seems that there is a lot of complaints about this new xorg 1.5. So I thought about downgrading, but decided against it. I did a hwd -x, and copied over the xorg.conf.vesa, and restarted X. It worked. I then tried with the ati driver and it doesnt work.
So I am using x, with the vesa driver. And I can view videos (these were the files I wanted to copy from my friends USB drive. Although I can now mount it, and have copied them fine.)
Here is some output
[shawn@lungbox ~]$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
[shawn@lungbox ~]$ pacman -Q xf86-video-ati
xf86-video-ati 6.9.0-5
[shawn@lungbox ~]$ cat /etc/X11/xorg.conf.ati
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
BTW, when the xserver fails, I select yes to see the output, and it skips the output and tells me to re-enable x when I have configured it properly. So I cant seem to get you that information.
Side note: I can also not upgrade gnome-terminal. I get this error:
[root@lungbox shawn]# pacman -S gnome-terminal
resolving dependencies...
looking for inter-conflicts...
Targets (1): gnome-terminal-2.24.2-1
Total Download Size: 0.00 MB
Total Installed Size: 9.58 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
gnome-terminal: /usr/share/gnome-terminal/encodings-dialog.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/keybinding-editor.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-manager.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-new-dialog.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-preferences.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/skey-challenge.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/terminal.xml exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-default.png exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-tabbed.png exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/gnome-terminal.xml exists in filesystem
gnome-terminal: /usr/share/locale/kn/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/mai/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/ps/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/sr@latin/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/omf/gnome-terminal/gnome-terminal-cs.omf exists in filesystem
Errors occurred, no packages were upgraded.
I am not impressed by the update problems I have been having recently. I've been using arch for a while now, and everything has gone smooth exept for the last 2 months, I have had about 5 seperate issues. Not sure if im the only one feeling this. Might be my set up who knows.

The xorg.conf.ati was renamed to xorg.conf. I had named it back when it didnt work. And renamed xorg.conf.vesa to xorg.conf to have a usable x session.
Here is my output for Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux lungbox 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 26 22:52:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0x40000000/0, 0x41000000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mach64"
(WW) Warning, couldn't open module mach64
(II) UnloadModule: "mach64"
(EE) Failed to load module "mach64" (module does not exist, 0)
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(EE) No drivers available.
Fatal server error:
no screens found
I have tried to remove the xorg.conf and retry the x server. It opens but I have no keyboard or mouse control and the resolution is incredibly small (640.480?). I can not log in, or change to any tty because of a lack of keyboard, and I am stuck rebooting my computer, which results in a fsck and all that good stuff.
As for the gnome-terminal problem, I managed t get around it by removing the package, updating my system, and reinstalling gnome-terminal. I wanted to try that since there were new ATI drivers waiting to be installed. But the new ATI drivers do not seem to do me justice. :S
And sorry for not getting back right away. I was just using the VESA drivers to get me by. I had a lot of work to do before the holidays. And now im back on it.

Windows 7 Network Drivers No Longer Works

Similar Messages

Maybe you are looking for