Windows 7 no load

iTunes doesn't load on Windows 7 - - it "rolls back" any hints?

Similar Messages

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

Windows 7 install hangs at "Windows is loading files ..." on MBA

I have been trying to install Windows 7 Ultimate but each time the install hangs at "Windows is loading files ..." on reboot. I am using a Windows install DVD using an external drive. When the install hangs, the DVD is not being accessed. I have tried several times and it leads to the same result. I have tried different partition sizes (20 GB - 50 GB), no luck.
Any help would be greatly appreciated.

Solution
I have a macmini bought in mid2011 with OS Lion on it. AS it doesnot come with an optical drive, I bought an LG DVD drive and used the windows 7 (64bit) installation DVD. It stopped at windows is loading files....
I tired couple of other options like using flash dirve but it dint work.
The I went to Apple's Genius Bar, and they put the installation dvd into their dvd drive (by Apple). Then the windows installed perfectly fine.
When asked they said it must be the problem of DVD and I found out that it actually is the cause. Apple products require dual layer optical drives but in general the optical drives we buy can only read single layer dvds. So I got to fix the problem by borrowing their dvd drive in genius bar and now i m good to go.....
Hope this helps

How to create a popup window to load HTML page in AIR application without using any mx or spark?

How to create a popup window to load HTML page in AIR application without using any mx or spark components?
I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

Can we achieve this? can somebody help me on this scenario..

App store doesn't work (freezes, "Main window NIB load started 2min"...)

My log:
-------------------------------------------------------- Begin --
System Version 10.9.2 (Build 13C64) "App Store" Version 1.3 (201.4)
Mar 23 21:13:44 Lap App Store[98261]: FRStoreViewController: Using process-per-webview model for identifier primary
Mar 23 21:14:14 Lap App Store[98261]: CKClientDispatch: Timeout occurred invoking selector storeFrontID on class StoreClientController with object (null) (four times)
Mar 23 21:15:44 Lap App Store[98261]: APAppDelegate: Main window NIB load started 120.2284(two minutes???) seconds after launch
Mar 23 21:15:45 Lap App Store[98261]: FRStoreViewController: Store state changed to splash (loading)
Mar 23 21:16:15 Lap App Store[98261]: CKClientDispatch: Timeout occurred invoking selector isValidWithInfo: on class BagController with object {
bagType = 1;
Mar 23 21:16:45 Lap.local App Store[98261]: CKClientDispatch: Timeout occurred invoking selector primaryAccount on class AccountStore with object (null)
I tried to delete the temporary files directory and the caches, change the permissions, run AppStore application with root previlegies, delete preferences, reboot system, etc. Some problem
Ther're 2 user in system. This problem only with my account. Under other user - all is fine.
I do not want to reinstall the system or work under other account.

Hi, thanks again.
I reinstalled Lion (using Recovery), but the problem remains. Even worse, Apple Software Update didn't work any more. As soon as I selected something for installation (e.g. iTunes), the progress bar would show but then it used to freeze forever (internet connection was fine). I tried several times after reboot.
The I tried a hard shutdown (holding the power key pressed), and after that, the app store was working (very slowly) and i could also install the software updates.
However, after a normal reboot, the app store didn't work any more.
I repeated this twice with the same result: the app store works after a hard shutdown, but not after a normal shutdown+reboot.
Any suggestions?

My cq56 wont start it keeps saying windows is loading files but wont start

my compaq presario CQ56 wont sart. it just keeps telling me "windows is loading files" but just wont start

Is the message that the printer is offline?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
If not then check the USB cable between the computer and printer and reseat it if necessary.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

MDT 2012 + WinPE 4.0 + VMWare ESXi - Hangs "Windows is loading files" booting into PE

I'm trying out using MDT 2012 and WinPE 4.0, upgrading things. I've recreated things following templates in MDT 2012. I'm also using ADK and WinPE 4.0.
Issue I'm seeing is upon restarting into WinPE I see the screen showing Windows is Loading Files and the progress bar. I see the first one load through and then the second slower one load through. Once progress bar fills, it just does nothing and I'm left
looking at a complete progress bar.
I was trying obviously first using VMWare ESX 5.0 with no success, subsequently tried a couple of physical machines and those had no problems. I still want to get working on ESX since that will help speed up development and testing of the rest of the stuff
I need to upgrade. Tried a variety of SCSI controllers within ESX vms. I tried VMWare Workstation 9 with the mixed results as with the LSI Logic Parallel SCSI controller had success but not the others.
I of course at first tried making sure drivers were added with no change, although that still could be an issue with drivers I found to put in being incorrect.
More interestingly though is that I can of course install Windows 8 from install media just fine on these hardware, as well as if I create an ISO from the deployment share and boot to that it works just fine, so it seems to just be an issue when booting
to WinPE on disk.
Any ideas are greatly appreciated. Thanks.

I did have the same problem with ESXI 4.1 and Windows 8.
I found a full solution with the following:
download the linked file at the bottom of this post and add the following options to your vmware-configuration
file:
bios440.filename =
"<full path to rom image>" --> if file in folder of vm only "bios.440.rom
mce.enable = TRUE
cpuid.hypervisor.v0 =
FALSE
vmGenCounter.enable =
FALSE
This worked for me for several environment with an older ESXI-invironment and Windows 8.
http://communities.vmware.com/servlet/JiveServlet/download/2139717-98102/bios.440.rom
I can confirm that this works also! Many thanks!
ESXi 4.1 with WinPE4.0

Windows Server 2012 R2 - ADFS/Windows Network Load Balancing Converging Issue

Hello,
My name is Brandon. We have started upgrading our servers to Windows Server 2012 R2. We have some powerful servers for running ESXI 5.5 as the OS with the Guest Operating Systems as Windows Server 2012 R2. As far of our migrations/upgrades we have configured
ADFS 2012 R2 into a Server Farm with Windows Network Load Balancing to add redundancy in the event a server goes down.
I have been having issues with a Node with the Cluster getting stuck in the Status of Converging. The only way I have been able to get it back up is to restart the virtual server completely and it is temporary. When I first configure the Cluster the two
virtual servers get added to the Node with no problems and fully converge. However, after some time a node will end up in Converging and this takes Authentication for ADFS down as the nodes can not be contacted over Port 443.
Error: Host: server.domain.com Unable to connect to "server name"
System
Provider
[ Name]
Microsoft-Windows-NLB
[ Guid]
{F22AF71F-C4C3-425D-9653-B2F47B85DD30}
EventID
21
I have tried using 1 & 2 Virtual NICs on the machines and still end up with communication issues. Could someone assist me with why I am having this issue? This is not an issue with a firewall. If it was a firewall it would never communicate the first
time. Has anyone had experience with a similar configuration and how were you able to make it work?
Below is my configuration.
Static ARP Entry for Cluster IP Address has been added to our Layer 3 switch.
Physical Server 1:
ESXI 5.5 HOST
1 NIC CONNECTED (shared with virtual guest)
IP ADDRESS: 192.168.0.5
SUBNET: 255.255.255.0
DGW: 192.168.0.1
Virtual Server 1 (Guest OS)
Physical Server 2:
ESXI 5.5 HOST
1 NIC CONNECTED (shared with virtual guest)
IP ADDRESS: 192.168.0.6
SUBNET: 255.255.255.0
DGW: 192.168.0.1
Virtual Server 2 (Guest OS)
Virtual Servers
Virtual Server 1
MS SERVER 2012 R2 (VIRTUAL)
NLB NODE 2
VIRTUAL NETWORK ADAPTERS
VNIC1 IP ADDRESS 192.168.0.10
SUBNET: 255.255.255.0
DGW: 192.168.0.1
VNIC 2 (NLB)
IP ADDRESS: 192.168.0.11
SUBNET: 255.255.255.0
Virtual Server 2
MS SERVER 2012 R2 (VIRTUAL)
NLB NODE 2
VIRTUAL NETWORK ADAPTERS
VNIC1
IP ADDRESS 192.168.0.20
SUBNET: 255.255.255.0
DGW: 192.168.0.1
VNIC 2 (NLB)
IP ADDRESS: 192.168.0.21
SUBNET: 255.255.255.0
Cluster Configuration/Properties
CLUSTER PROPERTIES CLUSTER IP: 192.168.0.30
CLUSTER SUBNET: 255.255.255.0
FULL INTERNET NAME: FS.DOMAIN.COM
CLUSTER OPERATION MODE: MULTICAST
PORT RULES:
CLUSTER IP ADDRESS
START
END
PROTOCAL
MODE
PRIORITY
LOAD
AFFINITY
ALL
80
80
BOTH
MULTIPLE
EQUAL
NONE
ALL
443
443
BOTH
MULTIPLE
EQUAL
NONE
CLUSTER NODES:
1.) SERVER1.DOMAIN.COM
a. IP: 192.168.0.11
2.) SERVER2.DOMAIN.COM
a. IP: 192.168.0.21

Hi,
According to your description, my understanding is that：2 ESXI 5.5 physical devices (192.168.0.5 and 192.168.0.6), each of them has a virtual WS 2012 R2(192.168.0.10 and 192.168.0.20). Cluster the 2 virtual servers successfully, but they corrupt with event
ID 21, and a restart of virtual device will resolve this problem temporarily.
Event ID 21 means that NLB failed to converge due to inconsistencies in the port rules between this host and cluster host. This will occur if the number of port rules or the type of port rules are different between hosts.
Ensure that all NLB hosts have identical port rules. Detailed steps you may reference:
Event ID 21 — NLB Port Rules Configuration
https://technet.microsoft.com/en-us/library/dd364034%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Windows Server 2012 R2 - Windows Network Load Balancing Converging Issue

Hello,
My name is Brandon. We have started upgrading our servers to Windows Server 2012 R2. We have some powerful servers for running ESXI 5.5 as the OS with the Guest Operating Systems as Windows Server 2012 R2. As far of our migrations/upgrades we have configured
ADFS 2012 R2 into a Server Farm with Windows Network Load Balancing to add redundancy in the event a server goes down.
I have been having issues with a Node with the Cluster getting stuck in the Status of Converging. The only way I have been able to get it back up is to restart the virtual server completely and it is temporary. When I first configure the Cluster the two
virtual servers get added to the Node with no problems and fully converge. However, after some time a node will end up in Converging and this takes Authentication for ADFS down as the nodes can not be contacted over Port 443.
Error: Host: server.domain.com Unable to connect to "server name"
System
Provider
Name]
Microsoft-Windows-NLB
Guid]
{F22AF71F-C4C3-425D-9653-B2F47B85DD30}
EventID
21
I have tried using 1 & 2 Virtual NICs on the machines and still receive this error even if only 1 VNIC is assigned to the virtual machine. Could someone assist me with why I am having this issue? Has anyone had experience with a similar configuration
and how were you able to make it work?
Below is my configuration.
Static ARP Entry for Cluster IP Address has been added to our Layer 3 switch.
Physical Server 1:
ESXI 5.5 HOST
1 NIC CONNECTED (shared with virtual guest)
IP ADDRESS: 192.168.0.5
SUBNET: 255.255.255.0
DGW: 192.168.0.1
Virtual Server 1
Physical Server 2:
ESXI 5.5 HOST
1 NIC CONNECTED (shared with virtual guest)
IP ADDRESS: 192.168.0.6
SUBNET: 255.255.255.0
DGW: 192.168.0.1
Virtual Server 2
Virtual Servers
Virtual Server 1
MS SERVER 2012 R2 (VIRTUAL)
NLB NODE
2 – VIRTUAL NETWORK ADAPTERS
VNIC1
IP ADDRESS 192.168.0.10
SUBNET: 255.255.255.0
DGW: 192.168.0.1
VNIC 2 (NLB)
IP ADDRESS: 192.168.0.11
SUBNET: 255.255.255.0
Virtual Server 2
MS SERVER 2012 R2 (VIRTUAL)
NLB NODE
2 – VIRTUAL NETWORK ADAPTERS
VNIC1
IP ADDRESS 192.168.0.20
SUBNET: 255.255.255.0
DGW: 192.168.0.1
VNIC 2 (NLB)
IP ADDRESS: 192.168.0.21
SUBNET: 255.255.255.0
Cluster Configuration/Properties
CLUSTER PROPERTIES
CLUSTER IP: 192.168.0.30
CLUSTER SUBNET: 255.255.255.0
FULL INTERNET NAME: FS.DOMAIN.COM
CLUSTER OPERATION MODE: MULTICAST
PORT RULES:
CLUSTER IP ADDRESS  START END PROTOCAL MODE   PRIORITY LOAD  AFFINITY
ALL    80 80 BOTH  MULTIPLE  ..  EQUAL  NONE
ALL    443 443 BOTH  MULTIPLE  ..  EQUAL  NONE
CLUSTER NODES:
1.) SERVER1.DOMAIN.COM
a. IP: 192.168.0.11
2.) SERVER2.DOMAIN.COM
a. IP: 192.168.0.21

Thank you for your response. It took me a while to figure it out, but the whole issue was related to the type of Virtual Network Adapter I was selecting.
I changed the network adapter from E1000 to VMXNET 3 and have not had a single error in the event logs or Windows NLB.
I read somewhere that VMXNET 3 is preferred for Windows Server 2012 R2.
https://communities.vmware.com/thread/433792
Leyuka       May 23, 2013 6:14 AM
"Just a help for everyone with this problem :
After 10 days of research for our virtual datacenter behind a vcloud as iias , i found a solution .
I only run windows 2012 server .
Install vmware tools , remove e1000 network card after a vm stop, add a card same vswitch etc BUT with a vmxnet3 TYPE . DONT USE DEFAULT CARD
Start and enjoy this solution . E1000 and E1000e are just unstable in windows8 / windows 2012 , the network card reset randomly with or without heavy IO. No log in windows , and as a vcloud user i don"t have esxi logs (damn i don't like cloud) and provider
don"t know why ..."

Windows Network Load Balancing - Virtual MAC Address

Hi All,
I have environment that running 2 Exchange 2010 server with CASHT and join windows network load balancing as a node.
My question is,
If NLB service is restart, is it virtual MAC Address for NLB will change to new virtual MAC Address?
Thanks for response,
Best Regards,
Henry Stefanus

Hi Henry Stefanus,
The NLB work mechanism will not change whether what higher application we used and I am not very familiar with Exchange NLB architecture, may the following KB and article
may help you.
When you use the unicast method, all cluster hosts share an identical unicast MAC address. Network Load Balancing overwrites the original MAC address of the cluster adapter
with the unicast MAC address that is assigned to all the cluster hosts.
When you use the multicast method, each cluster host retains the original MAC address of the adapter. In addition to the original MAC address of the adapter, the adapter is
assigned a multicast MAC address, which is shared by all cluster hosts. The incoming client requests are sent to all cluster hosts by using the multicast MAC address.
Selecting the Unicast or Multicast Method of Distributing Incoming Requests
http://technet.microsoft.com/en-us/library/cc782694(v=ws.10).aspx
The related third party article:
Building NLB Exchange 2010 RTM CAS / HT Servers (Hyper-V) – Part 1
http://blog.morecoffeeany1.com/2010/03/19/building-nlb-exchange-2010-rtm-cas-ht-servers-hyper-v-%E2%80%93-part-1/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Host Unreachable intermittently within a Windows Network Load Balancing Cluster

Hi,
We have 2 Windows 2008 R2 servers running multiple IIS web sites and load balanced across Windows Network Load Balancer in unicast mode. Although there are two interfaces in each server, only 1 interface in each server participates in load balancing and
other interface is used for a different backup LAN. The problem I am going to mention was not seen within the NLB for almost 1 year.
I have noticed intermittent "host unreachable" detected from NLB in each host from time to time since 3 weeks ago. After servers are rebooted, both hosts can be reached and can be detected from NLB manager. However it becomes unreachable in both
servers within minutes and then becomes reachable again after several minutes. This behavior is noticed in the load balancer and pings do not work between the two hosts when the issue occurs. I did a packet capture to see what was going on with ARP message
when the issue occurs. ARP entry goes missing in each server when the problem occurs and no ARP replies are returned from each server. But ARP requests are dispatched from both servers when the issue occurs. ARP replies come back after sometime after which
hosts become reachable again.
I tried to create a permanent static ARP entry (By copying the MAC address from ARP table when the two hosts are reachable) in each host but that hasn't solved the issue either. It seems like the individual MAC address generated by each host is a virtual
one and it doesn't seem to respond when the problem occurs.
However load balancing and web sites are fully functional without any issues even while "host unreachability" issue is detected.
Appreciate if someone could help me to dig the real problem out.
Thank you.

Hi,
Did you do some change of your network or the NLB firewall settings recently?
If you are using the NLB cluster in Hyper-V guest vm you need to enable the spoofing of MAC address.
The related article:
Cannot access the virtual or dedicated IP address of an NLB node (Guest) running in Unicast Mode on Windows Server 2008 R2 Hyper-V
http://blogs.technet.com/b/networking/archive/2010/02/12/cannot-access-the-virtual-or-dedicated-ip-address-of-an-nlb-node-guest-running-in-unicast-mode-on-windows-server-2008-r2-hyper-v.aspx
More information:
Selecting the Unicast or Multicast Method of Distributing Incoming Requests
http://technet.microsoft.com/en-us/library/cc782694(v=ws.10).aspx
Single network adapter
http://technet.microsoft.com/en-us/library/cc776178(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pop up windows are loading to the right (off the page)

I have a 27" new iMac. In Safari when I open some pictures or pop up window they load far to the right cutting 1/2 of the window, off the screen. Does anyone have any ideas? Thanks

Quit Safari if it's open.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
~ (Tilde) character represents the Home folder.
For LIon: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

When booting 7 64bit on HP Pavilion, I get a window saying loading "Trayapp.msi" .

When booting 7 64bit on HP Pavilion, I get a window saying loading "Trayapp.msi" It asks for a CD containing such. What can I do I have no CD? This new Desktop has Windows loaded from the Internet.

This means part of the hp printer software was not deleted properly. (Windows detected something is missing and tried to repair the installation). You should be able to find it in the downloaded hp printer software. If not, try download and install the hp printer software.
Use the uninstaller to remove installed software/driver, to avoid issues like this.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Adding a Windows Boot Loader, stored in a BCD Store, to another BCD Store

Hi
How do I add a Windows Boot
Loader, stored in a BCD
Store, to another BCD Store?
Thanks
Bye
Balubeto

Hi,
To add an new entry to BCD Store, please refer to the contents of the link below for more details:
Boot Configuration Data Editor Frequently Asked Questions:
https://technet.microsoft.com/en-us/library/cc721886(v=ws.10).aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

Windows 7 no load

Similar Messages

Maybe you are looking for