Windows 7 No Longer Recognizes The .zfsendtotarget File Extension

My Windows 7 no longer recognizes the .zfsendtotarget file extension as of a few days ago. I don't know what happened or how to fix it other than possibly going back to an earlier point, which I cannot do due to all the progress, which will be lost.
Besides, there must be a more intelligent course of action.

Hi DJjarak,
I just write to check your issue's status. Did it resolve?
Karen Hu
TechNet Community Support

Similar Messages

  • I'm running Windows 7 and my Pavillion dv6500 no longer recognizes the CD/DVR drive. Help?

    I installed Windows 7 and my Pavillion dv6500 no longer recognizes the CD/DVR drive.
    It's not even in the device list!

    Hi:
    What is the specific dv6500 model you have?  If you don't know, please look for the product code which is on the same sticker as the serial number and post it.
    It is possible your notebook may need the chipset driver installed.
    Paul

  • File name in msdb.dbo.backupset no longer matches the actual file name on the storage media. Error 3013 Restore Database is terminating abnormally.

    Thanks in advance for taking the time to read this and comment. Platform: Windows Server 2008 R2 Enterprise Edition SP1 (X64) Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation
     Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)Problem Description: The file name recorded in the msdb.dbo.backupset (sans the extension) no longer matches the actual file name written to the backup media which is
    in this case a NETAPP NAS storage share. Example:
    Mohave_backup_2014_03_14_233001_1158878.bak      (from NETAPP NAS filer)
    Mohave_backup_2014_03_16_233001_4167237             (from MSDB.dbo.backupset), as you can see, the last 7 digits (chars) of the file name are different, although the date and time are identical. The
    file names had previously been matching perfectly. The first occurance of this problem occured on 03/13/2014 at 5:00 AM MST. The error generated by the job was:
    Date  3/14/2014 10:29:23 AM
    Log  Job History (Refresh - Restore Mohave_93_DEV AD HOC)
    Step ID  1
    Server  OurDevServer
    Job Name  Refresh - Restore Mohave_93_DEV AD HOC
    Step Name  Restore Mohave_93_DEV
    Duration  00:00:01
    Sql Severity  0
    Sql Message ID  50000
    Operator Emailed  
    Operator Net sent  
    Operator Paged  
    Retries Attempted  0
    Message
    Executed as user: OurDomain\OurNetworkServiceLogin. Restore Mohave Prod to Mohave_93_DEV - ERROR: 3013 RESTORE DATABASE is terminating abnormally. [SQLSTATE 01000] (Message 50000).  The step succeeded.

    Olaf:
    Thanks for your reply. Sorry, my bad. I inadvertently copied wrong [name] form the msdb.dbo.backupset. On 3/13 and 3/14, the two file names did not match. In trying to select another example to show you this morning, I found that the names are now matching!
    What I was doing was to create dynamic t-sql to retrieve the latest prod backup of the database, and then restore it with move to the development server. This is an ad-hoc job that the developers can run by themselves whenever they require a refresh. Unfortunately,
    we only keep 3 days worth of backups for these databases, so the original disk file I was trying to use to restore no longer exists. Researching the original error, one of the error descriptions was that the restore could not find the file requested.
    I thought this very strange since I get the file name directly from the backupset table. Further research did indeed show that the file names were different, but unfortunately, I failed to save the details of the file names. Anyway, in looking for a new example
    to show you this morning, I have found that the file names are indeed matching exactly again. If this error pops up again, I will be sure to save all details and re-post.
    Thanks, regards and best wishes to you and yours, 

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

  • Lightroom is no longer showing the .dng files

    Lightroom is no longer showing the .dng files, everything else(Exif data and histogram), but no viewable picture. It did ask me for my serial number today, which I typed in. After that I went to import new RAW files, and the files themselves imported, but will not show the picture. None of my .dng files will show the picture now.

    It seems that the ACR cache is either corrupt or the whole plugin might have got some corruption.
    You can go ahead and delete the Lightroom x Catalog Previews.lrdata by following the location from the link below accrding to the OS. (x denotes version)
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html.
    After relaunch if it still doesnt show the images try uninstall and reinstall of Lightroom by removing it from Programs & features if on Win 7 or from Add & Remove in Windows XP.
    If you are on mac just take the Lightroom complete file and trash it & directly install the most recent update of Lightroom.
    Mandhir

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

    Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
    Please some one help on this

    You need to try exporting the first half of the book.
    If that exports ok then export the other half of the book.
    Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
    For example if your book is 128 pages long:
    1. Export pages 1 - 63
    2. If these Fail to Export then
    3. try exporting1-32
    4. If these Fail to Export
    5. then try exporting1-16
    If it doesn't fail (step 2)
    Then export pages 64-128
    and 64-90 etc.
    until you find the pages causing the issues.

  • What is the best file extension for import?

    When converting a DVD to another file extension for FCP, what is the best file extension to use? When I was using Adobe products, I would convert the DVD with Stream Clip to an AVI or MPEG and bring it right in. I found these do not work well in FCP. I know I can play it in and make a capture, I was just trying to find what file extension I should use to bring it right into the browser. I receive some DVD's that are quite long and would rather convert them to another extension instead of playing it in to capture.

    In MPEG Streamclip, use the export settings that match your FCP Sequence settings. Typically that would be QuickTime DV/DVCPro (NOT .DV Stream).
    Here's a 2 part tutorial on MPEG Streamclip by Nick Holmes:
    http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
    -DH

  • My 2008 pavillion dv9910us notebook no longer recognizes the optical reader

    My 2008 pavillion dv9910us notebook no longer recognizes the optical reader (cd drive)  any ideas how to fix it since I can't put in restore cd to fix it?

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now listed and working.
    If it still iit's still missing, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it is now listed and working.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Or If there is any purchased music then you can try to transfer purchases
    http://support.apple.com/kb/ht1848
    If you're in the US you can reload purchased music
    http://support.apple.com/kb/ht2519

  • Ever since I installed Safari 5.1 I can no longer access the pdf files on my website. I keep on getting an error with Webkit2webprocess.exe telling me that LogTransport2.dill was not found. Please help..

    Ever since I installed Safari 5.1 on my PC (XP) I can no longer access the pdf files on my website. I have no problems with Chrome and  Firefox. I keep on getting a message from WebKit2WebProcess.exe that the LogTransport2.dill was not found. (I HATE PCs...) I tried reinstalling Acrobat 9. I tried reinstalling Safari. I even tried an older version of Safari. Nothing Helped.  Others have tried it on their machine, and it worked fine. But I do not know what is the matter with mine. I suspect the root cause is the missing LogTransport2.dill file. But I do not know how to go about getting it.  Your help is truly appreciated. My website is http://www.hlmartworks.com.

    I have also found the article that provides 3 solutions but none of the solutions worked.

  • I just updated an iPhone 4 from iOS 7 to iOS 7.1 and my computer/iTunes no longer recognizes the device; what gives?

    I just updated an iPhone 4 from iOS 7 to iOS 7.1 and my computer/iTunes no longer recognizes the device; what gives? How do I get iTunes to show the device?

    With iOS 7, the "call Decline" button is only available when the phone is awake. To decline a call when the phone is asleep, simply tap the On/Off button.

  • I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
    The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
    Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

  • Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

    Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

    Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
    God bless. Thanks again.

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

Maybe you are looking for