Windows 7 not activating after deployment

I have 3 networks which are all deploying Windows 7. Two networks are using VMWare and the other one is using WDS. When the machines are deployed they state windows will try and activate in 3 days but it never does. I can get the machines to activate either
by pressing activate now or running a command prompt at administrator level and using the slmgr /ato command. Is there any way of automating this?

Hi,
Are we using KMS to activate Windows 7 here?
For configuring the KMS clients, please see:
Configuring KMS Clients
We may try to run slmgr.vbs /ckms to enable Auto-discovery the KMS hosts.
More information, please check the above article.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

My iphone 3gs is not active after update ios 6.1.2

my iphone 3gs is not active after update ios 6.1.2
plz ans. me....

You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
You can change the country and other things by:
iOS: Changing the signed-in iTunes Store Apple ID account

AM is not retained after deployed the custom pages

Hi,
I have two custom pages, Create(page1) and Select Jobs(page2) pages.
In Create page I've a button called Populate Jobs, Once I click the populate jobs button it will navigate to another page. In page2 I'll select list of jobs using multiple selection.
Once multiple jobs selected I'm validating those jobs(lines) already added to the page1 when click submit button (available in page2).
Both pages have same AM and I'm retaining AM when I move from page1 to page2. In page 2 if click submit button I try to get all the existing lines which is arendered in page 1.
But i'm getting zero count but records are there. It is working very fine in my machine before deployment. But the AM is not retained after deployed to apps.
Details:
OA Extension
10.1.3 (Build OAEXT_MAIN_NT_100429.1954.1314)
My Jdev Version
10.1.3.3.0
EBS - OA Framework
12.1.3
EBS- Oracle OA Extension
10.1.3 - build 1313
please suggest me do I need to check any profile option to set AM State or any other solution for this.
Thanks in advance,
SAN

Hi.
Try adding some debugging statements using write diagnostics .
Check to see if VO is getting cleared on loading 2nd page.
Alternate solution would be to add these line id's of the selected lines before forwading.
On 2nd page, get these Id's and do whatever necessary.

Oracle event alert not activated after fndload to new environment

Hi,
Oracle event alert not activated after fndload to new instance, it works in the development instance, checked that the SQL should return row, any hints please.
Thanks,
CY

Please post the details of the application release, database version and OS.
What was the command used to download/upload the alert?
Please see if the following docs help.
Alert Is Not Working After Uploading By FNDLOAD (Doc ID 1087572.1)
How to transfer alert definition from One Instance to another instance using cmdline script (Doc ID 400295.1)
How can you move an Oracle Alert from one instance to another from the Operating System level? (Doc ID 376891.1
Thanks,
Hussein

My phone not active after update

my phone not active after update

The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
There is a chance activation servers might be down/slow for now. Just keep trying throughout the day. Some other forum users are experieincing similar things.
You can also try the apple document for activation issues, but I'd assume its server issues. http://support.apple.com/kb/ts3424

My i phone is not activating after i up date my i phone 3gs can you help me

my i phone is not activating after i up date my i phone 3gs can you help me

See your Other post on this Topic...
https://discussions.apple.com/message/23620536#23620536

WINDOWS NOT ACTIVATED

I bought a HP ENVY 15 form the US since February 2015 and brought it over to Liberia, West Africa. It keep saying "Windows Not Activated go to PC settings to activate Windows". I've done that but still nothing seems to happen. It gives me this message'Windows can't activate Try again later'. It also asks me for product key, which I never found on the back of my PC.This is a brand new computer that I bought from Amazon with a very huge amount of cash. This product will expore by July 5, 2015. Please help me solve this problem. It is very dissapointing.

well i have one solution but i cant talk about it on here so if you can email me [email protected]

Error 109 : MaxL api instance is not Active after installing excel add-in

Hello Gurus
I am getting error Error 109 : MaxL api instance is not Active while expanding essbase server in EAS console.
I am using EPM 11.1.2.1 on Windows server 2008 x64 with MS Office 2007 x32
EAS was working properly before installing Excel Add-in,
What i did is
1. I first installed excel add-in and when I clicked on connect Log-in screen didn't appears.
2. Then I reinstalled excel add-in and it started working properly and EAS was also working fine.
3. But after restarting VM, EAS is not working, it is giving error like "Error 109 : MaxL api instance is not Active"
4. I also searched on OTN for EAS issue and checked following environment variables
ESSBASEPATH : C:\Oracle\Middleware\EPMSystem11R1\products\ExcelAddin
ESSLANG : English_UnitedStates.Latin1@Binary
5. And also tried reinstalling EAS
Any help will be highly appreciated.
Thanks
Yash
Edited by: yash on Apr 10, 2012 8:01 PM

Hello,
I had the same problem, after add-in 's installation on epm 11.121
Without solution, I was forced to uninstall all epm and reintsall.
Is there another method to solve this problem ?
thx

Windows Not Genuine after cloning HDD to SSD

After cloning an HP OEM installation (that originally had the HP OEM activation) from the original HDD to a new SSD, Windows started popping up with the Windows not genuine message.
Windows DOES claim that it's activated.
What I've done is:
http://windows.microsoft.com/is-IS/windows/help/genuine/product-key#T1=tab01
and changed the product key to use the key from the COA sticker on the system. This didn't work.
As an Run As Administrator CMD prompt,
slmgr.vbs -upk
reboot
slmgr.vbs -ipk {<var>ProductKey from COA sticker</var>}
Still no joy, still comes up showing activated and not genuine.
C:\Windows\system32>cscript c:\windows\system32\slmgr.vbs -dli
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_SLP channel
Partial Product Key: 6F4KF
License Status: Initial grace period
Time remaining: 29520 minute(s) (20 day(s))
I actually have this issue, exactly the same procedure cloning on 12 identical machines with the same factory image, but the problem is occurring only on 4 machines.
What next?

Here's the diagnostic report.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-82YFB-X6MYH-6F4KF
Windows Product Key Hash: PwhZ52MI36WbeWoIz2qTGN2t/wc=
Windows Product ID: 00371-OEM-9303931-16424
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {561F9D4B-7A94-46A4-ACD2-D4D00356A876}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{561F9D4B-7A94-46A4-ACD2-D4D00356A876}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-6F4KF</PKey><PID>00371-OEM-9303931-16424</PID><PIDType>8</PIDType><SID>S-1-5-21-3908971138-2361837996-340176589</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP
Compaq 6000 Pro SFF PC</Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>786G2 v02.02</Version><SMBIOSVersion major="2" minor="6"/><Date>20110623000000.000000+000</Date></BIOS><HWID>36C83E07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern
Standard Time(GMT-05:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-BPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_SLP channel
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-039-316424-02-1033-7601.0000-0652015
Installation ID: 013705630213328424659420025050127512482082812695747381
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 6F4KF
License Status: Initial grace period
Time remaining: 29340 minute(s) (20 day(s))
Remaining Windows rearm count: 0
Trusted time: 3/20/2015 11:53:43 AM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 3:13:2015 19:29
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MAAAAAIAAQABAAIAAQABAAAAAQABAAEA6GHGhuRkTjQGGsTdgJ8iFd6IPNOe30bK
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           COMPAQ       EAGLLAKE
FACP           COMPAQ       EAGLLAKE
HPET           COMPAQ       EAGLLAKE
MCFG           COMPAQ       EAGLLAKE
ASF!           COMPAQ       EAGLLAKE
TCPA           COMPAQ       EAGLLAKE
SLIC           HPQOEM       SLIC-BPC

HT4061 not activating after restoring

hi
i have tried updating my iphone to os5.1 it did not , now after restoring it is trying to activate, it does not activate on wi fi & is not giving me the option of itunes, pls help

There are several possibilities:
Your firewall or antivirus is blocking access to Apple's activation servers - try disabling them
The phone has been hacked, unlocked or jailbroken - If so, there is no solution
The computer you are using has a corrupt winsock (if Windows). Open a command prompt window with Administrator privileges and type: netsh winsock reset, then reboot
The hosts database on your computer is corrupted. Open it with a text editor and delete any lines that contain gs.apple.com, then save it (you must do this as Administrator or with root privileges if you have a Mac)
Location of hosts database:
Mac: /etc/hosts
Windows: c:\windows\system32\drivers\etc\hosts

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Images are not shown after deploying in apps

After deploying my application in apps i have put all my images in media folder even then the images are not displaying, can any tell me what is the reason for this, but when i have deployed before it was working fine...

when the page is displayed without the image, right click on the image place holder and click on properties. Under General tab,
address will show you the place/url page is looking for the image. Make sure you have put the image on that path and the name of image mathes the case as well.
--Tanveer

Adobe Javascript buttons does not work after deploying by ADS

Hi,
I have a dynamic PDF with adobe javascript " addInstance (1) ". In the preview of Adobe Lifecycle the PDF works like it should. However when I deploy the PDF in Developer studio the button is working anymore. It looks like the PDF isnt dynamic after deployment.
I have tried to add the following code , but it isnt working:
IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm1");
iForm1.setDynamicPDF(true);
Also, the properties of the PDF is set to Interactief Form, and XDP preview format is Dynamic PDF.
Does anyone know what the problem is?
Thank in advance.
Thaibinh
Application details:
Acrobat Reader 7.0.9 and higher
Adobe Live cycle 7.1
Developer studio S 7.0.13
AdobeControl version 6.3018.0.1
Type browser Internet Explorer 6.0
Operation system Linux
Type of interact form ACF
Netweaver 2004s

Hi Harman,
Am i inserting the code at the correct spot?
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
       provided by Web Dynpro. Provides access to the view controller's
       outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
       by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
       Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
       during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateInfosessieenqueteView wdThis, IPrivateInfosessieenqueteView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
     if (firstTime) {
     IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm");
     iForm1.setDynamicPDF(true);
    //@@end

Windows not activating

I bought laptop hp pavilllion p 027 TX laptop pre installed with windows 8.1.
But windows is not activating even if i am connecting to internet.
i am calling customer care from last 10 days but i m not getting proper replies.
i tried Windows update,BIOS update,Activation via phone,and even i resettted my laptop.
i tried calling microsoft .They told installation id is invalid and to contact hp.
but i m not getting help from hp..
Plesase help.

Prajwaldr wrote:
I bought laptop hp pavilllion p 027 TX laptop pre installed with windows 8.1.
But windows is not activating even if i am connecting to internet.
i am calling customer care from last 10 days but i m not getting proper replies.
i tried Windows update,BIOS update,Activation via phone,and even i resettted my laptop.
i tried calling microsoft .They told installation id is invalid and to contact hp.
but i m not getting help from hp..
Plesase help.
Then you need to take it back to where you bought it and ask them for help? What are you talking about ID is invalid? This part is confusing and not very clear?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Windows 7 not activating after deployment

Similar Messages

Maybe you are looking for