Windows 7 Not Detecting MacBook Pro ...

Hey all,
I have just purchased a brand new MacBook Pro and I am finding it hard to connect to it using my Windows machine.
I have made sure that under the Sharing Option - File Sharing is Enabled. I have also gone into the options within "File Sharing" and enabled SMB and ticked my username.
When I go onto my windows machine under the "Network" section my mac is not showing. I am trying to do this over my wirless network and off course both computers are connected to it.
Any ideas on how to fix this?
Hope someone can help,
Harry
P.S : I have made sure everything is up to date with the latest updates.

Make sure the Document folder is shared and that your account has full Read/Write permissions.
You can share your whole username folder with those permissions and it will carry over to the Doc folder.
Personally I have no problems sharing any files back and forth between Windows and OS X. But then I have the same username and password on all computers and I share the Macintosh HD, Yes the whole drive, with Read/Write permissions for my username.
Other then that it may be a Wireless problem where either the Mac or the Win PC is dropping the connection or your wireless router is crapping out with large file transfers.

Similar Messages

Facetime HD Camera not detected - MacBook Pro 13 Retina (Late 2013)

My MBPr 13 (Haswell / i7/ 16 GB / 512 SSD / OS X 10.9.1) is roughly 2 months old. A couple of weeks ago the camera had 'disappeared' but this was resolved after a reboot. Then, a couple of days ago it disappeared again. What is happening is this: when I start Facetime (or Photobooth), I get a black window which says - "No camera connected"
Have tried the following:
SMC Reset
PRAM Reset
Uninstalled Skype
Created a new 'test' user, did a safeboot and logged in as the 'test' user.
Still no camera.
Camera also does not show up in System Report either under Camera or under USB.
Updates performed in the last week include Digital Camera RAW compatibility update for iPhoto and iTunes 11.1.4
Looks like I'll have to take it in. Would be grateful if any inputs from the community can help.

Update:
I took it to the service center where the guy connected it to his server and ran Apple Service Diagnostics which detected the camera.
He says the hardware is fine and recommends a restoration.
Question: Is there any way I can restore the OS and not have to install my applications again?

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I am trying to download windows 7 on my macbook pro but it keeps saying the disk cannot be partitioned because some files cannot be moved.

Its all in the title. I am trying to use bootcamp to download windows 7 on my macbook pro mountain lion, but I keep getting this error. I tried going to Disk Utility, and my active volume already is formatted under Mac OS Extended (Journaled), so I don't know how to fix it. I already backed up the volume on an external harddrive. Also, everything under the volume I wanted to edit is greyed out, and when I try to restore the backup that I created via time machine, it pops up with another error that says "Could not unmount volume "/" (Resource Busy).
Please be gentle, I'm used to using windows and don't know like anything about computers. If someone could give me a detailed explanation for these errors and a solution of how I could correctly download windows on my mac I would greatly appreciate it. Thanks!

Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014

Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?

yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid

HT5266 best resolution in windows 8.1 on macbook pro retina 15 ?

Hi
which resolution is the best in windows 8.1 on macbook pro retina 15 ? for software Like SolidWorks or the other? because the recommended resolution is good but some software like SoliWorks not optimized for retina resolution !!!
Thanks

Is your rMBP a dual-GPU model, or does it only have the Intel Iris GPU?

Can i use microsoft office for mac on windows 7 installed on macbook pro?, can i use microsoft office for mac on windows 7 installed on macbook pro?

I have recently installed Windows 7 on my Macbook Pro (2011). I have also recently got Microsoft office for Mac 2011. Can somebody please advise if it is possible to use (install) office for mac 2011 on this windows 7 that i have installed. If possible, how to do it?

No it is not possible.
You can use office for mac, on OSX, but not on windows.
You need to use the windows version, on windows 7.

Windows 7 Not Detecting MacBook Pro ...

Similar Messages

Maybe you are looking for