Windows 7 not Displaying my screen

I have an MBP 13 inch mid 2012 and am trying to connect my windows 7 partition to an acer P1201. It sees the device and my mouse can leave my main screen but nothing is displayed on the video projector. I should also say that it works perfectly on my mac os x 10.7 partition. I am connecting with a VGA cable.
Something else : when I reboot windows 7 with the projector on, I can see the windows logo on the projector.
If anybody has any idea what I should do ?

Seems they found a solution following the link in this page : https://discussions.apple.com/message/2869920#2869920
But I can not access it.

Similar Messages

Acrobat Pro XI v.11.0.06 - PDF created by Microstation Print Organizer - Windows 7 - Printing shaded squares on top of shaded building and not displayed on screen, only displays on paper when printing

I have attached an image of the sheet to show the areas that are shaded. The building is supposed to be shaded, however the two squares within are not. These squares are not in the file converted to pdf and do not display on screen when viewing the pdf. Also there are several sheets in the set with shaded buildings and only two of the buildings have this issue. Any help with this would be greatly appreciated.

I'm seeing this same problem happen on multiple platforms here in the office. Every time this happens, the screen view does not show these shapes. I have been seeing the same problem except linework will be missing in one of these square shapes as well. Please give feedback if anyone knows what causes this problem. One thing to note - these squares are the size and placement of a selection box within acrobat. For example, if i use the selection tool and click near where the problem printed out, the shaded area that gets selected is in the exact same spot and is the exact size.@

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

Photoshop window does not display unless connected to external monitor

I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
Is this a known issue?
Any workarounds?
Any ideas?
There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

HT201263 IPad starts but will not display home screen.

IPad starts by will not display home screen. Seems to be suspended but will not respond.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Some JPG images, stored in DB, do not display on screen/image item.

Hi friends,
I have a form to save and retrieve images (JPG, GIF, TIF) to and from DB, using WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB and CLIENT_IMAGE.WRITE_IMAGE_FILE respectively.
It’s working fine, but with few JPG images, it stores in DB but do not display on screen/image item.
Secondly, if I try to retrieve and write this JPG to OS (using CLIENT_IMAGE.WRITE_IMAGE_FILE), it prompts error “FRM-47101: Cannot write image file”.
Environment:
Forms [32 Bit] Version 10.1.2.0.2
OS XP Pro 2002 SP3
Oracle DB 11g Enterprise Edition Rel. 11.1.0.7.0 - 64bit
Any help will be highly appreciated.

Hi,
I have done a workaround here, which worked for me.
My requirement is to direct save images in DB. So my system was just saving images without knowing if picture would display on form or not later.
I created a (non-DB) image item on form and added a code (CLIENT_IMAGE.READ_IMAGE_FILE) to place image in this image item, if it successfully display image then save image directly in DB using code (WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB).
Note: - If CLIENT_IMAGE.READ_IMAGE_FILE fails it raises exception and it means image has invalid format/internal data header and system does not save image in DB.
Now I have a kind of a filter to stop saving pictures which do not display later on form. :)
Edited by: user12173428 on 29/09/2011 16:38

JSplitPane not displaying on screen

Someone please help me. Stuck on this problem for 3 days now but just cannot see the answer. JSplitPane just does not display on screen. When I call it from within the class xer it appears as a little rectangle of about 2mm by 4 mm insize. When I call it from within actionPerformed I just do not see anything at all. I need to call it from actionPerformed as a final solution. Please give the answer based on it being called from actionPerformed. Thanks.
Peter Loo
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.tree.*;
import java.util.*;
import javax.swing.event.*;
import java.lang.*;
public class xer extends JFrame
JPanel erPanel;
Container contentPane;
public xer()
contentPane = getContentPane();
erPanel = new JPanel();
contentPane.add(erPanel);
// Menu
ErMenu erMenu = new ErMenu(contentPane, erPanel);
setJMenuBar (erMenu.getErMenuBar());
// If I call Define Report here I have small JSplitPane about 2mm by 4 mm size
new DefineReport(contentPane, erPanel);
pack();
setExtendedState(Frame.MAXIMIZED_BOTH);
setDefaultCloseOperation (DISPOSE_ON_CLOSE);
setVisible(true);
public static void main (String args[])
new xer();
* Processing for menu
class ErMenu implements ActionListener
Container contentPane;
JPanel erPanel;
JMenuBar erMenuBar;
JMenu fileMenu;
JMenu reportMenu;
JMenuItem defineMenuItem;
JMenuItem runMenuItem;
DefineReport defineReport;
StringBuffer currentScreen;
* Create menu & menubar
public ErMenu (Container contentPane, JPanel erPanel)
this.contentPane = contentPane;
this.erPanel = erPanel;
// Menu bar
erMenuBar = new JMenuBar ();
// Menu reports
reportMenu = new JMenu (" Report ");
defineMenuItem = new JMenuItem ("Define Report");
defineMenuItem.setActionCommand ("MenuItemDefineReport");
defineMenuItem.addActionListener (this);
reportMenu.add(defineMenuItem);
runMenuItem = new JMenuItem ("Run Report");
runMenuItem.setActionCommand ("MenuItemRunReport");
runMenuItem.addActionListener (this);
reportMenu.add (runMenuItem);
erMenuBar.add (reportMenu);
public JMenuBar getErMenuBar()
return erMenuBar;
public void actionPerformed (ActionEvent e)
String menuaction = e.getActionCommand();
if (menuaction.compareTo ("MenuItemDefineReport") == 0)
// If I call Define Report here I do not get the JSplitPane
defineReport = new DefineReport(this.contentPane, this.erPanel);
* Main processing for Defining a report
class DefineReport
JPanel erPanel;
Container contentPane;
JSplitPane erJSplitPane;
public DefineReport (Container contentPane, JPanel erPanel)
this.erPanel = erPanel;
this.contentPane = contentPane;
// this.contentPane.invalidate();
// this.contentPane.removeAll();
// this.erPanel.invalidate();
// this.erPanel.removeAll();
erJSplitPane = setupErJSplitPane ();
erPanel.add (erJSplitPane);
// contentPane.add(erPanel);
contentPane.setVisible(true);
} // End of constructor DefineReport
public JSplitPane setupErJSplitPane()
JScrollPane listScrollPane;
JScrollPane treeScrollPane;
listScrollPane = new JScrollPane ();
treeScrollPane = new JScrollPane ();
erJSplitPane = new JSplitPane (JSplitPane.HORIZONTAL_SPLIT,
listScrollPane, treeScrollPane);
erJSplitPane.setOneTouchExpandable (true);
erJSplitPane.setDividerLocation (50);
Dimension minSize = new Dimension (50,50);
listScrollPane.setMinimumSize (minSize);
treeScrollPane.setMinimumSize (minSize);
listScrollPane.setBackground(Color.red);
listScrollPane.setForeground(Color.red);
treeScrollPane.setBackground(Color.blue);
treeScrollPane.setForeground(Color.blue);
return erJSplitPane;
} // End of class DefineReport

I have read all the tutorials that I can find and it
seems (at least to me) that I have done everything
necessary. I am really quite new to Java.
Peter LooIts called a learning curve dear, we've all been there

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Bad video card, call Apple, get a case number and return it.

Windows could not display the images available for installation

I am trying to perform unattended installation of windows which I created with Windows AIK. When I add answer file on USB's with windows installation root I get "windows could not display..." message. Problem is there even when there are just a
few simple lines (oobe, microsoft international core-WinPe).
I replaced install.wim file of standard windows installation iso with customized install.wim and then created catalog file with windows system image manager.
Kind people of world, please help!

Hi bugili,
Could you help us post the complete error information, it will more helpful when we locate the issue. I am not quite understand “add answer file on USB's with windows
installation root”, do you mean the answer file and install file on the external device? Please try to confirm this image has the same Security permission with
others image in WDS image share folder, the WDS default image location is like
x:\RemoteInstall\Images.
If it not work please post the WDS error log,
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
The simlar thread:
Windows could not display the images available for installation.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/07fe03dd-9798-4583-8d0b-dc963c95434c/windows-could-not-display-the-images-available-for-installation?forum=winserversetupMore
information:
How to Add a Boot Image to WDS Server
https://social.technet.microsoft.com/wiki/contents/articles/11643.how-to-add-a-boot-image-to-wds-server.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Windows could not start this screen saver"

My timeline playback gets interrupted by Windows' dummy screen saver consisting of a blank screen with the message "Windows could not start this screen saver". I'm running Premiere CS 5.5 on Windows 7. I only see this message while Premiere is running so Premiere must be doing something that blocks the current screen saver but doesn't block Windows from attempting to start it. Is there a way to keep Windows from attempting to start the screen saver at all (other than selecting no screen saver in Windows) so it doesn't interrupt playback?
Roy

years ago screen savers helped keep crt monitors from getting 'burned in' areas of dead pixels etc from the screen being on a static image for too long. over the years this problem has been almost totally eliminated by monitor manufacturers i think.
i know people who worked in pro graphic houses that never turned off their computers, never used screen savers, and never did power management stuff ... the computers were on 24/7... and they never had problems.. and that was like more than 10 years ago.
i do have a nice snake screen saver that is static and / or animated if you want to try it out, but frankly, i would turn all that stuff off ( power management, screen saver ) and either leave your computer on all the time 24/7, or else just turn it off when you leave the computer... turn it back on when you want to use it. is only a button on tower to turn on and off usually.. easy.
let me know if you want snakes though... they are very cool and scary !

Home window does not display properly

When I first sign on to Firefox, the home window (Google) is displayed too far to the right of the screen to use. The only fix I have found for this is to slightly re-align the screen by moving the tab in the bottom right corner. This alignment problem is not critical, but is irritating since the screen must be re-aligned for each signon.

Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Make sure you didn't Zoom the webpages.
Ctrl+0 -> Normal View.

QuickWatch windows does not display Value and Type.

The quick watch window is only displaying Name (screenshot below). It is not displaying Type
and Value fields. I tried "Reset All Settings", repair, uninstall/install but the issue is not resolved. I will appreciate any help.

Hi ranjanks,
Could you share us a sample? So we could debug the same app in our side, please also tell us the VS version in your side.
For example, just a simple console app with a variable "int i"， I could get it in my VS2013 version like the following screen shot. So if you debug a simple sample as mine, how about the result? If it works well, I doubt that it would be related
to the specific variable of your app.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PS Elements 9 Organizer window will not display

I've been using PS elements 9 for a long time, today I wanted to import new JPG's and started the program, organizer started but the window that normally displays the organizer, did not come up, when hovering over the organizer icon on the task bar the small image of the organizer shows up but when an attempt is made to open the window, nothing happens. I am able to open and view/work using the Editor, but not the organizer. All other programs display properly. I have power cycled the PC and re-installed program from the original disk with no success. Can anyone help?

Moved from Photoshop forum to Photoshop Elements forum

Z97 PC MATE - Second GPU will not display / black screen

Using Z97 PC MATE with 2 nvidia cards (GeForce GTX970 and GeForce GETX750ti). My goal is to use the 750ti for dual display with the 970 reserved for compute in a 3D software package (houdini simulations). If both cards are installed on the mobo and one monitor is plugged into the 750ti, it will not display, not even the BIOS screen. Also there is no audio, there is normally a chime when the OS lock screen is reached and that never plays.
The 750ti is plugged into the PCEe 2.0 slot, the 970 the 3.0 slot. Both cards can display in their respective buses by themselves if only one card is installed. If both are installed, the 970 will output a display as expected. I have also tried an older quadro card in the 2.0 slot and it also defaulted to the 970 in the 3.0 slot. With one display plugged into the 970, and one in the 750ti I have gotten an image to display on the 750ti. But never with only one monitor plugged into the 750 attempting to use that card as the main display.
I have used m flash to update the bios to 4.6, but I never used the disc which came with the mobo to update. I thought maybe there is a GPU display priority in the BIOS but I'm not seeing it. I see there is a way to prioritize UEFI and legacy, and Gen1, 2 or 3, but don't know how that should be set up for this (if that is the problem). I would think if that were the case though the audio at the lock screen would still play, but I don't know.
My current nvidia driver version is 342.22, I am using Ubuntu 14.04 as linux OS operates better with the software I am using. I have also posted to the Ubuntu forums about this, but thought I would post here because the BIOS screen doesn't display which makes me think it could be hardware related. Although all of the hardware is detected properly and appears to be functioning as expected.
This issue was reproduced with and without the HDD connected.
Hardware:
i7 4790k
EVGA GTX970 and EVGA GTX750ti
Z97 PC MATE
32gb PNY DDR3-1866 240-pin DIMM
Antec Truepower Classic 750w gold certified
PNY Optima 480gb SSD - PNY SSD7SC480GOPT-RB
Hitachi 2TB ultrastar HDD
I am not sure at this point how to continue troubleshooting this issue, or if this is not possible for this mobo and I just didn't recognize that. One test I was considering is putting the 970 in my old computer (MSI 970FX-GD70) and seeing if the results are the same. Will post any additional required information.
thanks!

Did you install your graphic driver when both vgas are on? Let the driver detect both vga then you can just switch cable and display well. Use the latest 344.65 driver. As for the 3D package, you need to make sure the software support or can change the settings that which vga to compute.
But there's one thing I need to make sure first, does your vga work with only one vga on pcie 2.0 slot? Just wanna be sure it's not faulty slot...

Windows 7 not Displaying my screen

Similar Messages

Maybe you are looking for