Windows 7 not seeing Radeon driver

Today did my first Boot Camp install of Windows 7 (32-bit) onto my iMac. All went smoothly except one thing: Windows is using its own generic graphics driver and apparently is not recognizing the Mac's ATI Radeon HD5670 board. Result: wrong resolution and aspect ratio, and I can't run software that requires the Radeon. I've reinstalled all drivers twice, and Boot Camp keeps telling me everything is fine.
Under Device Manager I'm seeing nothing except Microsoft's generic driver.
Any clue?

Go to ATI and download the latest Catalyst.
You will probably need to install the existing device driver and program.

Similar Messages

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

HT4407 my MBA is running windows 7 Home, 64 bit but windows is not seeing key hardware, i.e. network&sound. I followed the Apple directions "Installing Windows 7 drivers" and still no joy. Any help would be appreciated.

My MacBookAir is successfully running Windows 7 Home, 64 bit but Windows is not seeing key hardware i.e. network,sound and
camera. I have followed the Apple directions "installing Windows 7 drivers" and Windows is still not seeing hardware. Any Help would
be greatly appreciated.

Yes, I had MBA burn Apple's Window support software to a DVD. In Windows I am getting "Hardware not found" and during another attempt (using windows's update driver) "driver not found".

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

To connect my ipod to itunes with windows 8 not see the option to add to add songs from itunes library. As I can solve this?

To connect my ipod to itunes with windows 8 not see the option to add to add songs from itunes library. As I can solve this?

Since you can only sync your iPod with one computer at a time, you'll need to copy the contents currently on your iPod to your new iTunes library first. See this older post from another forum member Zevoneer covering the different ways to accomplish this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

Bridge CS4 Does Not See External Drive

Very suddenly, Bridge is not seeing the external USB connected driver I use to store recent photos. I read a similar message here and the writer was told to add the drive to favorites. That appeared to work for him, but I could not do that since the folder doesn't appear under Computer in the favorites section either. The drive appears in Windows Explorer. I am using Vista 32. Any suggestions?
Fran

Did you power up or connect the external drive after Bridge had been started? I've observed that Bridge only includes drives that were attached and active when Bridge was launched; it does not add a drive to its folders list if that drive is started after Bridge is active. With your external drive on (and appearing in explorer) try exiting and relauching Bridge.

Windows XP not seeing iPhone

Device manager not seeing iPhone. Problem began after upgrade to iTunes 8.0.2.20. USB ports working with all other devices. Computer sees iPod nano as does iTunes. Have uninstalled and reinstalled all iTunes components. usbaapl driver appears in DriveStore but because phone is not recognized cannot point hardware device wizard to the DriveStore folder. iPhone working normally otherwise.
Any/all suggestions appreciated.
Thanks, L. Edwards

Windows XP now sees a new piece of hardware but thinks it is a printer.
I can point it to:
C:\WINDOWS\system32\DRVSTORE\usbaapl_246F92BBD6449C86FC3F3F28C40D59AC1F69C558
It searches but comes up with "Cannot Install this Hardware" because the wizard cannot find the necessary software.
I am thinking that I may have a corrupt/wrong driver. Would appreciate any suggestions.
Thanks,
L. Edwards

Can't get Windows XP to see SATA drives

Please help
SATA Drives show up in the system hardware but not in My Computer or Explorer
K8T Neo FIS2R (Updated BIOS Yesterday via Live Update)
amd 64 3000+
Centon PC3200 (2 X 512 in slots 1 and 2)
WD 80 gig ATA drive (Windows Xp Home on this drive)
2 Maxtor 250 GIG SATA Drives (tried both Raid 0 and no Raid)
All drivers from CD installed (Updated drivers via Live Update Yesterday)
Promise disabled and using VIA slots
Nvidia FX 5900 Video card

Good evening -
Thanks for the response. I loaded drivers from CD. I want to keep the operating system on the 80 GIG ATA drive and use the SATA RAID for programs. The drives show up in the device manager and in the VIA RAID utility that came with the motherboard but I can't see or access them through My Computer. I have tried to set up the RAID through both the Windows software and through the Boot program, but no luck. When I tried to update the drivers from the floppy it said no newer drivers found. (I tried to update drivers through the Device manager.) Also when I deleted the raid and tried to set up the drives individually the same thing happened. Is it possible I don't have the BIOS set up correctly? I am at a loss.
Tony

Upgraded from vista to windows 7 not seeing music list

I upgraded from vista to windows 7. When I sync my iPhone 4 I am not seeing my music listed nor my apps in the list. I had backed up my entire computer to my external hard drive and copied everything over to iTunes. But not showing up in any lists when I connect my phone???? Any ideas?

Hi,
I'm am used to working on Mac's but u don't think my advice will hurt.
iTunes reads your hard drive for songs and compiles a song list for them.
It then stores this data as your ituneslibrary.plist file.
In the file drop down menu you should have an option to select library.
Try reelecting your iTunes library icon and then it should reload your iTunes with playlists and play counts etc

New Airport Extreme (2014) does not see USB Drive

Just fired up my new 2014 Airport Extreme and attached a Toshiba 3 TB USB Drive. My new (late 2013 iMac) does not see the new drive in Disk Utility.
The Extreme works in all other ways; ie, as a router, as a wireless node.
It came to me formated as a Windows drive, so I attached it directly to my MacBook Pro (which saw the drive) and reformated it as a Mac Drive (Journaled, GUILD). It showed up just fine on the MacBook Pro desktop.
When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
Help Please

When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
That drive will not show up in Disk Utility on the Mac.....since the Toshiba hard drive becomes a network drive when it is attached the AirPort Extreme.
Disk Utility will not display a network drive. It will only display drives that are connected directly to your iMac via USB, FireWire, etc.
Check using AirPort Utility to see if the AirPort Exteme recognizes the drive.
Open AirPort Utility, click the AirPort Extreme icon, then click Edit
Click the Disks tab at the top of the next window that appears
The drive will appear here if it is recognized by the AirPort Extreme.
In the example below, my WD Drive is connected to the USB port on the AirPort Extreme.

Installer does not see hard drive, how do I mount

Initialized Hard Drive with current volume and as mac extended and zero'd out memory. This drive came out of a PC that had been out of whack and drive was partitioned wrong in the PC. It worked fine to load mac OS 9.2.2 and has 18 gigs free. When I boot off of the Tiger disc it does not see the hard drive at all. Neither does the disc utility function. I checked the firm ware and it is up to date. Ran disk warrior and it says all is ok. Is it something simple?
I can't figure out what it is I have over looked. Thanks

Try this instead:
1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If this is the second drive in your computer, be sure you have jumpered the drive as SLAVE (assuming the original hard drive is jumpered as MASTER.)

Does not see optical drive

My IMac does not see the optical drive, however, it is visibable in windows 7. I'm running Parallels

Exactly. It can only be connected to one at a time. You have to eject it from Parallels for it to be used by the Mac.
I initially thought you were using Boot Camp.

Time Machine will not see USB drive attaced to AEBS

I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates. Any help is appreciated.

have you tried formatting the drive, by selecting the disk or volume and using extended (journal). If the drive use to be a PC drive, you need to also give it a new index table. To give it a new table, you got to go to the partition section and use the option button. There will be 3 types, the GUID table is for intel macs, the 2nd selection is for PPC macs, and the third is for Window/Dos. You want to use to GUID table. After the table is set, format the disk using extended (journal).

I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant. The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work?

Windows 7 not seeing Radeon driver

Similar Messages

Maybe you are looking for