Windows 7 on a lan does not connect to a hp 855c connected to a xp machine.why?

I have 2 HP computers on a LAN.One is a p6140f running Windows7;the other is a HP Pavilion 7955 running Windows XP.
A HP Deskjet 855C printer is connected to the Pavilion.Trying to connect the printer over the network to the Windows 7 fails with the message that a wrong driver has been installed on the printer server.I have been to the HP site and installed the latest local printer driver on the Pavilion,but that did not fix it.I am seeking advice on how to use the Deskjet for printing from the Windows 7 on the LAN.
MahendraPatel

Unfortunately, the HP Deskjet 855c Printer series is not supported for Windows 7.
While you can try to share the printer from the Windows XP system to the Windows 7 system, a Windows 7 driver is still required on the Windows 7 system.
Click on HP Products Not Supported in Windows 7 for a list of printers that are not supported on the Windows 7 operating system.
The best option may be to upgrade to a printer that is Windows 7 compatible.
Edited for spelling.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

G580 Broadcom wireless lan does not connect to any network

I am using Windows 8.1 64bit with my lenovo g580 and e530c both laptops having problems with wireless connectivity as follows:when i want to connect to a network after entering the password the network logo in the system tray goes to disabled then returns to not connected status ie a white cross inside a red circle instantly shows up on the signal strength meter on the system tray then in is not connected.i usually try many times to connect and turn off and on the adapter disable and enable but it does not change anything also tried many drivers and the same problemthe router for sure works properlly with all other devicesits really annoying nowso please advise ^___^ thanks in advance

What router?
Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My adobe Flash player does not connect on my Laptop HP Windows 7.

My Adobe Flash 11 Player on my laptop HP Windows 7 does not connect. (or cannot be found even though it is downloaded in the programs

What means "not connect" or "cannot be found"? Do you get any messages?
You write "downloaded", but did you also install it?
What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

ITunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verizon 11.0.2.26 but no matter what I try it does not connect. HELP P

iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

http://support.apple.com/kb/ts1538

App-Manager does not connect to Firefox OS Simulator on Windows 7

OS: Windows 7
Firefox: 28
Firefox OS 1.2 Simulator 6.0pre8.20140112
When I start the Simulator it opens fine and I can see a Firefox OS Desktop
But the App Manager does not connect. The console at the right bottom just says:
...connecting to localhost:56455 (the port varies)
...connection timeout. Possible causes: didn't click on 'accept' (prompt).
...disconnecting
...disconnected
I disabled my firewall, restarted firefox and even the system - did not help
there is a similiar bug - but I am not sure if we are talking about the same:
https://support.mozilla.org/en-US/questions/988385
Thank you

well - I already knew these links and I can`t find anything helpful there
anyway, I tried the (unstable) Simulator for 1.3 instead of 1.2
this one works fine

Windows 8.1/IE 11 Does Not Automatically Connect to the Internet

Windows 8.1/IE 11 Does Not Automatically Connect to the Internet
I can't find the dial and redial options anywhere.
I' m connecting through PPPOE but only manual.
I know that in windows 7/8 a program like IE9 or IE10 could connect to the internet, but now it just says that I am not connected to the internet.
How to connect automacally to the internet and how to let IE to connect automatically to the internet, and why I don't have the options for dialing and redialing like in Windows 8?
Thank You

Hi,
Sorry for my dilatory reply, what does your mean that IE dialing to connect to internet? Did your system can connect to Internet? or just IE 11 couldn't connect to internet. you can
check your IE poxy setting in Connections of Internet options.
If you encountered any IE problem, you can try to reset IE for test to resolve this problem.
If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support

My Windows Laptop does not connect to my apple 4th generation time capsule can not connect to internet.

I have a HP laptop running Windows 7. I a habe a 4th generation time capsule for wireless internet. everytime my laptop restarts it will not pick up and run the internet. i have to run the trouble shooter program to get it to reconnect. Sometimes this works sometime it does not the laptop and time capsule are both up todate on all the softwhere.

Is the TC working in router or bridge mode??
Have you set SMB compatible names.. short, no spaces pure alphanumeric.. not apple names.
Have you set wireless with different name for 5ghz.. and set channels manually and tested them.
11, 6, 1 for 2.4ghz in that order. Low.. say 36 or 40 and around 150 for 5ghz.
Test with no wireless security.. is it then working.. if so, then set wpa2 personal security with a password of 10-20 characters pure alphanumeric.
On a computer /device that does work find out the following.
DNS and Gateway.
When the PC connects to the wireless does it get the right values for DNS and Gateway.. if not then the TC is either incompatible or wireless driver is not compatible.
The fact that your windows is up to date does not mean the wireless drivers are.. Intel make the worst drivers.. if the laptop has intel wireless card. Expect trouble.
Download direct from Intel the most current driver and the last 3 or 4 available.. not even the latest is a guarantee it will work.
Even if everything is right.. dns gateway.. connection.. security.. wireless channel.. it is wireless.. it can still refuse to move packets.. it is simply the nature of the beastie. Wireless is 80% voodoo still.
Buy a different wireless chipset USB stick.. or get a wireless router like a TP-Link.. very cheap, $30-50 and use it as a WAP plugged into the TC.

My windows 7 does not connect to the internet

my macbook pro does not connect to the internet wired or wireless

Have you installed the Apple Windows Support files you downloaded when using Boot Camp Assistant?

When I plug any of my phones into the computer it does not connect.

When I plug any of my phones into the computer it does not connect. I can hear a beep but that's it. I checked all of my USB cords and the same results. Normally it would download my new pictures and start charging and that no longer happens. When I plug my wall charger in the phone charges.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

VC does not connect to Portal

Hi,
I'm using VC 6.0 Patch 2 on Windows 2003 Server with IIS 6.0.
My problem is this:
When I launch VC and Select Data Services it tells me "Not connected to a Portal Server".
I notice a combo box in the top right labelled Portal with a stoplight next to it. I enter in http://<portalservername>:<serverport> and a popup browser with my portal Welcome screen appears. I enter in what I think is a userid that exists in the R/3 backend system and which I believe is mapped in the Portal, however, after I press enter, the browser flickers and shows me the Welcome screen again.
If I close the browser, it pops up the same "Not connected to a Portal Server" message.
Does my user need a certain role or permission to allow for this connectivity? (Currently I have assigned all roles to this user.)
Any help would be greatly appreciated, thank you.
Regards,
Sean Machado

Hello again,
I use the same login that I use when logging into the Portal and with that user I did the following in the Portal:
1. I created a system and saved it in the Portal Content folder. I successfully created an alias for it.
2. In User Administration -> User Mapping I search for my user id and select the alias I created in step 1. I map the user to the alias and enter in the proper parameters for my connection to my R/3 server. I save the user id map and close it. I completely log off the portal and then open the VC and Select Data Services. The same thing happens.
On the Welcome screen to the portal, I enter in the user id I just mapped and the screen flickers, showing me the Welcome screen again; it does not connect to the portal. As a test, I entered in bogus user id information to see what would happen, and an error message displays: "User authentication fails", so at least I know the user id is fine ... it has to be! I used it to configure things inside the portal!
Do you have any other ideas?
Thank you in advance,
Sean Machado

Since upgraded to 10.4.0.80, iTunes does not connect to iTunes Store

I recently upgraded iTunes to 10.4.0.80, and since then iTunes does not connect to iTunes Store anymore. There is no error message, the window is just completly empty.

I'm having the exact same issues regarding not being able to connect to the iTunes Store. Running Windows 7.
Additionally, my iPhone 3GS (32GB) and iPad 2 (64GB) will not sync when attempting to perform a full system restore.
Also running ESET Antivirus software. I tried the following from Apple Support and neither worked:
http://support.apple.com/kb/ht1923
http://kb.eset.com/esetkb/index?page=content&id=SOLN760
I completely uninstalled and re-installed iTunes 10.4.0.80 and zeroed out IOS 4.3.5 on each device.
Additionally, I went to Control Panels > Administrative Tools > Services and stopped and restarted "Apple Mobile Device" and "Bonjour Service".
NOTHING WORKED ... STILL NOT ABLE TO SYNC.
I AM HAVING REAL DOUBTS ABOUT PURCHASING THE iPHONE 5 IF THIS SYNCING ISSUE PERSISTS !!!

Windows 7 on a lan does not connect to a hp 855c connected to a xp machine.why?

Similar Messages

Maybe you are looking for