Windows 7 on Boot Camp with regular Leopard (10.5.8)?

Hi all,
I have a MacBook Pro from Late 2006 (I think, based on the serial number...) and I want to install Windows 7 on it via Boot Camp. I think this should work, but I only have Leopard (10.5.8) and not Snow Leopard, does anyone know if this will be a problem?
Thanks!

Post in the Boot Camp forum.

Similar Messages

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Installing Windows 7 in Boot Camp with iso

I have downloaded an .iso file with Windows 7 on but I can't install it in Boot Camp. I've tried several things with no luck.
1. For the first, when I start up Boot Camp assistant I can't choose to "Create a Windows 7 install disk". I only have the two bottom options, the one for downloading support software and the one for installing windows 7. So I can't use my .iso file there.
2. I tried to burn a bootable dvd with the .iso file. I burned it on a Windows PC since my superdrive won't burn on the discs I've got (DVD+R). The disc works properly on the Windows PC but when i mount it in my Macbook I only get a popup that says I've put in a blank disc and some options of what I wan't to do next.
3. I tried to make a bootable flash drive and that pops up in finder, but the Boot Camp assistant won't recognize it and says I have to put in a Windows 7 install disc.
4. I also tried to open the image file in disc utility, but the result is the same as if I'm trying with a flash drive.
I'm out of ideas now so it would be nice if someone else knew any other possibilites to install Windows 7 in Boot Camp.
Or maybe there is an solution for the things I've alleready tried?
I'm using a MacBook Pro late 2008

Does it boot off the internal?
Is the external a full copy of your working system?> whew! then you can always wipe it clean and start over.
As long as the partition was created properly.... though 50GB can work it can also be slim fit in the end.
Under the worst condition - and the Mini is one of the worst, too - two minutes maybe to restart.
External because there never was an internal DVD player?
zap pram.
did you buy DVD or burn DVD? if burned, then that is likely cultprit Redo at slowest burn speed (2x) with verify.
Heck, even Windows 7 SP1 has been implicated on some were pre-SP1 worked.
For a test, there is Windows 8 RP for free. And Parallels 7 will set up a VM for you with the whole download and inistall. Not everyone needs to run natively.

Am I able to install Windows 7 in Boot Camp with this HDD partition setup?

I recently upgraded from Snow Leopard to Lion, and my Boot Camp partition was obliterated beyond recognition. Fortunately I have backups, but I'm having issues re-installing Windows 7. This is what my disk looks like:
Mac OSX - Current Lion partition
Untitled - Where Boot Camp / Windows 7 used to live...
Shared - 1TB of shared data... Media/Documents/etc
This is the error I get when trying to install Windows 7 with Boot Camp Assistant...
From what I can tell, this means I won't be able to do it without wiping the Shared partition? Or is there a workaround I can use? I'd really hate to have to move all of it over to an external hard drive, since I don't have one with 750GB of free space handy...
And would this probably happen again once Mountain Lion comes out? I'll be getting that pretty much on launch, so should I hold off on messing around with this if I'll likely have to do it all again in a few weeks?
Thanks in advance to anyone who can help!
- Mark

Why don't you invest in a 1.5TB drive and case? And add to that a TimeMachine drive (and a small 40GB or even less "Emergency OS X" partition on it... a must - could even have clone of Lion and Lion Recovery on it, AND TimeMachine partition.
If you don't have a backup, it almost always will "rain" on the parade.
If you try booting from Windows 7 DVD and aim it at the parittion, what happens? tried?
To use BCA yes it is one partition and one way only.
You could remove " - " the UNTITLED volume and then expand Mac OS volume to fill that area, or plan for and setup Lion Recovery space too.
http://support.apple.com/kb/HT4718
People have managed. Usually planning ahead up front for a setup like this.
CLONE OS X and ~ or install Lion on an external drive and create a Lion Recovery partition.
http://www.bombich.com/software/ccc.html
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html

Can I reinstall Windows 7 on Boot Camp with the same product key?

I have run into some issues with my Windows partition, so I want to reinstall Windows 7. I have a genuine copy of Windows 7 Ultimate Edition.
What I wish to do is to completely remove the Boot Camp partition, and then create a new one and install Windows 7 over it. However, I have only 1 product license key. When I reinstall Windows 7, it's going to ask for the product key, whih is obviously going to be denied because I have used it.
Is there any way I can acquire another key for this purpose? I am willing to pay a small fee, but I am definitely not willing to pay the full amount for a new Windows 7 copy.
Furthermore, and a little off-topic: Does anyone know if there are any compatability issues with the Windows 8 dev edition and Boot Camp? Can I use the support software for Windows 7? Will it be able to take advantage of the hardware? Will I get sound and internet? Will I be able to scroll with my trackpad?
Thanks.
[EDIT] I forgot to mention that the main reason I have to create a new partition instead of just Custom Installing over the previous one, is because I require a larger partition size.

Thanks for your help!
Not to be a pain, but I just want to clarify some things.
The hatter wrote:
The retail version can be reinstalled as much as you want, even to a new computer (just not two at same time)
Yes it will activate just fine on reinstall. Not an issue.
Let's assume I do not have issues about reallocating disk space, and just want to re-do my whole partition. Here's what I would do. Please tell me if it would work fine, or if I would hit a snag somewhere:
Have original retail W7 disk at hand (the one I previously used for my first install).
Remove existing partition using Boot Camp Assistant.
Re-install using the said disk.
W7 should activate without a problem, even though I've used the license before.
Do I have to do anything on Windows before re-installing it to "deactivate" the copy (or something along those lines) before I can re-activate successfully on my new install?
And what is System Builder?
Thanks for all your help!

Install Leopard with boot camp on snow leopard.

I upgraded to Snow Leopard and have a piece of line 6 hardware that is not compatible. Updated drivers are taking forever to come out and I need to use this hardware. I'm wondering if it would be possible to use boot camp to install leopard from the installation disk included with my macbook so that I can boot to it to use the line 6 device.
Any help would be appreciated.

The easiest way is to use Disk Utility in the Utilities folder to create a 2 partition set up. Disk Utility will be able to do this without erasing your existing information.
- Select your volume the one with the disk size at the top
- Click on Partition
- Change the Volume Scheme to 2 partitions
- Answer any messages and such
I am sorry since I have mine partitioned with BootCamp for my Windows 7 partition, I am unable to describe all of the steps as BootCamp locks me out of performing the rest of the steps.

Boot Camp on Snow Leopard can't install Windows-Stuck on black BIOS screen

I'm running Snow Leopard 10.6.8 on an early 2008 Mac Pro (dual 3.2Ghz Harperton CPU's, 10gb RAM) with Boot Camp version 3.0.4 (all updated). I've successfully had a Boot Camp partition in the past, running WindowsXP32 Bit. I just purchased Windows7 Professional and can't install either the 32bit or 64 bit version. Neither can I install any of my original Windows disc. Boot Camp successfully creates the partion, then asks me to install the Windows install DVD/CD which I do, and then when it reboots, it gets stuck in a black BIOS screen that says "Initializing..."
I've tried all my Windows discs: WindowsXP-32bit, Vista-32Bit, Vista-64Bit, Windows7-32Bit, Windows7-64Bit. Same problem...gets hung on the black BIOS screen. I disconnected all my USB hardware except for my keyboard/mouse. All my other internal drives are disconnected.
The only thing that I can think of is that is different is my MacHD is a 500GB Seagate MomentusXT solid state hybrid drive.
Any help is greatly appreciated!!!!!!!
Thanks

Hi fellow Mac buddie,
I just zapped the PRAM, and also reset the SMC switch on the mother board.....no luck.
In refenece to the hybrid SSD drive, I've already taken that one out, put in a fresh 3.5" drive, formatted and installed a fresh clean version of Lion OS, and then attempted the Boot Camp install using Lion with the newest Boot Camp version (3.1 or 3.2) Please see my original post above.
Same issue, black BIOS screen.
Also tried Boot Camp Windows install on a second drive in drive bay 2 (an option now in Lion's Boot Camp)
same issue, black BIOS screen.
Lastly, I've tried all these interations using my three different Windows install disks (XP, Vista, Windows7).
XP is a "full install" disk, Vista and Windows7 are upgrade disks. But I've had XP installed previously using Boot Camp with no problem. So I'm confused I can't even install XP.
As another option, I went to a friend who has a PC, and I installed Windows 7 on a new hard drive. I'm about to install that in drive bay 2, reboot while holding down "option", and see if I can boot directly into that disk.
That's a workaround, as is VMWare Fusion which I have and Windows7 works fine as a virtual machine.
But when something doesn't work the way it's supposed to (in this case Boot Camp), it bugs me makes me want to know why it doesn't. I'll report back with regard to the 2nd bay Windows7 hard drive install.
SPY500

Com port failed with boot camp and snow leopard - Please help!

Hi. I have been a very happy leopard and macbook user for the last couple of years. This week I upgraded to a macbook pro with OS X 10.6 snow leopard. I set up boot camp with Windows XP SP3as I have a couple of windows only applications that I need to use and they both need serial port. I had a Keyspan USA 19-QW serial adaptor that worked fine with Leopard and my old macbook. I installed the driver that came with the Keyspan adaptor. Now when I plug the adaptor into the USB slot it finds new hardware and says it is ready to use and the adaptor is listed in my ports as being on COM3 in device manager in windows but when I try to run the programs I get the message 'the selected port could not be opened. Either the port is in use by another application, or the port doesn't exist'. I'd be very grateful for any advice you can give me to solve this problem. Do I need to buy a new adaptor? Is this a settings or driver issue? I'm a user and not a techie person so please can you leave me easy step by step help. Many thanks. Karen

And was wodering if snow Leopard is pré installed
Yes.
And also which disc that came with thé machine has boot camp on it
None. Windows is a separate purchase.
i havé read that to install windows7 you need to pût thé snow leopard disc in to complete thé installation
That refers to the Boot Camp drivers for Windows, not Windows itself.
(53272)

Boot Camp with Windows 7

I just ordered a new MacBook Pro 17" and would like to run Boot Camp on it with Windows 7. If I just go ahead and buy Windows 7 from the Microsoft Store with a download CD will this work? I have heard rumors that you first have to partition it with Windows XP and then upgrade it to Windows 7? Any tips anyone has for me for doing this would be much appreciated.

Make sure your not looking at an "upgrade" version, you would have to have XP already in order to use Window 7 then. Otherwise it's just a rumor.
If you download it, all you have to do is burn the image at 2x speed like "Thehatter" said and then you will have a permanent copy also.
You might ask Microsoft, or do a search, and see if you have to burn it as an "ISO" (it becomes a Bootable disk instead of just a copy) or whatever. I haven't done it yet so I don't know myself. It might have instructions with the download.
Go here:
-- http://www.apple.com/support/bootcamp/ -- and read the Windows 7 FAQ, Boot Camp FAQ and the Installation Guide a couple of times and by the time your computer get's here you should have a pretty good idea on how to do it.
Basically you just click on BootCamp Assistant in the Utility folder and then just follow the instructions. Have the Windows 7 and Mac-OS Installer disk ready.
Download the Installation Guide and read it a few times to familiarize yourself.
It's really not that hard. You might even read some of the older posts in this forum just to see some questions and answers you might have.

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Having issues with installing Windows XP on Boot Camp

I installed the latest firmware for my MBP along with Boot Camp. I then tried to install a copy of Windows XP that I got from my friend (we'll name him Mr.Limewire). Anyways, I've tried to use 2 different copies of Windows XP and Boot Camp does not detect the cd still (it keeps saying to insert the Win xp cd). I believe I have using the full version of Windows XP. If a copy of XP is burnt on a Mac would that affect anything?

You really need to use a legitimate XP installation CD - a downloaded copy isn't worth the time for many reasons. Even if you did get it running, you can't register it and will have to reinstall a valid copy all over again to use it.
Also read the BootCamp FAQ's - XP must be a service pack 2 (SP2) release. If you don't see a folder "SP2" on the CD or some reference to it then you likely have a pre-SP2 release.
Another option is to slipstream SP2 and create an updated XP installation CD -
http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
but even this would be waste of time without a valid XP install disc.

I have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking.

i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.

At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that.

Is the Apple Wireless Keyboard fully compatible with Windows 7 in Boot Camp?

If you have an iMac running Snow Leopard and Windows 7, will the Apple Wireless Keyboard work properly in Windows 7 (via Boot Camp)?
I'm asking because a friend of mine has an Apple Wired Keyboard that they want to get rid of, and upgrade to an Apple Wireless Keyboard. However, their concern is that the Apple Wireless Keyboard won't work properly (or reliably) when they run Windows 7 on their iMac.

I'm using an Apple Wireless Keyboard running Boot Camp and Windows 7 64 bit right now typing this. Seems to run just fine under Windows 7 for me. Some of the familiar Windows keyboard keys are not present, of course, though there are key mappings to get to those too. I actually like this keyboard a lot, under Windows 7 or OS X.
Windows key mappings using Wireless Keyboard: http://support.apple.com/kb/HT1171

Time Capsule issue with backing up Windows partition via Boot Camp

I just bought the macbook pro and time capsule. I set up a 25GB Windows partition using Boot Camp and I have set up a Time Capsule to handle the backups. Time Capsule seems to backup the OSX hard drive partition fine, with the historical versions of the drive displayed correctly. However, with the Windows partition the Time Capsule appears to be backing up any files that change, however there is no version control showing up in Time Machine. In other words, I ONLY see the Windows partitioned drive as backed up in the "Today (Now)" screen. Any historical dates the drive shows up shaded and I cannot access it. Is there a way for Time Machine to manage the Windows partition in the same way as it does for MAC OSX drives?
John

Why is it so hard?
1000 and 1 times: the drive must have FREE contiguous unfragmented space and some files are blocking and preventing.
Some are able to find and delete, some by booting from another hard drive or OS X DVD to repair and/or run iDefrag.
Or.... backup; erase; and restore.
ie, CLONE your hard drive in both directions. My choice would be SuperDuper or Carbon Copy Cloner. They tend to work. Defrag tends to be slow and if there is no backup and there is an error.... well, you'll find out.
Apple error message is badly and poorly worded. Said so for over 3 yrs and it has not changed or improved though.
Paragon CampTune 9.5 $19 is great for Boot Camp. And resizing. And Windows 7 may need 2 or 3x what the base minimums listed. 32-48GB at least to be safe. And those are conservative numbers.

Windows 7 on Boot Camp with regular Leopard (10.5.8)?

Similar Messages

Maybe you are looking for