Windows 7 on dial-up won't play audio files

My brand new Compaq Presario CQ5320F running Windows 7 (64 bit) connecting to the internet with dial-up will not play many archived audio shows I like to listen to. Different sites have different set ups. The only sites that play properly have a STREAM button. Other sites just have a link to click. Some of these will only play after the whole show has 'downloaded' which does not work for me (I need to listen to the beginning of the show to know if I even want to hear it). Others sites with a link to click never seem to get connected as 'connecting' keeps displaying and nothing ever happens (even if I wait forever). This is all using Windows Media Player that came with the computer. On my old computer running ME I often went to the properties tab of an audio link and then pasted this in the media player. I decided to try this with my new computer but I can not find a place to put a URL address in this new version of WMP. Plus I am unable to fast forward a show with this new version (which I currently am inclined to think s....ks). Since I am using dial-up would I be better off removing this new version and replacing it with an old one, or is there some way to get it to work?

So the Bootcamp 4.0 drivers won't work with my 2008 iMac? I'm running 3.3 then, and the problem persists.
I've just tried uninstalling the RealTek drivers; Windows seems to auto-install a "High Definition Audio Device" that DOES play sounds through the headphones... albeit incredibly quietly. Barely perceptible at full volume. I've tried to install the Cirrus drivers from the 4.0 Bootcamp disk; they claim to install correctly (in less than a second, which makes me skeptical), but they still don't appear.
It seems I can have Realtek and no headphones, or no Realtek and minimal sound...

Similar Messages

IOS 6.0.1 Safari won't play audio files. Error: "Cannot play audio file."

I recently updated my iPad to iOS 6.0.1, now Safari won't play audio files in any format. Error: "Cannot play audio file." Previously, it worked fine. I tried downloading and using GoogleChrome and Opera Mini, and these also won't play audio. What's up??

Solved the problem. It seems that once iOS 6.0.1 installed, it caused all of my browsers to mishandle audio files. When I reset the iPad, that cleared up the problem.
Before upgrading to iOS 6, my browsers would "autoplay" the sound files. After iOS 6, "autoplay" is disabled so you have to manually click play to play them.
Nonetheless, everything is working fine again except for "autoplay," which I can live with.

QT V7.1.3 won't play audio file

Newbie asks the following question. Why do I receive an error message (#xx invalid URL) when attempting to open a valid URL (http://www.broadcastmonsters.com/webscore/wmcw/harvard/webscore111106.asx)? WMP V10 and RealPlayer V10.5 both play this audio file correctly without any difficulties.

That's a Windows Media format stream. QuickTime for Windows cannot play Windows Media (QuickTime for Mac does only with a third-party codec).

Updated from xp to windows 7 and iTunes won't play music

I have recently updated my computer from windows XP to windows 7, and I backed everything up on a flashdrive. I reinstalled all of my documents from the flashdrive using Window's easy transfer. I then downloaded the new iTunes. After it was done transfering the songs and I went to play a song, it would not play. I then closed iTunes and re-opened it, when a sign pops up that reads "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I don't understand what is going on because iTunes has every song I had from when I had windows XP but it won't play them. If you know how to fix this or what is going on I would greatly appreciate it.
Thanks.

If you mean computers that are authorised (iOS devices aren't authorised/deauthorised) then you can't see a list of which computers are authorised, you can only see how many : http://support.apple.com/kb/HT1420
For devices/computers that are associated to your account you can see a list of them, and if it's been more than 90 days since a computer/device was associated remove the association, by logging into your account via the Store > View Account menu option on your computer's iTunes : http://support.apple.com/kb/HT4627

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Flash won't play audio. Please help!

To anyone who can help,
Flash won't play audio in Firefox, Chrome, Safari etc. Downloaded audio plays just fine but I can't stream any flash audio content. Does anybody have any solutions? Any help would be appreciated.
Regards,
Ben

I'm experiencing the same problem on Snow Leopard 10.6.8. If I go to YouTube, I don't get audio. Other websites are fine (I'm not seeing a pattern on exactly which sites). What I had to do was uninstall Adobe Flash (I used the Adobe Uninstall utility). Now I have audio on YouTube, but now I'm getting a lot of 'missing plugin' messages from other websites. I've opened
To asiatic43, you can get the latest Adobe Flash at
http://get.adobe.com/flashplayer/

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

Playing Audio Files in the Finder-any tips?

Something I've been meaning to ask for ages... and hopefully an easy one to answer!
When playing audio files in the Finder (in 10.5.8), it's really annoying when the file stops playing when you click on another window or application (or even just the Desktop). Is there any way around this?
Someone recommended Snapper, but it's the same story - file stops playing when you click on any other area. Is this problem confined to Leopard (ie. has it been fixed in Snow Leopard?) - never used to be like this in Tiger.
Some of us like to multi-task when listening to audio. The only solution I can see is importing the file into itunes. Any other suggestions?

I assume you're talking about QuickLook?
That's not the Finder, that's QuickLook.
QuickLook is a function that can only work with the foremost selected item, and that makes sense, as you can, for example, QL a PDF within Mail.app, as well.
Why not just use column view (doesn't everybody?) and play it in the Preview pane at the right?
It will keep playing until you close the window or select another object within it.
I use QuickLook when I want to give an audio file a quick once-over - skip here and there, but for actually playing it through, I use the column view preview.
Message was edited by: spheric

The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files?

The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files from websites?

You have a <b>general.useragent.override</b> pref that identifies you as Firefox/3.5.7
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Play audio files in Bridge CS6

Hi,
I used to be able to play audio files created with my Mk4 right in the preview window in CS4 which was easy for renaming files after their description was recorded when taking the shot.
Does anyone know how I can do this in CS 6 - there are no play/pause controls under the preview like there was in CS4.
Thanks Heaps for any help.

Hi ,
yes , MK4 and .wav files
I have Mac 10.7.5 & Bridge CS6
I have selected "Play audio files automaticly when selected" in the preferences but it doesnt do it.
In previous versions of bridge you could get a play and pause buttons below the .wav icon view in the preview
but this doesnt happen.
It is really inconveinent as it defeats the purpose of having the .wav file and the I have to go back to Bridge CS4 to play the files.
Thanks

QT won't play .mov files any more

After a complete system re-install, QT player won't play .mov files any more. It tells me, some components were missing. Hey, this is its own file format!
MPG files run OK.
Thanks a lot for a good idea!
Peter

What format are the videos that don't play.
WMV...Windowa Mwdi Videos you'll need the flip4mac component. Free trail:
http://www.telestream.net/flip4mac-wmv/overview.htm
Other codecs, Perian and it's free:
http://perian.org/
Flash videos like the one on youTube. Adobe Flash comonent and it's free.
http://get.adobe.com/flashplayer/?promoid=DXLUJ
You should download all three and install. Remember to rebuild your Permission after install any or all of the above.

TS1717 I can play audio files in iTunes but I can't play downloaded tv shows or movies. Everytime I attempt to play them, iTunes stops working and closes.

I can play audio files in iTunes but I can't play downloaded tv shows or movies. Everytime I try to play them, iTunes stops working and closes. Any information will help.

Is QuickTime installed? If not it might help to install it.
If so is Direct3D Video Acceleration enabled? If so it might help to disable.
tt2

Playing audio file while Downloading

Hello all,
Can anyone give me an idea on how can I play audio file while downloading.
Thanks

Connect the external drive and then launch Disk Utility found in Applications/Utilities. Your external drive while show up in Disk Utility's side bar. It should be Mac OS Extended or OS Extended (Journaled).
If it isn't:
Then select it and click the 'Erase tab' at the top.
Select Mac OS Extended-Journaled formatting from the Volume Format menu.
Then click the oval Erase button at the lower right. Just remember-this will erase the drive!
http://danslagle.com/mac/iMovie/usage/5006.shtml
Sue

Can anybody explain me how to sample and play audio files with logic's EXS2

can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
i cant find a way to upload and manage my own audio content on this sampler...

i uderstand , thanx...
i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
Thanx

Front Row won't play .mp4 files

I just recently started using Front Row and, for some reason, it won't play .mp4 files. The said files are in my Movie folder and show up in Front Row's "Movies" menu, but when I try to play them it says "Selected video could not be played, format was not recognized."
Please help!!

iTunes only supports MP4s encoded using the Main Profile, but many MP4s that you can download from the web are encoded using High Profile. These need to be converted.
You can use an app like VideoSpec or MediaInfo to list the encoding characteristics of your MP4s.

Windows 7 on dial-up won't play audio files

Similar Messages

Maybe you are looking for