Windows 7 on Satellite P10-554, need Drivers

Hello,
i installed on my Satellite P10-554 a new Windows 7.
Now i can't find some Drivers for my device, in the special for the USB device,
which breaks off, if i use a external harddrive.
Additionally i got a error code 28 for the base systemdevice (at PCI-bus 2) and
the "Windows 7 Upgrade Advisor" shows, that the driver for ACPI/CMP0101 isnt
compatibly with W7.
What can I still do?
thank you for answer

Hallo Lupi
I had Satellite P10 in year 2003. So please don't understand me wrong but you have 6 years old notebook, designed for WXP and now you wondering you cannot find Win7 drivers.
What you can do? Nothing. This oldie will not be supported for Win7.
Use supported operating system and be happy. If you want to use newest software I believe it is time for newest hardware. ;)
By the way, Satellite P10 is really nice and absolutely reliable notebook.

Similar Messages

  • Satellite P10-554 shuts down after few minutes and I can not reboot

    hello,
    i hope anybody can help me with my satellite P10-554
    when i start the notebook everything works fine a few minutes. than the monitor turns into black and the notebooks shuts down suddenly. i cannot reboot it, when i push the start-button nothing happens.
    i have to wait for about an hour and then i can start it up again, but he works just a minute and shuts down again !
    help me please, cause i need my notebook to work !

    I did that many times. First you need a special torx-screwdriver. Then you can remove the cover over the fans. Than take your vacuum-cleaner and remove the dust. Take a brush or somethin else to remove the dust from the fans. Then, you need to remove I think 2 big screws, now you should hold the cooling falance in your hands, the one with the fans. Clean that properly.
    After that you can remove the copper-cooler, with 2 more screws I think, but it is pretty obviously. Now you should see the blank cpu with lots of heat-paste on it. I dont know why they put so much of this stuff on it from toshiba. So get a better one like Arctic-Silver or sth. My advice is to take the CPU off (one screw on top as far as I remember) and clean the surface.
    The copper you can clean under water, but dont use sth that could scratch the surface. After that let it dry good. Now just put the CPU back and fix it with the screw again. Take a !litte! heat paste and put it properly with a paper all over the surface of the CPU, but remember, just a little! Then follow all steps back, dont forget to clean the graphics-chip as well and put some paste on it. You can see which it is when you look under the fan-cooling-falance, there should be a rest of heat-paste. Everything back to its place and voil*, a nice, cool clean notebook. By the way, I replaced even the fans.
    If you need further advice, just ask!

  • Satellite A300D-126 - Need drivers for Windows 7

    Hello everyone.
    We have two problems with two drivers so:
    Display driver 8.634.1 - don't work zoom settings. New Catalyst 9.11 does not help me.
    Sound Driver 4.98.6.61 - failed instaled.
    I installed display driver for Vista and sound for XP but I think I need an update because videocard with this 8.452.2-080130a-059298C driver working so slowly .
    What to do ?
    Thanks in advance

    Hi mate,
    First of all you cant use Windows XP drivers on Windows 7. This will not work.
    You wrote about different drivers for Vista and XP Ok, the most Vista drivers are also work on Windows 7 but Satellite A300D is Windows 7 supported. That means you can already get Windows 7 drivers on the Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Check this!

  • I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

    i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • Satellite P10-554 turns off, cant start again, but led lights still burning

    my P10-554 shuts down after few minutes. after that, i cannot start it again, but the led lights are still burning. when i wait a few minutes or hours, then i can reboot my notebook again, but he runs for about one or two minutes and then shuts himself down again...
    i thought of a problem with the fan or something like that, but why are the led lights still burning after the shutdown ? what can i do ?

    Usually if the AC adaptor is connected to the PC some LED are on. For example the battery LED lights green when its fully charged.
    However, its not usual that the notebook shuts down after several minutes of running and for me it sound definitely like a hardware fault.
    The problem is that a common user like me and you is mostly not able to fix or locate the malfunction. You need definitely a help from a technician with much more experience.
    The ASP guys could run the diagnostic tests and are able to find out whats wrong on the board.

  • Can BIOS update enable usage of 2GB DDR RAM modules on Satellite P10-554?

    Hello,
    I got a Satelite p10-554 and want to upgrad my RAM.
    I know by default the max u can install is two 1GB Kits.
    Is there any Bios-Update, that enables 2GB kits???
    Thanx a lot!
    Ron

    Hello Ron
    The same situation with my P20! Unfortunately there is no BIOS update to allows more RAM usage.

  • Satellite A200-1M8 - Need drivers for Windows 7

    I have a problem with finding drivers for my computer for Windows 7.
    I've looked at Windows7 beta drivers but there are 3 different numbers and I don't know what to chose
    -A200-ST2041
    -A200-ST2042
    -A200-ST2043
    I would like to know if it would be better to instal Windows 7 x64 or x86?
    tnx for the answers

    Hi
    The beta drivers on the Toshiba US page are designed for the US models and so you cant find your A200-1M8. I think it makes no difference what model you choose. Just try it! ;)
    Furthermore its your choice if you install Windows 7 x64 or x86. Some older applications maybe not run properly on 64bit OS. So its depending on the applications that you run.
    But I will buy Windows 7 64bit because I have an old system with Windows XP where I can run my older applications.

  • Satellite A200 (PSAE6) - need drivers for FN functional keys

    please give me a link for this driver.j have windows 7 x32 bits on my laptop a20 psae6...a reinstal operative sistem,and again instal driver and doesn t work....my sensor is not working ...

    Hi
    You need to download the VAP (value added package) and Flash Card Support Utility.
    Both tools are needed to get the FN buttons working in Win 7!
    Ive got A210. Its a similar notebook series and Ive chosen the drivers which are released for Satellite L500 series.
    Both tools worked for my A210

  • Re: Satellite A200 (PSAE6) - need drivers for FN functional keys

    j have toshiba a200 psae6 and j want drivers for functional keys f1 ....f12 ,and drivers for finger sensor...yesterday j reinstal my laptop,and now j have problem with this drivers...j download fingersensor from support page but doesnt work..windows 7 x 32 is on my comp...sorry for my bad english...

    Hi
    What Windows OS do you use?
    If you use Win XP then you need to install Common Modules.
    If you are using Win 7 or Vista then you have to installed VAP (value added package) firstly and then Flash Card Support Utility!

  • 15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit: need drivers

    Hp Pavilion 15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit.
    Stopped:
    Internet driver
    Wireless
    USB controller
    Network Controller
    PCI Device
    PCI simple communications controller
    SM bus controller
    maybe other stuff I haven't noticed?
    I see others on this forum have had similar problems going back to windows 7. I tried some of their driver solutions that were posted, but to no avail. Can I get some help? Maybe some links to where I can find drivers to help me? Windows update cannot find and automatically install replacement drivers.

    Hi:
    Looking at the hardware specs for your model you should be able to use all of the W7 x64 drivers and software from the HP Probook 450 G2 on your model except the BIOS and firmware files.
    Your model uses the Intel HD graphics driver and the Realtek RTL8188EE wireless card driver.
    http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4058

  • Satellite P10-554 and pinnacle studio 10 problem

    When i start using pinnacle studio 10 I get message that I need newer version of display driver. I am using 4.4.8.5. an d cant find later one for my display adapter.
    I am using nvidia geforce fx go5600.

    Hi
    Did you look on the Toshiba drivers download page or new version of graphic driver?
    Generally you should always use the Toshiba graphic driver because it has a own protect function because of graphic overheating issue.
    But you can try to use the driver from Nvidia at YOU OWN RISK.
    The other drivers could damage the graphic card!!!
    Bye

  • Reformat vista to windows xp on Satellite P200 - i need controllerdriver

    Its possible install in Windows XP SP2? What is a procedure to start this installation? I ve found a problem with driver controller when i ve started with windows xp installation......
    I ve big trouble with Vista. My applications are "certified for Vista" but send in crash blue screen this stupid operating system :-(((((((
    I dont want work with Microsoft for free to resolve their problems... pack problems? :-)
    This a last time to fall in MS world....
    Next time i buy a mac. If i must restart from zero is sure restart very well in a paradise.
    Help me please.........

    > Ive found a problem with driver controller when Ive started with windows xp installation......
    I dont know what problem you have found but Im sure that this is not a real problem but simply unknown user ;)
    I think you have to install the Intel Matrix Storage manager if you want to install an OS.
    During the XP setup procedure you have to press F6 to install this iMSM from external USB FDD.
    If you dont have the external FDD drive you can include the iMSM using the software called nLite, Its for free and very nice ;)

  • Satellite P10-554 nvidia geforce fx go5600 driver update

    Hi all,
    I just tried to update to very last nvidia driver version 78.01. Running the setup I got an error message indicating that the setup routine couldn't find a driver that is compatible with the hardware installed. According to the doc the new update supports the harware installed.
    Does someone why I can't update to most recent version?
    Thanks in advance
    Karl
    BTW: I already uninstalled the current driver, rebooted the machine and tried to install the new version without success.

    Hi Juan, hi R2D2
    thanks for your answers. I found the driver on the german site as well as on the english one:
    http://www.nvidia.de/object/winxp_2k_78.01_de.html
    http://www.nvidia.co.uk/object/winxp_2k_78.01.html
    If you follow the link "Products Supported" on this page a list of the supported products is being displayed (I just noticed that the card supported is GeForce FX 5600 and not GeForce FX Go5600). May that's the reason.
    The last driver on the Toshiba site is 4.4.8.5.
    Since weeks I'm trying to pinpoint a problem that the turns off due to the settings of the power management. But I can't reactivate the display when moving the mouse or pressing the keyboard. So I try to find out if it's a software or a hardware issue, but without success so far.
    Best regards
    Karl

  • How to install Windows XP in Satellite A210-14s - Need step by step info

    I'm not an expert about OS-Installation. I have heard from many people how complicated to install WXP in Vista Notebook. Is there any document, how to do it step by step? What should I do first? My labtop will work 100% after I install WXP? What I have ist an installation CD of WXP with SP2.
    Can anyone explain me exactly? Thanks!!

    well if you want replace your vista i recomend not to do it if you not pretty good and comfortable with os instaling because winxp installation is nothing hard the crazy hard part is setup all the hardware to work properly ...
    i have A210-16f (can be purchased only in czech or slovak republic.) and i install the winxp a month ago and i still have problems FN keys still not working , touch pad is working onli halfway ( meaning it only points and move the cursor but all the other funcions of it still in dark)
    soooo i recomend read this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26818 its how i did it.
    my apologies for my english writing and spelling hope you did understand all above.
    zero

  • Satellite P10 - trouble with grafic adapter

    Hi,
    When starting my Satellite P10 - 554 today, the display showed unsorted colored pixels all around the screen. The BIOS message appears fully normal. After booting into the graphical mode, starting windows XP, the screen keeps being black.
    The hard disk works fine. I've checked the display. It's working fine.
    I guess the graphic adapter (geforce go 5600) is damaged. Any chance getting my notebook fixed? Do I need a new mainboard, or is there any possibility replacing the graphic adapter? Where can I get the needed parts, used or unused? What do the "exchange parts" cost? Better buy a new notebook?
    Thanks a lot for your help.
    Steven from Germany, Duisburg.

    Hi
    >Any chance getting my notebook fixed? Do I need a new main board, or is there any possibility replacing the graphic adapter? Where can I get the needed parts, used or unused? What do the "exchange parts" cost? Better buy a new notebook?
    Are you 100% sure that the graphic card is dead? This can be checked very easily.
    You could connect the external monitor to the notebook and could check if the same appears on the external monitor too. If the same fault would appear on the external monitor then the GPU could be really faulty.
    In such case the whole motherboard must be changed and such procedure costs a little fortune because the motherboard is on of the expansive notebook parts. You should calculate 300-350 euro
    So maybe an second hand board could be a alternative.
    greetings

Maybe you are looking for

  • UC560 loopback network unreachable

    Hello, I got problem with imported CDR on a ftp server. It brings me an error message which is talking about the loopback network unreachable.

  • How do you play an album in the correct order?

    Just bought an ATV. 160GB model, software version 2.3. I've synched it to my MacBook's iTunes library, and it plays music fine. However, I can't find a way to simply play an album in the correct sequence. If I navigate to an album and open, the only

  • Does imovie support .m2ts?

    Will iMovie import .m2ts video and can I edit it? If I can't, will quicktime pro be able to convert it to .mov or another file type?

  • How can I get a reference to all controls on a front panel of one type )for example of the type Text Ring?

    I'd like to set the strings[] property of all the Text Ring controls on a front panel at once without creating a property node for every text ring. How can i do that?

  • Import jama.* ????????

    Hiiii!! I need anyones help who could tell me what does import jama.* do?? i found this code that might help me in my project. The problem is i cant run the program bcoz it gives me an error : package Jama does not exist import Jama.*; what should i