Windows 7 on Thinkcentre 8212 - no Sound! driver problem?

Hello everybody, we recently upgraded 6 open net Lenovo 8212 workstations in our office with Windows 7, and the Problem is that the Sound does not work. I tried to find sound drivers for the 8212 series on the internet, but with the two I found I had no success. Does anybody have a similar problem? The problem is that it doesn't even work in XP Mode, it is still the same problem. Help much appreciated!

Hello everybody, we recently upgraded 6 open net Lenovo 8212 workstations in our office with Windows 7, and the Problem is that the Sound does not work. I tried to find sound drivers for the 8212 series on the internet, but with the two I found I had no success. Does anybody have a similar problem? The problem is that it doesn't even work in XP Mode, it is still the same problem. Help much appreciated!

Similar Messages

  • Cirrus Logic CS4206A Sound Driver Problem in Windows 7

    Hi All
    I am having a problem with our Imacs. When we first installed windows 7 on our macs we found that we had no sound on the windows side and i figured out that the wrong drivers where installed so i have got the right driver off the MAC OS disk and i have installed the sound driver manually on our macs.
    This originally fixed the problem but not every so often the sound driver breaks and we have no sound on the windows side. When i diagnose the sound driver is says there is a fix for this please apply this fix. I apply this fix and surprise sound comes back but this keeps on happening and is rather annoying.
    Has anyone had this before and if so has anyone found a fix .
    Thanks
    Scott

    64-bit Windows requires 64-bit drivers.
    You will have to contact Vivitar for assistance with your problem.  Vivitar has sole responsibility for support of their products.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • K7T Turbo2 Sound Driver Problem

    I just installed a K7T Turbo2 motherboard for my #2 system and am having a problem installing the VIA sound driver.  The system freezes up before it finishes the installation and once I reboot the Device Manager says that since Windows stopped responding when trying to start the device, it wouldn't attempt to start it again.
    I've tried new drivers (both sound and chipset), tried reinstalling the drivers a few times, made sure the sound card was active in the BIOS, and even removed a couple of extra spacers from under the mobo so I just have them on the four corners.  Any other suggestions?
    Thanks,
    z-man  
    Windows ME
    MSI K7T Turbo2 (ver 5.0)
    AMD Athlon 1100
    256MB PC133 Corsair
    Elsa Erazor-X

    I think during the course of trying to get it to work, it requested the gm16.dls file.  However, I think I finally got it installed from the Windows disk.  Could this still be causing the problem?
    Also, I tried out my SB Live! card from my primary system - the drivers installed and the card worked fine.  I would prefer not to have to buy a seperate sound card, if I can get the on-board one working.  
    Thanks again,
    z-man

  • Sound driver problems

    I recently installed Windows 10 build 9841 on my Dell Inspiron 3531 from an old bootable USB I had lying around from last October or so. The OS and a few updates installed without issue, but this morning, strange things started happening. The computer was
    in sleep mode. For some reason, and without my consent or approval, the computer turned on by itself and began installing a new OS (which I would later discover to be Build 9926). To my pleasant surprise, there are many improvements. However, my audio is now
    completely down. I checked the sound drivers, and everything looks fine. I even tried a Realtek 6.0 driver, which gave me error code 18 upon restart and did nothing. I did, however, notice a few small clues in the Events and Driver Details tabs of the
    properties of my sound driver. Under "Information" in "Intel(R) Display Audio Properties," there are some events titled "Device Install Requested," "Driver Service Added (IntcDAud)" and "Device installed (intcaud.inf)."
    Under "Device install requested," I found this:
    Device HDAUDIO\FUNC_01&VEN_8086&DEV_2882&SUBSYS_80860101&REV_1000\4&70377b6&0&0201 requires further installation.
    However, I do not see how this could be the problem, as the exact same sequence and text appear in the original install six days prior, and my sound worked then.
     Also, under the Device Manager tab "Other Devices," I found another listing of my sound driver with error code 28. The entry is entitled "Audio Device on High Definition Audio Bus." The error says:
    "The drivers for this device are not installed. (Code 28)
    This operation returned because the timeout period expired.
    To find a driver for this device, click Update Driver."
     Please help, I want my sound back!!

    TPB
    There is a known problem with the realtek driver (among others).  Realtek is working on it but there is no ETA for a fix.  Here is what they say
    Speaking of that big Realtek
    driver package, I’m sure you’ve seen the issue with it failing to install with a 0x800705b4 timeout error. We’re still working on a solution for that one
    Wanikiya and Dyami--Team Zigzag

  • Windows 7 - HP Laserjet 8500 print driver problem

    I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
    I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
    I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
    I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
    Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
    The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network.  The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS. 
    Can anyone please help me correct this problem?

    Hi, 
    Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
    From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7.  On the machines affected, try the procedure below to see if it helps at all
    Next download revo uninstaller on the link below and install it.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect the printer from the PC.
    Run Revo and see if it finds any  HP Printer Software installed.  If it does, right click the software icon and select uninstall.  During the process you may be asked to delete registry entries.  If you are, just select all and click delete.  Do the same for any left over files and folders.  Once completed, reboot the PC.
    Re-connect your printer to the PC and follow the guide below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    If this helps you will need to repeat the process on each of the affected machines.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound Driver Problem on Pavilion g6-1215sv

    Hi Everyone!
    I am using Windows 7 on my Pavilion g6-1215sv Laptop. Yesterday I have downloaded Sound driver from this site and after installing, the sound volume is better BUT all sounds for Skype are gone, no one can hear me and I can not hear them, also no notification sounds, etc... It happens just for Skype.
    Can anyone help in this?
    Thanks.
    This question was solved.
    View Solution.

    Hi,
    check skype's audio setting if are selected right driver
    Knowledge is power, sharing knowledge is powerful!
    HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

  • Windows 8 on mbp 2011 sound driver failed

    everything looks good except the sound driver.
    the Windows Support was downloaded from the OSX's bootcamp assistant.
    seeking for solutions.
    thanks.

    download; and installed. But lack of audio is almost normal w/o installing audio device driver afterwards.
    AUDIO FIX
    I experienced zero audio output from my iMac's speakers with limited output using headphones.
    Insert the installer disc for Snow Leopard while in Windows
    Open the "Bootcamp" folder
    Open the "Drivers" folder
    Open the "Cirrus" folder
    Double click and install the "CirrusAudioVista64" driver (or what is applicable to your system)
    Restart your computer
    If these steps don't work, uninstall the current driver by going to your Device Manager in Control Panel.
    Intel Windows 8 Graphic Driver
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&ProdId=3498
    Intel Download Center: http://downloadcenter.intel.com/
    3rd Generation Intel HD Graphics 4000 Windows 8 64-bit
    MacBook Pro Cirrus Logic Audio device driver
    http://www.lonare.com/topic/230/macbook-pro-no-sound-in-windows-7-solved/
    Windows 8 and Boot Camp Control Panel - when trying to launch the "Boot Camp Control Panel", but I just stumpled upon a solution. I created a new Windows user, that was not Administrator. When I logged in Boot Camp updateded something and asked me to restart the computer. After restarting and logging in with my new user, I could start the "Boot Camp Control Panel" configure tap to click and use F1-F12 as function keys. Then I changed the new account to Administrator and now the control panel can not be startet again... but my settings remained... only on the new user only though. ---------
    To make the trackpad work. You need to install trackpad++
    (http://www.techspot.com/downloads/4967-trackpad-control-module.html), it will enable the trackpad driver on boot camp. After you install the trackpad++, trackpad++ will complain something. ingnore it.  You should be able to enable trackpad. And you can now even uninstall the  trackpad++, the trackpad will sill work. 
    brightness, what graphics card are you using? It might be due to the auto adjusting brightness running there. You can go to your power options, edit the one you are using  (Change plan settings >> Change advanced power settings) and look for Batteries >> Enable adaptive brightness and disable the one you are using. After that, the scrollbar for adjusting brightness in power options should work again.
    There are more but those are most common. You don't have Intel 3000/4000 graphics though.

  • Toshiba satellite A 100 sound driver problem

    Hi,
    I have recently downgraded OS to XP sp3 on my Toshiba satellite A100 notebook, which originally had vista. I am having problems regarding sound drivers. When I install  them (tried ones on toshiba website)..it posts a warning saying " this driver does not meet logo requirements for windows xp" in case I continue anyways...it does not start the sound on the system.
    Please help!
    Thanks.
    Shaunak

    Which Satellite A100?
    The product number looks something like PSAARE-03G00JEN.
    -Jerry

  • HP Laserjet CP2025 Windows Server 2008 R2 Universal Printer Driver problem

    Is there support for Windows Server 2008 R2 for the CP2025n printer,  I've been trying to get it to work with a standard TCP port with the universal driver but no luck.
    Any ideas?

    I have Windows 2003 servers with the Universal PCL6 driver v5,4.  It printed slower then the previous version.  I manually changed the Device Settings, mainly the Monochrome / Color option.  This seemed to make the print process faster.

  • Windows Media Player 9 - no sound, codec problem

    I am trying to play the news stream from the BBC News site in the UK and when I try, I get a warning that there will be a problem as it was compressed using an unsupported codec. I get the same message when trying to play "normal" wmv files. The video plays fine but there is no sound.
    Anyone had the same problem or can resolve the issue ?

    John sometimes a file will change your audio output. This will manifest itself in having no audio in certain applications. Try this navigate from Applications->Utilities->Audio MIDI Setup-> open it up and in the lower right hand corner you should see Audio Output from there you should see a source that should read Internal speakers (if that's what you're using) and Format which should be set at 44100.0 Hz
    Or an easier way is just open Garage Band (which will automatically set the proper output frequency).
    As far as some of the files not playing correctly or not at all on WMP9 you can try VLC which is superior in most cases but if the files were made for WMP10 you just out of luck. They uses a copy protection scheme that's only available on WMP10 which unfortunately isn't available on the Mac yet and there's no alternative.

  • Sound driver problems with 975x V.2

    Ok, my setup is
    C2D E6400
    Corsair XMS2 6400 C4
    Freezer 7 Pro (Arctic Silver) sitting at 32C now
    975x v 2.1
    Nvidia 7600 GS (went cheap awaiting DX10 cards)
    80 GB sata 2 HD. primary
    300 GB sata 2 HD.  backup
    Ultra Xfinity 500 PSU
    Samsung DL DVD burner
    2 120 mm case fans = 4 120mm fans total...hahaha! (freakin loud without speedfan going)
    WinXP Pro 64
    When I try installing the Realtek sound drivers, I get an error message saying I need the file wksproxy.ax on my winxp CD. I'm stumped. It actually installed most of the drivers, except the "audio device on high definition audio bus"
    I was thinking of getting this card http://www.newegg.com/Product/Product.asp?Item=N82E16829111002. I hear for 25 bucks (after rebate) it is a steal for a DDL sound card. 
    I am wondering though how much help it would be for gaming.
    Thanks for any help!!!!

    this is the link : http://downloadcenter.intel.com/scripts-df-external/Detail_Desc.aspx?agr=N&DwnldId=12150&lang=eng

  • Sound driver problem

    hi all, I have PE845Max with REALTEC650 onboard (I connect 6 speakers), so when I test rear speakers they play together with front. It is correct? It is possible to make "Bass redirection" to sub?

    You should try out the latest audio drivers.

  • Tecra S11-15T asks to install always sound driver

    Good day all
    My Toshiba laptop S11-15T has a sound driver problem, every time I restart my laptop in want me to install a
    Microsoft UAA bus driver high defection audio driver.
    I've tried re-installing the sound drivers but it doesn't do the trick.
    Please assist...

    Hi
    What Windows OS do you use?
    Is it Win XP?
    As far as I know the Win XP SP3 contains the Microsoft UAA bus driver high defection audio driver and some patches and fixes.
    If you use this system, I recommend installing all patches and service packs firstly.
    Then you should uninstall the sound driver and after new reboot install the driver which you could download from the Toshiba page.

  • Sound driver crupt..

    sound driver problem plz do need full

    Hi,
    Can you post back with the following details.
    1. The full Model No. and Product No. of your dv6 series series notebook - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information.
    2. The version of the operating system ( ie Windows 8 64bit ).
    Regards,
    DP-K

  • Graphic driver problems ?

    Hello to all you courageous out there. Ready to read this ?
    Here's my little story of my problem:
    One year ago I bought a superb macbook pro 15" (early 2008), unfortunately I quickly noticed some problem with the display.
    This is how what it looked like (activate the HQ mode to better see the problem):
    http://www.youtube.com/watch?v=s-0dCONX6FY
    http://www.youtube.com/watch?v=tsak8n_P6ZY
    Description : vertical objects are torn apart when panning horizontally
    The symptoms appears right after start up, even when the mac is not warmed up yet. It happens during internet navigation when scrolling horizontally, also during youtube videos (or flash files), and all application using accelerated hardware. Graphic performance is not affected, but the results is ugly and realism takes a hit.
    I have tried the following :
    Clean install of leopard
    Reset PRAM
    Apple hardware test
    Updated to 10.5.6
    The problem is missing on my iMac (ATI Radeon 2400HD) or on Windows PCs : the display is clean.
    I posted this issue in different forums and I received two interesting answers :
    - My problem could be linked to the famous problem of faulty nvidia chips (Geforce 8600m GT)
    - A developer of Aspyr told me that it could be a serious problem of vertical synchronization, probably du to not optimized drivers
    Indeed, it's look like a strong tearing effect. Normally, the "vsync" option in games solves these types of problems, but it consumes a lot of FPS and this option is not available on OS X, or doesn't works with most games (DOOM 3 engine, Quake IV, Colin Mcrae Rally, UT2004 etc...). To have small problem of synchronization with frames is normal, but in my case, the magnitude is abnormally high.
    I decided finally to go see a service center and presented my problem to a technician, who agreed to my problem. He thought that I had a faulty video memory and change the mother board. But the problem continued. He then changed the screen and the hard disk without success.
    The technician then contacted Apple, and sent them a video of the problem.
    After 4 weeks I'v got my mac back and was told that Apple will contact me directly and that the issue will be solved with a future update of OS X.
    Apple remained vague about the solution and didn't contact me directly. I'm for sure not the only one who has this issue but so far I have not read anything about it on the internet. In view of the hight cost of a macbook pro, I would expect a clean display.
    Any ideas ?

    Hi,
    Unfortunaly, Mac OS 10.5.7 update didn't solve the problem. I decided to install windows to see it's a driver problem.
    I have exactly the same problem on :
    - Windows Xp 32 bit
    - Windows Vista 64 bit
    - Windows 7 RC 64 bit
    It was tested with Apple nvidia drivers (BC 2.1) and nvidia updated drivers (from nvidia website).
    Here how it look likes (enable HQ !) :
    http://www.youtube.com/watch?v=qfVgcu3TMks (doom 3 demo under Mac or PC)
    http://www.youtube.com/watch?v=XmlKNg79nQM (Mac OS)
    I haven't this screen tearing on my windows PC or on my iMac (ATI).
    I'v tested the graphic memory of my 8600M GT and no errors were detected and the graphic card performance seems fine (7800 pts with 3Dmark benchmar 05).
    Same problem with an external screen.
    Is this normal ? if it's not the drivers, graphic card, or the screen, what can it be ?
    Best regards,

Maybe you are looking for