Windows 7 only loading partial iCloud contents

My computer, running Windows 7, will only show 32/522 photos from my photo stream. How can I get every photo to load to my computer? I have tried logging out through the control panel, then restarting and logging back in and it still shows the same 32 pictures and will not load more.

Go to my computer and look for the DVD drive letter and verify that you can see the disk there. Then right click on the DVD drive, choose explore, then you want to look for the .exe file (you may have to open a folder? can't remember). when you find the .exe file you want to right click on it and choose run as administrator. Ensure you are hooked up to the internet and also turn off any anti-virus software.
Make sure, after the install, that before you run the software itself, to right click on the CS2 .exe and run that as administrator. Also don't forget to update the software and ensure you video card drivers are up to date too.

Similar Messages

  • Files only load partially

    In PS CS6 (trial version for windows - I use windows 7) ordinary photo files only load partially. Huge pixel blocks seem te be absent. Only after a second attempt they load as should be.
    My hardware is rather up to date (6 GB work memory); I 've never had this problem in CS 5.

    Thanks for reacting, but I don't think that's the problem, according to this message:
    Product
    Current
    Installed Driver
    Latest Driver
    Update
    GeForce GT 320
    301.42
    Your PC currently has the latest driver installed for your GPU.  No driver update is necessary at this time.

  • Only loads tab's content when i select it ?

    is there a way to make safari only load tab's content only when we select it as the active tab ? i think it is kind of bandwidth wise solution when we configured safari to reopen last active session when reoping safari, especially with lots of tabs open.
    ..similar to firefox's feature i guess..
    thanks in advance

    As it turns out I have the same question, but I don't read book on my iPhone 6 plus.  I ended up deleting all of the books listed that did not have the "download from the cloud" icon in the upper right hand corner.  This retained the book for future downloading from iCloud and got rid of the numbers in red in the "Purchases" tab.  Unfortunately I still have a red number 1 on my iPad.  I do all of my reading from my iPad.  I did try deleting some book I haven't read yet, but it didn't work on the iPad like the iPhone.  What ever!

  • My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. I've tried turning it on again more than 5 times and the same thing happens. Does anyone know how to fix this?

    My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. How do I get this fixed?

    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.
    OOW:  Please advise of which model iMac you have?
    http://support.apple.com/kb/HT1758 How to identify iMac models
    OS X Mavericks (10.9)
    If/when you get your problem resolved, you need to update your OS.

  • Only loading partial web site

    Recently, my mac will only load part of a web page or site. It seems like it is not staying connected long enough. What 's up? Nothing has changed here that I can tell. My wifi signal is weak but that has not been a problem until now.

    What Mac? What version of OS X? What browser?

  • Issue w movie only loading partially in certain Browser/Player Configurations

    I have a multi SWF movie that uses AS2 and is behaving differently in different browsers.
    The basic scenario is this . There is a root movie that acts as a control panel for user input.
    1. It loads then parses some xml to determine how the interface should look (what images, radio buttons, etc. to display)
    2. Then it loads and positions items on the stage ( rbs, thumbnails)
    3. It loads child swfs
    When the issue occurs step 2 is only partially completed and step 3 doesn't occur. No message about script error appears.
    I've been getting different reports from testers -
    Tester 1
    PC Plaver Version -  10.3
    1.       Firefox 8.0 on PC  - issue
    2.       Internet Explorer 8 PC  - no issue
    MAC Player Version
    3.       Safari Mac - issue
    Tester 2
    PC Player version -   10.3
    1.       Firefox 8.0 on PC  - no  issue
    2.       Internet Explorer 8 PC  - issue
    MAC Plaver Version - 11.1
    3.       Safari Mac - no issue
      4.     Chrome - no issue
    Tester 3
    Player version -   11,0,1,152
    1.       Firefox 8.0 on PC  - issue
    2.       Internet Explorer 8 PC  - issue but if tester uses browser back button and then returns to page issue is gone
    Tester 4
    Player version -   11,0,1,152
    1.       Firefox 8.0 on PC  - issue
    2.       Internet Explorer 8 PC  - issue but if tester uses browser back button and then returns to page issue is gone
    The only consistency seems to be IE and possibly the player version.
    Any help would be greatly appreciated !!
    Thanks ,
    Andy

    Thanks for the response  but I'm not sure that's the right track -
    I have more info then my when I made the original post
    I am thinking that it may be a Player issue.
    1. Testers using the same connections in different browsers are getting different results.
    2. I am Tester 2 from above. I am  testing from 2 machines that share the same connection. See corrected stats below.
    Tester 2 -inital settings
    PC Player version -   different player in each browser
    1.       Firefox 8.0 on PC   version 10 - no  issue
    2.       Internet Explorer 8 PC  - issue
    MAC Plaver Version - 11.1
    3.       Safari Mac - no issue
      4.     Chrome - no issue
    When I updated FF on the PC to Player version 11. I started getting the issue.
    4. The load seems to fail when the app tries to process radio button components ( It assigns values and x, y coords to them)
    When I remove the code that processes these the app runs
    Any thoughts ?

  • Location map: only loads partially. Where is the error ?

    When I load the location map, either for identifying a new location for my photos or just to view the locations, I only see a part of the map. I see most of Europe but not North Africa, the Middle East etc. I do see the dots marking the location but not the underlying map. I use an imac with OSX.
    Thanks for any help to fix this.

    Hi
    Could you plz place the Code in between and check :
    $$ begin of routine - insert your code only below this line -
    "Plz put the code here"
    *-- fill table "MONITOR" with values of structure "MONITOR_REC">
    *- to make monitor entries
    ... "to cancel the update process
    raise exception type CX_RSROUT_ABORT.
    ... "to skip a record
    raise exception type CX_RSROUT_SKIP_RECORD.
    ... "to clear target fields
    raise exception type CX_RSROUT_SKIP_VAL.
    Regards,
    Aparna

  • I am a novice so bear with me.  When I sync my touch it does not seem to download the songs onto the itouch since they are in the cloud?  Anyway it only loads partially and will only play if I have wi fi. help

    Bought a itouch and tried to sync, but the songs that I allowed to go into the cloud will not go onto the itouch.  I can only play them if there is wifi, which is a problem.
    What do I need to do - I am a novice.

    Is the music also resident in your computer's iTunes Library?

  • Videos only loading partially?

    I use both Chrome and IE 8, and they have been working fine for me up until now. However for the past few days, whenever I've tried to watch a video on sites such as youtube, etc., they've loaded about between 15-60% and will not load any further. The loaded portion of the video will play just fine, but I have yet to see one load all the way through on it's own and successfully play, even after refreshing the page numerous times. After refreshing that page, the video usually loads more that the previous, but never all the way through. Any suggestions as to what might be going on and how to fix this issue?

    Hello! I had the exact same problem.
    Did you check recently your free space avaibility on your hard drive, where your operating system/web browser is installed? Maybe you ran out of free disk space, so there is no space for your cache to load your video into as well.
    If that's the problem, the solution is easy. Just make some free space on your hard drive by deleting/moving items from the used space.

  • Appstore loads partially!

    My Appstore in my iPhone 3GS only loads partially. The 'categories' section cannot load. While the 'features, top 25 and search' can load. Why is this so? I restart the phone but the problem persists.

    I have the same problem... everything other than the categories show up... it happened all of a sudden any idea? Somebody pls help...

  • Problems, with Itunes and windows 7 loading content onto ipod shuffle

    My system is running windows7 64 bit and I have downloaded the 64 bit Itunes, I am trying to load a new playlist onto a ipod shuffle 2 gig. When I connect to itunes it makes me restore the ipod settings and then when this is complete, itunes will only load a few songs at a time and if I try to load more that ten song Itunes just stops responding. I took the shuffle into an Apple store today and they tell me that it OK so must be my system. Can anyone help please.

    Is that ASUS rather than ISUS?
    If so, I think I've found info on the motherboard ... if so it doesn't have the P55 or P55M chipsets that can be cranky on Windows 7 systems with iPod/iPda/iPhone connections.
    Still, we'd better make sure your BIOS and chipset drivers for the board are up to date. Head to the following page at ASUSTek and use the Navigation Wizard to autodetect your motherboard version. Check to see if there are any BIOS updates, chipset driver updates or other driver updates available for it (say, integrated audio, display adaptors, raid controllers, etc):
    http://support.asus.com/download/download.aspx?SLanguage=en-us
    If you're behind on anything, and you update, does that improve your syncing performance?

  • My iTunes on my windows 7 pc works.  However, when I try to get to the iTunes store it only loads halfway but the screen only says iTunes store.  How do I fix this?

    My iTunes store works on my windows 7 pc. However when I click on the iTunes store it only loads halfway and the screen just says iTunes store. How do I fix this?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • I bought CS4 a while back, and only loaded it one time on a PC with Windows XP operating system...

    I bought CS4 a while back, and only loaded it one time on a PC with Windows XP operating system. I understand I can load it 2 times. Will it work if I load it on Windows 8?

    You won't know until you try. These older versions were never extensively tested or certified on Win 8, but it should work for the most part iuf you follow the necessary procedures liuek turning off UAC and otehr fancies that may get in the way.
    Mylenium

  • Can only load Norton Identity Safe in one Firefox window.

    I can only load Norton Identity Safe in one Firefox window. I used to be able to open up my Identity Safe and log in on any open window. Now it only opens in the first Firefox window I open, but not in any others. Can I fix this problem ?

    Hi,
    You can try deleting [http://kb.mozillazine.org/Localstore.rdf localstore.rdf] and [http://kb.mozillazine.org/Sessionstore.js sessionstore.*] files in the [http://kb.mozillazine.org/Profile_folder profile folder] after exiting Firefox. To open the profile folder via Firefox: '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Show Folder'''.
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    Please note that deleting the sessionstore.* files would also forfeit the open tabs so you may want to bookmark them. You can '''Bookmark All Tabs''' by right-clicking on a tab. For the [https://support.mozilla.org/en-US/kb/what-are-app-tabs?s=tab+group&r=2&as=s App tabs] you would have to bookmark them individually.
    If the problem persists, the [http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/bd-p/Toolbar_IDSafe Norton support] would also be helpful regarding any new issues in the toolbar functionality.

  • My deskjet 9800 only prints partial pages

    My deskjet 9800 only prints partial pages in 11x17" format. then pulls another paper for two inches of printing then pulls another paper for another two inches of printing etc. Other sizes work fine. I just upgraded my computer and changed cable to a usb port. I downloaded a new driver and reset all the settings. I am lost as what to do. thank you Einer Mortensen

    Hello , Welcome to the HP Support Forums!
    I understand that you're experiencing partial print issues when printing from your Windows 8 computer to your HP Deskjet 2540 All-in-One Printer. I would like to assist you today with resolving this wireless printing issue. Because you are able to scan without issues, and are able to print from other devices perfectly fine I do not believe that this is a networking issue, or a software and driver conflict between your Windows computer and your printer. Rather, I believe that there is a wireless printing port (WSD Port) conflict occuring on your computer. Can I please have you follow the steps below to resolve this issue.  Microsoft has released a Hotfix to correct printing issues within the Windows 8 and Windows 8.1 Operating Systems. This includes 'Partial Printing' and 'Printer Offline' issues. The printing issues appear to affect networked printers regardless of make or model and is a conflict with the WSD Network Port on Windows 8.1. Please click here to download and run a Microsoft Fix It Tool. Once the website opens for the Hotfix please click the button for 'Hotfix Download Available'. Please follow the onscreen prompts to install the Hotfix. Once the Hotfix has been loaded please test wireless printing again. If printing fails you may need to restart your computer for the Hotfix to take affect. Once your computer comes ON test wireless printing to confirm that the issue has been resolved.
      Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Maybe you are looking for