Windows 7 only works when install disc is in the drive

Background:
Macbook Pro 7,1 (13 inch, bought in early 2011)
Mac OS X 10.6.8 (10K549)
Boot Camp Assistant 3.0.4 on Mac
Boot Camp 3.3 on Windows 7
Windows 7 is burned to a DVD. It was downloaded as an ISO through my school's Academic Alliance with Microsoft (a.k.a MSDNAA - Microsoft Development Network Academic Alliance).
Story:
I've been trying to get Boot Camp to put Windows 7 on my Mac for some time now. I've followed the manual/guides for my computer, which in short followed these steps:
Partition drive
Insert Windows 7 disc
Start installation
Install Windows
Download and install Windows updates
Insert OS X install disc
Install Boot Camp
Upgrade Boot Camp to 3.3
That all seems to work well and fine, but sometimes I would have problems where upon restarting I would have to hold the Option key to choose to load Windows, instead of Mac OS - that's fine. I would see the Windows drive and chose it, but then it would always freeze. Eventually I tried leaving the Windows 7 install disc in the disc drive and when I held the Option key I would see the Windows Install disc as an option to boot as well. I tried booting with that chosen, and everything would work fine. That's how I was able to do steps 5-8 in my above list (because whenever my computer had to restarted, I had to choose the Windows Install disc).
Now, with everything installed and updated, and with no disc in the disc drive, I started up my Mac and choose to boot Windows, but it freezes within 10-30 seconds of logging in (just like before). However, with the Windows 7 install disc inserted, and choosing to boot through it, it works. This doesn't seem right.
Anyone have any idea what's going on and how I might resolve this issue?
Thanks in advance; and let me know if I can provide any more information for you.

bought in early 2011
Those Macs do better wtih Lion drivers. Even if you install Lion not on internal drive but elsewhere.
A lot/most burned ISO like yours can even install but are bugged with problems if you didn't also do the burn at the slowest burn speed. Which sounds likely.
Last two: Windows partition was too small and doesn't have the free space for all the updates.
Finallhy, test RAM with memtest either Windows DVD which is a good way really, or from Terminial in OS X (where you can run dozens of little concurrent memtest windows and make short work even doing 5 loops x 256MB memory at once)

Similar Messages

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock

What's wrong with my MacBook, it only works when its plugged in to the wall charger

my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

Marina -
What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
I'd take it to Apple and have them troubleshoot it for you.

IPhone 4 blacks out, could not work with just pressing the home button and lock screen button, only worked when I plugged it in the charger

My iPhone 4 started to blackout out of nowhere and it wont work only until I plugged my phone into the charger. It has been going on for several times in a day, where it just randomly blacks out. Do anyone know what is the problem and how do I exactly fix this? thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why does my iPod Nano only work when it is plugged into the computer?

My iPod nana is a 4GB iPod and it does not work at all until it is plugged into my computer. It works perfect when it is plugged into the computer. It will not even turn on if it is not plugged in.

By the sounds of it, the Nano's battery is shot and in need of a replacement. You can have replace the battery for a flat fee or send it to a third party repair company for a little less.
Not much else you can do in terms of troubleshooting this issue.
B-rock

My iPhone 4 will only work when it's plugged into the wall charger. What can I do ?

Please help.

Hello DaShiaa,
I would be concerned too if my iPhone would not power on unless plugged in. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why does my audio only work when i put water on the audio plug?

whenever i want to listen to music, i have to put water, or some liquid on the TRS (audio plug for earphones) for it to work. It will not detect an earphone without water. There is NOTHING wrong with my earphones, they work in other things without water. They are iFrogz. I need help really bad because i dont want to carry a water bottle on the bus and dip my cord in it JUST to listen to music. It is really annoying
Ipod Nano 7g Blue

It sounds like a hardware problem, so it's probably not something that can be solved without repair (or replacement). There may be a fault in the headphones jack that affects contact with headphones plug. Water is an electrical conductor, so it improves the connection enough so it works temporarily. That's my theory... But because water is an electrical conductor, it can cause a short circuit that may damage the iPod. That's why the warranty is voided if you accidentally get your iPod wet.
You can check your current warrany coverage with the iPod's serial number, here
https://selfsolve.apple.com/agreementWarrantyDynamic.do
I believe Apple uses the serial number most of the time, to verify coverage. If you have an Apple Store nearby, there are Apple tech support staff at the store's Genius Bar. You can make a reservation (to avoid a wait) using the store's web page.
http://www.apple.com/retail/
Otherwise, you can contact Apple tech support through the "Contact Us" web page
http://www.apple.com/contact/

Do i need a new battery if my computer only works when it's plugged in?

my lap top only works when it's plugged into the adapter. it doesn't CHARGE anymore. it works fine when plugged in but shuts off if it's not. Do i need a new battery? i just got a new charger because the one the computer came with died. please help!

Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion or 10.8 Mountain Lion), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.

My colon/semicolon and apostrophe only work when they want to =[ please help!

They only work when they want to. The keys starting doing it about a year after I got the Mac. Please let me know what can be done.

Hey there jeremy,
It sounds like your Volume buttons aren't working correctly and you are also not getting sound from your built in speaker. I would start by quitting all the running apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

I just found a way to get Fixit to Run. Go to http://support.microsoft.com/fixit/ and then pick "Install or upgrade software or hardware" and run Fixit from the "Run" button on the webpage. I just picked run, instead of save, and ran it directly from the web page for each of the apple software. If the window doesn't come up full size, hit "Tab" twice and then "Return". You'll be able to see the prompts from there. Have it attempt to uninstall iTunes on its own. Repeat the process for any of the other Apple products, including Bonjour and iCloud. Then, go to the iTunes website and install from there. I had a downloaded copy and installed from there, but it came up with an error about missing the apple help, or something like that. It allowed me to uninstall, and I reinstalled direclty from the website, and it all works now.

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?

Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Windows update error 800f0246 when installing printer driver

I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?

No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.

My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?

My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.

Welcome to Apple Discussions!
It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues.

MacBook Pro will not charge, only works when plugged in.

My MacBook Pro says it is at 68% battery not charging but the source is coming from the power adapter. It hasnt gone down for the past day or so. Also it only works when it's plugged in and shuts down immediately when the charger is unplugged. I just bought a replacent cord and this started happening. Does anybody have a fix for this? Here is some of the System Information (I dont believe it is a battery failure problem though the system says its normal)
Charge Information:
Charge Remaining (mAh):          3201
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          4678
Health Information:
Cycle Count:          277
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11795
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x002b46f4
Charging:          No

Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no improvement, make an appointment at an Apple store genius bar for a free diagnosis.
Ciao.

Windows 7 only works when install disc is in the drive

Similar Messages

Maybe you are looking for