Windows 7 Premiere Pro CC Jumps Frames

So I installed CC a couple months ago and it was working great until about two weeks ago i started to notice that my footage was playing back and jumping frames. I can't think of anything in particular that I did to cause such a change.
Here's the steps I've taken to trouble shoot.
Upgraded to latest version of Premiere Pro
Uninstalled and reinstalled PR
Updated GFX Card Drivers. TWO GTX 580s
Tried opening a new project
Tried opening different kinds of footage. I.E. Prores, H264, AVC Intra
Footage is stored on Raid I tried playing it from my SSD
When I first installed it I didn't have this problem...
All the footage does the same thing. It sounds fine but it's like it plays 20 frames then jumps 5. constantly over and over.
Footage plays back fine on my macbook pro.
Any more ideas?

When I go to creative cloud app it tells me that app is up to date. So whichever is the current version.

Similar Messages

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

Premiere Pro Skips every frame on my PC

I am running 8GB of ram on my PC with two monitors. One I use for playback of my timeline the other for all of my editing. My problem with Premiere Pro is that when I edit my projects the video skips all the time making it where i cant edit that good. I really need to be able to see what I may doing in real time without it skiping every frame. What can I do to stop the skiping or not least make it not so bad?

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
My 3 hard drives are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Premiere Pro CS6 - Project frame won't retain its layout or location between opening and closing?

I filed this as a bug, but perhaps I'm thinking through this wrong and would like to seek help.
I'm finding that the Project frame in Premiere Pro CS6 does not retain its layout between opening and closings.
Here's what I do:
1) Open a project.
2) Create several bins and populate them with media. Expand the contents of a bin by clicking the disclosure triangle to the left of the folder.
3) Undock the Project frame only.
4) Close the Project frame with Command-W
5) Use ****-1 to reopen the Project frame.
Repeat steps 4 and 5. The result is that the Project frame does not remember which bin was open. Furstratingly, it also does not retain which bins were expanded or collapsed.
And worst of all, it will also open in random areas of the screen. (The expected result is that it would reopen in the same spot of the desktop where you last closed it, no?)
I'm a big organizer -- tons of footage across many different bins. I open bins, close them, keep some open, close others... easily dozens or hundreds of times during an edit session. I'm beginnging to feel like I'm swatting flies or playing whack-a-mole just to get my bin views correct!
Or mm I approaching this wrong?

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Premiere Pro CC 'single frame' export squashes aspect ratio

Hi,
When I used the single frame export button to export a single frame from my timeline, the 16:9 ratio gets squashed in.
The image has a play button graphic on it and that should be round but it comes out oval.
When I import the image into Photoshop, it looks normal 16:9 but when I save it as a jpeg and open it up, it's still squashed.
I would be so grateful if someone could help me sort this out.
Cardamada

Thanks Jim for your quick reply. I am still wondeirng if there is a better way. The footage I am editing is 1920 x 1080 DSLR footage. Anytime I export a frame from Fnal Cut Pro it does it fine. I moved over to Adobe recently and I'm suprised that it's not working. I wondered whether there was a way to change my export settings so that it exports with square pixels from Premiere Pro. Meanwhile I will try to follow your instructions re square pixles and photoshop.

Poor quality encoding on OSX & Windows - Premiere Pro CC & Media Encoder CC

I run two computers, a Mac Pro and a Qosmio running Windows 8. I was experiencing rendering issues on my Windows 8 machine, using the same presets and settings I always have. Later installed CS6 using my old serial and render quality was fine.
Downloaded CC on my mac and sure enough I get the issue with both of my installed versions of CC and not with CS6. I recorded a simple video in quicktime to demonstrate my issue.
On the left is CC, right CS6. As you can see, my settings are identical. These were rendered in Encoder, but Premiere produces the same results.
These are the final videos opened directly after rendering. Top is my encoded file through CC and the bottom is my encoded file from CS6.
Any ideas? I keep going to support for this issue and either mysteriously lose my connection and am never recontacted or simply ignored and have them render a video and say "I don't see any problem with this" even though I'm seeing the same discrepencies I'm showing above.
Also, it does this for all recorded videos. I made the mistake of using a video recorded in Captivate for a support call once and was shrugged off as it being a captivate error. It does this for all videos, regardless of their source.

Hi victoriavanpatten,
Sorry you're having trouble.
The first thing I noticed is that your source file is 60fps and the preset you are using is for 24fps. You might want to use a custom setting that matches your source sequence. I could not locate any presets for 60fps video. You have to create one.
You can also try 1 pass VBR instead of 2 pass VBR in Bitrate Settings. I have heard a few complaints about 2 pass VBR encoding.
Let us know if these possible solutions help you.
Thanks,
Kevin

Final Cut Pro - sticking & jumping frames

Hi, I am 10 minutes into an opening sequence using 'Final Cut' when the frames start sticking and jumping at the same place. Past this point - if I reposition the cursor everything is OK. When I deleted the troublesome clip and replaced it with another at the same point the same thing happened. Can anybody help?

The details are important.
Version numbers of FCP, QT, and OS.
RAM, computer, and media drive.
Sequence settings and acquisition cam.
Help us out with your workflow and set up.
Your problems may be dropped frames that results from a too slow media drive or multiple FW drives on a single bus.

Premiere Pro begins dropping frames after a few hours of editing

Is anyone else experiencing this? I'm running Premiere CC on a new iMac 27inch and after a few hours of editing both the source monitor and record monitor begin dropping frames at a pretty high rate. The only way I have found to fix this is to shutdown the computer. But in a few hours, I'm back to dealing with dropped frames. My iMac is tricked out with I7 processor, 32 gigs of ram, and an nvidia graphics card with 2 gigs of ram. I am editing with raw files from a Canon 5D, but the edits are pretty straightforward, nothing too complex. Does anyone know a fix for this?

since your name is sun baked...it could be you live in a hot area...could this be heat related ??

Premiere pro cs6 changes frame rate and changes audio pitch! Video in description! PLEASE HELP

Im having awful issues with premiere and I cant figure it out! Please help! i have a video of my issues here! http://youtu.be/MaDj8fo6meE

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
What are you editing, and did you do this to be sure your sequence and video match?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

How to transfer an FCP project to Windows Premiere Pro

I've tried to do the XML thing, and I have gotten a project across, but unable to find the media on the drive.
I'm using an external drive and MacDrive software on my PC, so the files are direct from the timeline. I've even used FCP's media manager.
I know there must be a way to do this, and I'm counting on the brain power on this forum to help.
Any suggestions are welcome.
Happy New Year!

There are a lot of tutorials about this -- here's one http://www.youtube.com/watch?v=pFamNmfVqls&feature=player_embedded
Also some help such as here http://help.adobe.com/en_US/premierepro/cs/using/WSd9957a95a81082eb28f05af5126718c47be-800 0.html
Or try googling

Premiere Pro CS4 Crashes When Importing HD Clips

I've used Camtasia forever but recently decided to "upgrade" to Premiere Pro when I got my new Macbook. Not being familiar with Premiere at all, I thought I would play with it with a few short clips. I have HD footage of my martial arts class which I shot with my Canon Vixia HG20 and copied it to my Macbook. However, when I imported a few clips into Premiere Pro and try to play it, it hangs. It will play one or two clips and then it stops responding after that.
All in all, it's only about 2 minutes of footage that I've put into Premiere Pro. I have no problems putting the clips into the Timeline but when I try to preview the clips (either in the source monitor or the program monitor windows), Premiere Pro gives me the little rainbow pinwheel and 20 minutes later, it's still spinning around. I bought a 500Gb external hard drive to use as the scratch disk because I thought maybe it was a space issue having everything on my Macbook but I still get the pinwheel. My only solution is to force quit the program.
I have a 2.4GHz Intel Core 2 Duo Macbook Pro on OS X (10.5.6) with 4GB of memory, GeForce 8600M graphics card, and 200GB hard drive. I've read about a of of the crashes on here but didn't really see anything similar to my situation. Any ideas? I spent a lot on Premiere Pro and am not willing to give up on it quite yet.
Please and thank you!

17 Mbps is still at the high end, but IMHO they should ultimately work.
Very often with AVCHD, you have to play a clip until it freezes, then wait. If you monitor CPU usage during the waiting time, you'll see that it is quite active. The process using the CPU is the ImporterProcessServer, which has to do some kind of magical stuff to the AVCHD clips in order for them to play and scrub in Pr. Once the IPS is done, you should be able to scrub and play the clip just fine.
Usually you only have to do this once per clip, but sometimes more. Sometimes the work that the IPS does carries over between Pr sessions, and sometimes it doesn't.
Smaller frame sizes and lower bit rates in AVCHD video helps make the editing experience in Pr much better.
My hope is that the upcoming 4.1 update will address some of these AVCHD issues.
-Jeff

Premiere Pro identifies 25fps AVCHD 1080p video as 100fps

I recently purchased a new Panasonic camcorder (UK PAL standard) which shoots full HD at 25fps progressive. When I import the clips into Premiere Pro (CS6 or CC) both programs report the file properties to be 100fps, as does Windows 7. In fact, every program I can lay my hands on reports the codec frame rate to be 100fps.
I’m at a loss to understand why. If I record video with the camcorder set to 25fps interlaced, Premiere Pro reports the frame rate as 50fps – which I took to mean 50 fields/sec which at least makes sense. The 100fps has me beat though. I should say that everything works fine, there’s no change in operation or use.
Any ideas anyone?

I have no idea why, but when I checked the file information today, it is correct. The only difference was yesterday I copied the files from the camcorder to HDD, and then checked the file properties through Premiere Pro immediately afterwards. On finding the strange fps values, I then of course tried other programs, all of which reported the same wrong file properties.
The only difference between today and yesterday was my PC was shut down last night and restarted today. I can only assume, some file system cache hasn't updated/purged and hence the bizarre values. Everything is fine now.

Premiere Pro keeps crashing when using overwrite (.) shortcut in Source Monitor

When editing a clip in the source monitor and then using the (.) key to overwrite the clip onto my timeline Premiere Pro keeps crashing. If I select the Timeline window and then press the (.) key it works fine, but if the Source Monitor is highlighted and I press (.) it crashes every time and shows these windows:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/mightykilt/shared/
adobe/Mediacore/Backened/Make/Mac/../../Src/
Sequence/LinkContainer.cpp-184]
and then opens this one:
Adobe Premiere Pro
Sorry, a serious error has occured that requires
Adobe Premiere Pro to shut down. We will attempt to
save your current project.
It saves my current project as a copy, which is good, but I've now ended up with lots of copies of the same project as it keeps on crashing. In order to work I have to make sure that the Timeline is highlighted before I use the shortcut. It makes for very precarious and tense editing!
I've tried to update my system (I have the Production Premium Suite), but it came up with this:
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.5 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Prelude CS6 1.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Photoshop 13.0.5
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
DPS Desktop Tools CS6 26.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Illustrator CS6 Update (version 16.0.4)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe SpeedGrade CS6 6.0.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe After Effects CS6 11.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Fireworks CS6 update to improve Mac 10.8 platform compatibility and resolve usability bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Audition CS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Premiere Pro CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Flash Pro CS6 update 2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
I'm using a MacBookPro 15", OS X 10.8.4 and editing footage filmed at 24fps 1920x1080 on my Canon 550D/T2i. All .MOV files.
I purchased my software from iSoftware.co.uk. I'm worried that could be the problem.
Any help would be hugely appreciated. Thank you.
Sam

A crash with a very similar error message was fixed in the new CC release. The bug report in that case involved creating a multi-cam sequence, so it might not be directly related.
If you have a chance to download the CC trial, we'd be interested to know whether the crash remains in the new version.

Premier Pro is adding frames in the beginning of the video

Hello guys,
I have the following problem with Premier Pro.
1. Several videos with different frame rate (24 fps and 30 fps)
2. I create new sequence 24 fps
3. Import videos to project and set them all to 24 fps via Interpret Footage.
4. Now I am adding video to sequence, but Premier is adding 3 frames in the beginning from totally different video.
What is that?
Record of my screen is here
Adobe Premier adds 3 frames in the beginning of the videofile | Screencast-O-Matic - Free online screen recorder for ins…

I'm not sure why or how PPro is inserting frames from a different clip. But before digging into that, it might be worth exploring why you're using Interpret Footage to change the frame rate. In case you're not aware, Premiere Pro manages mixed frame rates automatically, so you don't have to do anything if you want the 30fps clips to play at normal speed in a 24fps sequence. In fact, changing the frame rate changes a clip's duration and playback speed.

Premiere Pro CC 2014 seems to Corrupt projects created with earlier versions

I have opened in PPro CC 2014 projects created in PPro CS6 or PPro CC. Every time PPro crashed and got the message " PPro Debug Event - PPro encountered a major problem and has stopped working" After that the project seemed corrupted and could not be opened even in earlier versions.
I get the following message
Première Pro Debug Event (Title of the window)
Premiere Pro has encountered an error
[c:\caravan\releases 2014.09\shared\adobe\mediacore\mediafoundation\api\incK... (can't read the res...)
Then there is a "continue" button if I hit this button I get the following window
Following a serious error PPro must shut down. The program will try to record your current project.
Has anyone encountered this problem?
I don't dare open any old project. help!

Hi there!
I´ve updated to latest version and then opened my project and got this error.
Then I found in a forum that I should delete the ADOBE folder in \my documents
I´ve deleted and then I could open the file again.
But the .MP4 and some other video files doesn´t open.
I saw that the 'Effect Presets and Custom Items.prfpset' file on \my documents\adobe\premiere Pro\8.0\Profile-myprofilename was causing the error.
I also saw in other forum that I should rename Adobe folder to old.adobe from \userfolder\appdata\roaming and \userfolder\appdata\local but this hasn´t solved the problem.
I tried also to reinstall Quicktime and K-Lite Codec Pack but the problem persists.
Have you found any solution??
Regards
Lucas

Windows 7 Premiere Pro CC Jumps Frames

Similar Messages

Maybe you are looking for