Windows 7 premium 64 bit crashes after latest itunes update

Yesterday while on the internet, a notice popped up on my windows pc to update itunes. I closed the internet and updated itunes, restarted the pc and nothing worked...error message "IAStorIcon has stopped working." had to restore my computer to an earlier time…had a lot of problems. Is there a problem the latest itunes update? Now I’m concerned about installing itunes. Has anyone else had this problem? I have never had a problem with itunes in the past. I have been using itunes for a long time. I would appreciate any help.

Similar Messages

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After latest iTunes update I get error message when syncing:

"iTunes could not sync information to the iPhone "name" because a connection could not be established to the iPhone". Same for my iPad, same for both even after upgrading to IOS6.0. Any ideas?
I tried to carry out a restore on the iPhone but iTunes cannot back it up.
Is the latest iTunes broken? or is it just me?
I am on Windows 7 64 bit, Never had this problem till the latest iTunes update.

So I am unclear, did you purchase these songs or import them from a cd?
If you imported them and still have the CD try importing them again and see if they work the delete the others.
Or if you purchased from itunes re-dowwnload and see if they work. Maybe they are corrupted files and this should resove it.

MSVCR80.dll file missing (after latest iTunes update). Unable to reinstall iTunes either. Fixes?

After installing the latest iTunes update, I am unable to open iTunes (The program can't start because MSVCR80.dll is missing from your computer). Plugging in my iDevices won't prompt iTunes to open, either (they are viewed only as mass storage devices). I attempted to reinstall iTunes, but recieved an error message that said I had insufficient rights to install (I am an administrator). Is anyone else having similar problems? Is there a way to fix it that won't include uninstalling the current version of iTunes? Don't want to lose all my files! Thanks for a rapid response, Community. I appreciate all the help I can get.

Hi bookishwench,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Cannot purchase when signed in after latest ITunes update

Since the latest ITunes update I have not ben able to purchase anything through the ITunes Store. I've tried signing out > restarting ITunes and signing back in which works fine, but when I try to purchase I'm prompted for my credendials over and over again. I repaired permissions, and I get no errors - just more prompts. I know the credendials I'm entering are valid, and the update is the only change to my system since my last purchase. I disabled my firewall as well. Anyone else having this issue?
ITuns Version 10.6.1
Model Name:
Mac mini
Model Identifier:
Macmini3,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.53 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MM31.00AD.B00
SMC Version (system):
1.35f1
Serial Number (system):
YM0081CF9G6
Hardware UUID:
7E5F4216-8AF4-5006-8670-55B50F265667

Unfortunately it won't go into disk mode. Even tried the "put your ipod on a flat surface" trick. I'm wondering if the battery hasn't stopped holding a charge. But it seems the symptoms would be more like a constant battery icon. Instead I'm getting the sad face everytime I try to put it in disk mode or reset. Ideas? Throw ipod against wall? Blow on it like old-school Nintendo cartridges?
Oh, and yes, it is Windows formatted.
Any and all help would be appreciated.

My PC won't sync with iphone 4s or ipad after latest itunes update

When I plug it in, it asks to trust the computer. I have uninstalled and reinstalled itunes. I have tried different usb ports and turning off the firewall.It was working ok til the latest itunes update.

Did you click on Trust? What happens when you do? When you removed and uninstalled iTunes, did you use this support document and follow the instructions exactly? http://support.apple.com/kb/HT1923

Skype crashes after latest auto update!

My machine and settings and everything is same as of previous version, which never crashed. But for the latest version i have witnessed crash for at least 6-8 times within 1* days or so.
I see a screen Skype has stopped working and ... Debug or close this program!
Another type of message is attached.
Kindly assist!
Following may be helpful
Current Skype Version: 6.20.0.104
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex 745
BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.0.8
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 6144MB RAM
Available OS Memory: 6070MB RAM
Page File: 4348MB used, 5227MB available
Solved!
Go to Solution.
Attachments:
Skype Error.png ‏19 KB

I had uninstalled said update and was not any issue after that for last day (3,4 hours working).
But today i have been embraced again with same error. But a clue further to this is that my machine got updated by automatic updates earlier this morning as well.
I have rechecked from my windows update section that your said KB is not in the list; as i have uninstalled it and the windows auto update havent reinstalled it.
Please find further attached images.
Attachments:
Skype Error_3.png ‏25 KB
Skype Error_4.png ‏110 KB

Applications crashing after latest security update??

So i was prompted to download the new security update and the newest version of iTunes today. i do so, and upon start-up, i open adium and try to chat with a friend. before it could even open the IM window, adium chrashes. I updated adium and it still does the same. I then attempted to see if there were additional updates and the Software Updater also crashes instantly. i havent noticed any problems with other programs yet, but can anyone help me out on this one?
and the problems didn't start until AFTER the security update was installed

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Apps crashing after latest Security Update

Word, TextEdit and Adobe Reader have been crashing since installing the latest Security Update 2005-009. Most of the time, it's when I try to print. I've tossed the .plist of Word, but it hasn't helped.
Everything was hunky dory before the latest Security Update installation.
Are there other things I should try to gain back stability?
Thanks!
Bud

The following may help:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.0.6 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
In addition to the above:
http://discussions.apple.com/thread.jspa?messageID=607542#607542
If the problem is limited to only printing, try deleting your existing printers and reinstalling them.

Screen blacks out after latest itunes update installed

last year after installing an update for itunes my screen blacked out. it then intermittently worked for a few days before failing permanently. this was later fixed by replacing the inverter board. i didn't suspect the two events were linked. however, yesterday i got the latest update for itunes and again a few minutes after installation my screen blacked out! deja vu... it seems unlikely but is it possible the screen fault is caused by updating itunes?
this morning the screen is working again and i have run system restore to undo the installation. fine, but when i try to open itunes it starts installing again.
AJP 5600D laptop PC Windows XP

Thats odd. Not sure what this error means, but you could always try repairing disk permissions, that seems to solve most of the random errors that occasionally pop up on my OS X macs. Load the OS X install dvd into the drive then restart your machine holding the C key. choose english as the main language. Then go into the utilities menu and select disk utility. Click on your hard disk then click the repair permissions button. Once completed, restart the computer into OS X. Then try your screensaver again. If this doesnt work, post again and I'll take a closer look at it.

My Home Sharing does not work any more after latest iTunes update

After iTunes update to 11.1.3 my Home Sharing does not work any more!
It worked just fine for several years...
I tryed to do everything I could find on Apple support... NOTHING works.
Most of Apple so called updates turn out real crap...
I am wondering whats happening to Apple?...

Hello igor_rena,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario

After latest itunes update i can no longer drag songs using home sharing.

Previously, I was able to open home sharing between my husband (his mac) and my computer (pc). But after the itunes software update on my pc, the ability to import and drag songs is gone. I have done it many times before. I see the home sharing library and can browse through it. But can't take any action with it. Can't import to library or to ipod.

With your iPhone connected and selected in iTunes, in Summary pane, select Manually manage music and videos.

Problems with 3GS after latest Itunes update

After installing the update my phone just has the usb port and itunes logo on screen.
Ive:
-Restarted my pc a few times
-Re-Installed I tunes
-Re-booted the iphone several times
-Closed any anti-virus things running
I've searched on several topics across google and non have solved my problem so far, I'll send the person who can solve this a metal pint of thank you.
I'm not overally smart with computers but i know enough, all i did was install the update.

Have you tried this:
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Some Users have Reported that a Restore as New has Help Revsolve their Issues:
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Windows 7 premium 64 bit crashes after latest itunes update

Similar Messages

Maybe you are looking for