Windows 7 Pro 64 bit Product Key

I just got a new Macbook Pro 13" for Christmas, and I am trying to install Windows 7 Pro 64 bit via Bootcamp. The installation went smoothly enough, but when I try to type in the product key that Microsoft gave me, it tells me that the product key is invalid. Help!

I unfortunately bought the Upgrade version of Windows 7 Home. I didn't see the part on page 5 that said a Full version had to be used until it was too late. Anyway, after the Product Key was denied I looked here to the discussions. Found this post. Followed the link to winsupersite. Since Method #1 didn't work initially bringing me here I moved on to Method #2. Modifying the regedit.exe file as instructed and then trying the Product Key again resulted in a registered copy of Windows 7. Thanks.

Similar Messages

Lost my Genuine Windows 7 Professional product key

My laptop DetailsHP Pavilion dv4Serial- CND94911YDProduct- VT100PA#ACJModel- dv4-1502TU I have purchased it in 2010. Due to some problem have to format the windows 7 professional and unknowingly installed windows 7 ultimate version. I used it for an year but now I am seeing the message that your winodows in not genuine. So I reinstalled Windows 7 professional 32 bit. But the problem is I have lost my windows 7 professional 32 bit product key. Can u please fix the issue?

You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
.

Where can I find the windows 8.1 product key

Where can I find the windows 8.1 product key for my HP Pavilion Model p7 – 1451. The HP came with windows 8 pre-installed and then I upgraded to windows 8.1 on-line free from Microsoft. I need the windows 8.1 product key to upgrade to windows 10.

Hi,
The key is in the BIOS of your machine, please use the following tool to get it:
http://www.belarc.com/free_download.html
When run this tool, it produces a report, scroll down to Software Management section. Windows 8 or 8.1 product key is in there.
You can also use the following tool to find out:
https://www.magicaljellybean.com/keyfinder/
Regards,

Сhange the product key for windows on the product key on a Mac OS.

Our family purchased Adobe Photoshop for Windows, and then changed the computer to Apple IMAC, you can change the product key for windows on the product key on a Mac OS. my key for windows had not even been activated.

http://kb2.adobe.com/cps/405/kb405819.html
Mylenium

The Windows 7 Professional product key you typed is invalid for activation.

Got a T410 & was trying to activate windows 7 that came preinstalled (OEM) ?????-OEM-8992671-?????
Windows Product ID: ?????-OEM-8992671-?????. Windows Product ID Type: 2. Windows License Type: OEM SLP. Windows OS version: 6.1.7600.2.00010100.0.0.048
Product ---- 2516-CTO
Serial ----- R8xxxxx
BIOS: ------ 6IET55WW (1.15)
Warranty: -- till 03/2011
I get the message: The Windows 7 Professional product key you typed is invalid for activation.
I also have Norton Internet Security Preinstalled.
I am new to this can anyone please help?
Thanks in advance.
Moderator Note; s/n edited for members own protection

Hi joeamir, and welcome to the Lenovo User Community!
Check this out:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-75177&sitestyle=lenovo
And this thread:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-update-new-BIOS-SLIC-misssing/m-p/2194...
I don't work for Lenovo. I'm a crazy volunteer!

Windows 8, the Product Key is now encypted in the Bios and Windows7 Pro install

I have had to reinstall my ProBook from sratch. It was configured from the supplier with Win 7 Pro. Now I need the Product Key and I beleive it is a Windows 8 Product Key and encypted in the Bios. How can I get my machine running on Win 7 Pro or even Win 8 Pro. Either would be good? Is there a mothod to retreive the Product Code?

Yes you can retrieve your product code either in Windows activation page or you can install HP support centre. If you have warranty you can make a technical chat with the expert and they will will guide you through the screens. If your warranty has expired you can call toll free number of HP support for your country and you can explain them your problem so that they will help. The product key will be encrypted in BIOS. So they will help you.

2008 R2 64 Bit Product key issue

Hi Team,
I download Windows 2008 R2 64 bit Evalution (180 days) in microsoft download center . After download comple I try to install this in my Laptop its will asking the product Key.
No option avalible skip the product key. This is very very important for me we are middle of some thing. Can you please provide me the solution for this.
Realy very happy for quick response !
Thanks !

Hi,
Changing the product key from the evaluation install to a released channel like Retail or Volume does not remove the timer that is present in the eval edition, this means there are potentially circumstances that could cause the machine to go into a an expired
state since it is evaluation media. Because that timer is still present, it is not supported to convert from Eval to released product. the recomendation is to rebuild the server with the correct product key.
More related third party article:
convert from retail to VL on windows 2008R2
http://www.networksteve.com/forum/topic.php/convert_from_retail_to_VL_on_windows_2008R2/?TopicId=16783&Posts=2
The simlar thread:
Server 2008 R2 180 day Trial to Full
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9de939ee-b1d2-4940-a9e0-edbae17abc10/server-2008-r2-180-day-trial-to-full?forum=winservergen
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Do you have to get a full windows disc to install on mac or can you download the full windows with a product key?

Well I've been trying to find a full installment of Windows 7 32/64 bit Ultimate/Home Edition/Professional but I can't find a disc. So basically I'm asking can I just download Windows 7 from the internet with the product key or do I HAVE TO get a disc and install it through Bootcamp?

I don't know if you can legally download a full Windows 7 installer, but if you can find one, you just need to copy the image to a flash drive. See:
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
and
https://discussions.apple.com/thread/4087200?start=0&tstart=0
Amazon has several different versions of Windows 7 available on disk, though. Have you tried them?
Regards.

WINDOWS NOT ACCEPT PRODUCT KEY OF BACK PASTED PAPER

DEAR SIR,
THIS IS TO BRING UNDER YOUR KIND NOTICE THAT I HAVE DV6 6016TX PRODUCT NO LQ457PA . I HAVE CREATED MEDIA CREATION FILE AND DOWNLOADED WIN 10 HOME FOR 64 BIT, BUT WHEN I TRIED TO ACTIVATE IT , IT SAYs IT DID NOT RECOGNISE MY LAPTOP PRODUCT KEY. IT SAYS THAT PLS CONTACT SERVICE PROVIDER FOR INFORMATION
PLS HELP ME IN THIS REGARD
YOURS TRULY
KHEM NARAYAN PAUDYAL
PHONE (removed content)
email. (removed content)

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you!
Please review the following documents to help you with the Windows 10 upgrade:Upgrade to Windows 10HP Notebook PCs - Upgrading to Windows 10HP PCs - Understanding and Using Windows 10HP Products - Where Do I Find Windows 10 Drivers and Software for My Model? Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Can I install Linux and then use the original Windows 8 OEM product key for a virtual machine on the same computer?

I have ordered a new laptop and expect to receive it in 2-3 weeks. The laptop comes with an OEM version of Windows 8 installed. I wish
to install Linux as the host operating system and create a virtual machine running Windows 8. Can I legally use the product key from the OEM installation to activate a virtual machine that will only be used on the laptop that had the original OEM installation?
If so, what is the procedure to activate the copy installed on the virtual machine?
This question has been addressed for Windows 7, but my searches did not reveal this question posed for Windows 8.

Technically, no. The OEM is licensed only for the physical hardware on the system. It isn't licensed for virtual hardware.
You may find you're unable to activate your OEM license in the VM. A lot of OEM Windows look for specific hardware to verify they're being installed on the correct hardware.
Although here: http://www.microsoft.com/oem/en/Pages/support-faq.aspx#fbid=Zh0SiBdas5I
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version as long as it is properly licensed. To be clear, a separate version of software must be installed
for both the “standard” and “virtual” installations.
You still may not be able to activate if there is a hardware block.
The best place to ask this is to Microsoft licensing, any response you get here, including mine, won't hold up since it's not an official answer.
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version
as long as it is properly licensed. To be clear, a separate version of software must be installed for both the “standard” and “virtual” installations.
edit: removed the duplicate Q&A

How to find Windows 8.1 product key on the laptop?

I have a problem since doing the windows updates. My laptop seams to have erased everything off my hard drive, I have a legitimate windows 8 disk to reinstall it but no product key, is there anyway to find it on the laptop?
I have tried doing the regedit, but can't seam to find it any where

When you buy new notebook and get it with preinstalled OS you will get one valid version that includes valid product key.
With other words original version that you got with your machine will be properly activated. Product key belongs to this original version only and you cannot use it for activation if you want to install own OS version.
For your Win8 version you must pick up product key from Microsoft.
Of course you can have original OS version again but you must order it by Toshiba - https://backupmedia.toshiba.eu/landing.aspx

Windows 8.1 Product Key doesn't work

Back in November, I bought a Lenovo Y50 Laptop that came with Windows 8.1 already preinstalled. After a month or so, a message kept popping up telling me to activate windows. It then would take me to PC Settings to activate it. I could see that there was already a Product Key being used but it said i hadnt activated it yet. I found my product Key but eveytime I try to enter it, an error comes up saying "The key didn't work. please check it and try again, or try a different key"
Also if I try to activate Windows Online it does not let me do so. Anyone have any ideas why this is happening?
Solved!
Go to Solution.

There are two things I can think of. First is that you are entering in the wrong key. As I cannot see what you are looking at I cannot tell for sure. But there are several characters that look similar like the 0 and O or the I and l. Take a look at what you see and make sure you are typing in the correct characters. There is another way to make sure. Get a copy of Belarc and run it. In the log is your Windows 8.1 key. Copy it from Belarc and paste it into Microsoft Word or some other word processor and then change the font. Some fonts will allow you to be able to tell the difference.
The other suggestion is to contact Microsoft. http://windows.microsoft.com/en-us/windows-8/activation-errors
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Windows 8 error "product key does not match any of the Windows images available for installation"

Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?

Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows 8.1 product key

I have just purchased an HP Laptop from PC world with Windows 8.1 preinstalled. I have no disc or product key, however. Could you please advise me if I need to activate Windows or how would I manage if ever I needed to re install windows 8.1 in the future with no disc or key. Thank you.

Script to use:
http://glazenbakje.wordpress.com/tag/bbbbb-bbbbb-bbbbb-bbbbb-bbbbb/
or copy this:
function Get-WindowsKey {
    ## function to retrieve the Windows Product Key from any PC
    param ($targets = ".")
    $hklm = 2147483650
    $regPath = "Software\Microsoft\Windows NT\CurrentVersion\DefaultProductKey"
    $regValue = "DigitalProductId"
    Foreach ($target in $targets) {
        $productKey = $null
        $win32os = $null
        $wmi = [WMIClass]"\\$target\root\default:stdRegProv"
        $data = $wmi.GetBinaryValue($hklm,$regPath,$regValue)
        $binArray = ($data.uValue)[52..66]
        $charsArray = "B","C","D","F","G","H","J","K","M","P","Q","R","T","V","W","X","Y","2","3","4","6","7","8","9"
        ## decrypt base24 encoded binary data
        For ($i = 24; $i -ge 0; $i--) {
            $k = 0
            For ($j = 14; $j -ge 0; $j--) {
                $k = $k * 256 -bxor $binArray[$j]
                $binArray[$j] = [math]::truncate($k / 24)
                $k = $k % 24
            $productKey = $charsArray[$k] + $productKey
            If (($i % 5 -eq 0) -and ($i -ne 0)) {
                $productKey = "-" + $productKey
        $win32os = Get-WmiObject Win32_OperatingSystem -computer $target
        $obj = New-Object Object
        $obj | Add-Member Noteproperty Computer -value $target
        $obj | Add-Member Noteproperty Caption -value $win32os.Caption
        $obj | Add-Member Noteproperty CSDVersion -value $win32os.CSDVersion
        $obj | Add-Member Noteproperty OSArch -value $win32os.OSArchitecture
        $obj | Add-Member Noteproperty BuildNumber -value $win32os.BuildNumber
        $obj | Add-Member Noteproperty RegisteredTo -value $win32os.RegisteredUser
        $obj | Add-Member Noteproperty ProductID -value $win32os.SerialNumber
        $obj | Add-Member Noteproperty ProductKey -value $productkey
        $obj
Open a new text document paste the above script and save as: RecoverKey.ps1 (make sure you choose all files or it will be RecoverKey.ps1.txt)
Run Windows PowerShell as Administrator
Type: Set-ExecutionPolicy RemoteSigned (Hit Enter)
Execution Policy Change "Answer Y" (Hit Enter)
Type: Import-Module "then a space" hold down shift right click on RecoverKey.ps1 from the desktop and copy as path, right click after Import-Module# for the script to paste into PowerShell (note # is a space do not use the #) remove the quotes then enter semi colon at the end of ps1; and type space "Get-WindowsKey" (without the quotes and press enter)
Watch this youtube video just use the script posted above: http://www.youtube.com/watch?v=rDDCTp64nmU
Special thanks to Miquel from AvoidErrors

Windows 10 upgrade product key

When upgrading to Windows 10 in few days, will I need my current product keycode for the upgrade or will I be able to just upgrade with no problems? Have an Acer Aspire E15 and I don't want to be led on a merry chase trying to do a legitimate upgrade considering I already have the upgrade reserved probably like a lot of people.

if you windows 7-8.x is activated with a legit product key, you just need to upgrade, nothing else.no need of product key. http://www.microsoft.com/en-us/windows/windows-10-faq?

Windows 7 Pro 64 bit Product Key

Similar Messages

Maybe you are looking for