Windows 7 Pro hangs or stalls

Hi Guys.
Help needed for Windows 7 Pro problem. After sleep, the system now responds fairly quickly but after about 3 or 4 minutes goes into some sort of stall and goes so slow for around 30 minutes and nothing will respond.
I have carried out a WPR at the time of the stall and here is a link to this, hopefully:-
http://1drv.ms/19rhGh4
Any ideas please?
Thanks.
SP
Is this the same machine as in your other thread? Have you resolved the crashes? You have 2 traces, both show an unknown process causing massive disk reads. Please run Malwarebytes to eliminated that possibility
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Snip one (the small trace from this thread) indicates huge pagefile activity. Is the page file managed by the system? If not what are the settings and where is it located
Snip 2 (from the other thread) run with boot configurations still shows massive HD activity. The unknown process again is causing disk thrashing. The HD writes are what is causing the freezes
Wanikiya and Dyami--Team Zigzag

Similar Messages

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

Mac Pro hangs on authentication

I have a Mac Pro dual-dual 3GHz which has a sporadic issue where (as far as I can tell) processes hang when authentication is attempted.
I haven't seen any rhyme or reason to when this occurs. Sometimes, I will be in the middle of working, and I will notice that Terminal hangs when I try to open a new window. Other times, it will occur after the machine has gone to sleep (it wakes up fine, but then attempting to log in will hang).
When this issue is occurring, all the following will hang:
* Logging in via loginwindow
* Switching users
* Logging in via SSH
* Performing sudo
* Opening a new Terminal window
The problem doesn't always go away upon rebooting. Sometimes, I reboot and everything is normal; on other occasions, the login window will hang after I enter my username and password and click Log in, even after multiple reboots.
This problem has never occurred when rebooting in safe mode. However, often I can reboot in safe mode, log in, everything appears normal (for safe mode), but when I reboot in normal mode, the inability to authenticate occurs again.
When this problem is occurring, it occurs on all accounts.
Eventually, after enough reboots, I am able to log in and work normally (until the next time it happens).
Also, I have never noticed anything wrong with either CPU or memory usage when this problem is occurring.
On one occasion when this was happening, I happened to have an open root SSH session available. I ran sc_usage on securityd and found that it was waiting on 'machmsg_overwritetrap'. It waited over 5 minutes without anything further happening. I'm not sure what, if anything, this indicates. (Also, 'LASTPATHNAME_WAITEDFOR' was blank.)
Any ideas would be welcome.

Corupted object.... I had this under 10.3.x..... had to wipe clean and reload OS X from CD.
I read in a post that you could boot in safe mode, and delete "something" (I do not remember now) where the authentification data is stored and then you re-create your users... search past posts.
My suggestion of a clean reload is a safer bet that you will have a clean system.

Macbook pro hang during operation

last month after putting a flash memory on USB port, my Macbook pro hanged completely and no solution except restart. after that day by day it slowed down in opening of application and operations. these days its very slow and hang several times during operation of an application.
The OS X is 10.9.3, memory is 8 GB, around 70% of hard space is free.
Can someone help me to find the problem and fix it ?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/, /\'$'\n''/g;p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get path of every login item'" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

"Restoring the window layout" hang - tried everything! HELP!

I'm in Mavericks and am experiencing that "Restoring the Window Layout" hang that is kinda infamous around these parts.
Except that in my case, I've done EVERYTHING that all the other links suggest. I have:
*Trashed the Layouts folder (inside Users/myusername/Library/App Support/Final Cut Pro)
*Trashed prefs (inside Users/myusername/Library/Preferences)
*Followed the instructions to remove FCPX entirely (as found here: Final Cut Pro X 10.1: How to remove and reinstall Final Cut Pro X) *and* repeated the removal of Layouts and prefs as stated above.
And the problem still persists.
I am [attempting to run] the latest version (10.1.2). Purchased through the App Store so it is verified as the latest.
I can in no way get FCPX to launch properly. Every time I try, it hangs during the launch on the "Restoring the Window Layout" launch screen. I do see my last-used project partially drawn behind it, but the window is all funky (things are in weird places).
Please help...kinda desperate here...

Thank you so much.
I am certain I had trashed all the prefs mentioned in the other threads (there were about 3, in the Users/Prefs folder), but I tried your key command, got the prompt to completely trash all prefs, and it did indeed cure the issue. Thanks a ton!

Windows XP hangs on boot, computer heats up

Hi,
I recently had my Nvidia card replaced in my Mac Book Pro, OSX 10.4.11 and since then tried to boot up Windows XP with Bootcamp. Windows XP hangs on booting and the computer heats up incredibly quickly. Does anyone know why I can't boot in Windows or how to fix this? The mac partition works fine and I can access my documents etc from windows through the mac side. But I do need to run certain programs on Windows. Any help is appreciated.

Hi and welcome to Discussions,
first thing I would try are the Safe Boot Options of XP described here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11 and especially the 'enable VGA' option to ensure that XP is okay.
While in Safe Boot maybe deinstalling the Nvidia graphics driver currently installed can help.
Might be that because of the replacement, the new one isn't correctly detected.
Hope it helps
Stefan

Very disapointed in Lenovo's service on my T430 machine type 2342CTO with Windows Pro 7 64 bit

I have been a ThinkPad user since the first model 700. I have always liked them and when I have had to use other laptops I found them inferior. However one thing my team has been telling me in the past year or two is that they do not want to purchase anymore Lenovo ThinkPad's. They have told me that the service and support has been greatly degraded. I was hesitant to agree with them until my present experience. We purchase all of our ThinkPad's with a 4 year on-site warranty. We have people who are in the field and when their computer goes down we need to get it back up and running ASAP.
Three weeks ago my hard drive started to give me some problems and one day after shutting down the computer a message came up that it needed to run Checkdisk which it did. I was able to keep it going and I did have a backup. I contacted the 800 number to talk with a service person and they ordered up service for the replacement of the hard drive and also to replace the fan and sent me the system disks for the T430. Two days later the insight service person showed up with the parts. The disks showed up as well via UPS. The service person replaced the fan and the HDD. There were 4 DVD's for the system disks. He started the rebuild and asked if I could finish it and I said I could with no problem. He left. I continued the process. After the 3rd DVD it asked to put in the 4th and when I did a message said that this was the wrong DVD. I tried all the other 3 with the same response. I tried building it from scratch again and the same problem. I called support again and the guy I spoke with thought that I must have a bad DVD and he would send out another set. That set of 4 DVD’s arrived the next day which I was very thankful for. He told me that they could only guaranty 2 days. I thought OK we should be up and running shortly. The same problem occurred again. Bear in mind that both sets of these DVD's were all labeled for the ThinkPad T430 machine type 2342 which was my laptop and for Windows Pro 7, 64 bit. I called Lenovo and this time the tech I spoke with said that there was another set of Disks for my machine that should have been sent. Of course I was frustrated but there was not a lot I could do about that and I asked if they could make sure that they were overnighted to me so that I would be sure to get them on the next day which was Thursday. He told me that he could not do that, that they could only guaranty 2 day. I called the next morning to get the tracking number which they gave me and it was supposed to be delivered on Friday which I was very thankful for. That was Good Friday. However UPS had some severe weather at their hub in Kentucky and everything was delayed and the disks did not show up until Monday. I had now been down a whole week from my first call the Monday before.
The new set of disks was 3 DVD’s labeled for the T430, Machine type 2342 and Windows Pro 7, 64 bit. I started the build process. It continued to work but I made a mistake in the order of disks so I thought that these disks have a problem too. I called Lenovo and they said that I should just send the system in for depot repair. I said that will take at least until probably Thursday. The guy I was speaking to said that I should have it back by Wednesday. I asked if there was any way that I could send it to them directly that day. He said no I could not, I had to wait for a box. I asked if there was anyway to expedite the process and he spoke to his manager and his manager said that the level of service that was on the machine would not allow for any faster service. The also told me that my service contract would allow me to take it to an authorized Lenovo service center around me. I said to him that they probably have a queue as well and that I will have to wait for that. As an aside note we did try service like this with one of our other ThinkPad’s that had a problem and the place messed up the system and we ended up at the end of the day having to send it to their depot for repair. I hung up and though let me try these disks one more time. I did and I saw my mistake and the system loaded up the DVD’s properly. I was getting excited that I could be up and running shortly. However my excitement was short lived. Once it started to reboot and expand the installation the drive failed and said that it had to run Checkdisk. It did and once again there were all kinds of orphaned files etc. I had to reboot and run it from the DVD’s again and I went through the whole process once again. The system went into a complete failure and would not do anything. I called back support with my case # and gave them this information. The box came the next day and I packed it up and sent it off. I then started tracking it and it arrived on Wednesday as expected. Then I wanted to go to the site and track the progress of the repair. The document you have to fill out and send back with the system gives information on where to go on the web to track the process. My shows that it arrived on Wednesday 4/8 as expected. The first message shows “Machine being repaired” at 08:52. Then I checked later in the early evening hoping to see shipped back to customer. However what I did see was the following message “Hold for Parts – Service call is on hold until parts arrive”. Then I kept tracking it and saw another entry on 4/10 at 02:01:54 which was the same “Hold for Parts – Service call is on hold until parts arrive”. That was of course Friday. I called the service and they told me that they were waiting on parts which they could not tell me what parts and that there was nothing that they could do. I then asked if there was anyway to expadite this and the girl I spoke to said that she would seek to accelerate this to another level and that I would get a call from Lenovo in the next 2 to 3 business days! I said to her that you really mean that that is accelerating it and she said yes. Yesterday I received a call from an automated attendant, not a real person who told me that they were waiting on parts for my computer and that it could be “5 to 7 business days before they receive the part”. I could not believe this. I called again today 4/15 and asked if anyone could tell me the status because the website told me very little. I told the girl that I was speaking to that I had received this automated attendant telling me that a part would take 5 to 7 business days more. I asked her if Lenovo kept parts and she said yes but that this part was not in stock. I asked her what the part was and she was able to find that it was the main system board that had to be replaced. I said you have already had the unit for 1 week now at depot repair and never mind the fact that I have been without my computer for 2.5 weeks. She told me that there was nothing she could do and that I had to wait on the part. That is where this case sits at present.
I am very very unimpressed with Lenovo’s service. And furthermore there is no one to talk to about it at Lenovo who gives a care. I really did not know where to air my grievances with how this case is being handled. I thought maybe the forum would be a place. At least others will learn of my dilemma and maybe others have experienced the same thing.
I still like my ThinkPad but the service of Lenovo has become very poor at best. The guy that is my technical manager has had a poor experience of late ordering up some other Lenovo products and he does not want to purchase anymore and these were for new product. They sent the laptop with the wrong software loaded and then said no problem we will send you a new set of disks to load. He refused and said you have to fix this because it was Lenovo’s mistake. It takes time to load software and time is money. I believe we will be leaving the Lenovo field if things continue. I hope and trust that others will not experience the same treatment as I/we have. I wonder if Lenovo will even respond to this post.

I had a real problem with wireless performance on multiple ThinkPads with Win7 until I realized there is a new (or maybe changed implementation) power setting in Win7 which was affecting it.
If you go into Control Panel -> Power Options and click "Change plan settings" for your current power plan.
On the next screen click on "Change advanced power settings"
On the next screen expand "Wireless Adapter Settings" and then "Power Saving Mode"
Make sure it is set to Maximum Performance.
Not sure if this will help your particular problem but hope it does.

Windows 7 hangs when creating a new folder and hangs again when renaming it.

Ok, so I have a problem where Windows 7 hangs when creating a new folder and hangs again when renaming it.
I have documented this problem on my blog here:
Windows 7 hangs when creating a new folder and hangs again when renaming it Rhyous's 127.0.0.1 or ::1
This has my hardware details, etc...
I consider myself an expert at troubleshooting (being in support for over 10 years including time as a Lead Technician doing Windows 2000 support focussing on performance), and have checked quite a few things to try to pinpoint this issue, but I just can't find the cause.
I am asking others if they have seen this issue. I need to know if it is only on my workstation, or if others are seeing it as well.
Have you ever right-clicked, chose new folder and then had to wait 45 seconds for a new folder to appear.
Then the same thing when you try to rename the new folder, a hang of about 45 seconds before the new name take affect.
Anyway, let me know if you have experienced ths.

Hi,
I suggest you temporarily uninstall the antivirus program to check the issue. You need to make sure that you have the installation file to reinstall it later.
If it does not work, I suggest you also test the issue in Safe Mode and Clean Boot to determine if this is a hardware or a software issue.
Good luck!
Arthur Li - MSFT

Windows Pro 8.1 Hyper-V enabled - cannot connect to Virtual Machines

I'm running Windows Pro 8.1. Virtualization is enabled in BIOS. Account is in Admin, Hyper-V, RDP groups. I open Hyper-V manager. Create a new Virtual Switch (internal) and name it. Then create a new virtual machine - name it, place it in a folder under
C:, Specify Generation (tried both 1 and 2), startup memory 512mb not dynamic, Lan- select the virtual switch created earlier, create an vhdx hard disk, and install the O.S. from an ISO on C. Creates the new VM under Virtual Machines.
I select the new VM, click connect, then start. A window opens with the new VM on server and says it's connecting to it and it's status is Running. In the Hyper-V manager in the New Virtual Machine pane (bottom pane) it shows a image that
appears to have a login screen. The VM window that displays the "Connection to" eventually throws an error : Virtual machine connection: Cannot connect to the virtual machine, Try to connect again. contact your admin, Try again etc. selecting connect
eventually errors out with check integration services etc. I've read the logs, there are no errors. When I try to shut down or turn off the vm it doesn't respond. I've configured this before on different boxes. It's the work environment for the MCSA 70-462
training kit Preparation. any direction would be greatly appreciated.

That is correct. This has been well documented.
The WMI namespace changed. 2008 and 2008 R2 now of the v1 virtualization namespace. 2012 knows of both v1 and v2. And 2012 R2 only knows the v2 virtualization namespace.
That said, there is more to this.
2008 management console only knows 2008 features. So if you connect it to a 2012 server to manage the 2012 server, you cannot manage any of the features released with 2008 R2 nor 2012.
So, take this second point, mix it with the first point and I recommend that your management server / client release matches the release of the Server you are managing.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Mac Acrobat X Pro hangs after InDesign CS6 form export but opens in Preview

Anyone else having this issue?

I guess no one can understand this... I just had the worst tech support "chat" form Adobe I have ever had... theu guy started steering me to make an EPS file to distill. That won't help for interactive. I can export to PRINT PDFs. I can export to INTERACTIVE PDFs. Today, for the first time I had to make a form in InDesign CS6 using the new form tools. I can export the file but Acrobat X Pro hangs trying to open it. I just mentioned Preview to say that I CAN open the file in Preview. I'm just trying to eliminate things. I KNOW Preview is not the right tool...

Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

Try making a direct desktop icon for the Editor and see if you can launch the program directly from the desktop.
Right click anywhere on the desktop and select New à Shortcut
Browse to Computer OS C:
And find the PSE Editor application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
C: à Program Files à Adobe à Photoshop Elements 9
Within the Photoshop elements 9 folder find PhotoshopElementsEditor.exe (with the blue icon)
Select that file and click Next.
Then click Finish.
You should now be able to launch by double clicking on the new desktop icon, bypassing the welcome screen.

Cant connect to E4200 v2 2.0.37.131047 from PC Windows Pro 8.1

Hello!
After ugrading Windows Pro 8 to Windows Pro 8.1 , my PC can't connect to my router E4200 v2 2.0.37.131047.
Settings to ip v4 all to auto.
Please help.
PS Sorry for my english, im from Russia.

@ gRanid
Are you using Internet Explorer when accessing your router's page? If yes, what specific version of Internet Explorer are you using? It may be an isolated browser issue and you can opt to download and use other browsers such as Mozilla Firefox or Google Chrome to access the router's user interface. On the browser, you can either use the Linksys Smart Wi-Fi Account URL or the local access link to access the Linksys Smart Wifi tools for the E4200 device.

Will iTunes run on Windows Pro 8?

I am new to Apple products. Just purchased an ipad. I would like to have itunes installed on my laptop. My laptop is running windows pro 8. I am not sure if I can install apple itunes on a windows laptop? Also would I be able to use icloud with windows pro 8 and ipad retina? Thanks!

Welcome to Apple Support Communities
Of course. iTunes works in Windows 8

My start button doesn't work in Windows Pro 8.1

I installed an Windows Pro 8 to 8.1 Pro x64 on a desktop computer. Both were clean installations, no other software was installed. With Window 8.1 Pro, the start button worked for a day after all the updates, then booted the computer. Now, if I try to right
click on the Start button with the mouse; nothing happens. Thinking it was a virus, I used Windows Defender to search to the for a virus and nothing found. No other Windows updates to fix the problem! To me it just another glitch in Windows!
I updated a laptop at the same time with Windows 8 to 8.1 X64, not the Pro version. The laptop was a OEM version of Windows 8. The laptop works fine with Windows 8.1 after upgrading it.

Hi,
Please try to copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
If it doesn't work, please run following command to repair system:
dism /online /cleanup-image /restorehealth
If the issue persists, let's test the issue in New user account.
If all these steps doesn't fix your issue, please capture the actions during this process by using Process Monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to use, please refer to this article:
Using Process Monitor to capture system events
http://www.sophos.com/en-us/support/knowledgebase/119038.aspx
Keep post.
Kate Li
TechNet Community Support

Premiere Pro cc is stalling on startup

My Premiere Pro cc is stalling at startup at Loading ExporterQuickTimeHost.bundle.
Has anyone else seen this problem? Is there a solution?

Hi ralfjons1962,
Thanks for contacting Adobe forums,
Please provide the following infromation
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Regards,
Sandeep

Windows 7 Pro hangs or stalls

Similar Messages

Maybe you are looking for