Windows 7 pro x64 and palm centro

 I'm running windows 7 pro X64 and the software installed just fine, but not the driver.  Does Palm have any plans for a solution?  Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?  
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS.  Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture. 
Palm Inc. has historically not divulged any "future plans" for software (or hardware).   Will a third-party develop a desktop client?  I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64

    GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
    Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data  
    Driver up to date - Sep 2014
    First you need to download and have ready the following softwares:
    Classic Shell V4.1: To get back the Start Button like Windows 7
     http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
    Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
    http://download.lenovo.com/consumer/desktop/h1100174.exe
    Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
    http://download.lenovo.com/consumer/desktop/h1101061.exe
    NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
    http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
    Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
    http://download.lenovo.com/consumer/desktop/h1100842.exe
    Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
     http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
    OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
     http://download.lenovo.com/consumer/desktop/h1100547.exe
    Windows 8.1 x64 Installation DVD and Office 2013 x64
    Follow this procedure for the installation:
    Install Windows 8.1 Pro x64 using the general or personal key
    Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
    Install Office 2013 x64
    Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
    Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
    Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
    Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
    Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
    Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
    Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
    Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in  “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
    Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
    Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
    If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
         Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
                                                                            BTW_12.0.0.9820.zip
         directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
         Windows will not be able to see the device in the “Device Manager”
    Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
    Final, enjoy.
    This guide was creates for me to help peoples like me in this community.

    bump

  • HT1386 Itune 11 on Windows 7 x64 and iPad 2. The device do not appear in Itunes.

    Itune 11 on Windows 7 x64 and iPad 2.
    On 3 different PC and 3 different iPad 2 when I installed iTunes 11.1 Windows Autoplay recognise the iPad but iTunes do not.
    The device does not appear in iTunes and thus neither synchronisation nor backup are possible.
    Reverting to the previous version of iTunes solved the issue.
    However with IOS 7 iTunes 11.1 is required and I am back with the same issue. Could you please help?
    Thanks and best regards

    If you try syncing with iTunes again, perhaps the phantom album will be erased since it does not exist on the computer.
    Have you tried restarting or maybe resetting the iPad to see if the album will disappear?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

    I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

    If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5.  If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version.  Try contacting support using chat and explain your situation to see if they can help.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    If you did purchase 4.4 then that should be sufficient to use to activate 5.
    I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

  • Windows 7 x64 and PDF thumbnails problems

    I have CS5 and Acrobat 9 and under Vista x32 I could see the pdf thumbnails nicely.  Yesterday I installed Windows 7 x64 and now all I can see are the Adobe icons.  I read some other threads that describe opening up the files through acrobat and then changing to either large icon or extra large icon to fix the problem.  This works, but when I go back through windows explorer everyhting is back to just icons.  I have made sure that explorer is set to always view thumbnails and I don't have this problem with anyother file types such as Word documents or image files.  I have also tried rebuilding the installation as anthoer poster had suggested.  Has anyone found a permanent fix for this?
    Thanks,
    Troy
    University of Nebraska - Lincoln
    Department of Chemistry

    Thanks for the link to the fix (by Pretentious Name . com).
    I note that over a year has passed since you posted this solution, and Adobe has still not corrected the problem.
    Problems, errors, and omissions in software are normal and acceptable - what is not acceptable is that Adobe choses to not take action to correct certain problems, especially when the user community identifies both the cause and the solution to the problem.
    The folks at Adobe shoud take a close look at this web page: http://www.pretentiousname.com/adobe_pdf_x64_fix/ - it contains a complete and well-documented description of both the cause of the problem and the solution to the problem.

  • Windows 7 and Palm Centro help needed please

    Can someone recommend an inexpensive blue tooth external adapter that is compatible with Windows 7, 64 bit so that I can sync my Palm Centro?
    Thank you.
    Post relates to: Centro (Verizon)

    dottylibrarian wrote:
    I have the same problem. Had an XP computer. Now have a Windows 7. Installed the software from CD but I'm sure there must be a driver for Win7.   I have a 64-bit computer.  Cradle won't sync.
    The CD that came with these handhelds does not have a 64-bit driver. Neither does Palm Desktop 6.2.2. But the company that took over PalmOS did make one. 
    Read this thread for information on installing the Palm Desktop 64-bit drivers.
    Note: these are 3rd party drivers and not supported by HP.

  • Bootcamp WIndows 7 x64 and Syncmaster 204b external monitor

    Hi,
    I didn't see a sub-forum for external monitors so I hope the Firmware forum is ok since this seems like a drivers/graphics card issue issue.
    The issue I'm having is that Mac OS crashes randomly when I connect my external Samsung Syncmaster 204b monitor to my Macbook Pro when running Windows 7 x64 under Bootcamp. The external monitor turns yellow and the Macbook LCD turns gray and I'm forced to do a hard-reboot. Windows does detect the monitor and I can see it with it's correct name under Windows Display Properties.
    Everything works fine when I run the monitor under Mac OS 10.6.4.
    I'm running Windows 7 x64 on a mid-2010 Macbook Pro 13". I have all of the latest updates installed for Windows and am using Bootcamp 3.1.
    Has anyone encountered a similar issue or have any ideas how this may be resolved?
    Thanks, -Scott
    Message was edited by: Scott Cullen

    Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
    This is what I think happened:
    An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
    I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
    -Scott

  • I've just bought and installed PS elements 13 on Windows 7 x64 and it crashes as soon as it's started (1st run)

    After what I thought was a legit copy of PS Elements 8 expired tonight after a month, I bought PS Elements 13 and installed it on a Windows 7 Pro x64 machine.
    It installed properly, and on first load, it opened the welcome screen, then both Organise and Edit options cause an immediate crash, and everytime since.
    Multiple restarts with no difference.
    Elements 8 removed, no difference.
    Elements 13 removed and reinstalled with no difference.
    How can I find out what's wrong and get this fixed ASAP?
    That, or somehow purchase a PS Elements 8 licence??

    You may have a configuration problem in your network (IP conflict). Are you using DHCP?
    There is also the possibility of some problem with the HP App.
    You should try posting this problem on the HP printer forums. Try here: ePrint, Print Apps, Mobile Printing, and ePrintCenter

  • Driver for Deskjet 1220c (Windows 7 x64 and Windows Server 2008 R2)

    Hi,
    I've got a Deskjet 1220c and have recently upgraded two machines; one to Windows 7 Ultimate x64 and the other to Windows Server 2008 R2.  Any idea where I can get printer drivers? 
    I'd like to try the Vista x64 drivers, though these were included on the Vista CD from MS, and not available as a separate download from HP (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762). 
    I'd be grateful for any suggestions.
    Thanks,
    Mt

    Hi
    I had this trobule too.  Below is the instructions to install driver.  Disconnect your printer. In printers select add printer.  Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port.  Once installed go into printer properites and update to USB port.
    Bingo it works!
    Refer to the below link for full instructions.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
    Good luck
    RB

  • Palx T/X and Palm Centro

    I own a palx T/X which I have no problems with. I am considering purchasing the palm centro smart phone. Will I be able to sync the data and contacts on my computer desk top with the centro without re-entering the info on the phone or setting up another desk top software on my computer? Any info would be helpful.
    Post relates to: Palm TX

    Hi captal and welcome to the palm forums.
    You will be able to have all the info from your TX transferred straight to your centro as long as you sync your new device (the centro) to your existing user name (from your TX).
    Also, of course, make sure to follow the instructions on the link provided above by cygnusX1.
    Post relates to: Tungsten E2

  • Windows 7 x64 and x32 Netlogon 5719 errors

    Ok, let me first start off by saying that this only happens on Windows 7 (x64 or x86).  I do not have this problem with XP (x64 or x86).
    I have several subnets for which I use the HP Procurve IP HELPER-ADDRESS.  This also happens if the DHCP server is a physical or virtual machine.  I was reading about the port fast option for RSTP (HP), though I can see if I need to use that if
    it happens with XP and Windows 7.  I tried the following:
    Disabled IPv6
    Tried a physical and virtual machine
    Ran hotfix 2459530 for both x64 and x32
    Tried the Broadcast registry fix instead of using unicast 
    Tried updating NIC drivers for both Intel and Broadcom
    Changed the gateway for the DHCP options
    Have GPO for "always wait for network before logon"
    Have GPO for "Startup policy wait time (120 seconds)"
    I still run into the issue that some Windows 7 machines will get the Netlogon 5719 errors on startup.  I don't know where to go to next about this issue??  I'm hoping SP2 will help with this issue.

    smKKe wrote:
    Ok, let me first start off by saying that this only happens on
    Windows 7 (x64 or x86).  I do not have this problem with XP (x64 or
    x86).
    I have several subnets for which I use the HP Procurve IP
    HELPER-ADDRESS.  This also happens if the DHCP server is a physical
    or virtual machine.  I was reading about the port fast option for
    RSTP (HP), though I can see if I need to use that if it happens with
    XP and Windows 7.  I tried the following:
    * Disabled IPv6
    * Tried a physical and virtual machine
    * Ran hotfix 2459530 for both x64 and x32
    * Tried the Broadcast registry fix instead of using unicast 
    * Tried updating NIC drivers for both Intel and Broadcom
    * Changed the gateway for the DHCP options
    * Have GPO for "always wait for network before logon"
    * Have GPO for "Startup policy wait time (120 seconds)"
    I still run into the issue that some Windows 7 machines will get the
    Netlogon 5719 errors on startup.  I don't know where to go to next
    about this issue??  I'm hoping SP2 will help with this issue.
    Is this the only error message or do you have other connectivity
    errors, too - like no valid IP-address from dhcp-server, or no dns-name
    resolution working?
    If this is the only error you get and you are able to logon correctly
    and access the domain controller it is only cosmetic and means, that
    netlogon was already trying to access the resource before it was
    available - but it did sucessfully connect later, when the resouce was
    available. If you have other errors as well - please tell us those, too
    - to make troubleshooting easier.
    Wolfgang

  • Win7 Pro x64 and iTunes - poor performance

    Hi all
    I'm running iTunes on Win7 Pro 64bit, and iTunes is terribly slow when I connect either my iPHone 3Gs or my iPad.
    Last night it hung using 14% of the CPU (i7, so plenty of power, far more than iTunes should need) for more than 10 minutes, so I cancelled the sync on my iPad.
    I removed all the Apple software on my PC, and was installing the 64bit version again (same as last time), when I noticed that the installer sees the 64bit version as 32bit. I'm not sure if this is related, but I thought I'd mention it.
    Is anyone else having this problem with 64bit? Any solutions that anyone is aware of?
    Any help appreciated.
    Alex

    That's a blast from the past. (The bulk of my troubleshooting on the nVidia Windows 7 bug was about a year or so ago ... then a lot of PCs started shipping with the hotfix preinstalled and reports of the nVidia chipset thing pretty much died out.)
    Strange though ... although your symptoms are actually more consistent with the nVidia thing than the P55 thing, that particular hotfix only used to affect nVidia chipsets rather than the Intel P55s. I wonder what's going on?
    Ah well ... if it works, it works. Fingers crossed for an end to the trouble.

  • Realtek Audio is not working in Windows 8 x64 and 8.1 x64

    I bought MSI x79 gd 65 mainboard with 4930K i7 and GTx780 1 week ago.
    I downloaded windows 8 and latest bios, chipset and audio drivers: Audio didnt worked. Then i updated 8.1 still not worked.
    I tried to dowload windows 7 its worked but not with 8.
    Then i downloded 8.1 again and i started to try oldest versions like 2.72 - 2.71 they couldnt help too.
    I saw in one forum i was saying "make your realtek driver, windows 7 compatible" I tried and not worked.
    I saw another forum "close your nvidia audio" Not worked :(
    I saw another forum " Download oldest bios" Not worked
    Nearly i tried everything. I dont want to use windows 7. What can i do to fix that latest Realtek audio driver not working. Realtek manager can see my 2+1 sound system when i put the cable also when i test it sound bar moving but no sound. Please help me. I hope i can find solution in there.

    Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
    >>Clear CMOS<<
    Afterwards update the Intel Management Engine Driver in Windows.
    Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

  • In need of a soundcard - windows xp x64 and 4gb

    Hello everybody!
    I?got?a?new?5. surround?system?and?an?Audigy?2?ZS?last week... I was wondering why the sound of the rear speakers was coming out of the front ones. Well after some hours i found out that there exists a bug if you have 4gb?of?ram?or?more. I?tried?out?everything?I?found?on?the?net,?even?at ?least?5?versions?of?Youp-Pax?drivers?couldn't?fix?my?issue. Conclusion?=?resell?Audigy?2?ZS.
    Now?to?my?question?since?my?onboard?sound?isn't?re ally?satisfying. Are?there?any?X-Fi?cards?that?will?work?with?my?windows?xp?x64 system with 4gb ram?(The soundcard should run with original drivers since I'm in need of EAX for gaming)
    System?Configuration:
    Abit'sAB9?Pro?(Mainboard)
    Intel?Core2Duo?,86?Ghz E6300
    Nvidia?GeForce?7950?GT 52 MB
    Onboard?sound?Realtek HD Audio?
    4?GB?DDR2?800
    Windows?XP?x64??
    500 GB raid?5
    Thanks in advance,
    Chrs?

    victor,
    You said 'if the download deosn't work'. Does that mean it didn't work for you?
    What happens when you try to download the updater? You were trying to download the Windows version and not the Mac one?
    You can't buy the cd anywhere, they just come supplied with iPods, and will more than likely contain an out of date software version in any case.

  • Personas suddenly not working Firefox 30, 31, 32 on Win 7 Pro x64 and Linux Mint 16 x64

    Personas which have been working for a long time suddenly quit working on Win 7 and Linux. I tried changing to a different persona to change the background for the top border of the window and it just goes to some odd color and the personas just don't show up. This has been with Firefox 30, 31, 32. The personas still work with Win XP Pro run as a virtual machine on Win 7 host or Win 8 host. I thought it was a Windows thing until I saw the same problem with Linux. Everything else seems normal so this isn't a real bad problem. It's just odd.

    Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *Deselect: [ ] "Always use Private Browsing mode"

Maybe you are looking for