Windows 7 problem on imac27
Hello, I am new here so please bare with me.
I have the imac27 and a windows 7 disk with me, installed windows7 and its a problem.
It would not install properly, although it did reach the windows installation screen when the imac rebooted..but then when the installation process begins, it shuts down automatically...
So I decided to delete the windows7 from my imac hard-drive and now when you start the imac up it wont work unless you hold the 'alt' key...
Its totally new and I just brought it about 4 days ago...
Some key points that may help: I first installed parralel then windows in parralel, I left it like that, then just installed windows using partition...
using 'mac os x 10.6.1' Im downloading the new update now....
Thanks for the help..!
Hi, I don't have an answer for your Win7 installation problem, however...
When you hold down 'alt', does the startup screen give you choices on which disk to boot from? If so, I'm guessing that until you figure out how to solve that installation problem, if you use Bootcamp Assistant to undo the partitioning and create just one single drive again, that might solve your startup problems (there would then only be one drive that the computer could start up from).
You could then later try partitioning the drive with Bootcamp again and start over.
If you completed erased and formatted that Windows 7 partition, though, I don't know why you would need to hold down 'alt' to get the computer to start...
Similar Messages
-
Installing Windows 7 on IMac27 mi-2011 runing OSX 10.8.2
Installing Windows 7 on IMac27 mi-2011 runing OSX 10.8.2, just re-installed (clean MAC).
Starting bootcamp, creating the partition with the Windows DVD. Once the partition is created.
The Mac restart and white screen appear and nothing else happen. Any suggestion ?
Thank youBoot camp installaton guide:
http://manuals.info.apple.com/en/boot_camp_install-setup_10.7.pdf
Install Windows7 on Macbook air from a USB drive
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/ -
computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do
Which computer? Which Windows?
What are you trying to do?
-Jerry -
Dear Friends,
We are giving print from Citrix. BUt the print iis giving me following problem.
Please suggest on the same.
(6:14:29 PM) Number of processors: 2
(6:14:29 PM) Icon DLL loaded.
(6:14:29 PM)
(6:14:29 PM) Network Communication via SAP-NiLib
(6:14:29 PM) Hostname: THMUMGDCCTX02
(6:14:29 PM) IP Address: 16348016.2673954.2011564330.1225156
(6:14:29 PM)
(6:14:29 PM) SAPLPD Version 6.29 for Windows/NT (OPT) is listening
(6:14:29 PM) OS-Info: version = 5.2, build = 0/3790, text = Service Pack 2
(6:14:29 PM) Copyright © 1992-2001 SAP AG
(6:14:29 PM)
(6:14:39 PM)
(6:14:39 PM) Receive job for printer BKC_7thFlr_HPColor3800 on THMUMGDCPS01 (from BKCDT (Berkeley LPD protocol / RFC1179)
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:40 PM) send_status called
(6:14:40 PM) Job 000001723200001.PRD for user ATINJ queued.
(6:14:40 PM) Start printing job 000001723200001.PRD on printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT
(6:14:40 PM) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
(6:14:40 PM) Error: The printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT is unknown to Windows Print Manager.
(6:14:40 PM) The following printers are currently defined:
(6:14:40 PM) Printer = BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT XPS DOCUMENT WRITER (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
regards
JiggiHi,
You are getting the error because the printer name is greater than 40 characters.
The SAPLPD can only recognize printer names with 40 characters or less.
From the log, i believe you are using the printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
but the SAPLPD is recognizing only till BKC_7thFlr_HPColor3800 on THMUMGDCPS01.
Try to change the printer name .. it will work -
(12:58:18 PM) Number of processors: 4
(12:58:18 PM) Icon DLL loaded.
(12:58:18 PM)
(12:58:18 PM) Network Communication via SAP-NiLib
(12:58:18 PM) Hostname: WLRERW092
(12:58:18 PM) IP Address: 33405096.2097184.8388736.1616984
(12:58:18 PM)
(12:58:18 PM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
(12:58:18 PM) OS-Info: version = 6.1, build = 0/7601, text = Service Pack 1
(12:58:18 PM) Copyright © 1992-2001 SAP AG
(12:58:18 PM)
(12:58:29 PM)
(12:58:29 PM) Receive job for printer \\192.168.207.56\ULR_ZM400_HFW05 (Berkeley LPD protocol / RFC1179)
(12:58:29 PM) send_status called
(12:58:29 PM) send_status called
(12:58:31 PM) send_status called
(12:58:31 PM) send_status called
(12:58:32 PM) send_status called
(12:58:33 PM) Job 000NJJ3Z.WBP for user LR70343 queued.
(12:58:33 PM) Job 000NJJ3Z.WBP (raw) started on printer \\192.168.207.56\ULR_ZM400_HFW05
(12:58:46 PM) Error: The printer \\192.168.207.56\ULR_ZM400_HFW05 is unknown to Windows Print Manager.
(12:58:46 PM) The following printers are currently defined:
(12:58:46 PM) Printer = SEND TO ONENOTE 2010
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = PDF COMPLETE
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = MICROSOFT XPS DOCUMENT WRITER
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = HP EPRINT
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = FAX
(12:58:46 PM) Printer = ADOBE PDF
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = \\192.168.207.21\SHARP MX-4111N PCL6
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.208.21\SHARP MX-4111N WELSPUN 2
(12:58:47 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW05
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW06
(12:58:47 PM) Cannot do OpenPrinter \\192.168.207.56\ULR_ZM400_HFW05. Text = The operation completed successfully.(12:58:47 PM) Error: BG: printfile failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
please help
Regards
selvakumarApparently our Sandbox system didn't have a Spool server configured. That's why the error. It works perfectly in other systems.
The output device's Host Printer must be defined on the spool server for saplpd to recognize. Otherwise you see an error. -
Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. GermainGlen,
Thank you for the prompt reply.
We have already done what you suggested (My explanation was not very
clear ... sorry) to no avail.
Any more takers and/or ideas anyone?
Thanks,
Sean
-----Original Message-----
From: Glen A. Whitbeck [SMTP:[email protected]]
Sent: Monday, January 26, 1998 2:47 PM
To: GERMAIN Sean
Cc: 'Forte Users Group'
Subject: Re: Nested Window Problem
You may need to dynamically tell the child window what its parent is (such
as a named grid that exists on the parent window). Setting the child
window to size to its parent should work once the child window knows who
its parent is. You should be able to put your window into that grid at
specified row and column coordinates. To reset the parent and position a
widget in a grid, you do something like the following:
<Widget>.Parent = NIL;
<Widget>.Row = 1;
<Widget>.Column = 1;
<Widget>.Parent = <TargetGrid>;
I believe that you should be able to do the same thing for a window, too
(using "Self.Window" instead of "<Widget>").
Glen
GERMAIN Sean wrote:
Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. Germain<< File: vcard.vcf >> -
Running Worldcraft with Wine (or OpenGL in child window problem)
Hi!, I'm trying to run Worldcraft (the Half life map editing tool) with wine (version 0.9.30), everything works fine except when I choose to display a 3D view on one of the viewports (3D views uses OpenGL to render the scene), when I do this, the whole window turns black, and flickers (showing some portion of the original window) when I hit the mouse button of move the window.
This seems to be the Opengl in child window problem that was supposedly fixed in wine 0.9.28, but, well.. it happens This happens also with Lightwave 8.0.
Can anyone try and see if this happens to you as well? or.. well. does anybody knows how to fix it?
thanks a lot!
silencerThanks Nephastos, but I'm trying to run Worldcraft, not Warcraft Worldcraft is a world editing tool for Half-Life.
I uploaded it to my server if anyone would like to try and see if it works for you (as it is an issue that should be solved by now, I think), you can download it from http://www.darkdesigns.com.ar/worldcraft3.exe
Thanks a lot
silencer -
Failure to search - query window problem
Hello again,
Have anyone of you came across a problem with SAP search mechanism in query window attached to document field? I've created a simple query of "Select acctcode,acctname from OACT where acctcode like '2%' and postable='Y' order by acctcode" and attached it to one of document fields (doesn't matter which one). When I run this query a usual window poped up with a search field on the top, but when I typed "2" in it, selection bar moved right into first 231 account ignoring any of the lesser numbers. There is more - when I changed query to search for '5%' like accounts, I gained the same result - accounts less than 530 were ignored even if I typed "50" or "51". BUT - when I changed query sort order to "desc", all account became "findable".
I got this problem in one database only which is SAP 8.8 PL10 version upgraded recently from 2007A one. I've checked with a newly created 8.8 and such problem hasn't occured.Hello Thomasz,
I might be off base here, what happens when you use this???
Do you get the same types of query window problem???
Select
acctcode,
acctname,
segment_0
from OACT
where Segment_0 like '2%'
order by acctcode
for browse
Regards,
Zal -
[iPhoto] Assertion failure/Modal window problem
I've been trying to order prints through iPhoto (6.0.6) but when I hit the "Order prints" button nothing happens. I get the following error in the Console log. It seems as though iPhoto is trying to spawn a new window (which makes sense) and can't.
I've reinstalled iPhoto, rebooted, etc. but keep getting same problem.
2007-10-08 22:07:27.616 iPhoto[589] * Assertion failure in -[ExtendedApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], AppKit.subproj/NSApplication.m:3057
2007-10-08 22:07:27.617 iPhoto[589] Modal session requires modal windowI found this discussion. I could not access the discussion link. Under the instructions, I didn't understand what "rm files and directories" means ... perhaps "remove"????
Help
"After a ran steps to fix the problem of Safari giving "localized string not found" messages, the "modal session requires modal window" problem went away.
Here is a link to the post.
http://discussions.info.apple.com/[email protected]
The instructions are to:
1. Download lastest version of Safari
2. rm files and directories in /System/Library/Frameworks/WebKit.frameworks
3. Install Safari again
4. Run permissions repair in Disk Utility" -
My playlist has dissapeared itune issue or windows problem?
My playlist has dissapeared from libraray itunes issue or windows problem?
Hi,
It's pointless to use that ammount of ram under Win9x/Me as it will be slower then if you use only 256MB witch is the optimal ammount for these OS'ses.
So you better take 256 out or move to Win2000/XP.... -
Closing previous windows problem
i have one desktop gui application..when I compile my application,then i can see searchform1 form,then when i click DELETE button in searchform1.form then I do see Delete.form and i can the remove the file from the list that i selected.The problem is when i click delete button i can see deleteform again BUT I could not close the previous windows like searchform1.java window and previous delete.java window(or form) which I have seen before .I wanna close previous window when i click delete.form..I meant i wanna close searchform1.form or the previous windows (forms) when i see delete.form or when I click delete button. I do believe that because of that problem , I had seen " Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space " after I saw a couple of forms.
Thank you so much for your helps..altayli wrote:
This is my codeThat is not an SSCCE. Please read [this link|http://sscce.org].
But judging from that snippet, you're creating a new "noresult" (which I assume is a JWindow or JFrame?), then immediately disposing of it, without even displaying it. This is NOT closing any previously-opened noresult instances, which I am starting to think is what you want to do. You need a reference to a previous noresult if you want to close it.
Also, you shouldn't be calling DesktopApplication2.main(), this is very bad practice. You likely want to call DesktopApplication2's constructor if it is a JFrame/JDialog subclass, and setVisible(true) the result; if it's not a JFrame or JDialog, you want to create whatever main window it does create, and display that.
What if DesktopApplication2 calls System.exit() somewhere? Your application would go down with it. -
How I fixed my iPod not seen in windows problem
This seems to be a recurring question. I was having lockup problems when trying to either update or attach iTunes to my 60 GB iPod photo. I have a windows pc running XP Pro with all the latest updates. I had the problems on iTunes 5 and the latest 6.0. I also have the latest system software (1.2) on the iPod. I observed that the problems seem to occur as soon as I had put a substantial number of songs on the iPod. I have antivirus software but determined that was not the problem since excluding the iPod for scanning and totally disabling the software did not help. I am using USB 2.0 ports for my iPod and not FireWire.
What I did that seems to have fixed the problem was to disable the power save option for the USB ports in windows. I suspect that while iTunes is cranking away trying to figure out what to do with the thousands of songs in my library, the USB port is unused enough to put it into power save mode. I could be wrong but when I disabled this feature in windows I found it immediately fixed the problem and I have not had any problems with my iPod on this computer since. Here is what to do on XP:
Go to the control panel and pull up the System control.
Get into the Hardware panel.
Go to Device Manager.
Find the Universal Serial Bus Controllers device and open it up.
You will see devices called USB root hub 2.0 and USB root hub.
Double click on them to open up the devices and get to the Power Management tab.
Disable the power save feature for them and press OK.
That should be all you need to do.
One other useful thing in power management is to see the total current drain of each of the devices on the USB ports in use. Make sure that you don't have devices on there that exceed the 500 mA that the ports can source. One iPod alone is not going to be a problem but it is worth checking if you have multiple devices on there. The power management screen on the PC will tell you what the load is from each device.
The other critical thing I found was to make sure that your iPod is charged up before you try a big update. The battery can drain in the middle of a large sync and that causes havoc because the USB port is not a battery charger even though it supplies power to the iPod.
I hope this helps. It sure helped me.One other useful thing in power management is to see the total current drain of each of the devices on the USB ports in use. Make sure that you don't have devices on there that exceed the 500 mA that the ports can source.
This is a good point. USB ports are very limited in the amount of power they can supply to a device. Since the iPod is charging a rather large battery from this power, it's well worth the trouble to give the iPod it's own USB connection, one that is not shared with any other devices. Really, this isn't iPod specific, it goes for anything that's charging from the USB port. -
Install of apps 11.5.8 on Windows - Problems with PreReqs
Hello all,
I've worked with Oracle database server for years,
and installed it many times. I want to learn Oracle apps,
and I'm attempting the install of 11.5.8 on Windows
from the CDs. But I'm having some problems with the
pre requisites.
Unlike LInux, if the install doesn't work, you can't
clean out all traces of the install. I've completely
reinstalled Windows to start fresh this last time.
Although, with the pre req warnings, I didn't attempt
the install.
Here is what I did.
Copy the CDs.
Rapidwiz
install Oracle apps
Single Node
TEST. Fresh database.
Component apps licensing
Choose all of:
Marketing
Sales
Order Management
Financials
no particular country
WE8ISO8859P1 - Western European
- for database, and appl_top character set.
The computer name is called Green.
C:\OAppsInstall\redCD\Disk1\rapidwiz>ping green
Pinging green [127.0.0.1] with 32 bytes of data:
Set
appl_top
c:\oapps11\testappl
common_top
c:\oapps11\testcomm
etc.
NTUSER: oracleapps
pw: ???
DNS Domain Name: green
These next directories are default, but do not exist:
MKS Directory C:\mksnt
MSDEV Directory C:\VC98
External JDK C:\java\jdk1.3.1
OUI Inventory Path c:\Program Files\Oracle\Inventory
It does a port availability check.
- the ports are all fine.
And checks the pre-requisites.
These three have problems:
Host/Domain Check
running command : ping -n 1 localhost
Pinging green [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
running command : ping -n 1 localhost.green
Ping request could not find host localhost.green. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
System Utilities Check
running command : cmd.exe /c C:\OAppsInstall\redCD\Disk1\rapidwiz\bin\checkutil.cmd C:\mksnt C:\VC98
C:\OAppsInstall\redCD\Disk1\rapidwiz>echo off
'which' command is not available. Check MKS installation.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1
JDK Availability Check
running command : CheckerClass.JDKCheck()
JDK Directory Does not exist, Input was - C:\java\jdk1.3.1
Error - JDK Availability Test has returned an error: 1
I check the PDF install doc:
Step 2: Install Latest Java Development Kit (JDK)This release of Oracle Applications requires Java Development Kit (JDK) 1.3 or
higher. Before you begin your installation, download and install the latest version of
JDK on your concurrent server, administration server, forms server, and web server.
Download JDK 1.3 from the download site for the operating system where you will
deploy the Oracle HTTP server. See OracleMetaLink document 130091.1 (Upgrading
to JDK 1.3 with Oracle Applications 11i) for a list of the sites.
1. Follow the installation instructions provided with the download.
2. Make a note of the location where you install JDK. The Rapid Install wizard
asks for this location on the Derived Settings screen. (See Step 8 on page 2-14 or
Step 9 on page 3-16.)
MSDEV Directory (Windows)
Location of the Visual C/C++ executables and .DLL files. Used for linking application executables or .DLLs.
MKS Directory (Windows) MKS tools must be added in the PATH so that executables can be used to
relink application executables and .DLLs.Finally the Questions:
I've been looking at other threads.
Oracle E-Business Suite R12 Installation Steps on Windows XP
1)
For this older 11.5.8 version, do I need to install the JDK, or will
this be done for me? If I do need to install the JDK, can I use the
latest version??
2)
Do I really need to install MS Visual C++ ?????
If so, could I use the latest .NET express instead??
3)
What is the MKS? The one thing the docs say is:
MKS Directory (Windows) MKS tools must be added in the PATH so that executables can be used to
relink application executables and .DLLs.Do I just need to create an "MKS" directory, and add it to the path?
Or, do I need to install some other software??
I've tried installing this a few times over the past few years, and
while I've had different levels of success, I've always had some kind
of issue after the install was done.
I really want to learn form and reports, so I hope that you guys
can help me out on this so I finally get a clean install.
Thanks a lot!Thanks.
Ok, I bought VC++ and installed it.
And, installed: j2sdk1.4.2_10
I could:
C:\> copy gawk.exe awk.exe (answer yes to copy over existing file)
C:\> copy grep.exe egrep.exe
However, I couldn't:
C:\> copy make.exe gnumake.exe
C:\> copy gcc.exe cc.exe
- because there are no such files in cygwin.
$ pwd
/usr
$ find . -type f 2>/dev/null | grep -i gcc
- nothing
$ apropos make
indxbib (1) - make inverted index for bibliographic databases
ln (1) - make links between files
makeinfo (1) - translate Texinfo documents
makewhatis (8) - Create the whatis database
mkdir (1) - make directories
mkfifo (1) - make FIFOs (named pipes)
mknod (1) - make block or character special files
mktemp (1) - make temporary filename (unique)
OracleApps@green /usr
$ find . -type f 2>/dev/null | grep -i make
./bin/makeinfo.exe
./sbin/makewhatis
./share/groff/1.18.1/font/devdvi/generate/Makefile
./share/groff/1.18.1/font/devlj4/generate/Makefile
./share/groff/1.18.1/font/devps/generate/Makefile
./share/man/el/man8/makewhatis.8
./share/man/it/man8/makewhatis.8
./share/man/man1/makeinfo.1
./share/man/man8/makewhatis.8
./share/man/ro/man8/makewhatis.8
System Utilities Check
running command : cmd.exe /c C:\OAppsInstall\redCD\Disk1\rapidwiz\bin\checkutil.cmd C:\cygwin\bin "C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin"
C:\OAppsInstall\redCD\Disk1\rapidwiz>echo off
'which' command is available.
'gnumake' is not available.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1
Where do I get gcc and make from??
Thanks a lot! -
Acrobat 9: IAC window problem when opening a pdf
Hello,
I got a C# program , which can iterate over a number of pdf files in a directory. I used the following code for the first document:
CAcroApp AcrobatApp = new AcroAppClass();
AVDoc = new AcroAVDocClass();
AVDoc.Open(filename1,"");
AcrobatApp.Show();
So far so good. Acrobat starts and shows the loaded document. The Code for stepping to the next document is:
AVDoc.Close(0)
AVDoc.Open(filename2,"");
The document is closed and the empty Acrobat window stays (same as if you open a PDF in Acrobat 9 and then select "File|Close" from the menu). Instead of using this empty frame the next "AVDoc.Open.." a new window is created for the next document.
Can I somehow tell Acrobat to open the new document in the "empty" Acrobat window instead of opening a new one?
(Might be a SDI problem of Acrobat 9, since the code worked well for all older versions of Acrobat using the MDI interface)
Thanks a lot,
RenéHi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4 Installation Workflows — Enterprise Administration Guide
Regards,
Rave -
UTF-8, Unicode, XML and windows problems
Hi there,
I'm developing an application which uses a lot of russian text.
This russian text is stored in XML and can be sent to a server remotly
I use the standard javax.xml libaries to parse the xml files and DBunits XMLWriter to write generate XML strings.
The XML returned by the DBunit stuff is UTF-8, but its inside a UTF-16 string.
So when I generate xml and print it out I get something that looks like the following:
��������� ������������ ���������?����Thats ok, beacause I can stick that streight into a file when writing files and it works.
But the problem comes when sending the XML over the server.
The sending implentation I use must be able to send java generated utf-16 and xml read utf-8.
So I convert the XML from utf-8 to utf-16, using the following:
byte[] stringBytesISO = isoString.getBytes("ISO-8859-1");
utf8String = new String(stringBytesISO, "UTF-8");And that works perfectly on my linux system.
However when I run it on windows, it only seems to convert some of the characters
Привычным �?ном за�?нут дороги до ве�?ны,Does anyone know whats going wrong here?jammers1987 wrote:
I use the standard javax.xml libaries to parse the xml files and DBunits XMLWriter to write generate XML strings.DbUnit is a testing tool; are you saying you're using it in a production system? Ideally, you should use the same library to write the XML as you do to read it, but you definitely shouldn't be using DbUnit in this context.
The XML returned by the DBunit stuff is UTF-8, but its inside a UTF-16 string. That should never happen. XML is just text, and text can either be in the form of a Java string, or it can be stored externally using a text encoding like UTF-8. Never mind that Java strings use the UTF-16 encoding; you don't need to know or mention that. Encodings only come into play when you're communicating with something outside your program, like a file system or a database.
When you generate the XML, you specify that the encoding is UTF-8. When you read the XML, you specify that the encoding is UTF-8. That's all.
Maybe you are looking for
-
How do you add visual video controls to widget video in ibooks author?
How do you add video controls to video using ibooks author?
-
Iphoto won't import photos from my camera
My hard drive crashed about 2 months ago and I had a new one installed. It worked great for the first month but then began importing my photos very slowly and now has stopped. It will still import/snyc from my iphone but has since, stopped importing
-
Wow - three days of spinning clock!
OK, I took the advice of experts on this board and kept my Mac on all night and sure enough, at some point, it stopped with the "Preparing Backup..." nonsense and actually backed up my drive! But that was three days ago, almost four now, and now I ca
-
DW CS4 acting screwy now - inserted links no longer site relative...
I'm using DW CS4 on Win 7 and it was working great for a while, but now it's going haywire. Everytime I try to use the little target icon (or any insert method other than manually typing) to link to a document it is inserting local system level full
-
How can I un-install the Trial software?
There is a glitch in the trial software I have been using, so I would prefer to un-install it and then buy the software for a fresh install. How do I make sure all the associated files are removed?