Windows 7 Professional Pack configuration on SBS 2011 Essentials for Win 7 client after recovering a faulty system drive
I had a system drive fail on a PC the other day (Seagate Barracudas seem to do this!) and have replaced it with an SSD. Sadly its capacity is less than the original system partition on the failed drive so a bare metal restore does not work. I have
therefore reinstalled Windows 7 Pro and configured the PC with the same name.
In the dashboard of the server Windows 7 Pro Pack is implemented, but it is not functioning on the client. I have re-configured it but still no joy. I cannot see a way to disable W7PP for the client without removing the Add-in and assume this is a problem
relating to using the same name for the computer. Should I remove the Add-in and reinstall or is there an alternative?
TIA
Andrew
Here it is. I have replaced the user, client, domain and server names.
Thanks for your help. I am tempted to just remove the client from the domain, change the PC name and rejoin.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
===================================
RSOP data for [DomainName]\xxxxxxxxxxxx on [PCName] : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\xxxxxxxxxxxx
Connected over a slow link?: No
COMPUTER SETTINGS
CN=[PCName],CN=Computers,DC=[DomainName],DC=local
Last time Group Policy was applied: 22/01/2015 at 09:39:11
Group Policy was applied from: [ServerName].[DomainName].local
Group Policy slow link threshold: 500 kbps
Domain Name: [DomainName]
Domain Type: Windows 2000
Applied Group Policy Objects
Default Domain Policy
W7PVP Security Templates
The following GPOs were not applied because they were filtered out
W7PVP Folder Redirection
Filtering: Disabled (GPO)
Local Group Policy
Filtering: Not Applied (Empty)
W7PVP Folder Redirection
Filtering: Disabled (GPO)
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
[PCName]$
Domain Computers
System Mandatory Level
USER SETTINGS
CN=xxxxxxxxxxxx,CN=Users,DC=[DomainName],DC=local
Last time Group Policy was applied: 22/01/2015 at 09:39:27
Group Policy was applied from: [ServerName].[DomainName].local
Group Policy slow link threshold: 500 kbps
Domain Name: [DomainName]
Domain Type: Windows 2000
Applied Group Policy Objects
W7PVP Folder Redirection
W7PVP Folder Redirection
The following GPOs were not applied because they were filtered out
Default Domain Policy
Filtering: Not Applied (Empty)
Local Group Policy
Filtering: Not Applied (Empty)
W7PVP Security Templates
Filtering: Disabled (GPO)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
RA_AllowComputerAccess
WSSUsers
RA_AllowAddInAccess
RA_AllowShareAccess
RA_AllowRemoteAccess
RA_AllowNetworkAlertAccess
RA_AllowHomePageLinks
High Mandatory Level
C:\Windows\system32>
Andrew
Similar Messages
-
Step by step to disable Folder Redirection for a single user - Windows 7 and SBS 2011 Essentials
OK...I got chewed (by someone I have a lot of respect for) for pounding on an old thread, so I'm starting a new one. I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is
exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete answers. If you don't have time to give me the 'For Dummies' version, don't bother. Sorry, but I've done all the Googling I can stand for one day
and I'm over it! (and a little grumpy)
Thanks in advance!
Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP... I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete
answers....
Hi Wayne,
Here's what I'd do.
1) create a Security Group in your AD environment. Call it 'Folder Redirection Members' or something like that. Put all the user accounts in your AD environment who you want to have their folders continue to be redirected to the server, do not include the
one user who you wish to exclude. in other words, you're going to use a specific security group to target the Folder Redirection policy (right now, it's Domain Users, which is everyone).
2) Edit the Group Policy that the W7PP created in your AD environment. It's likely called "W7PVP Folder Redirection". Start with verification under the Settings tab, expand Folder Redirection beneath User Configuration states that
Policy Removal Behaviouris set to Restore Contents. Then proceed using the Editor, to make adjustments under the Scope tab; verify membership in Security Filtering. Remove Domain Users,
add in Folder Redirection Members (or whatever you named your group in step 1).
3) on your workstation that your user you are applying the change to disable folder redirection, Log on to the domain account while connected to your network, elevate a command prompt, and perform a 'gpupdate /force' command and then reboot your computer.
Folder redirection configuration should be removed from the system and redirected contents should be restored back to your local path. Verify with inspection of the My Documents or other folders.
Hope this helps. Keep in mind, no warranty implied or expressed in this advice.
Try not to be so darn grumpy. :-/
Jason Miller B.Comm (Hons), MCSA:Win7, MCITP, Microsoft MVP -
Windows 8.1 Client Support on SBS 2011 Essentials
Does anyone know if Windows 8.1 Client PC's are supported or will be (with a forthcoming Update Roll-up) on a SBS 2011 Essentials network?
By asking that i mean full support by using the Server Dashboard to manage it and setting up Backup and redirection policies....
ThanksHi,
Sorry for my mistakes.
As I know, it seems there is no Microsoft articles that indicate Win8.1 Pro supported
under Dashboard management of Small Business Server 2011 Essentials. You can contact Microsoft Customer Service, I believe that you will get an accurate response there.
Microsoft Customer Service
http://support.microsoft.com/gp/contact_microsoft_customer_serv?&fr=1&wa=wsignin1.0
Hope this helps.
Best regards,
Justin Gu -
Install stuck: SBS 2011 Essentials on a Virtual Box
I’m trying to do a test install of SBS 2011 Essentials on a Virtual Box virtual machine running on a Win7 64-bit machine. I put the install partition on an external
drive.
The install stops on a window that is titled Installing Windows. The screens says: “There was a problem during the installation. To restart the installation
click Restart. You can also view the installation error logs.”
When I open those installation error logs, I see no error. (It does have Info and Warning lines.)
I’m stuck there. If I could paste in the the contents of the error logs I would, but I can’t copy from the VM until there is an installed OS.
Any help appreciated.Hello Rob,
There may still be a problem with two things.'
1) Installing it on your external hard drive. If it is a 'usb' drive, then it seems at times the software\drivers still causes some type of conflict depending on what type of system you have.
2) Your network interface card is configured set.
Going off the assumption that you have the latest virtual box software, your problem may be point number '1'
Solution that works for some: Installed the virtual machine locally. (Remember, you can still set the disk dynamically to 160 whether you have the space locally or not) Then transfered it to an external drive after everything was installed and
working.
Caveat: Shame to say, you may not have local storage large enough to hold the vm. This is why you probably bought the external drive in the first place. Hope this helps. Just find a machine that will allow you to create the vm locally first
if you can.
James -
I am trying to connect a Windows 7x64 Pro client to a Windows Server 2011 Essentials server. The connector starts fine,then it gives this error: "Your server cannot be located. Enter your server's name or IP address to proceed"
I can ping the server just fine.
So far I have verified
- SSL certificate is the same as the server’s computer name.
- IPV6 is disabled on client
- Manaully Set DNS to 172.16.1.10 ( server Static IP)
Any help would greatly be appreciated.
https://172.16.1.10:65515/Connect
Here are my connector log files:
[03/31/2014 22:00:39 15b8] --------------------------------------------------------------------------------------------------
[03/31/2014 22:00:39 15b8] wmain: Start of Computerconnector
[03/31/2014 22:00:39 15b8] wmain: Calling Computerconnector::ShowWizard()
[03/31/2014 22:00:39 15b8] CComputerconnector::ShowWizard: Initializing common controls
[03/31/2014 22:00:39 15b8] CComputerconnector::ShowWizard: Done initializing common controls
[03/31/2014 22:00:39 15b8] Displaying the wizard
[03/31/2014 22:00:39 15b8] CComputerconnector::ConnecttingDlgProc: IDD_CONNECTING Page Initialization
[03/31/2014 22:00:39 db0] GlobalData::Initialize (172.16.1.10, 65510, C:\Users\tuttle.SGM\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5LMTU86Q\ComputerConnector(172.16.1.10).exe, 1033)
[03/31/2014 22:00:39 db0] ExpandEnvironmentStrings return (C:\Windows\Temp\Client Deployment Files\)
[03/31/2014 22:00:39 db0] CComputerconnector::Run: Running Task: Id=1 Description=Downloads the Setup.cab file
[03/31/2014 22:00:39 db0] NetworkUtil::DownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:39 db0] NetworkUtil::DownloadFile - Create directory [C:\Users\tuttle.SGM\AppData\Local\Temp] if not exist.
[03/31/2014 22:00:39 db0] NetworkUtil::_WinInetDownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:41 db0] InternetOpenUrl (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033) returns 12029
[03/31/2014 22:00:41 db0] _WinInetDownloadFile returns 0x80072efd.
[03/31/2014 22:00:41 db0] NetworkUtil::DownloadFile(HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab) failed with hr = 0x80072efd.
[03/31/2014 22:00:41 db0] CComputerconnector::Run: Task: Id=1 Failed
[03/31/2014 22:00:41 15b8] CComputerconnector::ServerDlgProc: IDD_SERVER Page Initialization
[03/31/2014 22:00:52 103c] GlobalData::Initialize (172.16.1.10, 65510, C:\Users\tuttle.SGM\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5LMTU86Q\ComputerConnector(172.16.1.10).exe, 1033)
[03/31/2014 22:00:52 103c] ExpandEnvironmentStrings return (C:\Windows\Temp\Client Deployment Files\)
[03/31/2014 22:00:52 103c] CComputerconnector::Run: Running Task: Id=1 Description=Downloads the Setup.cab file
[03/31/2014 22:00:52 103c] NetworkUtil::DownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:52 103c] NetworkUtil::DownloadFile - Create directory [C:\Users\tuttle.SGM\AppData\Local\Temp] if not exist.
[03/31/2014 22:00:52 103c] NetworkUtil::_WinInetDownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:54 103c] InternetOpenUrl (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033) returns 12029
[03/31/2014 22:00:54 103c] _WinInetDownloadFile returns 0x80072efd.
[03/31/2014 22:00:54 103c] NetworkUtil::DownloadFile(HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab) failed with hr = 0x80072efd.
[03/31/2014 22:00:54 103c] CComputerconnector::Run: Task: Id=1 Failed
[03/31/2014 22:00:55 15b8] wmain: End of Computerconnector: hr=0x0Please run this script on your server, it should help to diagnose any issues with IIS.
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
You will need to set your PowerShell execution policy to remotesigned.
http://technet.microsoft.com/en-us/library/ee176961.aspx
Usually this error is due to an SSL Cert not being assigned to the 'WSS Certificate Service Web Site'
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
SBS 2011 Standard SP1 - Randomly rebooting after svchost crash
Last week 10/22, my SBS 2011 server began restarting randomly anywhere from every 2 hours to as long as every 4 hours. In reviewing the logs, it appears that an svchost process crashes (in Application log) which surrounds ntdll.dll and then many services
crash and the System log shows a request by RPC to restart the server.
I have seen similar threads but none of them end up with a solution or viable suggestion.
No changes were made to the server on that day but since this began, I have installed all updates to drivers and the OS but no change.
Log Name: Application
Source: Application Error
Date: 10/29/2014 1:30:45 PM
Event ID: 1000
Task Category: Application Crashing Events
Level: Error
Keywords: Classic
User: N/A
Computer: SERVER.domain.local
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.18229, time stamp: 0x51fb164a
Exception code: 0xc0000005
Fault offset: 0x00000000000506f1
Faulting process id: 0x2a0
Faulting application start time: 0x01cff38404ccfa2d
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: b1d8e3b5-5f99-11e4-8531-e83935b894d8
Event Xml:
<Event xmlns="removed because wouldn't let me save">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-29T18:30:45.000000000Z" />
<EventRecordID>3836089</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER.domain.local</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.18229</Data>
<Data>51fb164a</Data>
<Data>c0000005</Data>
<Data>00000000000506f1</Data>
<Data>2a0</Data>
<Data>01cff38404ccfa2d</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>b1d8e3b5-5f99-11e4-8531-e83935b894d8</Data>
</EventData>
</Event>
Log Name: System
Source: USER32
Date: 10/29/2014 1:30:46 PM
Event ID: 1074
Task Category: None
Level: Information
Keywords: Classic
User: SYSTEM
Computer: SERVER.domain.local
Description:
The process C:\Windows\system32\services.exe (SERVER) has initiated the restart of computer SERVER on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x30006
Shutdown Type: restart
Comment: Windows must now restart because the Remote Procedure Call (RPC) service terminated unexpectedly
Event Xml:
<Event xmlns="removed because wouldn't let me save">
<System>
<Provider Name="USER32" />
<EventID Qualifiers="32768">1074</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-29T18:30:46.000000000Z" />
<EventRecordID>2726522</EventRecordID>
<Channel>System</Channel>
<Computer>SERVER.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>C:\Windows\system32\services.exe (SERVER)</Data>
<Data>SERVER</Data>
<Data>No title for this reason could be found</Data>
<Data>0x30006</Data>
<Data>restart</Data>
<Data>Windows must now restart because the Remote Procedure Call (RPC) service terminated unexpectedly</Data>
<Data>NT AUTHORITY\SYSTEM</Data>
<Binary>06000300000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>Hi John,
Before going further, would you please let me confirm whether do any change (install any update or third-party
application) before this issue occurred?
On current situation, please run
sfc /scannow command to scan all protected system files. Would you please let me know whether you updated the BIOS and the hardware drivers? Please check if drivers need to be updated and Windows Updates need to be installed. If possible, please perform
a clean boot and check if this crash issue still exists.
In addition, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if can help you to analyze dump files.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it may be not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu -
SBS 2011 GPO for changing the default save path applying to Win7 but not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
Thanks in advance.When a group policy is not applying, it is often that it has been linked to the wrong OU. Please first check this.
You might also check the apply status on the client site based on the GPSVC.log.
How to enable GPO logging:
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
It looks more like an issue on server side than an issue of Office Group Policy settings. Try to post in Server forum and see if there is any luck:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver -
SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS CSE Policy
Windows SBS Client - Windows Vista Policy
Windows SBS Client Policy
Update Services Client Computers Policy
C-Create Syntiro Root Folders
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
Windows SBS Client - Windows XP Policy
Filtering: Denied (WMI Filter)
WMI Filter: Windows SBS Client - Windows XP
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
OPTI9020-01$
Domain Computers
System Mandatory Level
USER SETTINGS
CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS User Policy
Windows SBS CSE Policy
Small Business Server Folder Redirection Policy
U-Word 2013 Default Save Location
U-Office 2013 Disable Backstage
U-Office Disable Start Screen
U-Office Trust Center Settings
U-Word Autorecover Location
U-Word Autosave Interval
U-Word Disable Capitalization First Word
U-Word Set Arial Default Font
U-Word UI Customizations
U-Power Plan Settings
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
Windows SBS Link Users
Windows SBS Fax Users
Windows SBS SharePoint_MembersGroup
Windows SBS Folder Redirection Accounts
Windows SBS Remote Web Workplace Users
High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet. -
Photosmart c4580 windows 7 - set up CD doesn't work for Win 7!!!
Hello,
I've got my Photosmart c4580 for a while know, I still think it might be possible to get it wirelesse.
The CD that was sold with it to set up the wifi connection does not work for Windows 7!!! Any idea, what I could download instead? All drivers are updated.
Many thanks indeed,
CarolineYou need to download and install the full feature software and drivers for Win 7 here. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3418... Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Windows SBS 2011 Essentials out of space on C Drive
Hi there!
We have a Dell server running SBS Essentials 2011, and we have recently been getting messages saying that the C Drive is full. When we purchased the server, we ensured that Dell installed loads of storage for us which is confusing.
Upon looking into it the C drive is limited to 60GB. Is there a way that we can increase this limit from 60GB to use some of the excess storage that we have spread over the D & E Drives? With 0.5GB left it keeps shouting at us! If we could enlarge the
drive to 120Gb we should be fine for another couple of years.
Thanks in advance!
MaxThanks, I chatted with Adobe and got the programs move to the D drive. Since then, I have found the appdata/roaming/adobe file that has a ton of disk space (32 gigs) still used on the C Drive. How can I move this folder over to the D Drive as well?
-
Windows Update Error 80070002 on SBS 2011
I've tried many things to clear this up. SFC won't run, even in Safe Mode. I've run the System Update Readiness tool many times and have managed to clear up some of the errors with downloaded KB's, but I still have a few problems in CheckSUR.log, per
the below. Is there any way to clear up the remainder of this? I don't have access to another server with those files, unfortunately. Thanks in advance.
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-04-18 15:16<o:p> </o:p>
Checking Windows Servicing Packages<o:p></o:p>
<o:p> </o:p>Checking Package Manifests and Catalogs
(f) CBS Catalog
Corrupt 0x800B0100 servicing\Packages\Win8IP-Microsoft-Windows-DownlevelApisets-Shell-WinIP-Package~31bf3856ad364e35~amd64~pl-PL~7.1.7601.16492.cat <o:p></o:p>
<o:p> </o:p>Checking Package Watchlist<o:p></o:p>
<o:p> </o:p>Checking Component Watchlist<o:p></o:p>
<o:p> </o:p>Checking Packages<o:p></o:p>
<o:p> C</o:p>hecking Component Store
(f) CSI Manifest
Missing 0x00000002 x86_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.21044_none_c0083d0ea85d6898.manifest x86_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.21044_none_c0083d0ea85d6898
(f) CSI Payload File
Missing 0x00000000 D50.camp amd64_microsoft-windows-icm-profiles_31bf3856ad364e35_6.1.7600.16385_none_f5547dd01f628131
(f) CSI Payload File Missing 0x00000000 imjputyc.dll amd64_microsoft-windows-d..japanese-propertyui_31bf3856ad364e35_6.1.7601.22764_none_f13a9e939a11868b <o:p></o:p>
<o:p></o:p>
Summary:
Seconds executed: 1173
Found 4 errors
CSI Manifest Missing Total count: 1
CSI Payload File Missing Total count: 2
CBS Catalog Corrupt Total count: 1<o:p></o:p>
<o:p> </o:p>Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.21044_none_c0083d0ea85d6898.manifest
servicing\packages\Win8IP-Microsoft-Windows-DownlevelApisets-Shell-WinIP-Package~31bf3856ad364e35~amd64~pl-PL~7.1.7601.16492.mum
servicing\packages\Win8IP-Microsoft-Windows-DownlevelApisets-Shell-WinIP-Package~31bf3856ad364e35~amd64~pl-PL~7.1.7601.16492.cat<o:p></o:p>Hi Josh,
Please follow :
http://blogs.technet.com/b/roplatforms/archive/2010/05/12/how-to-fix-server-manager-errors-after-installing-updates-hresult-0x800f0818-hresult-0x800b0100.aspx
Also refer
http://blogs.technet.com/b/joscon/archive/2010/05/26/using-checksur-and-update-packages-to-fix-corruption.aspx
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
SBS 2011 Essentials RWA Problem
When I remote to my site: https://remote.daliahplastics.com
I get the following
Any Ideas?
Thanks DexterRobert
Thanks for your help. This is what I get after https://localhost
<meta content="IE=5.0000" http-equiv="X-UA-Compatible" /><title>Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.</title><meta
content="text/html; charset=utf-8" http-equiv="Content-Type" /><style>body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top:
-5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Lucida Console";font-size: .9em} .marker {font-weight: bold; color: black;text-decoration:
none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } </style><meta content="MSHTML 11.00.9600.16476" name="GENERATOR" />
Server Error in '/' Application.
Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
Microsoft.WindowsServerSolutions.Web.RootSite._Default.InitializeCulture() +0
ASP.default_aspx.FrameworkInitialize() +42
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +72
System.Web.UI.Page.ProcessRequest() +269
System.Web.UI.Page.ProcessRequest(HttpContext context) +167
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +625
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +270
Thanks
Dexter
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1016 -
Windows 7 professional - 32 Bit - preloaded - how to go for Win 7 professional - 64 bit option
Hi !
I recently purchased T510 Laptop with pre loaded Win 7 professional 32 bit OS. I want to upgrade this to Win 7 professional 64 bit. I tried to get help through Microsoft site and when I enter the Product Key, it requests me to contact Lenovo. When I called Lenovo support center they asked me to contact Microsoft site.
Can someone help in understanding if it possible to upgrade to 64 Bit professional using the same Key OR do we need to buy Windows 7 professional 64 Bit separately.
Thanks for your help.
Ritu SuriHi mail2ritusuri, and welcome to the Lenovo User Community!
Try Lenovo again, and reference this support page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74752
I don't work for Lenovo. I'm a crazy volunteer! -
Need SBS 2011 drivers for my RD240?
Anyone have any advice? the SBS 2008 64bit drivers do not work as a substitute. "Installation failed...wrong OS"
Solved!
Go to Solution.for the AST2040, try this driver by unpacking it and installing manually. open devmgmt.msc and point the driver to the folder that you just unpacked (likely C:\drivers\).
for LSI MSM, this version should be compatible. i'm using the same build on my thinkstation under server 2008 R2.
for the remaining drivers, you could also try manually installing them. unpack everything you want to install, then point the location to C:\drivers and let windows do its magic. many times this works when installing components in windows server that only have windows vista or 7 installers.
ThinkStation C20
ThinkPad X1C · X220 · X60T · 600 -
Windows 8.1 - T440s touchpad won't click for 1 sec after typing keyboard.
This is a well-known issue of Windows 8.1.
See http://support.microsoft.com/kb/2907018/en-us
But the problem is still there even after I did what the article says.
I disabled touchpad delay and installed hotfix from MS with no luck.
So I guess MS hasn't fixed it perfectly or there is a bug in Synapics' driver.
As a programmer, I alternate between typing keyboard and clicking buttons very quickly.
So this is a huge problem to me.
Is there anybody who knows how to fix/avoid this?Look in the Synaptics Ultranav settings. There's a checkbox for Prioritize for Trackpoint and Keyboard input. Uncheck this.
Also disable PalmCheck if you haven't already.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Maybe you are looking for
-
When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing mat
-
Deleted drafts - message headers remain with blank content (Gmail IMAP)
I thought I had solved the "zombie" drafts problem yesterday. I changed my Gmail.com IMAP settings to "auto-expunge off" and "immediately delete the message forever". My multiple zombie drafts finally disappeared from my Drafts box. But today, the mu
-
Multiple Applications failing to launch in Mac OSX Mavericks
Hi there, I recently updated my Mac Pro to Mac OSX Mavericks (OS X 10.9.2), and since that time, I have experienced multiple applications in my Adobe CC Subscription failing to launch. As a first step, I attempted to uninstall the applications so tha
-
Move Component To Front ?
Hey, I have a panel, with some images on it, and I wanted to add a table on it, but the images always hide the table (it happens that the images are on top of the table, when I want the images to be sort of a background). Is there any way to set the
-
Object is undefined : why?
Hi all. I'm working on a script to facilitate the creation and editing of books in InDesign. I'm not a programmer, and besides a few lines of code written by me, the script consists of code found and adapted to the purpose. I have a problem related t