Windows 7 rc1 boot camp flash drive

I posted this same post in other section. Someone suggested I post the question here.
How can I, on my mac, install windows 7 on a flash drive then boot from that flash drive for the boot camp install? My boot camp install stalls when expanding the files for the windows 7 setup. I think it might be my superdrive because the drive ejects media I put in it and the drive spins and stops, spins and stops when expanding the files on the install.
Ideas
Thanks

Flash drives - and external USB or FW - drives are not supported for Windows.
A few may have managed, and then on PC. And in most cases I think you need to install Windows normal manner first and then clone it.
You can boot OS X from external drives.
Using SD card slot in 2009 model
http://support.apple.com/kb/HT3553

Similar Messages

Installation window 7 sur boot camp les driver ne reconnai pas le clavier

je sais comment installer le boot camp le probleme apres l installation reconnai pas soi le clavier ni appareil relie usb et le windows beug et ram

quelqun a la solution pour ce probleme de depuis il y a eu cette mis a jour du boot camp je peut plus installe windows

Windows 8 boot camp, "no driver media"

Hi!
I have a macbook pro early 2011. I'm trying to install windows 8 via boot camp but always in the beginning of the installation i get this error message saying something about a missing driver media. I've tried different DVDs, burnt them with different speeds and tried to do it with usb as well (it didn't even recognize usb boot). What should I do?
P.S

One Option is to just check on Download drivers, and let BA download the correct drivers. It saves them in /Library/Application\ Support/Bootcamp/windows.dmg.
Next time when you have all three boxes checked, it will pick up this .DMG and the ISO and create a USB (you need to use a USB2 flash drive, not a USB3 one). Can you try this method and see what happens?
Please see this also - http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/windo ws-8-upgrade-install-stuck-at-personalise/0e68f906-2bee-4043-b8c5-368098485aff
From Boot Camp Support Software 5.1.5640
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2013)
MacBook Pro (Retina, 13-inch & 15-inch, Late 2013)
Mac Pro (Late 2013)
iMac (21.5-inch & 27-inch, Late 2013)
Windows 7, Windows 8, and Windows 8.1, 64 bit

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp. It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

http://support.apple.com/kb/HT5287

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Need help installing my graphics driver in windows vista via boot camp

New to mac so first time on forum as well.
Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
I am currently using below.
Mac mini Mid 2011 processor 2.5 GHz Intel Core it
Memory 4 GB 1333 Mhz DDR3
Graphics AMD Radeon HD 6630M 256 MB
Software Mac OS X Lion 10.7.5
Installing windows vista home premium 32 bit
I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
Advise?
I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
What is the driver i need to install to get these games working? What do I need to do or what am I missing???
Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
Any and all responses will be greatly appreciated i have been at this everyday for hours.

Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

Installing Windows 7 in Boot Camp with iso

I have downloaded an .iso file with Windows 7 on but I can't install it in Boot Camp. I've tried several things with no luck.
1. For the first, when I start up Boot Camp assistant I can't choose to "Create a Windows 7 install disk". I only have the two bottom options, the one for downloading support software and the one for installing windows 7. So I can't use my .iso file there.
2. I tried to burn a bootable dvd with the .iso file. I burned it on a Windows PC since my superdrive won't burn on the discs I've got (DVD+R). The disc works properly on the Windows PC but when i mount it in my Macbook I only get a popup that says I've put in a blank disc and some options of what I wan't to do next.
3. I tried to make a bootable flash drive and that pops up in finder, but the Boot Camp assistant won't recognize it and says I have to put in a Windows 7 install disc.
4. I also tried to open the image file in disc utility, but the result is the same as if I'm trying with a flash drive.
I'm out of ideas now so it would be nice if someone else knew any other possibilites to install Windows 7 in Boot Camp.
Or maybe there is an solution for the things I've alleready tried?
I'm using a MacBook Pro late 2008

Does it boot off the internal?
Is the external a full copy of your working system?> whew! then you can always wipe it clean and start over.
As long as the partition was created properly.... though 50GB can work it can also be slim fit in the end.
Under the worst condition - and the Mini is one of the worst, too - two minutes maybe to restart.
External because there never was an internal DVD player?
zap pram.
did you buy DVD or burn DVD? if burned, then that is likely cultprit Redo at slowest burn speed (2x) with verify.
Heck, even Windows 7 SP1 has been implicated on some were pre-SP1 worked.
For a test, there is Windows 8 RP for free. And Parallels 7 will set up a VM for you with the whole download and inistall. Not everyone needs to run natively.

How to install windows 7 in bootcamp from flash drive os x 10.9.1

How to install windows 7 in bootcamp from flash drive os x 10.9.1

oooHideooo wrote:
It DOESN'T WORK!!
I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
anyone else has a real solution to this problem?
Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

Mac Notebook - Install Windows 7 with Boot Camp

The DVD drive is broken so I am not able to install Windows 7 using boot camp. I created a few bootable Windows 7 USB drives and while the Mac is reading the drive, when I attempt have boot camp use this flash drive to install Windows 7, it keeps giving me an error that the Windows 7 CD is not in the DVD drive. It's looking for the Windows 7 installation CD in the DVD drive.
How do I get around this? I think I created the bootable USB drvie with Windows 7 correctly but it's still not working. Are there other workarounds I can do such as download the ISO file to the Mac's desktop and use boot camp to install Windows?
Thanks.

You didn't mention which OS X version you have. Not every Mac or every version of OS X or every version of Boot Camp supports installing every version of Windows from an ISO image.
Boot Camp 5.1: Frequently asked questions - Apple Support
Depending upon the age and parts availability of your Mac, it might be less expensive to have it repaired, or to purchase an external DVD drive. No guarantee that Boot Camp will 'see' the external DVD, with the internal DVD still connected, however.
If Boot Camp on your Mac does not support an ISO image, and your Mac DOES support the minimum requirements to run a recent version of Parallels (7 or newer), Parallels is capable of installing a Windows virtual machine from a Windows ISO image. Windows performance under Boot Camp is likely much better than Windows running as a virtual machine under Parallels and OS X. The most recent version of Parallels is always available for a short-duration free trial: http://www.parallels.com You still need a valid Windows license to complete even a trial installation. Older versions of Parallels (prior to version 9) will not run under OS X 10.10 Yosemite. Parallels needs to be set to look for the correct ISO image location, rather than a DVD.

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

Unable to install Windows 8 in Boot Camp because of MBR

I just this weekend reformatted my MacBook Pro (Mid 2010, 15", 2.4 gHz i5) and so I had to reinstall Windows 8 with Boot Camp. I had it working fine before, although the lack of drivers made it absolutely terrible (Has Apple released any drivers for it yet?) but the installation went without a hitch. When I tried to install Windows 8 this time though, it did not work at all. On the OS X side, everything went as expected, and when I went to Windows installation everything worked until I had to select a partition. I feel like at this point I should point out that I have removed the optical drive from my Mac and have the Optibay in my optical drive bay and have a 128 GB SSD as my main drive and a 512 GB SSD in the optical drive slot, which was where my Bootcamp partition was, around 250 GB. I was installing Windows 8 using an external enclosure for my Superdrive with the Retail Windows 8 DVD full version. Anyways, when I went to select the partition, it said that it was unable to install because
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks."
I have heard many conflicting resolutions to the problem, I have heard that I need to remove the other drive and install the optical drive and I have heard that this works very well, and many other things, I just want to find the correct solution to this. Thank you! And I hope I provided you with enough information!

I have a cd drive with a bootable windows 7 disc and I already downloaded the drivers needed to a pendrive on MS-DOS Format.
However this devil things asks me for a windows 8 disc.
Many many thanks if someone knows how to do it.

Erased boot camps hard drive with time machine?

so, i completely erased windows by erasing what was on boot camps hard drive. Boot camp cannot read my "start up" harddrive now. and the harddrive will not turn into a jornaled macintosh hard drive. i checked it with disk utility and it claims to be ok. is there a way i canget back the hard drive and my windows 7 to start up all over again?

I am having a similar problem. I use a Lacie external hard drive connected to an Airport Time Capsule via USB to store my itunes library. Yesterday I disconnected the external drive from the ATC and connected it to my macbook pro via fire wire to transfer 40 gigabytes of media files from my laptop to the external drive directly rather than over wifi. When I reattached the external drive to the ATC the Lacie drive didn't show up even after rebooting everything. I then disconnected from the ATC and reconnected to the laptop and now I get an error message saying the Lacie disk is unrecognizable and needs to be reformated. The Lacie drive was being included in the time machine backups so the files should be available through time machine but I don't see anyway to access them because the Lacie disk icon doesn't appear in the time machine backups. Is there another way to browse the files?
I have had issues with Lacie disks not showing up on the desktop before, particularly when transferring files from one computer to another. The transfer usually goes fine but then when I reattach the drive to the first computer it isn't recognized anymore until I reboot and it sometimes requires a couple of reboots. I initially tried to connect the external drive to both the ATC and the laptop but that didn't work, although now I'm wondering if that was because the connection to the laptop was firewire rather than USB like the ATC. In any case I currently have over a terabyte of data on my lacie that I can't access which includes my entire itunes library and backup files from multiple computers which were "cleaned" but not restored.
Disk utility sees the drive but can't verify or repair and tells me to backup as many files as possible and then reformat. Unfortunately I can't see ANY files to backup because the disk won't mount anywhere. If anyone has a recommendation for utilities to recover the files I'd be most grateful to get them.

Windows 7 rc1 boot camp flash drive

Similar Messages

Maybe you are looking for