Windows 7 Restart issues after waking from sleep/hibernating on y430

I've installed windows 7 and installed all drivers but one driver that no one on this message board has solved yet (it is detected as an unknown device - ACPI/CPL0002) When I wake the computer from sleep and hibernating the computer cannot restart properly. It would stop the hard drive after windows has finished the shut down process but the power lights will stay on. I then have to hold the power button down until the system powers off.
I have updated my y430 to the latest bios but this problem still persists.
Any idea on why this is?
Thanks

05-24-2010 11:14 AM
Finally Divyanshu solved the problem . Waoo. I feel so happy, so great. Lenovo Y430 I want to tell to all y430 lenovo users.
Windows 7 unknown device compal embedded system control 0.0.0.2 version or 2.0.0.2 . Thermal mode
ok. this driver is sitting on lenovo china , we were not able to figure it out, because of the language problem. My chinese friend helped me figure it out. .. WAOO . 3 cheers....
Click on the orange tab on the left side. Install the software. wait till it completes "Yes you want to restart the computer now ""
http://support1.lenovo.com.cn/lenovo/wsi/Modules/DriverDetail.aspx?ID=18039
If you need any other driver for y430, let me know ... Have a great day .. if you like my message reply to post... Thanks.
Divyanshu Arora

Similar Messages

Macbook Retina with Mountain Lion issues after waking from sleep.

Macbook Retina with Mountain Lion has the spinning beach ball of death after waking from sleep a few times. Anyone else seeing this? A fresh boot is very quick, but waking from sleep lags at times. Then after a few times the spinning beachball of death appears and nothing is responsive making me reboot the machine.

I've been suffering from this too, and am currently trying this:
http://www.ewal.net/2012/09/09/slow-wake-for-macbook-pro-retina/
Seems to be tied to this 'Power Nap' feature. I tuned it for 12 hours instead of 24.

2008 Mac Pro restarting itself after waking from sleep

Recently, my Mac Pro has taken to restarting itself unasked upon waking from sleep. I just moved to a town with a hot summer, and my room has no air conditioning and gets quite warm. Could the temperature in the room be causing this? I don't think so, because it happens in the cool of the morning after an all night sleep, too.
Another factor I just discovered is that one of my RAM chips has stopped showing up in the system profiler.

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

Boot Camp, Expose, Trackpad & Dock issues after waking from sleep 10.6.1

Hello,
Here's my setup:
13" MBP (Late 2009)
2.26 GHz Intel Core 2 Duo
2 GB 1067 MHz DDR3
500 GB HD (Seagate Momentus Non G-Force version)
OSX 10.6.1: 367 GB
Boot Camp MS Windows 7 RTM: 123 GB
All of this started yesterday. After pressing the power button to boot, the MBP would give me the Mac boot sound, and would not recognize that the "Option" key was depressed. This would cause the system to boot into Windows 7 due to the Boot Camp default setting. After trying to get the system to boot into OSX 5 times, I ended up changing the default boot OS to OSX. The MBP now boots into OSX, but still does not recognize the option key on bootup so it will boot into the Boot Camp default selection only.
The following Problems are plaguing my MBP after waking up from a sleep state when running OSX 10.6.1:
The trackpad is performing right clicks no matter how many fingers are used to click the trackpad.
The dock changes from the Un-Magnified setup to a Magnified setup.
Expose takes on average 1 to 2 seconds to switch from the tiled view back to a selected application. The animation is slow, and the windows are not properly displayed after selecting an application.
Except for the Option key not being recognized during boot, these problems go away if I restart, but come right back when the system enters the sleep mode. Help!!!
Andy

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Having window location issues when waking from sleep

Since upgrading to Mavericks, sometimes when my Mini wakes from sleep the application windows are located off screen. At first I would quit and reopen most of the applications affected (especially FileMaker), but I find I can bring the windows back within view by going to Displays in System Preferences, changing the rotation, then cancelling after the redraw. My monitor is a BenQ GW2450H, but it doesn't seem like this is a monitor issue (no problems in System 10.7).

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

New Macbook Air - display issues after waking from sleep

I have a 1 day old Macbook Air 13" (2013) --- when I wake the machine from sleep, the display shows horizontal / vertical bands for a couple of seconds before clearing up to show the desktop. Please see attached picture. This doesn't happen 100% of the time but I've been able to repeatedly replicate this at intervals. Does this seem like a hardware problem or an OS related issue? Thanks.

Joan Amat wrote:
Brand new Macbook Air 2013
Display driver fault from wakeup, or external disconnect occurrence.
reset SMC and re verify
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Since you just bought it, contact Apple about making an exchange within 14 days or repair after 2 week period.
peace.

Airport Issue After Waking From Sleep (White Unibody MacBook)

Hi all. On my new white unibody MacBook I have an Airport issue that always occurs after I wake the MacBook from sleep. I'm wondering if any of you have a similar issue and/or might not how to solve it.
Basically, when I wake the MacBook from sleep, it connects to my wireless network (and to whichever network I happen to be using at the time). A few seconds later, it will drop the connection, an exclamation mark will appear on top of the Airport icon on the menu bar, and when I click on the icon I see "Alert: No Internet Connection."
Then, if I just sit and wait, eventually Airport will connect to the network. But I have to wait -- selecting the network from the available list or turning Airport off and on doesn't help. And sometimes waiting isn't enough -- I sometimes have to go to "Create Network ..." and start all over to get a connection.
I've upgraded to 10.6.2 and the issue persists. I'd appreciate any help.
Message was edited by: Duke Spirit

My wife's Macbook has EXACTLY the same problem and I've been through dozens of suggestions trying to fix it and the problem still persists.
The problem started right after I upgraded to Snow Leopard but also installed an Airport Extreme router and WPA2 wireless encryption. I've deleted all the networks, changed the order to put the Airport as the highest preference, deleted all the keys on the keychain, ran DiskUtility, all to no avail.
I'm not sure if this is somehow related to the Airport Extreme or occurs with any router. Also, have another MacBook Pro (unibody), and it does't have this problem connecting to the same Airport Extreme.
The other factor is it is intermittent --- and doesn't always fail. Rebooting the Macbook or the router will get it to re-connect, as will shutting off and turning on the Airport several times. But that's not a solution to the problem.
Apple needs to pay attention to this as many people are now reporting the problem.

Jabber issues after waking from sleep

When i wake my air from sleep, jabber is offline, and tells me that it had issue, but when i pull down the tab to say i am availible it will not connect, no message no anything. but if i go to file and accounts and uncheck gmail, and recheck it. It give me a message that it will be unsecure, and connects. Is there a setting i should have that i am missing, maybe a port i should use instead?
thanks

Sign out of gtalk
go to preferences>accounts in Messages.
select gmail from the accounts
select server setting (the far right option)
make sure it is
server: talk.google.com
port: 5223
make sure you check use SSL
I also have checked: warn before sending password insecurely.
hope this helps!

Issues after waking from sleep

Hi
I have 15" MBP SR 2.4ghz. I have noticed recently that my machine either doesn't show anything on it's display after waking by opening the lid. Also, sometimes it wakes up fine but then some programs don't launch properly or the cursor jitters along as I move it. I'm hoping its a buggy 10.5.2 update, as I never had this problem with 10.5.1.
Any ideas?

Hi
Having the same issues, and I have to do a hard reboot to get the display on again. Trying to figure out a pattern of when it happens and when not, will post back if I have any joy.

Internet issue after waking from sleep

Hi,
When I wake my computer for being asleep, I can connect to my home wireless network, and the router shows that the internet connection is fine, yet webpages won't load in either Safari or Firefox, and I can't connect to Skype, MSN etc until I re-boot.
Any suggestions about what could be causing this minor, yet annoying issue?
Cheers,
Paul

When my Macbook wakes from sleep, I have the same issue. But all I have to do click on the Airport icon and reconnect to my network. I found that changing my network's password to WPA (instead of WEP, which I constantly had issues with) works every time. I would strongly advise against using a WEP password.
Ever since I installed the most recent update and changed my wireless to a WPA password, I've had no more problems connecting to the internet.

Toolbar issue after waking from sleep

When I wake my MBP Retina up from sleep, the top toolbar has recently been appearing a dark grey color instead of the normal translucent color. This problem is quickly fixed when I three finger scroll to another screen, but it is still annoying. I have had screen flicker issues recently so could this be related?

When my Macbook wakes from sleep, I have the same issue. But all I have to do click on the Airport icon and reconnect to my network. I found that changing my network's password to WPA (instead of WEP, which I constantly had issues with) works every time. I would strongly advise against using a WEP password.
Ever since I installed the most recent update and changed my wireless to a WPA password, I've had no more problems connecting to the internet.

Keyboard Viewer window opens up after waking from sleep and screensaver

I have the MacBook keyboard freezing problem since upgrading to Leopard. One time (at band camp), I opened the Keyboard viewer so I could enter some text prior to rebooting. Now, the keyboard viewer pops up after every wake from sleep, return from screensaver (both password protected), and sporadically when switching/quitting applications.
I have tried rechecking and unchecking the "keyboard viewer" and "show input menu in menu bar" in System Preferences->International->Input Menu. While not a serious problem, it is rather annoying. How do I get the keyboard viewer to stop opening?
On a related note, there must be a script or program that is run every time the computer wakes from sleep and password protected screensaver that prompts for a password. Anyone know where this is located?
Peter

Ok, I just tried that. I deleted com.apple.KeyboardViewerServer.plist. I then started my screensaver. When I came back in...the Keyboard Viewer was back and there was a new plist file that was created...so, something else must be controlling it.

Restarting after waking from sleep

I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.3.0
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.exfat          1.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Any suggestions would be greatful,
Thanks,
Marie

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

Macbook Pro restart after waking from sleep

Hi all,
Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
Thanks!

Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19675376#19675376

After upgrading to Tiger, freeze after waking from sleep on PM G4

My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.

Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron

Windows 7 Restart issues after waking from sleep/hibernating on y430

Similar Messages

Maybe you are looking for