Windows 7/RH 9 Conflict
We upgraded to Windows 7 a couple of weeks ago, and since that time we've experienced problems using the Search feature. When you type in a word that is DEFINITELY in one or more topics, the Search results are "no topics found." It doesn't matter if the word is in quotes or not in quotes. It doesn't matter if it's a single word or phrase.
I've asked the programmers to look into this, but wondered if anyone else has addressed this and has a solution. If so, please advise.
Thanks!
Hi there
Just a small suggestion of something to try here. When you examine the Single Source Layout recipe, look at the Search options. Is the option for enabling Substring Search enabled? If so, try disabling it and see what happens. LIkewise, if it's not enabled, try enabling and see if anything changes.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks
Similar Messages
-
Windows 2003 Cluster IP Conflict during failover. Possible Spilt Brain Syndrome ?
Dear all,
I would like to ask if anyone had a case of IP Conflict on the Virtual Cluster IP Address resource ?
It was observed that both Windows cluster nodes presented the Virtual IP address resource at the same time.
Could I know how can such a thing happen, there are may safeguards to prevent such spilt brain symptom.
Thanks a lot.Dear Tim & Alex
Apologies for the late reply . Forgot about the alert me feature...
Our switches are configured with a feature to lock-out (disable) any port with a duplicate IP address/MAC address.
May I know would there actually be a time for maybe for a split second where both Virtual Cluster IP addresses are presented on the NICs of both nodes ?
This incident happened again but this time the situation was during a restart of the passive node. What happened was that upon restart, the resources on the active node attempted to fail over to the passive node when I restarted the passive node. Upon login,
I then realised that the port on the restarted node was portlocked and the services stayed on the restarted node, even though It was strange for it to failover as it had not reason to ( it was running fine on the other node) . I tried to open the cluster administrator
on the node that was not restarted and it had cluster administrator in a hanged state however the service was indicated as started. The cluster administrator on the restarted node indicated cluster IP has failed while the ownership was all on the restarted
node.
I find it curious that the cluster administrator would be unresponsive on the node that was not restarted as it did a failover smoothly just 30 min ago.
Thanks for your time! -
HT1620 windows 8 and itunes conflict, itunes won't recognize my existing ipod touch
I have an existing ipod touch and windows 8. For some reason, itunes is telling me to check latest windows update but my computer is up to date.No idea what to do?
Hi lovemymusic99,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
This is the most recent version of iTunes for Windows.
Click on the link to see more details and screenshots.
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113?viewlocale=en_US
Cheers,
- Judy -
Windows service pack three conflict with indesign
I have hundreds, if not thousands, of Pagemaker 7 client files. My Windows machine was recently upgraded to Service Pack 3 and it will not let me open Pagemaker files into Indesign CS3 and convert. jApparently, there was no problem with Service Pack 2.
Help! There must be a patch. I also got new laptop today with Windows 7 hoping I might be able to open them but now discovered that I can't use a single pne of my Adobe products on it because they are not CS4 Versions.
Anybody know a fix so I can get all PM7 files converted?You do not have CS3. You have version 3 which is CS.
This may well be your last chance to upgrade and I suggest you take it. If the current policy remains in effect when CS5 is released you will not be eligible for upgrade pricing.
You can read more about the PM problem here:
http://indesignsecrets.com/windows-xp-service-pack-3-breaks-indesign-cs2-pagemaker-convers ion-capability.php
Bob -
Duplicate IP 0.0.0.0 Conflict on 802.1X Windows 7 Clients
Hi,
Ever since we implemented ISE 1.x with 802.1X authentication about two years ago, a number of our Windows 7 user stations occassionally report the well known error message: "duplicate ip 0.0.0.0" . Only wired stations are affected and it happens randomly but not frequently. On further investigation I found that the conflicting device mac address in every case is in fact the bia of the switch port that the Windows 7 PC client is connected. The characteristics of each case is consistent with the Cisco device tracking process as detailed in TAC Document ID: 116529, Updated: Oct 09, 2013
http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/8021x/116529-problemsolution-product-00.html
We have Cisco C6500 access switches with IOS Ver: 12.2(33)SXJ1.The output of "Show ip device track all" command on the switches:
access-switch#sh ip device track all
IP Device Tracking = Enabled
IP Device Tracking Probe Count = 3
IP Device Tracking Probe Interval = 30
I found that Cisco recommends three Solution options as follows:
1. ip device tracking probe delay 10
2. ip device tracking probe use-svi
3. ip device tracking probe interval <seconds>
However, the ios only shows track probe "count" and "interval" for change. There is no option to change the probe delay or use-svi in this IOS.
What is your advice?
Many thanks.
SankungYou may have a look at this document if you have not seen it yet. It goes over device tracking a little more in detail and possible workarounds.
http://tekdigest.blogspot.com/2013/11/windows-7-with-address-conflict-for-ip.html
HTH
luke -
Random I/O errors (hdd) and failing to boot, Windows not affected
I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
Partition layout:
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs System Reserved D8B40750B4073094
├─sda2 ntfs 00EA107FEA107360
└─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
sr0
All three are primary partitions. Using ext4 yields the exact same result.
The problem is easy to reproduce:
Install Windows 7 to first half of HDD and Arch on the second half
At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
Windows seems to work just fine
Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
[ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x9FB7C000 000040
[ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1668MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
[ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
[ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
[ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
[ 0.000000] On node 0 totalpages: 649053
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3337 pages used for memmap
[ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5234680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146853a - 0xc162ec80 (1817 kB)
.text : 0xc1000000 - 0xc146853a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.408 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140424
[ 0.009582] ACPI: All ACPI Tables successfully acquired
[ 0.015209] Security Framework initialized
[ 0.015217] Yama: becoming mindful.
[ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015491] Initializing cgroup subsys devices
[ 0.015498] Initializing cgroup subsys freezer
[ 0.015502] Initializing cgroup subsys net_cls
[ 0.015507] Initializing cgroup subsys blkio
[ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015531] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015536] mce: CPU supports 7 MCE banks
[ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016347] ftrace: allocating 19356 entries in 38 pages
[ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.162668] ... version: 0
[ 0.162670] ... bit width: 48
[ 0.162671] ... generic registers: 6
[ 0.162672] ... value mask: 0000ffffffffffff
[ 0.162674] ... max period: 00007fffffffffff
[ 0.162675] ... fixed-purpose events: 0
[ 0.162676] ... event mask: 000000000000003f
[ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
[ 0.186179] x86: Booting SMP configuration:
[ 0.186182] .... node #0, CPUs: #1
[ 0.218942] Initializing CPU#1
[ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
[ 0.226179] #2
[ 0.258736] Initializing CPU#2
[ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
[ 0.266180] #3
[ 0.276300] Initializing CPU#3
[ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.279379] x86: Booted up 1 node, 4 CPUs
[ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
[ 0.280484] devtmpfs: initialized
[ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[ 0.281973] pinctrl core: initialized pinctrl subsystem
[ 0.282053] RTC time: 22:28:26, date: 09/21/14
[ 0.282107] NET: Registered protocol family 16
[ 0.282225] cpuidle: using governor ladder
[ 0.282228] cpuidle: using governor menu
[ 0.282436] ACPI: bus type PCI registered
[ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.282558] PCI: Using MMCONFIG for extended config space
[ 0.282559] PCI: Using configuration type 1 for base access
[ 0.293370] ACPI: Added _OSI(Module Device)
[ 0.293374] ACPI: Added _OSI(Processor Device)
[ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323484] ACPI: Interpreter enabled
[ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.323519] ACPI: (supports S0 S3 S4 S5)
[ 0.323522] ACPI: Using IOAPIC for interrupt routing
[ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.335971] PCI host bridge to bus 0000:00
[ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.336266] pci 0000:00:01.0: supports D1 D2
[ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.336417] pci 0000:00:01.1: supports D1 D2
[ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
[ 0.340177] pci 0000:00:12.2: supports D1 D2
[ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[ 0.343004] pci 0000:00:13.2: supports D1 D2
[ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.344446] pci 0000:01:00.0: supports D1 D2
[ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
[ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.356487] pci 0000:03:00.0: supports D1 D2
[ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.363129] pci_bus 0000:00: on NUMA node 0
[ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367456] vgaarb: loaded
[ 0.367458] vgaarb: bridge control possible 0000:00:01.0
[ 0.367505] PCI: Using ACPI for IRQ routing
[ 0.369255] PCI: pci_cache_line_size set to 64 bytes
[ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
[ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
[ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
[ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.369516] NetLabel: Initializing
[ 0.369518] NetLabel: domain hash size = 128
[ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369532] NetLabel: unlabeled traffic allowed by default
[ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371730] Switched to clocksource hpet
[ 0.378213] pnp: PnP ACPI init
[ 0.378231] ACPI: bus type PNP registered
[ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.378841] system 00:04: [io 0x04d6] has been reserved
[ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.378846] system 00:04: [io 0x077a] has been reserved
[ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.378850] system 00:04: [io 0x0c14] has been reserved
[ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.378855] system 00:04: [io 0x0c6c] has been reserved
[ 0.378857] system 00:04: [io 0x0c6f] has been reserved
[ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382206] pnp: PnP ACPI: found 6 devices
[ 0.382211] ACPI: bus type PNP unregistered
[ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
[ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420484] NET: Registered protocol family 2
[ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420733] TCP: reno registered
[ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420798] NET: Registered protocol family 1
[ 0.420831] pci 0000:00:01.0: Boot video device
[ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.038759] PCI: CLS 64 bytes, default 64
[ 1.038818] Unpacking initramfs...
[ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
[ 1.112753] Simple Boot Flag at 0x44 set to 0x1
[ 1.113077] perf: AMD NB counters detected
[ 1.113122] LVT offset 0 assigned for vector 0x400
[ 1.113138] perf: AMD IBS detected (0x000000ff)
[ 1.113149] apm: BIOS not found.
[ 1.113200] Scanning for low memory corruption every 60 seconds
[ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.116388] zbud: loaded
[ 1.116669] VFS: Disk quotas dquot_6.5.2
[ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.116962] msgmni has been set to 1707
[ 1.117034] Key type big_key registered
[ 1.117325] bounce: pool size: 64 pages
[ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.117448] io scheduler noop registered
[ 1.117452] io scheduler deadline registered
[ 1.117524] io scheduler cfq registered (default)
[ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118114] GHES: HEST is not enabled!
[ 1.118129] isapnp: Scanning for PnP cards...
[ 1.513691] isapnp: No Plug & Play device found
[ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514746] rtc_cmos 00:01: RTC can wake from S4
[ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515246] TCP: cubic registered
[ 1.515386] NET: Registered protocol family 10
[ 1.515657] NET: Registered protocol family 17
[ 1.516096] Using IPI No-Shortcut mode
[ 1.516269] registered taskstats version 1
[ 1.516866] Magic number: 14:856:502
[ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
[ 1.517032] PM: Hibernation image not present or could not be loaded.
[ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.517350] Write protecting the kernel text: 4516k
[ 1.517388] Write protecting the kernel read-only data: 1332k
[ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.529660] systemd-udevd[57]: starting version 216
[ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
[ 1.568048] ACPI: bus type USB registered
[ 1.568103] usbcore: registered new interface driver usbfs
[ 1.568141] usbcore: registered new interface driver hub
[ 1.568537] SCSI subsystem initialized
[ 1.574578] usbcore: registered new device driver usb
[ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594746] ehci-pci: EHCI PCI platform driver
[ 1.594935] QUIRK: Enable AMD PLL fix
[ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.595002] ehci-pci 0000:00:12.2: debug port 1
[ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
[ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595830] ohci-pci: OHCI PCI platform driver
[ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.602284] libata version 3.00 loaded.
[ 1.602306] hub 1-0:1.0: USB hub found
[ 1.602325] hub 1-0:1.0: 5 ports detected
[ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.602912] ehci-pci 0000:00:13.2: debug port 1
[ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
[ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.612308] hub 2-0:1.0: USB hub found
[ 1.612317] hub 2-0:1.0: 5 ports detected
[ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.613374] hub 3-0:1.0: USB hub found
[ 1.613388] hub 3-0:1.0: 2 ports detected
[ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.616754] hub 4-0:1.0: USB hub found
[ 1.616768] hub 4-0:1.0: 2 ports detected
[ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.673072] hub 5-0:1.0: USB hub found
[ 1.673098] hub 5-0:1.0: 5 ports detected
[ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[ 1.729803] hub 6-0:1.0: USB hub found
[ 1.729831] hub 6-0:1.0: 5 ports detected
[ 1.730166] ahci 0000:00:11.0: version 3.0
[ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.731131] scsi0 : ahci
[ 1.731321] scsi1 : ahci
[ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
[ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
[ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[ 2.218438] ata2.00: configured for UDMA/133
[ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.318651] ata1.00: configured for UDMA/133
[ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.338885] sda: sda1 sda2 sda3
[ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 2.438989] ata1.00: irq_stat 0x40000008
[ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
[ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 2.439127] ata1.00: status: { DRDY ERR }
[ 2.439166] ata1.00: error: { ICRC ABRT }
[ 2.439207] ata1: hard resetting link
[ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586950] usbcore: registered new interface driver usbhid
[ 2.586953] usbhid: USB HID core driver
[ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
[ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
[ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
[ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
[ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.039928] ata1.00: configured for UDMA/133
[ 3.039955] ata1: EH complete
[ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
[ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
[ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
[ 3.089128] ata1.00: irq_stat 0x40000008
[ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
[ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.089265] ata1.00: status: { DRDY ERR }
[ 3.089304] ata1.00: error: { ICRC ABRT }
[ 3.089346] ata1: hard resetting link
[ 3.115583] Switched to clocksource tsc
[ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.694602] ata1.00: configured for UDMA/133
[ 3.694621] ata1: EH complete
[ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
[ 3.809168] ata1.00: irq_stat 0x40000008
[ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
[ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.809305] ata1.00: status: { DRDY ERR }
[ 3.809343] ata1.00: error: { ICRC ABRT }
[ 3.809385] ata1: hard resetting link
[ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.404835] ata1.00: configured for UDMA/133
[ 4.404858] ata1: EH complete
[ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
[ 4.453760] ata1.00: irq_stat 0x40000008
[ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
[ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
[ 4.453894] ata1.00: status: { DRDY ERR }
[ 4.453932] ata1.00: error: { UNC }
[ 4.637639] ata1.00: configured for UDMA/133
[ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
[ 4.637691] sd 0:0:0:0: [sda]
[ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
[ 4.637695] sd 0:0:0:0: [sda]
[ 4.637697] Sense Key : 0x3 [current] [descriptor]
[ 4.637700] Descriptor sense data with sense descriptors (in hex):
[ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.637710] 00 00 09 b8
[ 4.637714] sd 0:0:0:0: [sda]
[ 4.637716] ASC=0x11 ASCQ=0x4
[ 4.637718] sd 0:0:0:0: [sda] CDB:
[ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
[ 4.637727] end_request: I/O error, dev sda, sector 2488
[ 4.637786] Buffer I/O error on device sda1, logical block 55
[ 4.637826] Buffer I/O error on device sda1, logical block 56
[ 4.637866] Buffer I/O error on device sda1, logical block 57
[ 4.637905] Buffer I/O error on device sda1, logical block 58
[ 4.637945] Buffer I/O error on device sda1, logical block 59
[ 4.637984] Buffer I/O error on device sda1, logical block 60
[ 4.638024] Buffer I/O error on device sda1, logical block 61
[ 4.638063] Buffer I/O error on device sda1, logical block 62
[ 4.638105] Buffer I/O error on device sda1, logical block 63
[ 4.638188] ata1: EH complete
[ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
[ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
[ 4.879364] ata1.00: irq_stat 0x40000008
[ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
[ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 4.879502] ata1.00: status: { DRDY ERR }
[ 4.879540] ata1.00: error: { ICRC ABRT }
[ 4.879583] ata1: hard resetting link
[ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5.469816] ata1.00: configured for UDMA/133
[ 5.469845] ata1: EH complete
[ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 5.582859] ata1.00: irq_stat 0x40000008
[ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
[ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 5.582997] ata1.00: status: { DRDY ERR }
[ 5.583036] ata1.00: error: { ICRC ABRT }
[ 5.583078] ata1: hard resetting link
[ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.191135] ata1.00: configured for UDMA/133
[ 6.191166] ata1: EH complete
[ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
[ 6.256073] ata1.00: irq_stat 0x40000008
[ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
[ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.256212] ata1.00: status: { DRDY ERR }
[ 6.256250] ata1.00: error: { ICRC ABRT }
[ 6.256292] ata1: hard resetting link
[ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.845773] ata1.00: configured for UDMA/133
[ 6.845806] ata1: EH complete
[ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
[ 6.986223] ata1.00: irq_stat 0x40000008
[ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
[ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.986360] ata1.00: status: { DRDY ERR }
[ 6.986399] ata1.00: error: { ICRC ABRT }
[ 6.986440] ata1: hard resetting link
[ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.578097] ata1.00: configured for UDMA/133
[ 7.578124] ata1: EH complete
[ 7.587216] random: nonblocking pool is initialized
[ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
[ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 7.602850] ata1.00: irq_stat 0x40000008
[ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
[ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 7.602982] ata1.00: status: { DRDY ERR }
[ 7.603020] ata1.00: error: { ICRC ABRT }
[ 7.603061] ata1: hard resetting link
[ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.188490] ata1.00: configured for UDMA/133
[ 8.188517] ata1: EH complete
[ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[ 8.216361] ata1.00: irq_stat 0x40000008
[ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
[ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.216500] ata1.00: status: { DRDY ERR }
[ 8.216539] ata1.00: error: { ICRC ABRT }
[ 8.216581] ata1: hard resetting link
[ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.809726] ata1.00: configured for UDMA/133
[ 8.809758] ata1: EH complete
[ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[ 8.836295] ata1.00: irq_stat 0x40000008
[ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
[ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.836429] ata1.00: status: { DRDY ERR }
[ 8.836467] ata1.00: error: { ICRC ABRT }
[ 8.836507] ata1: hard resetting link
[ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.430994] ata1.00: configured for UDMA/133
[ 9.431018] ata1: EH complete
[ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 9.837542] ata1.00: irq_stat 0x40000008
[ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
[ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 9.837680] ata1.00: status: { DRDY ERR }
[ 9.837719] ata1.00: error: { ICRC ABRT }
[ 9.837761] ata1: hard resetting link
[ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.515900] ata1.00: configured for UDMA/133
[ 10.515972] sd 0:0:0:0: [sda]
[ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
[ 10.515978] sd 0:0:0:0: [sda]
[ 10.515979] Sense Key : 0xb [current] [descriptor]
[ 10.515983] Descriptor sense data with sense descriptors (in hex):
[ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.515992] 5e 89 08 20
[ 10.515997] sd 0:0:0:0: [sda]
[ 10.515998] ASC=0x47 ASCQ=0x0
[ 10.516001] sd 0:0:0:0: [sda] CDB:
[ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
[ 10.516010] end_request: I/O error, dev sda, sector 1586038816
[ 10.516148] ata1: EH complete
[ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
[ 10.529786] ata1.00: irq_stat 0x40000008
[ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
[ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 10.529924] ata1.00: status: { DRDY ERR }
[ 10.529962] ata1.00: error: { ICRC ABRT }
[ 10.530004] ata1: hard resetting link
[ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.139673] ata1.00: configured for UDMA/100
[ 11.139723] sd 0:0:0:0: [sda]
[ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
[ 11.139728] sd 0:0:0:0: [sda]
[ 11.139730] Sense Key : 0xb [current] [descriptor]
[ 11.139733] Descriptor sense data with sense descriptors (in hex):
[ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.139743] 5e 89 08 d4
[ 11.139747] sd 0:0:0:0: [sda]
[ 11.139749] ASC=0x47 ASCQ=0x0
[ 11.139751] sd 0:0:0:0: [sda] CDB:
[ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
[ 11.139761] end_request: I/O error, dev sda, sector 1586038992
[ 11.139889] ata1: EH complete
[ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
[ 11.153169] ata1.00: irq_stat 0x40000008
[ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
[ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.153306] ata1.00: status: { DRDY ERR }
[ 11.153345] ata1.00: error: { ICRC ABRT }
[ 11.153386] ata1: hard resetting link
[ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.749884] ata1.00: configured for UDMA/100
[ 11.749918] sd 0:0:0:0: [sda]
[ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
[ 11.749923] sd 0:0:0:0: [sda]
[ 11.749925] Sense Key : 0xb [current] [descriptor]
[ 11.749928] Descriptor sense data with sense descriptors (in hex):
[ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.749938] 5e 89 08 28
[ 11.749942] sd 0:0:0:0: [sda]
[ 11.749944] ASC=0x47 ASCQ=0x0
[ 11.749946] sd 0:0:0:0: [sda] CDB:
[ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
[ 11.749956] end_request: I/O error, dev sda, sector 1586038824
[ 11.750093] ata1: EH complete
[ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 11.763206] ata1.00: irq_stat 0x40000008
[ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
[ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.763343] ata1.00: status: { DRDY ERR }
[ 11.763382] ata1.00: error: { ICRC ABRT }
[ 11.763424] ata1: hard resetting link
[ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.360321] ata1.00: configured for UDMA/100
[ 12.360370] sd 0:0:0:0: [sda]
[ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
[ 12.360375] sd 0:0:0:0: [sda]
[ 12.360377] Sense Key : 0xb [current] [descriptor]
[ 12.360380] Descriptor sense data with sense descriptors (in hex):
[ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.360390] 5e 89 08 c8
[ 12.360394] sd 0:0:0:0: [sda]
[ 12.360395] ASC=0x47 ASCQ=0x0
[ 12.360398] sd 0:0:0:0: [sda] CDB:
[ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
[ 12.360407] end_request: I/O error, dev sda, sector 1586038984
[ 12.360543] ata1: EH complete
[ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.370005] ata1.00: irq_stat 0x40000008
[ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
[ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.370143] ata1.00: status: { DRDY ERR }
[ 12.370182] ata1.00: error: { ICRC ABRT }
[ 12.370224] ata1: hard resetting link
[ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.959379] ata1.00: configured for UDMA/100
[ 12.959426] sd 0:0:0:0: [sda]
[ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
[ 12.959432] sd 0:0:0:0: [sda]
[ 12.959433] Sense Key : 0xb [current] [descriptor]
[ 12.959437] Descriptor sense data with sense descriptors (in hex):
[ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.959447] 63 89 08 3a
[ 12.959462] sd 0:0:0:0: [sda]
[ 12.959464] ASC=0x47 ASCQ=0x0
[ 12.959466] sd 0:0:0:0: [sda] CDB:
[ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
[ 12.959476] end_request: I/O error, dev sda, sector 1669924920
[ 12.959616] ata1: EH complete
[ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
[ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.973247] ata1.00: irq_stat 0x40000008
[ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
[ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.973384] ata1.00: status: { DRDY ERR }
[ 12.973423] ata1.00: error: { ICRC ABRT }
[ 12.973464] ata1: hard resetting link
[ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.569691] ata1.00: configured for UDMA/33
[ 13.569750] sd 0:0:0:0: [sda]
[ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
[ 13.569755] sd 0:0:0:0: [sda]
[ 13.569757] Sense Key : 0xb [current] [descriptor]
[ 13.569761] Descriptor sense data with sense descriptors (in hex):
[ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 13.569771] 5e 89 08 c0
[ 13.569775] sd 0:0:0:0: [sda]
[ 13.569777] ASC=0x47 ASCQ=0x0
[ 13.569779] sd 0:0:0:0: [sda] CDB:
[ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
[ 13.569789] end_request: I/O error, dev sda, sector 1586038976
[ 13.569933] ata1: EH complete
[ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
[ 13.583360] ata1.00: irq_stat 0x40000008
[ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
[ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 13.585478] ata1.00: status: { DRDY ERR }
[ 13.585516] ata1.00: error: { ICRC ABRT }
[ 13.585558] ata1: hard resetting link
[ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.180020] ata1.00: configured for UDMA/33
[ 14.180069] sd 0:0:0:0: [sda]
[ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
[ 14.180074] sd 0:0:0:0: [sda]
[ 14.180076] Sense Key : 0xb [current] [descriptor]
[ 14.180079] Descriptor sense data with sense descriptors (in hex):
[ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.180089] 63 89 08 30
[ 14.180094] sd 0:0:0:0: [sda]
[ 14.180095] ASC=0x47 ASCQ=0x0
[ 14.180098] sd 0:0:0:0: [sda] CDB:
[ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
[ 14.180108] end_request: I/O error, dev sda, sector 1669924912
[ 14.180245] ata1: EH complete
[ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
[ 14.190153] ata1.00: irq_stat 0x40000008
[ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
[ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.190290] ata1.00: status: { DRDY ERR }
[ 14.190328] ata1.00: error: { ICRC ABRT }
[ 14.190371] ata1: hard resetting link
[ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.779168] ata1.00: configured for UDMA/33
[ 14.779214] sd 0:0:0:0: [sda]
[ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
[ 14.779218] sd 0:0:0:0: [sda]
[ 14.779220] Sense Key : 0xb [current] [descriptor]
[ 14.779223] Descriptor sense data with sense descriptors (in hex):
[ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.779233] 63 89 08 80
[ 14.779237] sd 0:0:0:0: [sda]
[ 14.779239] ASC=0x47 ASCQ=0x0
[ 14.779241] sd 0:0:0:0: [sda] CDB:
[ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
[ 14.779251] end_request: I/O error, dev sda, sector 1669924976
[ 14.779391] ata1: EH complete
[ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
[ 14.793513] ata1.00: irq_stat 0x40000008
[ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
[ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.793651] ata1.00: status: { DRDY ERR }
[ 14.793690] ata1.00: error: { ICRC ABRT }
[ 14.793733] ata1: hard resetting link
[ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.378218] ata1.00: configured for UDMA/33
[ 15.378240] sd 0:0:0:0: [sda]
[ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
[ 15.378245] sd 0:0:0:0: [sda]
[ 15.378247] Sense Key : 0xb [current] [descriptor]
[ 15.378250] Descriptor sense data with sense descriptors (in hex):
[ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.378260] 63 89 08 28
[ 15.378264] sd 0:0:0:0: [sda]
[ 15.378266] ASC=0x47 ASCQ=0x0
[ 15.378268] sd 0:0:0:0: [sda] CDB:
[ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
[ 15.378277] end_request: I/O error, dev sda, sector 1669924904
[ 15.378427] ata1: EH complete
[ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
[ 15.390148] ata1.00: irq_stat 0x40000008
[ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
[ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.390285] ata1.00: status: { DRDY ERR }
[ 15.390324] ata1.00: error: { ICRC ABRT }
[ 15.390366] ata1: hard resetting link
[ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.977410] ata1.00: configured for UDMA/33
[ 15.977500] ata1: EH complete
[ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
[ 15.986916] ata1.00: irq_stat 0x40000008
[ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
[ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.987054] ata1.00: status: { DRDY ERR }
[ 15.987093] ata1.00: error: { ICRC ABRT }
[ 15.987135] ata1: hard resetting link
[ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.576437] ata1.00: configured for UDMA/33
[ 16.576509] sd 0:0:0:0: [sda]
[ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
[ 16.576514] sd 0:0:0:0: [sda]
[ 16.576516] Sense Key : 0xb [current] [descriptor]
[ 16.576519] Descriptor sense data with sense descriptors (in hex):
[ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.576529] 63 89 08 20
[ 16.576533] sd 0:0:0:0: [sda]
[ 16.576534] ASC=0x47 ASCQ=0x0
[ 16.576537] sd 0:0:0:0: [sda] CDB:
[ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
[ 16.576546] end_request: I/O error, dev sda, sector 1669924896
[ 16.576642] ata1: EH complete
[ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
[ 16.586847] ata1.00: irq_stat 0x40000008
[ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
[ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 16.586980] ata1.00: status: { DRDY ERR }
[ 16.587018] ata1.00: error: { ICRC ABRT }
[ 16.587058] ata1: hard resetting link
[ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.175907] ata1.00: configured for UDMA/33
[ 17.175963] sd 0:0:0:0: [sda]
[ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
[ 17.175968] sd 0:0:0:0: [sda]
[ 17.175970] Sense Key : 0xb [current] [descriptor]
[ 17.175973] Descriptor sense data with sense descriptors (in hex):
[ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 17.175983] 5e 89 08 54
[ 17.175987] sdI have only Arch installed, 64 bit, UEFI boot.
The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
Sep 24 06:13:59 kernel: ata6: hard resetting link
Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:13:59 kernel: 00 00 0e 87
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
Sep 24 06:13:59 kernel: ata6: EH complete
Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6: hard resetting link
Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
and so on... It somehow booted, but now journalctl says:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
while the Error hasn't occured yet.
I think I wil take the emergency procedure, and start backing up my files and system ...
I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse. -
Unable to Start CE 7.1 Server on Windows 7 / Vista OS
Dear All,
I am trying to install CE 7.1 Server (Java Stack) on my personal laptop ( Windows 7 Home Basic, Intell Core i3 processor, 4GB RAM).
In the 1st attempt ,the installation failed on Windows 7 OS due to incompatible OS errors.
So, I installed VMWare 6.5 Workstation, installed Windows Server 2003 OS on it and again tried to install CE 7.1 server on this virtual Windows Server2003 OS.
Though CE Server got installed properly and the portal was running when I tested the portal just after installing the CE Server for the first time, ( i.e. without the System restart) ,
But the CE Server is not getting started after restarting the Windows Server 2003 OS ( through VMWare ) or on system restart.
On Analysis, we observe that jstart.exe process is stopped while other services ( message service and enqueue service ) are running.
( jstart service initially shows Starting... but then goes into a Stopped state ).
I have even tried to install CE Server on another laptop ( Windows Vista , Core 2 Duo Processor )
Here, the CE Server got installed ( no need of VMWare )and even the portal was running when I logged in it immediately after installing the CE server for the first time. ( Without System restart )
But like in previous case , when I tried to start the CE server again( After restarting the PC ), I faced the same problem -- CE server did not start reason being jstart service remained in stopped state.
Is this (jstart service) the main cause for Server not getting started ?
Can we start this service manually ?
Is there any system properties or Windows service which is conflicting with the jstart service ?
Is there any alternative method to install CE Server on Windows 7 / Vista OS ?
Please help ...
Thanks and Regards,
Navin MittalHi Navin,
Please verify the DB service is running. The database service is not set to automatically start so it would not be running when you restarted the server. Go to 'Services' windows application and either start the DB service manually or set it to start automatically.
HTH.
O. -
I downloaded the newest iTunes to Windows 7 and tried to run it. I received a R6025 error message.
Hello Spelly78,
It sounds like you are unable to install the latest version of iTunes using Windows 7 due to this error message. I would use the troubleshooting in the following article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Here is a general overview of the troubleshooting to be done:
General installation troubleshooting
Empty your Temp folder and restart your computer.
Completely remove iTunes and its related components.
Install the latest version of iTunes.
Additional troubleshooting
After performing each of the steps below, you'll need to remove iTunes and its related components and install iTunes again to determine whether the issue was resolved.
Make sure you have an administrator account.
Make sure your folder names don't contain unusual characters.
Get the latest Windows updates.
Disable conflicting software.
Thank you for using Apple Support Communities.
Regards,
Sterling -
How do i import my library from an external hard drive. Had to export it as had to reinstal windows due to a conflict between windows and i-tunes. Wen i try to import nothing happens despite selecting the file. Can you import from an i-phone to i-tunes?
What do you mean bye exported the library?
There is nothing to export or import.
The correct process to backup the iTunes library would be to copy the ENTIRE iTunes folder from the computer to the external drive. -
Radeon HD 8750m switchable graphics driver BY HP is not working on Windows 8.1
Hello all,
I have laptop Envy 6-1200el.
It's a good machin but I have always been annoyed by video drivers trouble.
When I bought my PC last year it worked good when we had Windows 8, but the video drivers didn't work properly already there.
The drivers made troubles when I tryed to start some 3D applications as Batman: Arkham Asylum. The problem was the HP video driver. That driver is made by Radeon HD drivers plus Intel HD 4000 series all together.
To make the two video cards working together properly you cannot use intel driver installation first then the AMD catalyst installation utility, but you need a driver installation utility that installs the two video cards both, otherwise the switchable graphics will not work properly and 3D applications won't start.
When I had Windows 8.1 update I had absolutely to find a new driver. I downloaded the automatic utility from AMD site and luckily it downloaded an updated driver that was including and installing together both the video cards properly. Since there my laptop started to work very good in everithing.
Some days ago I had to format my PC and that good video driver got lost.
I installed almost everithing including windows 8.1 update but I sadly discovered that on AMD site it was downloadable only the Radeon HD driver not including any more switchable graphics installation and Intel HD driver.
I have now installed the video driver given by HP on the right laptop portal, but this driver IS SO BAD!!!
HP says that it's an update driver working properly on Windows 8.1 but it's false!
MY PC WITH THAT HP DRIVER IS MAKING MANY TROUBLES:
- 3D GAMES ARE NOT STARTING OR NOT WORKING PROPERLY;
- PASSING THE MOUSE ON THE NEW START BUTTON ON WINDOWS 8.1, THE BUTTON BECOMES BLACK!
- HP UTILITY CENTER IS NOT OPENING;
- HP SUPPORT ASSISTANT IS NOT WORKING PROPERLY;
- THE SYNAPTICS MOUSE DRIVER DOESN'T WORK PROPERLY, THE DOUBLE TOUCH DOESN'T WORK ETC.;
- iNTEL DRIVERS INCLUDED ON THAT HP PACKAGE ARE OLD;
- SWITCHABLE GRAPHICS DOESN'T WORK GOOD AND IS NOT ABLE TO ADDRESS SOME 3D CHARGES TO THE RIGHT CARD.
PLEASE HP RELEASE AN UPDATE! pLEASE MAKE A REAL COMPLETE DRIVER THAT IS REALLY ACTUAL AND IS REALLY WORKING ON WINDOWS 8.1 WITHOUT CONFLICTS, WITHOUT GRAPHICS ERRORS ETC.!!!
THIS SITUATION IS UNACCETTABLE, SOLVE IT PLEASE!Hi Fotoji,
I want to be honest, it's very disappointing for me to be treated like a child.
You should know that most of the people you meet here in this forum are not n00bs and the causes you suggest to consider haveall already been excluded in every way you would try yourself too!
The fact you say, that the issues are caused by a 'broken OS' are so disappointing and unbelievable!
I work in IT field since I was 14yo and now I am a graduated 28 who knows very well how to handle a PC in a clean and smart way.
Look, many of these issues was already 'on' when I bought and started my PC for the very FIRST TIME.
The video drivers needed are auto-installing drivers containing intel and AMD video drivers both and installed together at the same time.
The first day I had my PC the system was VIRGIN, I simply installed steam then ran 'Batman:Arkham Asylum' to make a try, it has never ran up, no matter if the OS is W8 or W8.1, no matter if the PC is new or used for 6 months, that driver has never worked good.
I tryed many things, used HP recovery manager several times in order to make a clean OS new installation, but it always went like that.
Recently I sent my computer to HP Italy fro an hardisk problem, replaced in warranty. The laptop came back CLEAN, perfect, with W8.1 and all the new recent drivers.
The problem was the same, games did not run or ran badly, the start symbol was black, HP Utility Center didn't work.
So tell me where's the magic when I unistall in a CLEAN AND CORRECT way those video drivers, why EVERITHING COMES TO WORK SO GOOD BACK????
Some months ago I knew that those drivers where so bad so I tryed to download the original driver package from AMD site, hoping that they was including the intel video drivers both, and guess...IT WORKED!
Those drivers was including the intel video drivers too during installation, then after a restart I had NO GRAPHICS ERROR, NO HP UTILITY CENTER FREEZE, ANY GAME OR 3D APPLICATION WORKED AT LEAST 2x FASTER AND NOT ANY COMPATIBILITY PROBLEM IN ANY STATE OR SITUATION.
Unfortunately my laptop started to have maybe some motherboard power problems and my HDD passed away then HP took my pc and fixed it.
When it came back it was perfect again, virgin, with all the update installed, with those bad HP drivers installed again, so with all those problems that I found since I bought it: graphics error, compatibility problems, some programs freeze, all WHITOUT TOUCHING ANYTHING!!!
I knew that I would solve it just downloading the right drivers directly from AMD site but UNLUCKILY THE NEW CATALYST 14.4 DIDN'T INCLUDE THE INTEL VIDEO DRIVER ANY MORE.
I had all those compatibility, stability and graphics problems always with a just-formatted computer with all the updates installed, a virgin untouched machine just formatted completely automatically using HP recovery manager or fixed by your engeneers!!!
The only case everithing worked very good was when I used the original AMD's drivers, when these used to inclued the intel graphics drivers too during AUTO-INSTALLATION.
I am replying now using a just-formatted machine automatically and perfectly just using HPRECOVERY MANAGER,and updated using WINDOWS UPDATE and HP SUPPORT CENTER self updater.
So guess what???? When I uninstall in A CORRECT WAY your HP video drivers (doesn't matter if the new one or the oldest) everything works good back, and when I used original AMD drivers everything worked so good.
It's so hard to do something wrong about it, the driver installation utility are IDIOT-PROOF, you cannot do anything during installation except for clicking the RESTART button.
So AMD used to make perfect drivers and now not any more, sadly, every issue disappears without your driver installed, HP sent me a perfect virgin computer with the same issues.
So please, don't tell me that AMD is able to make better software, don't tell me HP is not able to handle a recovery and sent me a pc with the same issues, don't tell me I probably made a bad use of my VIRGIN laptop after years spent on SGI workstations UNIX based.
I know how to keep a pc clean, and I'm telling you something more: the new synaptics mousepad driver package you are giving from HP website and HP support center DOESN'T WORK GOOD TOO!!!
Once you accept the auto update it starts with the self installation, but after the restart gess what?? The double toe gesture used to simulate the right click doesn't work any more!!!
No matter if you try to change any option in the control panel, no matter if you have windows 8 or 8.1, just try to unistall that and reinstall the old synaptics mouse driver and, OH WOW MAGIC, IT WORKS GOOD BACK AGAIN!!!
So now what?
Are you thinking that HP engeneers who fixed my laptop wasn't able to re-install windows and drivers?
The IT engineers working for HP are maybe also n00bs that can't handle a pc format and send me a BROKEN OS as you said?
I am magically breaking my os system just clicking one time on clean automatic HP recovery button then click on the automatic update buttons twice????
Perhaps AMD is able to make more stable end recent drivers than HP does???
(considering that aven the last HP graphics drivers update is so bad because the intel side of the package is very old and you can recognize it just making a comparison with the new intel additional control panel!)
I don't need to recover the system for the 4th time in a proper way (plus HP fix would be the 5th!), I know these silly things.
I need to be taken seriously and not be treated like a grandmother who's not able to switch-on a smartphone!
I would challenge anyone to operate on my computer and try to solve it using Teamviewer and HP's drivers!
I think I've been quite hard nut hopefully clear, so please do something more than giving me a manual fro grannies.
Thank you. -
Fix sync center's errors/conflicts through server
Hi all,
Our system relies on folder redirection and roaming profile.
I can see some type of errors/conflicts on sync center, such as an error states "cannot access the file because it's being used by another process", a conflict asking delete/keep one/keep both file(s).
The person used to work before me said, he checks every single end user's computer every day for checking those errors/conflicts and resolving.
I wonder is there any place that I can check the status of syncing, and solve it through server instead of checking every computer physically.
Our server is 2012 R2, user computers are win7 or 8.1 pro.
Thank you very much for your answer in advance.Hi JJay1231,
You can view sync errors on the Sync Results screen in Sync Center. Once you understand what is causing the sync error, you can try to fix it. A sync error usually occurs when
there is a problem with the device, computer, or folder you are trying to sync with, such as a device that is not plugged in or turned on when you try to sync with it. Errors usually block sync from completing. If you have a sync error that you don't fix,
you will probably end up with files that are not in sync, so it's a good idea to try to fix sync errors when they occur.
Resolving sync conflicts: frequently asked questions
http://windows.microsoft.com/en-us/windows-vista/resolving-sync-conflicts-frequently-asked-questions
Troubleshoot sync problems
http://windows.microsoft.com/en-us/windows-vista/troubleshoot-sync-problems
Event ID's 1502 and 1508 User Profile does not load properly on Windows Server 2008 Terminal Server non roaming profiles
https://social.technet.microsoft.com/Forums/windowsserver/en-US/955c99c0-cd7d-4aad-9517-067990008a91/event-ids-1502-and-1508-user-profile-does-not-load-properly-on-windows-server-2008-terminal-server?forum=winserverTS
When you use roaming profile please use the following supported scenario.
Microsoft’s Support Statement Around Replicated User Profile Data
http://blogs.technet.com/b/askds/archive/2010/09/01/microsoft-s-support-statement-around-replicated-user-profile-data.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Firefox 5 on Windows XP hangs when selecting Tools - Options
Firefox starts up okay. I can browse web sites okay. However, when I select the menu option "Tools" and then select "Options", Firefox hangs, the Options window does not appear, and I have to do a forced close of Firefox.
Cor-el
Thanks, but that does not work. In fact I have now tried Firefox v3.8, v4.0, v4.1 and v5.0 and found that selecting Tools / Options causing Firefox to hang completely on every occasion. I have tried starting each of these in in Safe Mode but this does not solve the problem.
What does Firefox do when opening the Tools / Options window that could possibly conflict with something else I have on my PC?! This is completely baffling. -
Adobe 6.0 won't work with windows 98
I bought 6.0 without reading the fine print. When I tried to install it, I found out that I need Windows 2000 or higher. I can't upgrade to windows 2000 due to conflicts with other programs I'm running. Does anyone have any ideas on how to make 6.0 work with WIndows 98, or how to get an older version of Adobe?
Thanks!This forum is for questions or comments related to Installshield Tuner
for Adobe Acrobat, remote installations of Acrobat via SMS or Tivoli,
or the hosting of Acrobat products via Windows Terminal Services or
Citrix MetaFrame XP.
Note: Questions pertaining to the individual installation, use or
features of Adobe Reader or Acrobat should be posted within the
specific forum for the product you are using
Aandi Inston -
Unable to resolve sync conflict in 10.5.1
Using 10.5 sync is now reporting a "conflict" which needs to be resolved. When I select "review conflicts now" it does launch the "conflict resolver" but has no open window to select the conflict and resolve it. Is there a plist or something I can clean up to get rid of this phantom warning? I have been able to see the conflict resolver window before and clear up conflicts.
Thanks!Had the same problem, Launched iSync and reset the sync history and now it works, took a bit to get the data synced between entourage and ical and had to delete some duplicates but it worked for me
isync>prefrences>reset sync history
hope it works for you
S -
JRE 1.4.1 causes windows 98 to hang
I just installed the latest JRE 1.4.1, now every time I use the one Java program I have my computer hangs. Sometimes I can open it and then close before the hang - then I get a ddhelp.exe is not responding error message. Tried uninstalling and reinstalling all sorts of things without success. Only solution that works is to reduce the graphics hardware acceleration to the "basic" setting, but then other software I have that has heavy graphics requirements does not work.
Any idea what is wrong?
I run windows 98SE, Radeon7500 graphics card, AMD1700 processor. May also have a related problem - the windows update site keeps telling me to install a Java VM update dated March 4 that has already been installed so maybe something is not registered properly but then I have reinstalled most things luding this update) without success.JRE 1.4.2_07 crashed Windows XP-SP2, with a graphics device driver operating ATI Radeon 9800 XT (Driver Name: ati2dvag.dll).
Further tech details below this message.
The Sun Java web sites suggested the next java version upgrade to fix the crash problem.
This forum provided the solution that is very applicable to the latest Windows XP, SP2 as with the Windows 98 SE problem: Conflict with DirectX. The JRE1.5 Contol Panel was a "ghost screen" until I the following process worked to display the window contents:
"After spending the last few hours trawling through forums and newsgroups I noticed a lot of debate about how a certain Windows graphics software called DirectX may be <in conflict> with the JDK/JRE."
1. Click Start, and then click Run.
2. Type dxdiag, and then click OK
(Microsoft Article ID : 157730
Last Review : September 29, 2004
Revision : 5.1 )
(or try- Open the Windows help and type in DirectX.)
( Click on 'troubleshooting DirectX'.)
(Click on 'Open the DirectX Diagnostic Tool'.)
Once this tool opens click on the Display tab
and then disable 'DirectDraw Acceleration'
and 'Direct3D Acceleration'.
Now to resolve the "noinit" applet errors.
Thank you Forum participants!!
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs)
Display: 256MB DDR ATI Radeon 9800 XT
Memory: 1022MB RAM
Page File: 326MB used, 2137MB available
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DxDiag Version: 5.03.2600.2180 32bit Unicode
++++++End input.+++++++++++++++++++++++++
Maybe you are looking for
-
Mac Mini's Airport Extreme card extremely inconsistent, for some reason
Hi there. I am the owner of a late 2006 Mac Mini, which is currently running OS X 10.4.11. Up until about 2 days ago, the wireless internet connection was perfect. Then, I started noticing that pages would not load, sometimes (mostly) very slowly,and
-
Hi Experts, I have created one statistical internal order. And used it while doing vendor down payment. Now after that internal order is closed. And Vendor Invoice is created. I want to clear this invoice with downpayment, but it says Posting not all
-
I am updating pld of purchase order.I want attach a document specifying certain conditions.This document should be issued time a po is created.How to attach this document ? Regards, Dilip Kumbhar
-
I have been wishing for one simple thing since aperture came out...being able to print with a black (or other color) border instead of white. Is there a simple way to do this that I am missing? with photoshop its right there in the print controls whe
-
Itunes does not synchronize offline PSE 7.0 photos
In iTunes 8 (version 8.0.2.20), the photo sync feature allows to synchronize photos from a Adobe Photoshop Elements (PSE) album (e.g. version 7.0) and copy them onto your iPod. Improvement suggestion However, if your photo files happen to be backed u