Windows 7 RTM (Build 7600) and iTunes 9.0

Been running iTunes 8 with no problems under Windows 7 RTM, But after installation of iTunes 9, Boy what a mess. Can only play one track at a time regardless of Albums origin (CD, Itunes store etc). Genius Doesn't work, iTunes DJ not working, Genius Mix not working. Anybody else using this operating system experiencing same problems

The problem where Genius says, "Genius results can't be updated right now. The required file cannot be found." is related to BranchCache.
Disable BranchCache and try again.
You can find a bit more on BranchCache here:
http://technet.microsoft.com/en-us/library/dd637820%28WS.10%29.aspx
You can disable it from an administrative command prompt with "netsh branchcache set service mode=DISABLED."
Best of luck

Similar Messages

Windows 7 Build 7600 [HELP!]

Long story short, my Acer Aspire laptop was stolen November 4th, then recovered just a few weeks ago. The man whole stole it completely erased my Windows 7 and replaced it with 'Windows 7 Build 7600' - yes, I know it's illegal. My laptop is still in good condition, and because it's so nice I'm hoping to repair it. What I want to know is -
-How would you delete Windows 7 Build 7600
-Do I have to re-purchase Windows 7
-How do I get my Wifi to work -- [I have a button on my laptop, it won't turn on. No, the button isn't broke. I believe my driver for Wifi was deleted...]
-How much would this cost? Could Best Buy solve this for me?
No, I have no warrenty on it. I got it about 5 years ago, the warrenty is expired. No, I have no reciept, I did not purchase this laptop, my friend's church group bought it for me.
Any advice would be helpful! Thank you!

Quote :Acer
Lol
http://us-store.acer.com/rcd/
Head there and follow the instructions to order the recovery media.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

HT6424 Can I restore my pc windows 7 with icloud and itunes match?

Can I restore my pc from I cloud, I have windows 7, icloud and itunes match.

Hi ..
No.
Hopefully you have a restore point setup > System Restore - Microsoft Windows

No Password entry option Windows 10 build 10041 (and 10049) unable to log in

Hello. I upgraded using the automatic process from within Windows 7 home premium. I'm using an All-in-one machine with 4gb RAM and 3.10ghz Core i3.
Initially I had a local account with no password, which automatically logged me in from start up. Everything ran smooth and well. I switched to a microsoft account which requires a password, in order to install apps from the Metro store.
I shutdown overnight, and return the next morning, and I'm faced with the usual screen. A large image, few icons. I swipe upwards on screen or press space to move along and log in. My username is presented to me, but the password input field is missing.
It says "Andrew" and has my email beneath it, but the password box is just not there. I clicked the screen randomly but nothing showed up. I've tried typing anyway but still nothing.
This left me comlpletely unable to sign in and use windows. In dire need of a PC to use, I activated a workaround which allowed me to use cmd without logging in and used the /active command on the hidden administrator. This is the only accessible use of
my PC I've got, and my files are buried deep within C:/users/..... and so on.
As per the title, I also had this issue in build 10049 but I had to revert back since I locked the PC using window+L out of habit, and I couldn't log back in. I reverted back to 10041 since having restarted the PC from being locked out, I encountered
boot loop.

Andrew754,
Are you saying that you are now in build 10041, and that you are unable to login because there is no option to enter the password ?
If yes, have you tried...... press Ctrl + Alt + Delete keys ?
Will that bring you back to normal sign in screen ?

Windows Vista RTM (Build 6000) and Cisco VPN Client 5.8.01.0590

I've sucessfully installed the above client and can access one of my VPN connections on TCP/10000 but I am unable to access any of my UDP enabled profiles.
Anyone have any ideas??

In the VPN client click on Under transport tab see if the IPsec over UDP is enabled.For more information refer URL
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml#vpnclient

Windows 7 Build 7600 Windows is not Genuine

these are the results when i ran MGADiag, what should i do next? this incident happened when an update was installed.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0xc004c4ab
Windows Product Key: *****-*****-X92GV-V7DCV-P4K27
Windows Product Key Hash: aU2z1/fnhnLHmhBm699qYZT2E6s=
Windows Product ID: 00426-OEM-8992662-00400
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {135ACAAF-62BA-4CED-9BBE-EAAA3B56CE09}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7600.win7_gdr.130318-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{135ACAAF-62BA-4CED-9BBE-EAAA3B56CE09}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7600.2.00010100.0.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-P4K27</PKey><PID>00426-OEM-8992662-00400</PID><PIDType>2</PIDType><SID>S-1-5-21-666988617-2036336794-587057917</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron N3010</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A09</Version><SMBIOSVersion major="2" minor="6"/><Date>20101018000000.000000+000</Date></BIOS><HWID>45BB3607018400FC</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Malay
Peninsula Standard Time(GMT+08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>QA09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7600.16385
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600400-02-1033-7600.0000-0112012
Installation ID: 019624432716018062731135949545268905986324889016121652
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: P4K27
License Status: Notification
Notification Reason: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 2
Trusted time: 2/9/2014 11:45:24 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4AB
HealthStatus: 0x0000000000000000
Event Time Stamp: 2:9:2014 01:42
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEAAgABAAEAAQABAAAAAwABAAEAeqjgZE40rnSIgox8aLreiHIN4EQ8M+6NXF0=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC PTLTD
APIC
FACP INTEL
CRESTLNE
HPET INTEL
CRESTLNE
BOOT PTLTD
$SBFTBL$
MCFG INTEL
CRESTLNE
SPCR PTLTD
$UCRTBL$
SLIC DELL
QA09
OSFR DELL
DELL
ASF! CETP
CETP
SSDT PmRef
CpuPm
this is the ID:
00426 OEM 8992662 00400

Hi,
The report shows that the current install is
counterfeit, how did you active this Windows? if it is actived by hacker's Activation Exploit, then the only thing you can do is to reinstall with a
genuine one.
if you bought this from a vender or someone, you can contact them for your rights.
Meanwhile, as Team ZigZag said, you can get more professional answer in genuine Windows 7 forum.
Regards
Yolanda
TechNet Community Support

Windows 7 Gold code and Itunes

About to upgrade my development pc to Windows 7 RTM, I have itunes installed on the machine to sync with my iphone - amd I going to run into any issues with the application and windows 7?
This is RTM code, not RC or beta.

DBrooks wrote:
Well, I've had zero issues using Win7 RC, can't imagine something is broken with RTM.
hoping you are right, but have been in this business way to long to be anything but a firm believer in O'Toole's Law - which basicly states - Murphy was a Optimist.
Thanks will cross fingers

Windows Vista, Ipod Connectivity and Itunes 7.1

Hi,
I was going to buy windows vista but my friend informed my that Windows vista and itures creates some connectivy problems with the ipod.
I was just wondering if this is/was true ?
If it is/was true, has then recently new I-tunes 7.1 update fixed that problem, or should i wait for the next update before buying vista ?
many thanks

I have a new Dell with Vista pre-installed & the ONLY thing not working properly is my iPod. iTunes 7.1 works fine. My songs are there, I can play & download without issue. And I really like the iTunes gadget on the sidebar (although it's certainly a live-without item that's not needed). However, I am currently unable to sync my iPod. It hasn't been able to sync since I got the new system. I have run every diagnostic possible & it still won't sync. I am tempted to restore & see if that will help but frankly I am unwilling to lose the 5000 songs that're already on it without being sure that it will take them back. So... I'm at an impasse. However, the rest of my software all works faster, cleaner- a great improvement over my old system although I understand that I am the exception not the rule. I happen to like my Vista a lot, other than that ONE bug which I'm sure will be fixed soon.

Windows 7 64 Bit and iTunes 11.1.5 and Phone are not able to Sync

I am having issues with my iPhone 5S sync to my iTunes. I pull up iTunes and then a couple of minutes or so will show my iPhone 5S so when I go to Sync it with iTunes and my computer via WiFi it falls off and will not sync. This happens all the time. Only way my phone will sync to the computer is that I got to plug the phone in to the usb cord and connect it to my computer so I can sync it whenever I need to. Is this a bug that Apple has yet to fix or what? Anybody else have the issue? Also I do not get the icon for to share speakers or whatever by the slider for volume just above the menu bar, is this a bug/flaw as well? All this has been happening from the very start.

I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

Windows Vista Movie Maker and Itunes Music

I am asking for help and apologize if I am in the wrong area - we just purchased a computer and I need some help - we have an HP that came w/ Windows Vista. I am trying to make a movie on Windows Movie Maker and tried to import a song from Itunes that I purchased and it keeps coming up w/ an error about my system not having the codec. I have no idea what this means and need to know if I am doing something wrong. Any help/direction would be greatly appreciated-I am trying to make a movie w/ my all my daughters pictures-she will be 1 this month-I know TMI, sorry. Thank you again

Well, there are two problems probably:
1. I'm not sure if Windows Movie Maker can use AAC format files, and all of the files you download through iTunes are in AAC format.
2. Even if Windows Movie Maker can use AAC format files (which I doubt it can), the AAC files through iTunes are DRM-encoded, which means they have copywrite protection which prevents their use outside of a specific set of iPods/iTunes.
If you want to use that particular song in your movie, it would be best to either find a source that is not copy-protected to download it from (notice I didn't suggest downloading it illegally ;>), or ... you can buy a CD with that song on it, and then rip it to MP3 to import into Windows Movie Maker.

Windows 7 x64 bit and iTunes not recognizing iPhone 3GS

Hello,
I'm sorry to bring this up again and I know the community has seen it a million times but I'm definately needing someone to point me in the right direction. I have an Acer 5552 Laptop with Windows 7 x64 bit. It does not have the Intel P55 chipset as what I have read before in these discussions, so updating the BIOS will not work. I have tried uninstalling and reinstalling iTunes x64 bit, removed and reinstalled the drivers and Apple Mobile Support software (which should do it by removing iTunes as a whole) and whenever I hook my iPhone to my laptop for a second sync it takes a long time to back up and then it gives an error, then when i try to connect it again iTunes says that the iPhone cannot be recognized and needs to be restored. I have done this 3 times in the past 2 months. This is a brand new laptop that I have. There should be no reason for this to happen unless I'm missing something. Is there any workaround to this? for the time being I'm syncing everything on an old, slow desktop that has Windows XP. It's worked with my old laptop which had XP on it great but sadly I gave my old laptop to my dad which he now uses to sync his iPhone with now.
Any help would be greatly appreciated..also if anyone has the same laptop model I have and have Windows 7 x64 on it..please let me know what you did if you got your 3GS to sync all the time with no problems.
Thank you very much.

4 days and no response...really??

Partitioning mac mini, running windows xp in one and itunes mac version

i want to be able to operate my work pc (windows XP professional) via vpn I am required by my company to have vpn access to my desk top at work as part of our emergency preparedness policy. I would not use it often. I thought this is a less expensive alternative to buying a pc. the other use i want is to load itunes onto the other partition. operate it via wifi from my iMac across the room so i can place it near my 1080HD sony bravia52xbr3, to connect the itunes visualizer to the tv via hdmi-dvi or does anybody have real knowledge about the feasability of my plan?
imac G5 1.8mhz Mac OS X (10.4.8) wireless keyboard and mouse

You don't mention if your mini is an intel or ppc based mini. If you have an intel machine, you can use BootCamp to easily repartition your mini's drive and create a FAT32 or NTFS partition to install WinXP. You need a full install disk with at least SP2 (refer to the boot camp requirements here: http://www.apple.com/macosx/bootcamp/ ). If you have a PPC based mini, well....you could find a copy of VirtualPC and install it but the performance is dismal.
As far as the iTunes issue goes, I'm no guru for iTunes, but I don't think you can set up the mini to act like an airport express. You can share music library's but to actually control the mini, you would probably need something like Apple Remote Desktop or Timbuktu. I have my old PPC mini connected to my HDTV and audio system and control it via Timbuktu from my main desktop in my ome office. The main computer has sharing enabled and I simply control the mini to start playing the shared library over the wireless network.

How to merge music from a My Music (Windows media audio files) and iTunes?

Purchased some music from iTunes music store and I am hoping to get them on my MP3 player that is NOT an iPod. Is there a way to do this? I want to have these songs as well as songs from my My Music folder (Windows media audio files) on my MP3 player....
I know I cannot move the music from iTunes to the My music.... (well I can but when I click on them to play, iTunes comes up)
I know that iTunes is not compatible with my MP3 player....
anything besides burning a disc (which I am not sure my computer can do...)?
thanks in advance, Megan

Purchased some music from iTunes music store and I am hoping to get them on my MP3 player that is NOT an iPod. Is there a way to do this? anything besides burning a disk?
Sorry but no, there isn't. Tracks from the iTunes Music Store (as they are with any other legal download store with major-label content) are copy protected and so can't be directly converted. The only way to get them into another format is to burn them to an audio CD, so if your computer doesn't have a CD burner, then you're stuck, I'm afraid.

My itunes works, but when I click to go to the store, it says windows has stopped working and itunes closes out all together and i cant figure out why

please help

I'm expreriencing the same conditions with the same environment. Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT. I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
My iTunes StoreS from my iPhones ARE OK.
I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions....

Windows 7 RTM (Build 7600) and iTunes 9.0

Similar Messages

Maybe you are looking for