Windows 7 Service pack1 forx64 based systems (KB976932) failed. Code80073701
Windows 7 Service pack1 for x64 based systems (KB976932) failed. Error Code 80073701
ok so I have tried to locate similar problems from others but nothing matches. I have tried so many times to resolve the problem without success so please help me.
Barzea
This is known issue and it is described here
http://support.microsoft.com/kb/2700530
HTH
Milos
Similar Messages
-
Re:update windows 7 Service Pack 1 for x64 based system (KB976932)
Hi, I tried to updte automatically and mannually : windows 7 Service Pack 1 (KB976932) for windows 7 x64 based system. However error 404, happened, no solution suggested I can find online. Could someone can help me?
Hi,
From your error message, error 404 generally means whenever someone asks for a page that’s simply not
available on your site. The reason for this is that there may be a link on your site that was wrong or the page
might have been recently removed from the site. As there is no web page to display, the web server sends a
page that simply says "404 Page not found".
Did you get this error when you download or install process?
Please disable your firewall and antivirus temporarily and then download the package from the following address:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-us/download/details.aspx?id=5842
Note: make sure choose the proper version (x64) for your system.
After that, run this "Fix it" tool below and install the update again:
Fix the problem with Microsoft Windows Update that is not working
http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Karen Hu
TechNet Community Support -
Windows 7 Service Pack 1 for x64-based Systems (KB976932)
After failed attempts to install Windows 7 Service Pack 1, I ran this HotFix
Hotfix for Windows (KB947821)
Installation date: 2/18/2014 1:41 PM
Installation status: Successful
Update type: Important
Fix for KB947821
More information:
http://support.microsoft.com/?kbid=947821
Help and Support:
http://support.microsoft.com
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support -
Oracle in Windows Server 2008 R2 Itanium Based System IA64
Hi, I tried to install Oracle in Windows Server 2008 R2 for Itanium Based-System (IA64) with no luck, I tried with Oracle 10g version for Itanium but it shows a DOS screen and then it closes, then i wondering if anyone knows if is possible to install any version of Oracle (10g or 11g) in this version of Windows?, and in case Oracle wouldn´t support Windows Server 2008 R2 for Itanium do you think it will be possible install it on Windows Server 2008 SP2? I can downgrade to Windows 2008 SP2 but i don´t want to take the risk if this will no help me to install Oracle in my server.
Thanks in advance.user9021234 wrote:
Hi, I tried to install Oracle in Windows Server 2008 R2 for Itanium Based-System (IA64) with no luck, I tried with Oracle 10g version for Itanium but it shows a DOS screen and then it closes, then i wondering if anyone knows if is possible to install any version of Oracle (10g or 11g) in this version of Windows?, and in case Oracle wouldn´t support Windows Server 2008 R2 for Itanium do you think it will be possible install it on Windows Server 2008 SP2? I can downgrade to Windows 2008 SP2 but i don´t want to take the risk if this will no help me to install Oracle in my server.
Thanks in advance.I think it is possible to install 10G/11G on windows 2008 .
There are various BUGs on this.
Please check :
Abnormal Program Termination When Trying To Install Oracle 10gR2 On MS Windows 2008 64 Bit [ID 783296.1]
Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008? [ID 740926.1]
Oracle Database Server and Networking Patches for Microsoft Platforms [ID 161549.1]
Oracle Database Server support Matrix for Windows XP / 2003 64-Bit (x64) [ID 343737.1]
Regards
Rajesh
Edited by: Rajesh Lathwal on May 20, 2010 9:33 AM -
Webservice based system test fails
Hello,
I have created a web service based system under portal content by using template. I have provided WSDL link and using Logon Method UIDPW. Additionally, I have also set the User Mapping. But still it fails the system test.
I want to avail the Webservice from an external ABAP system in the BPM application which runs in UWL-Portal.
Help?
Regards,
Naeemi have solved the issue.
-
I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSPIt is searching for the page, but that page is not available. Did u install the current language pack?
-
Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)
My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support -
Windows 8.1 - Windows Couldn't connect to the System Event Notification Service service
I have an issue that has been bothering me for a while on new 8.1 computers. Standard users are not able to log into the computer on the first try consistently. They receive the error message: Group Policy client service failed the sign-in access is
denied. They are stuck at the logon screen.
If an administrator logs in (local or domain), they can log in but get a black desktop with two error messages. The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable. The second error message is a popup
balloon. It states "Failed to Connect to a Windows service. Windows couldn't connect to the System Event Notification Service service."
When a standard user attempts to log in, event viewer records three warnings. They are listed in order from oldest to newest
The winlogon notification subscriber <Profiles> was unavailable to handle a critical notification event. -Logged 9:14:44
The winlogon notification subscriber <GPClient> failed a critical notification event. - Logged 9:14:44
The winlogon notification subscriber <Profiles> was unavailable to handle a notification event. - Logged 9:14:49
After a reboot, users still have the issue. I noticed that the user profile services and system event notification service are not running though their startup type is automatic. They start after a minute or two.Hi Joseph__Moody,
Based on your description ,I assume it is a domain environment .First of all ,I would suggest you to try to update all the machine .
"I have an issue that has been bothering me for a while on new 8.1 computers"
Do you mean all the Windows 8.1 machine share the same symptom or just a specific one ?Did the machine work correctly before ?When did the issue start to occur ?Have you installed any third party software before ?Can we operate the machine when we login with
an administrator account ?
If the issue occurred with the specific machine :
"The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable."
Please try the following suggestions if we can operate the machine when we login with the administrator account :
Open Windows Explorer and navigate to: C:\Windows\system32\config\systemprofile and verify if it has the Desktop folder there.If the folder doesn`t exit, we can copy from C:\users\Default\Desktop location(This folder is hidden by default).
We also can try the following suggestions to have a troubleshoot :
1.Run "sfc /scannow"or "dism /online /cleanup-image /restorehealth" to check the health of the system files.
2.Perform a full scan with an antivirus software.
3."They start after a minute or two."
I suspect there is a third party service confilct here. Please perform a clean boot to verify whether there is a third party conflict here .
How to perform a clean boot in Windows
https://support.microsoft.com/en-us/kb/929135
If the issue occurred with multiple machines in the domian ,I would suggest you to check whether you have configured any logon scripts and logon group policy .We can remove the machine from the domain to have a troubleshoot .
If the issue occurred recently ,we can perform a system restore to recover the machine to a previous normal point.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]. -
How to create restore point in windows server 2008 service pack1
hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?BhaskarAFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights. -
I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete -
WebLogic as Windows 2000 service over s shared file system
I am trying to install weblogic as a Windows 2000 service over a
shared file system with no sucess
(the shared fie system is provided by windows 2000 cluster services).
I am using the srvany utility to have the script that launches
weblogic be run as a service (I need this
because I must launch 2 instances of weblogic in the same machine
as services, i cannot do this
with the bea service tools, having different configurations for
the classpath, or can I?)
The service works if weblogic is not installed in a shared file
system.
On the shared file system, it fails (The service fails, is unabble
to start). I also made a script on the local file
system, that calls the weblogic script on the shared file system,
but weblogic fails to start (with no
message) when loading from the weblogic.classpath
thanks for your attenction,
Bruno Antunes
WhatEverSoft - Java CenterI have also tried running the service with the bea tools, with no
sucess when running in
the shared file system.
When i start the service, it seems to start ok, then stops. with
no message.
Nothing is written to the log, any ideas?
Bruno Antunes
WhatEverSoft - Java Center -
CAN'T INSTALL ANY DRIVERS ON windows 10 pro x86 based system MODEL NO. HP G245 G3 NOTEBOOK
I have Installed windows 10 pro x86 based system on my G245 G3 notepad I can't find any drivers from HP website .
I have tryed win 8.1 pro 64 bit drivers but they are not working with win 10 pro 32 bit operating system.
please help me in this regard.
Thanks & Regards
I appreciate hp and its supports
Md Rayees Ahmad
consumer
This question was solved.
View Solution.Hi,
Nearly all hardware vendors won't release drivers for Windows 10 until Windows 10 is officially released (not preview). Windows 10 should install drivers for your machine after few updates. Windows 10 can find all drivers (except one: finger print) for my 5 years old machine. It should be able to find drivers for newer machines).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Unable to install Update Windows 7 x64-based system KB2952664
Unable to install Update Windows 7 x64-based system KB2952664, Error code 80073701. Internet Explorer 11 for Windows 7(although IE 11 is already installed) fails to install also(at the same time)
Hi,
Please try to do download oracle database 11.2.0.3.0 64 bit
Oracle Database 11.2.0.3.0 is certified on Microsoft Windows x64 (64-bit) 7
Thanks,
Rajasekhar -
When I send my ical link to my better half , who sadly, still uses a windows based system- He cannot open the link back to my calendar- any help?
I've been using iCloud since it's inception as "mac.com" or whatever it was called. I've been able to Sync Outlook Exchange Calenars to my iMac, iPhone and iPad. However, I cannot get iCal (when viewed in iCloud) to display Exchange or Google Calender items.
It's odd, all other Mac versions of iCal are happy e.g. iMac, MacBook Air, iPad Air, iPhone etc. But nothing when I login to icloud.com and look at the iCal there.
Maybe you are looking for
-
My Ipod touch is set to manually manage music. I have put music from my computer and iTunes account onto it, and music from other people's computer and iTunes accounts on it. Unfortunately I dropped my iPod and the screen cracked. It still plays musi
-
Integration oracle reports with ADF
Hi All, I am getting error- REP-110: File spare_request.rdf cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File spare_request.rdf cannot be opened As per Sameh Nassar: Call Oracle Reports From Your ADF App
-
Employee salary details report
dear abaper , please send a HR report in which employee salary details are given. Thank you sir. Moderator Message: Warned many times. UserID sent for deletion. Edited by: ki
-
Global Properties versus file under WEB
I have a situation where I am using a central MII server to use virtual xacute queries to retrieve data from a number of remote plants. For some reason, the client does not want to use Global properties to set Remote site specific properties. In or
-
I'm probably posting this in the wrong category but I don't see any other category that best fits. I have a question about providing my Proof of Purchase to Apple for registration purpose of my iPod Touch. On the actual receipt states it was sold to