Windows 7 - Some applications cannot install

Having an issue installing some applications on Win 7, specifically the Download Manager used by Direct2Drive. Installation gets as far as the prompt that asks if this program can make changes to this computer, but then dies.
Message was edited by: calstars

You could try right clicking on the installer, select the compatibility tab, and set compatibility mode to Vista or XP SP2. If not, see if you can get an update from the publisher.

Similar Messages

  • At UC platform i can see some applications are installed on Windows server and some directly to VMWare. Pls explain?

    At UC platform i can see some applications are installed on Windows server and some directly to VMWare. Pls explain?

    Pretty much all newer versions of UC applications have started supporting virtualization so they can be installed on the VMware. 
    Have a look at dockwiki for virtualization supported apps:
    http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Supported_Applications
    Some applications like CUCM version 4 were windows based previously but going ahead with version 5, 6 onwards the OS has been changed to Linux Operating system.
    Let me know if you need any more information.
    -Terry

  • OSD: Some application cannot be installed

    Some application cannot be installed during OSD, but all the application had passed the testing in software center
    Checked the AppDiscovery.log found that as below, what problem is it?
    Thanks
    Installed Application:
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063" AND Revision = 7)" AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    Performing detection of app deployment type DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, revision 7) for system. AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, Revision: 7] AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    +++ Did not detect app deployment type DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, revision 7) for system. AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb" AND Revision = 7)" AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    Performing detection of app deployment type ABB China Preinstalled App - DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, revision 7) for system. AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, Revision: 7] AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    +++ Did not detect app deployment type ABB China Preinstalled App - DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, revision 7) for system. AppDiscovery 2015/4/22 12:18:33 3032 (0x0BD8)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063" AND Revision = 7)" AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    Performing detection of app deployment type DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, revision 7) for system. AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, Revision: 7] AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    +++ Did not detect app deployment type DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_2c31e016-7709-40fa-b106-a66833410063, revision 7) for system. AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb" AND Revision = 7)" AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    Performing detection of app deployment type ABB China Preinstalled App - DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, revision 7) for system. AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, Revision: 7] AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    +++ Did not detect app deployment type ABB China Preinstalled App - DWG TrueView 2015(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb, revision 7) for system. AppDiscovery 2015/4/22 12:18:34 3828 (0x0EF4)
    ActionType - Install will use Content Id: Content_decfcf79-967d-4d5e-bfd1-cfe0d1ed6b11 + Content Version: 1 for AppDT "ABB China Preinstalled App - DWG TrueView 2015" [ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb], Revision - 7 AppDiscovery 2015/4/22 12:18:35 3828 (0x0EF4)
    ActionType - Install will use Content Id: Content_decfcf79-967d-4d5e-bfd1-cfe0d1ed6b11 + Content Version: 1 for AppDT "ABB China Preinstalled App - DWG TrueView 2015" [ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_94306758-88d3-42a1-8f84-b39271e8a0bb], Revision - 7 AppDiscovery 2015/4/22 12:18:35 3828 (0x0EF4)
    Not installed
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34" AND Revision = 4)" AppDiscovery 2015/4/22 12:18:24 3032 (0x0BD8)
    Performing detection of app deployment type SAP 730 Full Install & Uninstall(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, revision 4) for system. AppDiscovery 2015/4/22 12:18:24 3032 (0x0BD8)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, Revision: 4] AppDiscovery 2015/4/22 12:18:24 3032 (0x0BD8)
    +++ Did not detect app deployment type SAP 730 Full Install & Uninstall(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, revision 4) for system. AppDiscovery 2015/4/22 12:18:24 3032 (0x0BD8)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34" AND Revision = 4)" AppDiscovery 2015/4/22 12:18:25 3032 (0x0BD8)
    Performing detection of app deployment type SAP 730 Full Install & Uninstall(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, revision 4) for system. AppDiscovery 2015/4/22 12:18:25 3032 (0x0BD8)
    +++ Application not discovered. [AppDT Id: ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, Revision: 4] AppDiscovery 2015/4/22 12:18:25 3032 (0x0BD8)
    +++ Did not detect app deployment type SAP 730 Full Install & Uninstall(ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34, revision 4) for system. AppDiscovery 2015/4/22 12:18:25 3032 (0x0BD8)
    ActionType - Install will use Content Id: Content_c6a0d4fe-3acc-46b2-b341-77face686445 + Content Version: 1 for AppDT "SAP 730 Full Install & Uninstall" [ScopeId_1DEE09E2-D5CB-402F-B136-6B23B05DCD37/DeploymentType_a3c1d42a-2a23-438a-ab17-d0d73cd9ad34], Revision - 4 AppDiscovery 2015/4/22 12:18:25 3032 (0x0BD8)

    Look at the AppIntentEval.log - "Records
    details about the current and intended state of applications, their applicability, whether requirements were met, deployment types, and dependencies."

  • Windows XP/64bit cannot install MPA drivers for C5

    I'm successfully using Nokia OVI Suite for my C5 on windows XP / 64 bit.
    But The OS cannot install the MPA drivers for accessing the device directly in Windows Explorer. Every time I connect the mobile using "mass storage" or "data transfer" mode (don't know the correct names - I'm using the german interface), the OS tries to install the drivers and finishs the "New Hardware"-dialog with the following message:
    There was a problem installing the hardware: C5-00
    An error occured during the installation of the device.
    The class installer has denied the request to install or upgrade this device.
    Please help!
    Kind regards,
    Doris C.

    hi dunchilla,
    Could you please try this once?
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and select pcsuite mode
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Ovi Store and some app cannot install on Nokia C6-...

    I buyed my phone 2 days before and updated my phone's firmware to PR 1.1 . I don't really know it happened because new firmware  because i updated at first and didn't do anything on old one. I couldn't install Ovi Store and some applications on my phone ( C6-01) . I re-flashed  it but i couldn't install them again. It says "documentary corrupted."  What do you think about this case ?  What can i do before taking it to Nokia Care Center ?
    Nokia 8110, Nokia 5110 ,Nokia 3210
    Nokia 6021, Nokia 6610, Nokia 6600,
    Nokia 6300, Nokia 5800 and Nokia C6-01
    Solved!
    Go to Solution.

    İs there anybody?
    Nokia 8110, Nokia 5110 ,Nokia 3210
    Nokia 6021, Nokia 6610, Nokia 6600,
    Nokia 6300, Nokia 5800 and Nokia C6-01

  • Windows 7 Upgrade: Cannot install Rescue and Recovery 4.3

    I recently upgraded my T500 from Vista to Windows 7.
    I have downloaded the following Lenovo software: Lenovo Thinkvantage Software Toolbox and Lenovo System Update 4.
    I would also like to install Rescue and Recovery 4.3.  I downloaded the program from Lenovo's site, but I cannot get it to install properly.  I keep getting an error indicating that Microsoft Visual C++ 2005 Redistributable Package (x64) SP1 must be installed.  I downloaded this from Microsoft's site and installed it, but I keep getting the same error.
    And help???

    Hi guys I have the same problem, however after installing the 2005 version of the package from the link provided by lenovo here (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4Q2QAK&AID=10429688&PID=3719336&...
    I went to the control panel and checked what version of this package is installed. The case was that there were 3 versions of Visual C++ 2005 redistributable already installed.  This is a fresh installation of Win7 - 64bit
    I removed all of them and reinstalled the one suggested by lenovo.
    The problem still continues.
    I also noticed the following article from about the same time the package was released in 2006 http://support.microsoft.com/kb/920854
    Could it be that the RnR tool can not detect the redistributable package?
    So far I have no idea how to solve this. Any help is appreciated.

  • WLAN module is sleeping from Windows Dual boot cannot Install

    Hi I'm having problems installing from the Core installation disk due to Windows 7 or the Windows 7 Wifi driver for my computer shutting off the Wifi module when it restarts or powers off. I was wondering if anybody had any idea about that if so. How do I wake WLAN in Linux Dual-boot so I can have wireless internet access in Linux. I run an ASUS Laptop. My wifi driver is a Ralink 80211n Network adapter.

    This is possibly due to windows having trouble to establish a wireless connection, then it shuts down the wireless card to save power.
    Unfortunately on some systems, bios/efi doesn't re-enable the card at next boot.
    I've encountered cases where the card stayed disabled, and the only way to get it back was use the network troubleshooter to get it activated gain.
    That trick however only worked until windows lost wireless connection for whatever reason.
    The only way to solve this permanently if found is to deny windows the option to shut down the wireless card at all.
    To make this work however you need to change the wireless adapter settings :
    In windows configuration panel, look for 'device management'.
    In the tree, select the physical wireless adapter, choose properties .
    you should see 4 tabs then, one of them (think it's called driver details) allows you to set many driver settings.
    Look for an option called something like : "windows is allowed to shut down this device to save power" and disable it.
    Edit : tried to make it more readable
    Last edited by Lone_Wolf (2013-09-01 12:57:29)

  • Windows Vista--again- Cannot install Creative Media Sou

    Hello. I have a Zen Microphoto. I bought a new computer running window vista home premium 32 bit. I have been tryng to install the creative media source 5 to manange my music and playlists. I prefer this over Media Player. Every time I try to install the program, the setup program stalls with an error message, "searching for installed components" I have tried installing the program with the ZEN plugged into different USB ports and I have tried deleting the driver from the device manager and reinstalling it. Can anyone help me with this??

    I would work through the reset procedures given under the various FAQ threads and then try the firmware upgrade again after getting it out of recovery mode as that seems to be the issue. There seem to be a number of threads with things to try. I would not give up but first work through the various suggestions to get it out of recovery mode. Then post separately re the recovery mode problem to see if anyone has ideas for solving that first. Did it go into recovery mode immediately after the firmware upgrade? Will it let you try to do the firmware again?When I connect it takes about 20 secs before the player is recognized by media player. In terms of transfer to your own laptop - do you have a burner on the friends PC for burning a DVD or 2. Or a slower way is multiple transfers using a USB memory stick.

  • Some applications are installed from internet in chinese or japanese

    such applications as Dropbox and teamveiwer. How to solve it?

    Where are you getting them from?  I suggest you go either directly to the author's site (for example for Dropbox it's https://www.dropbox.com/, or teamviewer from http://www.teamviewer.com/en/download/index.aspx) or a site for software that can be trusted like macupdate.com.
    Of course there's also the possibility you have some malware (trojan) redirecting you to those Chinese and Japanese sites.  Do you have Java turned off?  Do you have all the latest apple security updates?

  • Bus error on some applications after installing 2013-002 update

    Hi,
    After installing 2013-002 Security Update on Mac Os 10.6.8 I get Bus Error when starting chrome (last version), trying to select a disc image in VirtualBox 4.2.12 and possibly in other applications.
    Any known bug that I'm not aware of? Reseting PRAM didn't work.
    Thanks.

    Tried to fix permission with Disk Utility but it didn't work.
    Here is the beggining of my crash reports:
    Process:    
    Google Chrome [248]
    Path:       
    /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
    Identifier: 
    com.google.Chrome
    Version:    
    27.0.1453.110 (1453.110)
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [211]
    Date/Time:  
    2013-06-05 17:58:25.353 -0300
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:     
    13318 sec
    Crashes Since Last Report:      
    25
    Per-App Interval Since Last Report:  40 sec
    Per-App Crashes Since Last Report:   11
    Anonymous UUID:                 
    9839EF92-04E8-4A96-A582-68E940C20B35
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000a
    Crashed Thread:  0  CrBrowserMain  Dispatch queue: com.apple.main-thread

  • Help! Windows Installer Package cannot install!

    When I download the latest iTunes software, it does not fully install. Apple Application Support, Bonjour, and Apple Mobile Support are the only softwares my PC installs. I have no idea where QuickTime and iTunes are. There is also no updater. I have looked around forums and discussions everywhere but nothing has worked.

    Do you get an error message when you try to do the install? If so, what does it say? (Precise text, please.)

  • I am trying to format my macbook pro hard drive and every time I get a window that says "Cannot instal Mac OSX on this Hard Drive." What do I do?

    The only options it gives me is to restart or restore from back up which isn't what I want to do... HELP?!

    Provide information relative to the issue like which MBP model, what OS is running on it, what OS are you trying to install on it and where did you get the OS installer disk from then perhaps someone could help.

  • Cannot install applications, cannot install applications

    I have ipod touch which is working fine { Model MB533ZP version 4.2.1 (8C148) } I am unable to install Temple Run and Skype now . Can you please help. This apps were working earlier but not anymore.

    Temple Run now requires iOS 4.3 or hgher and Skype requires iOS 5 or higher. You 2G iPod can only go to 4.2.1
    Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.

  • Unisphere Host Agent cannot install on Windows 2012 R2 Core

    Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server. 
    When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013 updates to Windows 8 and Windows server 2012.

    Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server. 
    When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013
    updates to Windows 8 and Windows server 2012.

  • How to install Windows-only applications on Macs?

    Is there a way to do this without having to purchase huge software programs (like Parallels, etc.)? I am only wanting to run 1 Windows-only application, not install the entire Windows-theme onto my laptop. Thanks for the help!

    Bootcamp is free.  Windows is not.
    Mac Basics: Using Windows on your Mac via Boot Camp
    http://support.apple.com/kb/ht1461

Maybe you are looking for