Windows 7 soundcard Driver?

hi, i have just put win 7 on my media live, and i only get hdmi audio. i cant get 5.1 sound from the coax digital output only 2 channel sound?
i contacted microsoft and they said i dont have the correct sound driver installed,
the one i downloaded was...
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false
which says its the hd audio for vista and win 7?
could someone point me in the right direction so i can get my 5.1 sound back. in control panel i only have the hdmi sound source visible and not the speaker one?

Hello
I have similar problem; I am using media live diva with 5+1 card with win7 ult 64bit.
I could not install msi website driver, windows refused it.
I installed a driver from realtek site but has not work.
I can see under sound devices "Digital audio (hdmi)" , "Speakers, D2 Audio HD Audio Device" , "Speakers, Realtek High Definition Audio" , "Realtek Digital Output, Realtek High Definition Audio".
I tried the test option for all "Digital audio (hdmi)" WORKING PROPERLY, "Speakers, D2 Audio HD Audio Device" WORKING ONLY STEREO NOT 5.1, "Speakers, Realtek High Definition Audio" NO SOUND, "Realtek Digital Output, Realtek High Definition Audio" NO SOUND.
Could someone please help me how can I activate 5.1 ?
Where can I find the correct driver or is this a driver problem ?

Similar Messages

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help - Dell 8300 Dimension Soundcard driver

+\ok, i have?this old Pc Dell 8300 Dimension. I recently upgraded my os to 32bits-win7 and it's working great except i have no sound. I went to dell driver site to download the creative lab - sound blaster driver but? it was only for xp. I tried with that xp driver but it didn't work. Any suggestions?! Any help will be appreciated! Thanks!

/Re: Help - Dell 8300 Dimension Soundcard driver<Well there is no for the Li've! in Vista and of course windows 7, but I have one that works in Vista and has to be worth a try in Win7 as the sound card drivers are very similar.
Have a look [url="http://www.filefront.com/0960626/SBL_VTDRV_LB_2_0_000A.exe/">here[/url].
SB Li've! series Vista Support Pack Created by daniel_k
This pack Supports all Li've! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
- Li've! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum
- Li've! 5. MP3+ / X-Gamer / Digital / Platinum
Does NOT support the following OEM / Retail models:
- Host / software-based cards including Li've! 24-bit
- any external Li've! soundcards
NOTE: May have issues with more than 2 gigs of ram in Vista

Soundcard driver does not support DirectSound ?

Hi,
I just had to reinstall my OS, (Vista) Then I reinstalled AE CS3, now when I open AE I get a message saying that,
"The currently installed soundcard driver does not support DirectSound Input. Recording audio is not possible"
My soundcard is a 'High Definition Audio Device' made by Microsoft, it works fine and all the drivers are up to date.
Does anyone know anything about this problem or how to fix it ?
Thanks in advance.
J.

Well, what driver did it use before you re-installed? A standard MS HD Audio device doesn't mean anything. It would install that standard driver on a 10 year old computer, as it's more or less an emulation device. You will have to install the correct chipset specific driver, which probably merely requires a manual initialization of Windows Update with extended options. likewise you should be able to find out what audio device is in your system e.g. by using SiSoft Sandra to probe it...
Mylenium

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Hp ENVY m6-010dx Notebook Windows 7 Driver Package SOLVED

As many of you know, hp does not provide Windows 7 Drivers for many newer notebook models that shipped with either Windows 8 or 8.1. Some models, such as ProBook, do come with both Windows 7 and Windows 8 or 8.1 licenses and have thus hp provides drivers for both.
The hp ENVY m6-010dx ships with Windows 8.1 installed and only has listed drivers for that operating system on the hp Support Site. Many of the Windows 8.1 Drivers will work for Windows 7 - but some will not.
I have complied a Windows 7 Driver (64bit) Package for the ENVY m6-010dx (my guess is it will also work on other slightly different ENVY Models with AMD Processors such as mine).
If you have an hp ENVY m6-010dx and hate Windows 8.1 and want to downgrade to Windows 7 - here is the link to the driver package I have put together. It's a large file - well worth the download time though if you want to use Windows 7.
https://www.dropbox.com/sh/01svwkhdi9n9crf/AABqObKTkDmU3g04gMfi0ky-a?dl=0
Hope this helps others.
Greg Griffin

You're very welcome.
Try this driver for the bluetooth from a Lenovo notebook...
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029104
Try this wirless driver from asus:
You wan the windows 7 file labeled : (The first one listed)
ASUS PCE-AC66 driver 6.30.95.26
OS Support : Wins 7 (32&64)
http://www.asus.com/Networking/PCEAC66/#support_Download_30
Now you install this driver by unzipping the file you downloaded and make a note of the location of the unzipped file.
Go to the device manager and click on the network controller needing drivers.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software and browse to the folder that was unzipped.
Make sure the Include Subfolders box is checked and see if the driver installs that way.

Windows 7 driver - HP photosmart d110?

Is there a Windows 7 driver for HP Photosmart d110? (wireless)
It doesn't seem to be on the list of supported printers, but not exactly on the list of unsupported printers either.
If it's unsupported, what alternative driver will at least provide some printing capability? Right now, it only churns out garbage.
This question was solved.
View Solution.

Hi,
There is a Full Feature driver installer for your printer running Windows 7 - the download link for the installer is available on the document below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80511-1&cc=us&dlc=en&lc=en&...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 7 driver for 3500 color printer

I need a windows 7 driver for my 3500 color laserjet printer. Windows XP is the latest driver listed on the website.

The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot.
Message Edited by DexterM on 07/10/2009 10:57 AM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
Capture.JPG ‏57 KB

Windows 7 Driver for Color Laserjet 2605dn is PostScript Only -- Has Specific Issues

This network-connected printer runs fine under XP SP3 with a PCL driver downloaded from HP (5 or 6, I don't remember). New computer has 64-bit Windows 7. Now HP is telling me to use the built-in Windows 7 driver (see http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl... but all I can find is PS, no PCL. This driver works OK except on certain types of documents:
Printing a scanned document takes forever, if it prints at all.
Similarly for PDF pages that have background colors or anythign else unusual.
(I could send examples of problem pages it that would help...)
I can print these same documents easily and quickly on my XP computer with the PCL driver, so I'm assuming PS just chokes on these kinds of documents.
Is there an appropriate PCL driver for Windows 7 64-bit (or could I run a suitable 32-bit driver in my situation)?
Failing that, is there any other solution to this problem? (I can't keep a Windows XP computer around forever!) -- jclarkw

>> ... Any recommendation PCL5 vs. PCL6 with this old 2605dn? ...
As far as I can remember, the LJ 2605 printer has a very limited set of printer-resident PCL5 fonts, which means that:
Using bespoke software which directly generates print jobs (without the benefit of a driver) and which assumes that the normal set of LaserJet fonts will be available via standard font selection sequences, may result in unsuitable substitute fonts (from that limited set) being used.
The standard UPD PCL5 driver may also suffer from this problem (I don't know); even if it doesn't (i.e. it is aware of the limited font set), then use of other fonts in the source document will have to be satisfied by the driver either rastering the text (sending a bitmap image) or dynamcially generating and downloading a PCL5-encapsulated (subset) of the source (TrueType) font (which will increase the size of the print job).
As far as I'm aware, the PCL6 (PCL XL) intepreter in the printer includes the normal full set of fonts in the firmware.

Windows 7 driver for hp laserjet 1100

windows 7 driver for hp laserjet 1100

Hello Stoiko,
Thanks for the post. Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here: Good Luck!
HP LJ 1100
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
HP LJ 1100 All-in-One
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Windows 7 driver for HP 5189-1098 TV and FM tuner?

Does a Windows 7 driver exist for driver for HP 5189-1098 TV Tuner w/ FM radio?
Has anyone had any luck getting the FM tuner to work in Windows 7?
Thank you,
Chuck

Hi cybermrc. Did this tuner come with an HP computer? If so what model?
How to find your computer model:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USE...
Re. FixIt Post: It seemed to to me that he may have run it incorrectly, based on his last post, perhaps I read it wrong.
Can you verify that you have done this (its Win Vista, so let me know if Win 7 doesn't have these options)
Here under “Why can't I find the option to play FM radio?” it shows how to set it up:
http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-with-radio-stations-in-window...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Pixma ip6000d windows 7 driver issue. How do you get one?

Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.

Hello ricksterofmi,
The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update. Please connect the PIXMA iP6000D to your computer and automatically install the drivers. Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
I hope this helps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP Laserjet 276n Windows 98 driver

I am searching for a generic windows 98 driver for the laserjet 200!
We need it for printing from a car diagnostic station.
Which driver coul I use to solve my problem?
thanks in advance

Hi @epertino ,
I see by your post that you need a driver for Windows 98. I will try and help you.
I checked the printer's specifications and Windows 98 isn't a support operating system for this model.
Supported Windows operating systems: Windows XP Service Pack 2, Windows Vista, Windows 7, Windows 8.
Printer Specifications for HP LaserJet Pro 200 Color MFP M276n and M276nw.
I also checked for a Universal Print Driver and unfortunately there isn't one listed for Windows 98 either.
Sorry I couldn't be of more help.
HP Universal Print Driver for Windows.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet p1005 windows 8 driver ?

Hello,
I've been waiting for a while to come out windows 8 64bit driver for my printer HP LaserJet p1005. The windows 7 driver doesn't find my printer.
Please tell me at least how much longer will it take to come out, so I can take the appropriate measures to be able to print when it's important.

Hi pefo_1,
Maybe the next steps helps
To install on Windows 8 apply the following steps:
1. Download the driver that is available on the HP site:
  Basic Driver Plug and Play for HP LaserJet P1005
ljP1000_P1500 HB-pnp-win64-en.exe-[1/1, 3.54m]
Note: Download this file to the Windows Desktop.
2. Then select the downloaded file with the mouse right click Properties.
3. Select the tab that says Compatibility.
4. Then check the box that says "Run in compatibility mode for" and select Windows 7
5. Under Privilege Level check the box that says "Run as administrator"
6. Click OK to close the Properties window.
7. Then double-click it on the downloaded file to begin the installation.
Note: Remember that the USB cable must be unplugged before installation.
It should appear as follows:
I hope these steps will be helpful with the Windows 8 installation of the Laserjet P1005 printer.
* Click on KUDOS star to say thanks
* Click on the button Accepted Solution if the question is answered.
Cheers,
ferRX.

HP 15-f039wm Windows 7 Driver Problems REOPEN PLEASE

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-15-f039wm-Windows-7-Driver-P...
Im experiencing the same issue. A very nice person posted links to drivers to help solve the issue, but the 2nd link for the graphics card is no longer valid. Does anyon know were i can find the driver thats listed in the previous link?
Why does it affect my HP15 after downgrading to windows 7.. and is there a support page on HP.com where i can find these drivers just in case i need to format my computer again in the future?

Try the Intel driver update utility.
http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Try the following HD graphics driver
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24391&lang=eng&ProdId=3590
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 7 - Driver Availability Chart For Creative Products is nearly useless

<span class="text">[url="http://support.creative.com/kb/showarticle.aspx?sid=605">Windows 7 - Driver Availability Chart For Creative Products[/url] is outdated Windows pre-release drivers (at least for the Audigy SB0090 series) back from July. This appear to be revamped Vista drivers that are not usable for W7 RTM. MS made changes to W7 where most Vista drivers do not work properly any more.
When I try to install the drivers through the installer I get the incompatibility error and the installer quits, then I get the failed install pop-up for W7.
What I would like to know is when Creative plans on releasing drivers that work with W7 RTM? Llinking drivers that worked for W7 RC is not helping and really should be removed.
I have used Creative sound cards since just before the SB6 came out. I have been a loyal Creative customer from early on. But if Creative can not deali'ver a fully working driver suit for my sound card by the end of the month (November) I would appreciate knowing so I can start looking for another a replacement, which won't be a Creative product.
Even though my last 3 MBs have had good built-in sound, I have went out and bought Creative sound cards because I wanted the best, which Creative has previously provided.
I need to upgrade my MB so I have put of buying a new sound card until I do. But if I'm forced to buy a new sound card because Creative says it will provide drivers that work with W7 RTM and for what ever reason can not do so, I will not be buying another Creative product.
I maintain 4 PCs of my own so that will be 4 cards bought from a competitor since Creative has completely dropped the ball. All major component manufacturers have been able to release stable drivers at the same time as W7 RTM release , or within days after release. Why hasn't Creative been able to do so? Creative was able to release suitable drivers for RC in a timely fashion, what happened with W7 RTM? Did they recently fire all the programs and techs?
Please do not link useless info. Please find out what is going on and tell the powers-that-be at Creative they have some really upset customers and ask them to tell us what is happening here. Tell them we would like to know when Creative plans on releasing drivers for W7 RTM so we can make the decision to wait it out or buy replacements.

Again, yes Device Manager has no problem detecting the card and W7 has no problem loading the default Window drivers for it.
Since I had to replace my TV Tuner Card, I used Device Manager to remove it and my Audigy card and then shut the PC down. My new TV Tuner Card is a PCI-E x so I installed it in an open slot and move the Audigy to the PCI slot where the old TV Tuner Card was.
When I started my PC again, W7 detected the Audigy card and loaded the defeult drivers. I again tried to use the installer and had the same error.
The sound works, but I only have basic Windows functions/controls.
It is most definately not a hardware issue.
The online auto update detects it, just the installer does not detect it.
I am currently awaiting a response from CS now. Of course the problem there is that you have to wait/respond, wait/respond, wait/respond just to cover the same ground that has been gone over a hundrd times already.
I put every step I have done in the email. As usual, it was a waste to type because you are asked questions already answered and to preform steps already done.
It would be nice if CS would realize that some of us are only contacting CS because we have already done all the standard steps without success and now need to move onto the advanced ste
ps.

Windows 7 soundcard Driver?

Similar Messages

Maybe you are looking for