Windows 7 SP1, Error 0x80041010

Hello,
Windows Update service fails to install Service Pack 1 on my Windows 7 Professional 64-bit with an error code 0x80041010. After reading some posts on this forum I have come to conclusion that my problem is different. According to CBS.log the problem is enumerating
the class Win32_ComputerSystem. Following instructions from the forum, I have started wbemtest, successfully connected to the service and tried enumerating the class manually. It fails with the following error message:
Error. Number: 0x80041010. Facility: WMI. Description: Invalid class.
I have not seen anyone reporting this yet on this forum. Typically users have their WMI service not running at all. Also winmgmt /verifyrepository reports that WMI repository is consistent. Is there a way I can fix the problem without re-installing Windows?
Please tell me what steps should I take. Thank you.

Hi,
You may refer to the following similar thread.
http://social.technet.microsoft.com/Forums/en/ITCG/thread/d0e40221-bf73-4f31-a2fd-59966bf7e5df
If the issue persists, I suggest to make an In-place upgrade. This will reserve your data and applications.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

GUI7.20 expert model for windows 7 error

In GUI 7.10, we active the function for show keys within dropdown lists in the expert model tab when change the gui option, when we enter the key word 'M' in the industry setor field to create new material (MM01), the entire content will be filled automated as "M Mechanical engineer".
but now we setup GUI7.20, and active the function for show keys within the dropdown lists in the controls tab, when we enter the key word 'M' in the same field to create new material, the entrire content is not be filled atomated.
i ran to trouble to use this expert function, could you help me to point the reason?
change some more control fields in the GUI option or change the regedit parameter about GUI?
thank you in advance!

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
Please indicate if the system recovery ran and completed or you were unable to even initiate the recovery. depending on the exact issue, you may be able to repair the "bootmgr missing" error using a Windows 7 installation DVD. If you need a Windows SP1 disc, please see "How to Install Windows 7 Without the Disc" to download and create your own. If you have created this disc, you can boot from it and select "Repair" to attempt to fix the current issue.
Select Repair Your Computer. After several screens you will arrive at choices. Select Command Prompt. Type bootrec /RebuildBcd. Next type Exit
Select 'Startup Repair' and allow it to run. Restart the laptop.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27   18:38:25:627   868   ba4   AU   ## START ## AU: Search for updates
2013-03-27   18:38:25:627   868   ba4   AU   #########
2013-03-27   18:38:25:627   868   ba4   AU   <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:25:627   868   934   Agent   *************
2013-03-27   18:38:25:627   868   934   Agent   ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:25:627   868   934   Agent   *********
2013-03-27   18:38:25:627   868   934   Agent      * Online = Yes; Ignore download priority = No
2013-03-27   18:38:25:627   868   934   Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27   18:38:25:627   868   934   Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27   18:38:25:627   868   934   Agent      * Search Scope = {Machine & All Users}
2013-03-27   18:38:25:627   868   934   Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27   18:38:25:627   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27   18:38:25:627   868   934   EP   Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27   18:38:25:627   868   934   Setup   Checking for agent SelfUpdate
2013-03-27   18:38:25:627   868   934   Setup   Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27   18:38:25:799   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27   18:38:25:799   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:25:815   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:25:815   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:26:002   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Setup   Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27   18:38:26:002   868   934   Setup   SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27   18:38:26:440   868   934   PT   +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27   18:38:26:440   868   934   PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27   18:38:28:846   868   934   WS   WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27   18:38:28:846   868   934   WS   WARNING: Original error code: 0x80072efe
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error receiving the HTTP reply.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the remote endpoint was terminated.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the server was terminated abnormally
2013-03-27   18:38:28:846   868   934   WS   WARNING: Web service call failed with hr = 80240440.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Current service auth scheme='None'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27   18:38:28:846   868   934   WS   FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: PTError: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: Sync of Updates: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27   18:38:28:846   868   934   Agent      * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent      * WARNING: Exit code = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent   *********
2013-03-27   18:38:28:862   868   934   Agent   ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:28:862   868   934   Agent   *************
2013-03-27   18:38:28:862   868   934   Agent   WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27   18:38:28:862   868   598   AU   >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Search callback failed, result = 0x80240440
2013-03-27   18:38:28:862   868   598   AU   #########
2013-03-27   18:38:28:862   868   598   AU   ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU   #############
2013-03-27   18:38:28:862   868   598   AU   All AU searches complete.
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Failed to find updates with error code 80240440
2013-03-27   18:38:28:862   868   598   AU   AU setting next detection timeout to 2013-03-27 12:38:28
Ricky

some more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky

Event ID 10 with error 0x80041010

Hello,
getting the following event 10 as well as a handful of others differing only in the specific wmi class referenced in the query. Appears to only be logged once at boot.
Log Name: Application
Source: Microsoft-Windows-WMI
Event ID: 10
Description:
Event filter with query "select * from HP_PowerSupplyEvent" could not be reactivated in namespace "//./ROOT/WMI" because of error 0x80041010. Events cannot be delivered through this filter until the problem is corrected.
This is an HP server and I know it's related to the HP WBEM provider. I'm using the latest version of the HP WBEM provider, and have also tried the previous version. Same results.
From what I've found googling the 0x8001010 error indicates an 'invalid class', however using powershell I can retrieve a reference to this class without error, and they show in the list when querying that namespace, for example:
PS C:\> gwmi -Namespace root\wmi -list | Select-String hp_
\\DFEWWW-R5CM5N\ROOT\wmi:HP_FanEvent
\\DFEWWW-R5CM5N\ROOT\wmi:HP_UIDStateChangeEvent
\\DFEWWW-R5CM5N\ROOT\wmi:HP_TempSensorFailureEvent
\\DFEWWW-R5CM5N\ROOT\wmi:HP_PowerSupplyEvent
\\DFEWWW-R5CM5N\ROOT\wmi:HP_ASRStateChangeEvent
\\DFEWWW-R5CM5N\ROOT\wmi:HP_Health
all the classes listed in output of above PS command have an event id 10 error in the application log, just like the example I put at the beginning of this post.
aside from "check with HP", does anyone have any idea how to resolve this? recompiling the mof's?

I have the same problem on Windows 2008 R2 server and the WMI Diagnosis Utility doesn't work.
May the source be with you!
Please Mark As Answer if my post solves your problem or
Vote As Helpful if a post has been helpful for you.
yes, same thing happened with Windows Server 2008R2 and HP WBEM monitoring agent.
What's the solution here ?
/* Server Support Specialist */

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

How do I correct a Windows Vista error for HP Officejet 6500 E709n wireless?

I continue to get a Windows Vista error when trying to install the printer software ...now it does print, but only the bottom half of a page..???

Dave, I would recommend completely uninstalling the printer from Programs and Features (after unplugging the USB cord if you are using one), and removing the printer from both Device Manager and Devices and Printer.
We are going to reinstall the printer from one of the downloads that HP makes available, but first I will have to know if your printer is the 6500A or the 6500. Also is your Win Vista machine running 64bit software or 32bit software?
If you can give me a complete product name and the information on your system, I will link you to the appropriate download.
Let me know!

My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

tools is at the top of the apple updater but dont get your hopes up

Cannot delete file - tried everything - file in use by Windows Explorer error

Hi - I have tried now for 2-3 hours trying to delete an .mkv file from my "Downloads" folder
It says the file is in use by Windows Explorer and cannot be deleted
I have tried deleting it using Del command prompt as me and as Administrator (I am the Admnistrator, there are no other users) - no luck
I have tried Safe Boot and then deleting - no luck
I have tried rebooting many times and then deleting - no luck
Any ideas? It's driving me nuts

hi to all who have this bug- "file in use by Windows Explorer error"
this is the only way that it works:
1.type cmd in search box
2.go to the drive and the directory the file is in ,for example:
after you type cmd you have a black screen with c:\user\
type in the drive the file is in and hit enter example - d: than hit enter
than you should see d:\>
now click the directory the problem file is in ,for example i will call the directory "movies" type in this- cd movies
now you will see this d:\movies>
to delete the file type this: del filename.mkv (dont forget the .mkv or any other file extension) don't hit enter yet, first open task manager (cntrl+shift+esc) go to process tab than right click on explorer.exe choose and click on end process
now your desktop should disappear. get back to the "cmd" window and hit enter.
now the file is deleted. now go back to the task manager and click on "file" on the upper left corner then on new task then type in "explorer.exe"
and you are done
please note that the file name you choose to delete cant be with spaces between the letters .if so you will need to change it in the same way in the cmd window only the comand will be instead of "del filename.mkv"(for example) after you are in the
right drive and directory:
rename "test space.mkv" testspace.mkv
hope i helped
this is the only way it workes
Instead of running a CMD prompt and typing everything, just start up Winrar or Winzip, kill Explorer, then delete problem MKV files to your hearts content within Winrar or Winzip.
Winrar and Winzip will navigate your folders as well.
After you are done, create a new Explorer task.
or..... if you need to rename MKV files, just rename them within Winrar/Winzip with Explorer not running.
I change the MKV extension to AVI (in Winrar with Explorer killed) in order to avoid Explorer issues, if I ever want to move the files in the future without needing to kill Explorer all the time to do so .
Using WinRAR works for me. Using the cmd function becomes complicated when I cannot rename my file with the rename command".

Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

Hi I wondered if you could help me.
Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
I'm also running
McAfee Internet Security 7
Spybot
Ad-aware
Spywareguard
A-squared
Spywareblaster
Ive also tried running defrag and scandisk to no avail.
Thanks.

Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.

Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Can't get the latest itunes update to download on my windows7 laptop. It gives runtime error window then error 7, windows error 114, any ideas

First thing to say is I'm new at trying to slove my own computer issues, so I may be a little slow. The latest iTunes update will not install on my Windows 7 labtop, I keep getting a runtime error window with Error 7 and Windows eror 1114. I have run a fix and reload the file with no resuts and can't seem to get it do download manually either, any ideas for this computer challanged person?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

WINDOWS UPDATE ERROR, SERVICE ERROR, ETC. PLEASE HELP!!

Problems Found:
Some security settings are missing or have been changed.
Service registration is missing or corrupt
Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
Problems installing recent updates
I have literally tried everything I can and its just getting even more upsetting :(
Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors.
PLEASE HELP!

Problems Found:
Some security settings are missing or have been changed.
Service registration is missing or corrupt
Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
Problems installing recent updates
I have literally tried everything I can and its just getting even more upsetting :(
Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors.
PLEASE HELP!

Windows update error code 8e5e0147 help!

I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

Please review this previous post:
Cannot install some Windows updates, error code 8e5e0147
Carey Frisch

Windows 7 SP1, Error 0x80041010

Similar Messages

Maybe you are looking for