WIndows 7 SP1 "incompatible" with Boot Camp?

Today I booted Windows in Parallels and was told that SP1 was available for installation. After I installed it and rebooted, Parallels told me:
"The Windows version is not supported by Boot Camp.
The virtual machine is booting from a Boot Camp partition. The version of Windows installed in the virtual machine is not officially supported by Boot Camp. If you continue, you may encounter problems with Microsoft Windows or Office activation."
Windows 7 SP1 is not supported by Boot Camp? Is this true, or is Parallels making stuff up? How would a program written before SP1 even existed determine this to be the case, anyway? And if it is true, what do we do about it?

It also would be helpful to specify Win7 32 or 64 bit. Apparently the 64 bit version of SP1 was released a bit later--I think Mar 15. I hadn't installed it yet. But then severe problems starting in Mid Feb that rapidly escalated. Archive & install done & helped, but still problems, finally led to erase & install. & then the restore didn't go right so heading to Genius bar for more help.
Not sure what happened but reinstall of Win7 today doesn't look like the original.
1 additional thing about the Windows updates that I noticed about a week ago running in Parallels 5. Windows was set to update automatically & I didn't realize it was updating when I told Apple to go ahead with updates. I then changed windows update setting to prompt me so they wouldn't both be running at same time.
So when I get the other things up & running ok, I want to know about whether to install SP1

Similar Messages

  • Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

    Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
    NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
    I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
    I've tried a Windows DVD install disk  plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
    I have tried both wireless and USB keyboards and mouse. Same failure.
    I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
    NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
    Has anyone had the same problem?
    Has anyone succeeded? If so, any special actions or ideas?

    The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
    <quote>
    If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
    sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
    Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
    You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
    </quote>

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • Installing Windows On Multiple Macs With Boot Camp?

    I have an iMac, White MacBook, MacBook Pro (Late 2006) and very soon I should be getting a Unibody MacBook Pro. My question is, I plan on buying Windows 7 for Boot Camp, and I was wondering if the install limit applies even with Boot Camp. I read that Windows only installs on one computer at a time, and I was curious that if with Boot Camp, it still holds true. Any help would be appreciated.

    For now, Windows 7 is free RC download. And there are hints in the EULA that a Family Pack could be in the offering.
    I usually buy System Builder, and you can buy Vista SP1 with $9.95 or free upgrade to 7 - retail, Ultimate to Ultimate.

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • MANY issues after installing Windows XP Home Edition with Boot Camp

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
    ~Twilight

    Twilight:
    Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
    Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
    Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
    Axel F.

  • Installing windows 7 on Mavericks with Boot Camp

    Hey,
    I'm having difficulties installing windows 7 on my 2008 mac pro. I'm running Mavericks. I'm trying to install windows 7 onto a extra internal SSD with the installer disc and bootcamp. The bootcamp assistant hangs as soon as I hit install. The screen goes black and freezes.
    Any help would be appreciated.
    thnx

    Hey johnnydoit,
    It sounds like you might be experiencing the symptoms from the following article:
    Boot Camp: iMac displays a black screen during installation of Windows 7
    http://support.apple.com/kb/TS3173
    There are steps within to resolve the issue, I'd run through them and see if that helps.
    Best,
    Delgadoh

  • Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

    I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

    Keep on trying, keep searching as there are quite a few work around's for different issues.
    One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
    Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
    Sorry I can't help more...

  • Which version of Windows to use with boot camp & Lion?

    Which version of Windows can I use with Boot Camp and Lion 10.7.1?
    Don't want to run Parallel or any other 3rd party program.
    Thanks.

    Windows 7

  • Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

    I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates.  I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6.  I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
    I now wish to install Windows 7 Professional 64 bit on this Mac Pro.  I have never had any version of Windows installed on this Mac Pro.  I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
    My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7?  This would be a real pain to do because the two connectors to the motherboard are hard to get to.  However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant. 
    Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
    Thank you in advance for responding.
    Tom

    NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
    How I would proceed -
    Install Windows on its own drive. 
    Pull all the other drives.
    Boot from Windows 7 Pro DVD
    Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
    Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
    Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
    No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
    The Mac Pro is as close as anything to a standard Wintel workstation. 
    Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
    AV-Test.org Test Security-Software

  • Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

    Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
    There is only 1 partition, so the Boot Camp process did fail.
    I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
    Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
    Here is some additional screen shots of the type of system I have.
    Thank you for your help with this issue!

    Which copy or version of Windows? and how where was it purchased?
    my window installed itself perfectly on another computer.
    One copy and you want to activate on two computers?
    With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s). 
    did you create 80GB or larger partition?
    also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
    OWC has up to 32GB, not cheap.
    http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
    Crucial is usally very helpful, try email cs.

  • Installing Windows XP-SP2 with boot camp

    I created a Windows XP slipstream CD with SP2 and then started the windows setup with boot camp. After i pressed "enter" the first time to setup windows it said that it couldn't read the disk or find a previous windows installed on my computer. Then it told me to insert a full version of Windows Vista, XP, 98, or 95. I do have the full windows 95 but i cannot insert the CD during the setup. Is there anything i can do to make this work?
    Thanks for any help!

    It sounds as if the XP install disc that you started your SlipStream build with was an upgrade and not a full install disc. For SlipStream to work with BootCamp, you must start with a XP SP1 Full install disc.

  • Cinema Display plus Mac Book Air Gen2 lagging in windows 7 with boot camp !

    Dear All,
    I have the Apple Cinema display 27 inch.
    Along with it I get the Mac Book Air 13 inch gen 2,with 2 go of memory and the integrated NVIDIA 320M (driver version:  8.17.12.5746) running on boot camp 3.2.
    The issue happened when I connect it to the the 27 Cinema display, things are getting slow, and my system is kind of lagging. Itunes music crackle and opening and surning on the web is not smooth.
    Do youk now how I could fix this issue which is very disturbing for such expensivesystem.
    Many Thanks !

    NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
    How I would proceed -
    Install Windows on its own drive. 
    Pull all the other drives.
    Boot from Windows 7 Pro DVD
    Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
    Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
    Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
    No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
    The Mac Pro is as close as anything to a standard Wintel workstation. 
    Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
    AV-Test.org Test Security-Software

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • Windows XP Pro - 2 GB RAM limit with Boot Camp

    Hello,
    I have a MacPro running windows XP Professional, have Boot Camp 2.1 installed, and my computer only sees 2 gb of RAM when I have 4gb RAM installed. OSX sees all 4 gb. I am very frustrated because many of the applications I use only run in Windows. As I know this is an outstanding issue upon further research, has anyone found a way to amend this (aside from switching to Vista 64) or know if Apple is planning to fix this issue? I fear that Apple's intentionally done this
    which makes it even more infuriating. This is NOT a Windows issue; we have other machines running XP with 4 GB RAM just fine, which leads me to believe that its a problem with Boot Camp or Apple's EFI (Bios).
    Thank you in advance for your input !

    Hi,
    it's a hard- and a software problem as well.
    Since 32-bit Windows has a limited range of adress space (4GB) to use for harware (PCI-E) extensions to use, the avaiable memory to use is diminishing the more expansion slots there are.
    With the Mac Pros 4 PCI-E slots which reserve their needed adress range whether they are in use or not, this leads to an avaiable memory of 2GB.
    Since 64-bit Windows has not the 4GB limitation, therefor the PCI-E adress ranges do not delimited the amount of useable memory.
    XP-64bit would also do this trick, but is not supported by Apple.
    Regards
    Stefan

Maybe you are looking for