Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829

Hi All,
I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
1. Remove Symantec Endpoint Protection.
2. Run System Update Readiness Tool
3. Install MS SP 1 and fails.
Here is the log file.
https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
Thanks,

Hi,
I suggest you download the full package, and try to install it in Clean boot Mode:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-in/download/details.aspx?id=5842
If the issue still persists, please try following command to repair Windows:
SFC /scannow
You can also try the In-place upgrade to clean your Windows and install the update again:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Kate Li
TechNet Community Support

Similar Messages

  • Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

    Hello,
    I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
    I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
    Failed to install the new preview build, please try again later. 0x80246007
    What could be the problem?
    Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
    for this VM. Now that I have this 80246007 error code.
    When looking up System log, the following error messages are listed multiple times:
    Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
    The errors are returned for the Event ID 20 by WindowsUpdateClient
    in task category Windows Update Agent..
    I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    registry key as suggested in Windows
    Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
    "BranchName"="fbl_awesome1501"
    "ThresholdRiskLevel"="low"
    "ThresholdOptedin"=dword:00000001
    Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
    However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.  
    Looks like Setup is having problems installing in a Hyper-V virtual machine.
    Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
    Any clue why installing under VM causes 9926 to fail?
    Thank you in advance.
    Well this is the world we live in And these are the hands we're given...

    Hi,
    According to the error message, this problem seems like update package installation failed during system upgrade.
    You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
    On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
    Roger Lu
    TechNet Community Support

  • Installation Failure: Windows failed to install the following update with error 0x800F0922

    Hi folks,
    I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
    to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
    all up to date.
    I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.
    Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
    This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
    I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
    Thanks for any help!

    Hi MM. Mr Kywildcat and Vegan Fan,
    GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information  pnly - hoping this could help someone - I resume some actions which allowed this the happy end
    1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
    2) I was influenced by the fact that this
    0x800F0922  error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
    3)   Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
    (whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for  x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
    4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
    5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
    KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
    --> always succesful.
    I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
    to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
    0x800f0922, but 0x80004003 :
    2014-02-15 21:29:13, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-02-15 21:29:13, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-02-15 21:29:18, Error  CBS    Startup: Failed to process advanced operation queue, startupPhase: 0.  A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
    issue remains until maybe a new KB corrects it, wrong :-) ?
    And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts. 
    Phil   

  • Windows failed to install the following update with error 0x80070005

    Hi,
    We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
    fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
    computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
    on one machine?
    Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
    KB Article Followed : http://support.microsoft.com/kb/968003/en-us

    Okay, good. The SURT shows no errors.
    So now we can blame the problem exclusively on the update itself.
    And yes... there are still known, ongoing issues with KB2862330.
    Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
    less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • SCOM 2012 R2 Agent Issue: Error 25211.Failed to install performance counters.. Error Code: -2147024809

    Hi All,
    I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
    I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
    I've rebuilt the Perfmon Counters based on this article:&nbsp;https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
    I've also enabled verbose logging on the msi installation:
    InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
    InstallHSPerfCounters: Installing agent perf counters. 
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057. 
    InstallPerfCountersLib: Retry Count : . 
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057. 
    Any help on this would be great.

    Hi Stefan,
    I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
    I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
    HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
    Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
    Written a SQL query to gather more information. SQL query I used is:
    SELECT
    ME.FullName,
    HSO.StartDateTime AS OutageStartDateTime,
    DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
    HSO.ReasonCode,
    DS.Name AS ReasonString
    FROM  vManagedEntity AS ME
    INNER JOIN     vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
    INNER JOIN     vStringResource AS SR ON HSO.ReasonCode =
    REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
    – CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
    INNER JOIN     vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
    WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
    AND DS.LanguageCode = ‘ENU’
    AND ME.FullName like ‘%SERVER NAME%’   –Change name here or leave %% for ALL SERVERS
    ORDER BY OutageStartDateTime
    This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
    Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
    Any help on this would be great.

  • Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

    I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
    Event ID: 10005
    Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
    Event ID: 1008
    The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
    first DWORD in the attached data.
    Any idea why I receive this error?
    Thanks
    Mike

    Hi,
    Please refer to this article:
    SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
    http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
    Alex Zhao
    TechNet Community Support

  • CcmSetup failed with error code 0x80070643

    I`m running Windows 2012 r2 with SCCM 2012 R2.
    Installed SCCM without any problems, but now I try to install the client and that`s not working.
    Tried to install client from SCCM and tried to install cliënt manualy on the client device. Both fail.
    Operating systems: Windows 7 and 8
    Installing client on Windows 2008 server==>OK
    Errors in the ccmsetup.log on client:
    <![LOG[MSI: Action 15:59:04: Rollback. Rolling back action:]LOG]!><time="15:59:04.973-120" date="07-30-2014" component="ccmsetup" context="" type="0" thread="7280" file="msiutil.cpp:314">
    <![LOG[File C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi installation failed. Error text: ExitCode: 1603
    Action:
    ErrorMessages:
    ]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="3" thread="7280" file="msiutil.cpp:876">
    <![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="3" thread="7280" file="ccmsetup.cpp:7202">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='311' will not be sent.]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="1" thread="7280"
    file="ccmsetup.cpp:9763">
    <![LOG['Configuration Manager Client Retry Task' is scheduled to run at 07/30/2014 08:59:13 PM (local) 07/30/2014 06:59:13 PM (UTC) time with arguments ' "/mp:cap-sccm01" "SMSSITECODE=CAP" /RetryWinTask:1'.]LOG]!><time="15:59:13.291-120"
    date="07-30-2014" component="ccmsetup" context="" type="1" thread="7144" file="wintask.cpp:315">
    <![LOG[Creating Windows Task Scheduler folder 'Microsoft\Configuration Manager'...]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="0" thread="7144" file="wintask.cpp:160">
    <![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="1" thread="7144" file="ccmsetup.cpp:10879">
    Errors in ccm.log on server
    ---> Unable to connect to WMI (root\ccm) on remote machine "CAP-LT24", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 30-7-2014 15:47:56 6248 (0x1868)
    Execute query exec [sp_CP_SetLastErrorCode] 2097152008, 0 SMS_CLIENT_CONFIG_MANAGER 30-7-2014 15:47:57 6248 (0x1868)
    Additonal Info: On the client devices we had Windows ITunes. Uninstalled Windows ITunes, but no effect.
    Please advise

    Hi,
    How about MicrosoftPolicyPlatformSetup.msi.log ?
    There is a similar problem in the blog below. You could have a look.
    http://blogs.msdn.com/b/george_bethanis/archive/2013/02/04/cm12-upgrade-of-a-client-to-sp1-fails-with-error-microsoftpolicyplatformsetup-msi-installation-failed-exit-code-1603.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error in push sccm client CcmSetup failed with error code 0x80070643 ccmsetup sccm 2012

    i want to push sccm client for all computer i enable automatic side-wide client installation 
     some computer get error code 0x80070643
    ccmsetup sccm 2012 this 
    when i tray manual installation get same error and ccmsetup.exe stopped 

    Duplicate of
    https://social.technet.microsoft.com/Forums/en-US/3bac4677-46b0-4d96-b63d-a819efcc7f35/error-in-push-sccm-client-ccmsetup-failed-with-error-code-0x80070643-ccmsetup-sccm-2012?forum=configmgrgeneral
    Please don't double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Using one Windows 7 64-bit Disk to install on different machines with different licenses

    I have Windows 7 64-bit full install disk that I purchased when I built my system.  Obviously it came with its own key, which I installed on my custom built system.  I recently purchased a Dell Optiplex GX620 computer that I want to use as an
    HTPC.  It came with Windows 7 64-bit installed.  Both of these Windows are 7 64-bit Home Premium.  Unfortunately, the Dell has only got an 80GB HDD.  I want to upgrade to a 1TB.  I also want no problems with the Windows so don't feel
    comfortable doing an image from the 80GB to the 1TB, so I want to do fresh install of Windows 7 64-bit.  The Dell came with a Windows 7 license key sticker on the side.  My question is:  Can I do a fresh install of Windows 7 64-bit on the Dell
    with the new 1TB HDD using my Windows 7 64-bit full install disk and the license key on the side of the Dell computer and activate it with no problems?

    Q.  "Can I do a fresh install of Windows 7 64-bit on the Dell with the new 1TB HDD using my Windows 7 64-bit full install disk and the license key on the side of the Dell computer and activate it with no problems?"
    A.  Yes, but you'll likely have to "activate by phone".
    Carey Frisch

  • Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6

    Hi all,
    I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
    I've checked windowsupdate.log and theese are the settings of the client:
    AIR Mode is disabled
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Policy Driven Provider:  http://MyWSUS.MyDomain.local:8530
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Detection frequency: 22
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Target group: CSM Servers
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Approval type: Pre-install notify (Policy)
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Auto-install minor updates: No (User preference)
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    I confirm that from the test server I can telnet to my wsus server on TCP port 8530

    Hi,
    This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
    You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
    computer
    http://support.microsoft.com/kb/2724184
    Make sure that the URL is correct and the name can be resolved.
    Hope this helps.

  • Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

    I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
    using LANDesk to deploy it. All methods are failing.
    I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
    Microsoft Updates before this one.
    When I try Microsoft Update, I receive the following error:
    Code B56  Windows Update encountered an unknown error.
    Below is the WindowsUpdate.log excerpt:
    2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
    2013-08-06 12:45:33:328 3952 dc4 Handler :: START ::  Handler: MSI Install
    2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
    2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
    2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
    2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
    2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
    2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
    2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
    2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
    2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
    2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
    2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
    2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
    2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
    2013-08-06 12:46:42:265  112 600 Report Uploading 2 events using cached cookie, reporting URL =
    http://wsus:8530/ReportingWebService/ReportingWebService.asmx
    2013-08-06 12:46:42:358  112 600 Report Reporter successfully uploaded 2 events.
    2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
    2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
    2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
    2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
    2013-08-06 12:47:52:012  112 938 AU >>##  RESUMED  ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
    2013-08-06 12:47:52:012  112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
    2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
    2013-08-06 12:47:52:012 3952 dc4 Handler ::  END  ::  Handler: MSI Install
    2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
    2013-08-06 12:47:52:168  112 5c4 Agent *********
    2013-08-06 12:47:52:168  112 5c4 Agent **  END  **  Agent: Installing updates [CallerId = AutomaticUpdates]
    2013-08-06 12:47:52:168  112 5c4 Agent *************
    2013-08-06 12:47:52:168  112 938 AU Install call completed.
    2013-08-06 12:47:52:168  112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
    2013-08-06 12:47:52:168  112 938 AU #########
    2013-08-06 12:47:52:168  112 938 AU ##  END  ##  AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
    2013-08-06 12:47:52:168  112 938 AU #############

    I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system.  Researching the errors I got led me to discover the following:
    1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update.  Some were able to get it installed by first doing a Repair on Office 210 itself
    first, and then installing SP2.  But many others have not been able to install it at all.
    2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory.  This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
    during the installation.  Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
    The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
    I am one of those people.
    I found a posting that described a way to recreate MSOCACHE from the source CD.  I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file.  I found the file on the CD and
    pointed the installer to it, but it said the file was not found and quit.  So my install still failed.
    The last response I got at the Microsoft Answers site was to wait until SP2 is debugged.  It's not clear to me this will ever happen, but we'll see.
    Birk Binnard http://www.birkbinnard.com

  • Failed to install photoshop cc 2014 with exit code 34

    I was told:
    1 fatal error(s), 0 error(s) FATAL: Payload 'Camera Profiles Installer 8.0.0.15 {3F023875-4A52-4605-9DB6-A88D4A813E8D}' information not found in Media_db.

    Thank you, Jeff,
    I downloaded the Adobe Creative Cloud Cleaner Tool and deleted all previous versions of PS on my iMac. I succeeded to install Photoshop CC 2014 on my MacBookAir and MacBookPro as well. Grateful for your help.
    Regards,
    Lee Man Kuen
    (my Adobe ID: (1) [email protected] and (2) [email protected] Can I combine them into one single Adobe ID?)

  • DPM Agent Installation Failed with Error code =0x80070643

    Hi,
    We had an Virtual Machine TFS server 2010 which had SQL server 2008 R2 installed on it.
    On this Server we were running an DPM 2010 agent and it was fine. 
    Then I had uninstalled DPM 2010 agent and  try to Install DPM 2012 R2 Agent on this Virtual Machine it gives me error 0x80070643. And for other VM the agent installation is fine.
    When I checked on DPM agent logs in Windows/Temp folder it gives me below error.
    I had tried with Deleting DPM Registry but still the Problem remains same.
    Thanks

    Hi,
    Earlier the Protected Server had DPM 2010 Agent installed and while Troubleshooting I had already deleted the
    HKLM\SOFTWARE\MICROSOFT\Microsoft Data Protection Manager\Setup Registry 
    And Tried to Reinstall Agent but still it gives same error.
    Regards,
    Nadeem

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows 8.1 upgrade fails with error code 0x80070057

    I have attempted to upgrade Windows 8 Pro (Msdn) to 8.1. The install gets as far as 'Applying changes, then comes up wiith the extremely helpful error message 'The application wasn't installed'.  Clicking on view details gives, the  equally helpful,
    'Something happened and Windows 8.1 couldn't be installed> Please try again. Error Code: 0x80070057.
    What is going on here?
    On a second note, I have two PCs running Windows 8. One of them had the upgrade on offer this morning, the other didn't.  Curiouser and curiouser.

    Hi,
    Please refer to this article before you upgrade to windows 8.1:
    Update to Windows 8.1 from Windows 8
    http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
    if the process still fails, try to upload the cbs.log and windowupdate.log.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for