Windows 7 start up says feature requires removable disk or usb drive

I have a hp pavilion windows 7 home, the last 4 times I have tried to log on I get a pop up that says feature requires removable media like a floppy disk or usb drive. Insert then try again. I have never seen this before and have not had any problems until now. Can someone please let me know whats going on. I have not added or changed anything to cause this and it's very frustrating not able to log on quickly.Thanks

Deb04, welcome to the forum.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

USB Recording - requirements for the external USB drive

What are the requirements for the external USB drive to be recognised by the TV?
I've tried two now, which can both be seen by the TV to show media, but neither are recognised by the TV to be used as USB Recording space.

Hi,
I have a similar question.
I have a 40L6353 and I cannot seem to playback anything recorded onto USB.
I have tried a large 500 Gb Toshiba (USB powered) drive and 2 or 3 others such as an 8 Gb SanDisk and a smaller capacity non branded 500 Mb stick.
All of the above I have formatted in the TV. When I press record the pop-up staes that recording has started and when I press stop it asks me to confirm. When I go to the recorded list it shows the files but says that they are an unsupported file format!!
I can play videos and music transferred to another Toshiba 500 Gb drive by PC.
I have also tested the sticks and they pass the 2 on-screen tests and I believe when a stick is inserted I can pause live TV.
Does anyone have any ideas?
I have been trying to get this to work for over a week - if there is a fault I will need to go back to the vendor but I want to be sure it isn't operator error.
Thanks in advance.
Message was edited by: banzai

IPod not showing up in Windows or iTunes? Showing up as removable disk :F ?

I have a 5th generation iPod Nano and I have had it for about a year. I tried plugging the iPod into my computer (Windows), but my computer and iTunes do not recognize it. The first few seconds when I do plug in my iPod, I go to My Computer and I see my iPod with my name beside it, but after about 2 seconds, it changes to Removable Disk :F and then it disappears completely after another second. Last night, when I upgraded my iTunes version, the iPod connected fine, but today, my iPod has not been recognized at all. Help please?

iPod Repair Tutorials
iTunes & iPod Hints & Tips

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

TS3479 I have a iMac mid 2011 with Mac OSx Lion 10.7.4. I was using iMovie suddenly today I found iMovie is not starting a window is popping up saying "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics ca

I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
iMovie requires requires a graphic card that is compatible with Quartz Extreme................
What is these nonsence thing happening ........
Can any body provide some clue how to resolve the issue
Thanks and regards in advance
Bijan

If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.

Need help installing windows on bootcamp,instructions say to install on Disk 0 Partition 3 Bootcamp but my computer reads Disk 0 Partition 4 Bootcamp, what should I do?

My comp shows:
Disk 0 Partition 1
Disk 0 Partition 2
Disk 0 Partition 3
Disk 0 Partition 4 Bootcamp
What should I do? I'm right in the middle of this, can someone please help me, Please! Thanks

Romo01,
There is a Boot Camp forum located at:
https://discussions.apple.com/community/windows_software/boot_camp?categoryID=23 7
I'd recommend reposting there first, it is the place Boot Camp and Windows guys hang out.

IPod nano being read by Windows as "Removable Disk"

I have a 4gb nano, current firmware 1.1.1. Now, I've updated it before to the music on iTunes (back when it was on 1.0), but then one day, the iPod suddenly showed the exclamation/folder icon. So I restored the iPod with firmware 1.1 (it recommended I update, so I did), but my computer couldn't recognize the iPod. It kept showing a little baloon (I'm using XP) saying that the device could not be written to (only when I unplugged it, however). So, I thought that maybe it was just trying to write to it very slowly, but after leaving it there for a day, supposedly "writing" to the iPod, there were no results. I updated to 1.1.1, thinking that maybe 1.1 had a bug that caused this, but then I was confronted with the problem of nothing recognizing it at all. Windows now shows the iPod as a "Removable Disk", and when I double click it, it shows the loading mouse for about a minute; until it says
"E:\ is not accessible.
The Files or directory is corrupted and unreadable."
NOTE: I have NEVER used any third party software like linux or "hacked" my iPod.
So, after looking around, I followed the method here:
http://docs.info.apple.com/article.html?artnum=93716
Because I could see the device in My Computer but couldn't open it, and iTunes didn't recognize it.
However, it was not a success, so I tried the method here:
http://docs.info.apple.com/article.html?artnum=301343
But that also didn't work. I am now at a loss for explanation, can anyone help me? This is my mother's iPod, and she's leaving on a business trip in two days; I'd like to get her music back on it so she can use the iPod on the plane. Any ideas?

It wasn't being recognized by anything... including the updater. But after searching through other threads, I found that other people have had this problem as well; it seems the firmware is the prime target for the scre-up. Thanks, Benoa, for the steps! Although you've probably heard it enough times already.

Can I use a USB drive to install windows 7 on my Macbook Pro?

I currently have the Windows 7 iso on a usb flash drive. I am running bootcamp 4.0.3, and there is no option to create a windows 7 install disk via usb drive. Also I cannot download the Windows support software. Is there a direct download to the drivers, or another version of bootcamp that would allow me to install via usb, like the MBA? Or is there a way to work around this problem? I don't have access to any writable CD/DVDs so the usb drive is really my only option currently.

Copy the ISO to your disk and try using that to write the ISO to (another) USB device.
Instructions for the Air: https://support.apple.com/kb/HT4407
download a free iso burning program for Mac (we used SimplyBurns Mac). That program runs you through the necessary steps to properly burn the iso file you need. After doing so, Bootcamp recognized the installation file and everything worked as it should.
https://discussions.apple.com/thread/3410900?start=45&tstart=0
http://simplyburns.en.softonic.com/mac
If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

SATA hd coming up as removable disk

hey i recently installed a Seagate SATA 120gb HD, formatted and installed windows xp. and i'm getting the removable disk icon coming up in the taskbar. the sata drive is the only hard drive on the system. is there anyway to prevent the sata drive from showing up as a removable drive???
thanks
AMD 64 3400+
MSI K8N NEO Platinum
1 GB DDR 400 PC3200 RAM
EVGA GeForce 6800 GT 256MB
Seagate SATA 120GB 7200RPM HD
550 Watt PSU

This is normal. I think you can hide the icon in winxp in one of the settings menus.

Removable USB drive not automounting in xfce4

Removable USB drives automount in every other window manager I've tried(lxde, gnome, kde). I have thunar-volman installed(not sure what it's for though), and I've went to Applications Menu > Settings > Removable Drives and Media and ticked "Mount removable media when inserted", to no avail.
My .xinitrc file:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
exec startxfce4
# ...or the Window Manager of your choice
# exec startlxde
Manually mounting the USB drive works however.

I have decided to ditch xfce4 and go with KDE, which automounts without any fuss.

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Need help REMOVING Office 2004 Test Drive

Can someone please help? I'm about to install Office 2004..... the install instructions say to FIRST remove "Office 2004 Test Drive" if it's on your computer. (Test Drive appears to be a sample of Office).
The Office Test Drive folder is on my computer.....however, I have never launched anything in it.
Per instructions, I did try to use the "Remove" program (inside the Test Drive folder).
All went well, except when "Remove" did its search, nothing showed up. Hence, when clicking "continue," I got a message that I had not removed anything.... new choices being "go back" or "quit."
Meanwhile, the Remove program DID generate a text file on my desktop "Remove Office log.txt" - which shows:
Found these items:
OFC2004TDFOLDERS: /Applications/Office 2004 for Mac Test Drive
Unfortunatley, this information does not show up in the "Remove" program, so I cannot instruct "Remove" to remove it. (which seems a bit odd, I know, but there you have it.)
QUESTION ....
Am I ignoring the obvious?
Since I have never launched anything in the "Office 2004 Test Drive" folder, might this mean that none of the apps are actually installed on this computer?
If so..... does this mean I can simply drag the entire "Test Drive" folder into the trash, empty trash, and all will be gone?
Then, safely install the actual Office 2004 CD?
iBook G4 1.42GHz PPC, 14" Mac OS X (10.4.6) also iBook G3 600MHz/ MacOS 10.1.5

It seems to me that when I did that I inserted the
new Office CD and using the uninstaller on the CD
removed the Test Drive.
Thanks for your help, Al.
When I insert the Office CD, I don't see an uninstaller....at least not immediately visible. All I see are 2 options:
Office Setup Assistant (recommended)
or
the Office folder which you can just drag to the hard drive to install all components.
Do you think the 'uninstaller' is in that first "Setup Assistant" option?
And if so.....what concerns me is that if it doesn't work (i.e., behaves like the "Remove" I've already tried to use)....will I still have the option of quitting, and going back and just dragging that folder to trash before continuing in the Setup Assistant?
Logic tells me that you're right....that by never having launched anything, none of the components of Office Test Drive are actually installed....no users or preferences or anything created. So probably I can just drag that folder to the trash. Problem is, I have very little faith/confidence/ that MY logic is anywhere near the same "logic" of Microsoft.
(am quite sure I fit the Apple profile....cause I definitely "think different.")
I'm wondering if the better part of wisdom might be to go ahead and trash that Test Drive folder.....then proceed with the Office Setup Assistant....and if an uninstall shows up in there, using it "just in case" anything was left behind? Sound reasonable to you?
iBook G4 1.42GHz PPC, 14" Mac OS X (10.4.6) also iBook G3 600MHz/ MacOS 10.1.5

I3 window manger & automount external hard disk / usb drive

Hi,
I using arch x86_64 with 3.11.5-1-ARCH #1 SMP PREEMPT kernel + i3 window manager + pcmanfm.
But i'm unable to automount my external hard disk or usb drive.(I have installed gvfs package as well.
Also is there any gui tool to configure keybinding? (something like obkey in openbox)
Please help.
Thank you.

epic wrote:Also is there any gui tool to configure keybinding? (something like obkey in openbox)
I think you need to look at https://wiki.archlinux.org/index.php/I3#Volume_Manager and the output of man i3
tl;dr - the ~/.i3/config file does it nicely.
Here is mine:
ewaller$@$odin ~ 1001 %cat .i3/config
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
#font -*-charter-medium-r-*-*-*-100-*-*-*-*-*-*
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
font pango:DejaVu Sans 8
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+Shift+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exit
#bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the windows width.
# Pressing right will grow the windows width.
# Pressing up will shrink the windows height.
# Pressing down will grow the windows height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "resize"
# Bindings for my HP Pavilion
bindsym XF86AudioPlay exec mpc toggle
bindsym XF86AudioPrev exec mpc prev
bindsym XF86AudioNext exec mpc next
bindsym XF86AudioStop exec mpc stop
bindsym XF86AudioRaiseVolume exec pavolume increase
bindsym XF86AudioLowerVolume exec pavolume decrease
bindsym XF86AudioMute exec pavolume mute
bindsym XF86Save exec dmenu_run
bindsym $mod+x exec x48
bindsym $mod+Tab workspace next
bindsym $mod+Shift+Tab workspace prev
bindsym Mod1+Tab workspace next
bindsym $mod+Menu exec i3-winmenu.py
bindsym $mod+XF86Save exec gmrun
for_window [title="Execute program feat. completion"] floating enable' border none; focus mode_toggle
for_window [title="x48-0.6.4"] floating enable' border none; focus mode_toggle
for_window [title="Wicd Network Manager"] floating enable' border none; focus mode_toggle
# Float notifications
for_window [class="Xfce4-notifyd"] floating enable; border none; focus mode_toggle
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command i3status
#exec --no-startup-id i3-msg 'workspace 2; exec firefox; workspace 1'
exec --no-startup-id i3-msg 'workspace 10; exec claws-mail; workspace 1'
exec --no-startup-id exec nitrogen --restore
exec --no-startup-id exec xcompmgr
exec --no-startup-id exec conky
exec --no-startup-id exec mpd
#exec --no-startup-id emacs
exec --no-startup-id exec wicd-gtk -t
ewaller$@$odin ~ 1002 %

Just upgraded to latest iTunes for Windows. Rebooted the PC as required. When I bring up iTunes I get a pop message saying "An unknown error occured (-42110)". What does that mean?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required after the update. When I start iTunes I get a popup message saying "An unknown error occured (-42110)."
What does it mean?
How do I fix it?
Thanks!

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Windows 7 start up says feature requires removable disk or usb drive

Similar Messages

Maybe you are looking for