Windows 7 syn over wifi

So after reading almsot every single post here on windows 7 wifi syncing, I cannot find any solution that matches my problem or works at all. I I have to restart iTunes at all, I lose the ability to sync over wifi. I am running windows 7 HP SP1. I have downloaded and installed the latest iTunes.  My question is did Apple kill alll support for windows 7 and iTunes? If not, what can I do to fix this issue? It's bad enough that iTunes eats up so many resources on my pc to NOT have this ability.  PLEASE HELP!

Hello, tatdaddypmp076. 
Thank you for visiting Apple Support Communities. 
Windows 7 is still a supported operating system to Wi-Fi sync with iTunes.  This issue can be quite complex to resolve as there are many variables that come into play when Wi-Fi syncing.  One of the most common solutions is outlined in the troubleshooting steps below. 
Restart your network router
Restart your home network router using the manufacturer's instructions. You may need to disconnect the power cord for 30 seconds or more.
Note: During this time, Internet services, such as a VoIP-based phone, won't work, and you may need to reset additional network devices.
Check your network connection
Make sure that your Wi-Fi network has an active Internet connection.
Make sure that you connect your iOS devices and computer to the same network over Wi-Fi.
Check for network configuration changes that may interfere with syncing:
VPN configurations
Extending the Wi-Fi network through multiple wireless access points or routers
Guest networks or other security configurations that limit access between devices
Routers that configure different networks for different frequencies such as 2.4 GHz and 5.0 GHz
Connecting the computer over Ethernet
Wake up your computer and open iTunes. If your computer is asleep or iTunes isn't open, the device may not sync.
Update your router. If you're using an AirPort or AirPort Time Capsule, you can learn more about firmware updates. If you're using a router from another manufacturer, contact the manufacturer to ask about available updates.
Check for network interference
If you see performance issues when you sync over Wi-Fi, something may be causing wireless interference:
Microwave ovens
Cordless phones
Physical barriers, such as metal walls or distance between your computer, base station, and iOS device
Try the following to reduce network interference:
Move your iOS device and computer closer to the Wi-Fi router or base station.
Check for sources of potential interference.
Remove your iOS device from any case, stand, or attachment.
Open Safari and try to load a webpage.
Check firewall settings
If you enabled a firewall on your router or computer, make sure that your computer and iOS device can communicate.
Follow these steps to use the built-in firewall option with iTunes on your Mac.
For third-party firewalls and security software, see the developer or manufacturer for assistance.
Mac computers use port 123 to set the date and time automatically. Incorrect date and time on a computer or iOS device can cause connection issues. If you don't know if your router has a firewall or if the required ports are open, follow these steps:
Enable Wi-Fi syncing for additional iOS devices on your network to see if they have the same issue. (See theprevious steps to enable Wi-Fi syncing for additional devices.)
Test your device on a different network. If the device works on another network, the issue may be your router or network configuration. Contact your router manufacturer or Internet service provider for additional troubleshooting.
If you use another security or firewall software on your computer or router, you can troubleshoot security software issues, contact the manufacturer, or check the documentation to learn how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/ts4062
Cheers,
Jason H. 

Similar Messages

  • No network user log in at login window when over WiFi??

    I can only log in as a network user (home directory on server instead of local) from computers that are connected via wired Ethernet, but not on computers connected via WiFi. From any computer a local logged in user can access server resources -- they just can't from the login window. It is as though WiFi is only enabled once logged in (however it still doesn't work even if I use Fast User Switching to get a login window.)
    Anyone experiencing this problem and found a solution?
    As a secondary issue, I haven't been able to figure out how to automount shares via any technique nor have I found an explanation of how to do it in the manuals. Enable Automount in Server Admin doesn't seem to do it for "Shared Library Folder" however at least something appears in /Network/Servers for "User Home Folders and Group Folders, although it isn't mounted. I've also tried Workgroup Manager, Perferences, Login Items, adding shares there, also to no avail. All the shares will mount via client system command so the sharing does seem to be working.

    I don't have my wireless entwork set up yet (no one really needs it), so can't help with that issue. Although, I seem to recall Fast User Switching has issues with network accounts anyway, so that issue may be unrelated to your original WiFi issue.
    As for automounting, you should have it set up in Server Admin first (as you seem to already). Then you need to also set it up in WGM much like it seems you tried, but make sure you're doing it from a client machine and not from the server so it populates with the proper path info (or you could correct it in the Details section if you know what you need, but that's unnecessarily cumbersome). Also, make sure the "Authenticate selected share point with..." is checked for the share as well. Of course, if you're already doing this from the client, then I've no clue as it seems everything should be fine. That's how mine are set up with no issues, although I also have them set up on the dock, but that should be irrelevant just for mounting purposes.
    Message was edited by: Rikakiah

  • Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

    Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
    Making sure everything is allowed through firewall
    Rebooting phone/laptop/router
    Disabling ipv6
    Disabling all networks except the one curently on
    Re-installing iTunes
    Restoring iPhone
    No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • Prioritize LAN over Wifi in Windows 7

    Is there a similiar setting in Windows 7 that tells the PC to always use the LAN connection over WiFi when detected? Also, is there a away to push this setting out via Registry or GPO?
    Minimize the number of simultaneous connections to the Internet or a Windows Domain
    This policy restricts simultaneous connections to the Internet or Domain network. If there
    is at least one active connection to the Internet, a new connection (automatic) to the Internet will not be made. This is the same for Domain network. Manual connection will not affected by this policy. If there are multiple simultaneous connections to the
    Internet or Domain (i.e., plug-in Ethernet while already connected to WiFi), the less preferred connection (i.e., WiFi) will be disconnected after the OS detects that it is no longer actively being used (i.e., network traffic over the less preferred connection
    drops below a certain threshold).
    Path: Computer Configuration » Administrative Templates » Network » Windows Connection
    Manager
    Jason

    Hi,
    I haven't found this similiar policy in Windows 7, but we can change the order in this way
    Open the Network and Sharing Center.
    Click Change adapter settings.
    Press <kbd>alt</kbd> to make the menus visible, select Advanced Settings... from the
    Advanced menu.
    Reorder the items in Connections so that you Local Area Connection is on top.
    Or you can manually configure the Metric on each adapter, please refer to this link:
    An explanation of the Automatic Metric feature for Internet Protocol routes
    http://support.microsoft.com/kb/299540/en-us
    If you want to change the order in all PCs in a domain, I suggest you write a logon script, then push it to all client via GPO, you can refer to this link
    http://www.chrisleblanc.org/modify-network-card-bindings-script-command-line/
    NOTE
    This response contains a reference to a third party World
    Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft does not control these sites and has not tested any software or information found
    on these sites.
    or this script form Technet website
    Disable Auto Connect on Wireless Network Script
    http://gallery.technet.microsoft.com/scriptcenter/Disable-Auto-Connect-on-59c83f1e
    Yolanda Zhu
    TechNet Community Support

  • DL2100 Accessing files over wifi on Windows 8.1

    How's it going folks, just got my small company a DL2100 for all our file sharing needs as well for accessing our stuff over the net and the my cloud features are working fine as advertised~  We have a couple of computers running and accessing the DL2100 over our network, most are fine, but we've found that our Windows 8.1 systems are having issues in both reading/writing into the drives over our wifi network. This is using the admin account to access. Reading folders and files take a long time to load, and moving files will result in an intermittent freeze(Not Responding) and subsequent failure in the task =(  Strangely, the Macbooks accessing the drives over wifi, and both Windows 7 and 8.1 machines accessing through ethernet cables have no problems at all!  Any ideas?   

    I do not believe that a soulution is to set a static IP, hack the registry or any other extraodinary procedures.  As I mentioned above, my Win7 and Win8 laptops work great with my DL2100.  They are both wired into the network, so today I disconnected the ethernet and connected the Win8 using the wireless at both the 2.4G and the 5G bands and both work perfectly with the network and the DL2100.  I was able to stream/play videos from it to the Win8. I have no static IPs set for anything, I have Norton Security so no firewall issue, and I have never hacked the registry.  I just have a carefully configured Home network with around 30 or so devices connected to it (both wired and wireless) and I have no network issues.  In the past I had some issues, and what cleared them up was making sure I had a properly functioning Windows Master Browser and the solution was to have set up a permanent Master Browser from a device that was ALWAYS on.  A new router had that capability, and so my router is the MB and has been for a few years..  The DL 2100 can also be designated to be the Master Browser via its Dashboard.  I do not have mine as MB because only one Master Browser is needed and mutiple ones can and do cause problems. First step is to know what a Master Browser is, and that can be found easily.  The second thing is to find out what device is currently acting as the Master Browser.  You can easily find this out with a handy little free program called LANSCAN found here:  http://scottiestech.info/2009/02/14/how-to-determine-the-master-browser-in-a-windows-workgroup/ Install it on your Win PCs and notice that the MB can change if a PC is turned off or on.  If a PC is acting as the MB, that is likely the problem, so if you have no other way to set a permanent MB, then do so in the NAS.  Using the LANSCAN program, determine that your NAS is acting as the MB before proceeding to check things out. Rebooting of PCs and NAS will be necessary. Even if setting up the MB does not solve this problem, it is still a good thing to have a permanent MB in a network. Good luck. 

  • I have iphone 4s that won't sync. Using windows 7, iphone software is up to date as is itunes. Itunes says sync session could not be started when iphone plugged in or over wifi.

    Have tried to sync my iphone 4s over wifi and using usb. Both methods unsuccesful. Have checked to make sure updates are not needed for iphone and itunes, have evem restored iphone system which wiped music, pics and apps from iphone. Message comes up saying "sync session could not be started." Windows 7 recognises iphone is there, as does itunes but itunes will not sync with iphone. Don't know if it helps at all but i did recently add an old 2nd gen ipod mini to the same itunes. Would this have any affect on iphone not syncing? Any advice would be amazing as this is very frustrating. Thank you in advance to anyone who can help.

    You get this message when trying to back up to iCloud?  That error message is normally associated with backing up to your computer using iTunes, not backing up to iCloud.  Check Settings>iCloud>Storage & Backup to be sure iCloud Backup is turned On at the bottom.

  • Cannot get iPod touch to sync over wifi with my Windows 7 PC with iTunes 10.5

    I have checked the box under summery in the options to sync my iPod Touch over wifi.  It still doesn't work.. PLEASE HELP!

    If you mean that your iPod does not appear under Devices in iTunes see the following:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Otherwise please provide additional information like what happens when you try to sync. Error messages?

  • IPad 3 not showing up in iTunes (Win7_64) over WiFi

    I have an iPad 3 I'm trying to sync over my WLAN.  It's running iOS 7.1 and connecting to iTunes 11.2.2.3 on Windows 7 64-bit.  Upon launching iTunes, the device will appear in the left navigation pane after about 10 seconds, and will stay there (greyed out with a spinning progress wheel) for about 15-20 seconds before it disappears.  I am never able to display the status or contents of the device over a wireless connection.
    -USB connections do work and I am able to manage, browse, update and sync the device.
    -I have tried connecting over USB and checking/unchecking the "Sync over WiFi" box.  That has not solved the problem.
    -I have tried establishing custom inbound and outbound Windows Firewall rules to allow all traffic to all programs and ports  from the iPad's internal IP (10.10.10.18 on a /8 network), but that hasn't fixed the problem.
    -AppleMobileDeviceHelper.exe, AppleMobileDeviceService.exe, iCloudServices.exe, iPodService.exe, iTunesHelper.exe, iTunes.exe and mDNSResponder.exe are all running at the time of attempted (and failed) sync.
    -Wireless syncing worked properly while on iOS 5.  Really regretting updating to iOS 7 right now.  Lesson learned, unlikely to ever update again.
    I've tried a number of solutions but as I cannot recall 100% of what I've already tried, I am willing to start at square one to get this resolved.  For what it's worth, I'm a 14-year IT professional so you can talk to me about pinging, firewall rules, subnets (iPad and PC running iTunes are on the same subnet), protocols and ports and I will know what you're talking about.  Hope that helps speed things along.
    Any assistance you can render would be most appreciated.

    Wireless Sync
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable.
    Click the Device button in the upper-right corner. (If viewing the iTunes Store, click the Library button first.)
    If you don't see your device, choose View > Hide Sidebar.
    In the Summary tab, select "Sync with this [device] over Wi-Fi."
    When the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it.
    The iOS device will sync automatically when the following conditions are true:
    The iOS device is charging.
    iTunes is open on the computer.
    The iOS device and the computer are on the same Wi-Fi network.
    While the iOS device is in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.

  • 320N Freezes when trying to transfer data over wifi

    I have the 320N and I am very frusterated.  I would just take it back, but I bought it brand new on Amazon.com, meaning I will have to pay shipping because I threw out the box and the return shipping form for RMA's!  I don't even know if Amazon will take it back without that paperwork, but anyway here's the issue...
    I don't have any N cards yet, but I upgraded to this router because my home internet service is faster than what my older WRT-54g could route.  This new router does route and I can now achieve the rated speeds of my ISP (50/10 mbps). 
    I can transfer large files 6+ GB WIRED between any of the LAN ports on this device.  However if I try to transfer much data over wifi, the router will simply stop working.  The lights on the front work fine, they blink like there is activity, and the power LED is solid, but it won't pass traffic and the wifi SSID dissapears.  I run a constant ping to the router (ping -t 192.168.1.1) and I get <1ms replies.  On my laptop I initiate a download of a 1GB file which is shared in my windows 7 homegroup.  Within a minute or two the constant ping to the router starts timing out.  Internet access to anything (wired or wireless) instantly ceases.  New introduced devices will not grab a DHCP address.  Existing PC's whom already have their DHCP address can talk to each other only if wired.  The wireless transmitter stops broadcasting the network and devices no longer see it on the airwaves.  The only way to fix it is to power cycle it.
    It doesn't even have to be a large file over wifi to transfer.  Just now as I'm typing this post I noticed the constant ping on my other monitor started timing out.  I power cycled the router in time for me to submit this post.  In fact I had to do it three times in the time it took me to write this post.  This is the most frustrating experience I've had with any wifi ap/router, and I play with Cisco gear at work that run real IOS.
    Here's what I tried so far.
    Reset factory defaults by holding in the rear reset button for over 30 seconds.
    I can confirm this resets the defaults as the password and all other settings are back to default.
    I tried WPA2 Personal.  I tried WPA.  Router still freezes.
    I tried it with just the default settings.  Router still freezes.
    I've reset the router numerous times.  Still freezes.
    Power cycle it for more than a minute.  Still freezes.
    Reflash it with Linksys's latest firmware.  Still freezes.
    What do I do next?  I have a feeling it's the same problem as in a lot of the HP Printer firmware boards.  That problem is poor solder joints on the BGA processor connection.  To fix that you put the formatter board in an oven at 400 degrees for 5 to 8 minutes.  After that time you just let it cool to room temperature.  The oven heats the poor solder joints enough so that it reseats and gets a better connection.  There are hundreds of posts of success on this.  I also hear that the solder connection problem exists for many of the older revision Xbox 360 game consoles causing the infamous "Red Ring of Death".
    So do I try to fight with Amazon to take this back and eat the shipping?
    Do I void my warranty, open the device up and put the board in the oven?
    Do I buy another router from a closer store, but then put this one in the box and take it back?
    Do I just cut my losses?
    Do I just use this as a wired router (disable Wifi) and hook up my WRT-54g and make that act as just an access point?
    Thanks for the advice. 
    Solved!
    Go to Solution.

    Ok I've had my replacement 320N for almost 1 full week now, and while at first it was fine, come Sunday it appears to freeze during heavy transfers.  I was streaming an HD movie to the laptop connected to the TV.  3/4ths of the way through the movie it started skipping.  What do you know, the whole network was down.  No internet or anything.  Power cycle the router and everything was back up.  Needless to say, I finished the movie through the wired connection.  The next day I tried copying 8GB of data wirelessly.  The SSID vanished 1/3rd of the way in during the transfer.
    What is wrong with this stuff?  Linksys doesn't make things like they used to.  This 320N is so cheaply made I don't think I could recommend it to anyone.  I might see if I can send this back to Amazon and get a Netgear.

  • Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

    please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont  know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • Can no longer sync over wifi after switching router to sitecom

    I use iTunes on a Windows PC and have an iPad and an iPhone. I sync these since iOS 5 over wifi. It worked perfectly when I had a Linksys router. I have changed my router to a sitecom because the Linksys was failing. The problem is that syncing over wifi is no longer working.
    Technical setup, the PC is connected via network cable, iTunes 10.5, both devices are iOS 5.0.1 and the devices are connected to power when I try to sync. If I sync via usb, it works and as I said, the only change is the router.
    I can see the devices show up in iTunes, so that part works. I can click on them and that works, but if I try to sync or select the apps tab, I get a message box saying that the device cannot be found.
    I have disabled all security features on the firewall just to make sure none of that gets in the way but nothing. I have nat enabled and can access my PC from the outside fine. If it helps with the research, everything that worked on my previous wifi router works on the new one (including all external stuff through nat) except for ftp. Can't get that working.
    I hope you can provide the answer to the riddle.

    Minor update:  I have multiple PC's in my office.  This same iPad and other apple devices properly work and sync with their connection to this other computer.  Both computers are running the 64bit iTunes and both have Windows 7 64bit OS running on both machines.  I tried deactivating firewalls and even deleted the iTunes with a fresh installation with no avail.
    Something is keeping my Apple mobile devices (iPods, iPads) from being recognized within iTunes.  However, they all are properly recognized by my PC.

  • Syncing with iTunes over wifi doesn't work

    My iTunes sometimes does not recognize my iPhone... but sometimes it does. When I click to sync it will start but it will get an error eventually like "Sync failed to start" or "Unknown error -50".
    I am not sure why iTunes will not sync. It used to work, but lately it hasn't been.
    I put a bunch of new music on iTunes yesterday from old CD's I had and when I went to sync it showed it did, but when I went to play my music on my iPhone all the songs were just grayed out so I couldn't click on them....
    so I used to USB cord and it synced fine...
    So can it not send that much data over wifi or something?
    I'm using iTunes on my Windows 7 laptop. I also have an iPad it won't sync with either.
    Thx.

    Which application are you trying to use?
    The manual mentions setting up an NMEA port where you post describes a COM port.  In the printing world a COM port is a USB physical port or oldschool Serial port.  These may not be the same thing which might explain why your app is not working. 
    Lookup your installed ports (WinXP):
    1. Navigate to Start > Run
    2. Enter "cmd"
    3. Click OK
    4. Enter "netstat -a"
    5. Scroll through the list and review all available ports
    If your port is not mentioned above by the port number you selected from the Wi-Fi over GPS screen then it is not active and will not be useful for your apps.  From the manual it looks like the default port number is 10110.
    I would check the support site for your application to see if it is compatible with NMEA.  They might have more steps for you on how to configure your app to utilize the GPS over WiFi feature of the MiFi.

  • Getting a Seagate hard drive recognised over WIFI

    I have recently bought a Seagate external drive. It works fine for Windows over WIFI. But for the Mac, it only works when directly connected and is not recognised over WIFI - the drive is not listed under devices.  It did when I first started the drive yesterday, when I managed to copy all my files onto the external drive via WIFI.  But not today.  Perhaps related to the software update I ran last night?  What's the problem?

    I'm a little confused by your description.  It sounds like you said that the drive works normally when connected to your Mac but is not seen by other pc's or Macs connected to your network.  Just plugging in an external drive to your Mac does not automatically make it a shared drive.  Go to System Preferences > Sharing and make sure file sharing is turned on and that your external drive is listed in the shared folder list (click on file sharing in the services list).  If not then:
    Connect external drive and power it on.
    Unlock the Sharing pane in System Preferences by clicking on the lock icon and enter password.
    Turn on File Sharing if it is not on.
    Add you external drive by clicking on the [+] button below the Shared Folders list.
    Set up user permissions for the drive as desired.
    Lock pane.

  • Why is there no Sync over wifi option on devices page in itunes?

    I have downloaded and installed both itunes 5 and ios 5.  However, I go to my iphone page, click summary, scroll all the way down the page, but can't find the option to sync over wifi.  What is happening here, and how can I get that option?

    pianotech wrote:
    If that's true, that's ridiculous since it works on Windows 7. Someone running OSX 10.5.x can't run it but Windows can??
    It even works on the 10yr old Windows XP.

  • How to connect MBA to Windows domain over Wi-Fi?

    Hi. I`m on a university campus. MBA automatically picks up wi-fi connection, which is great. Because MBA does not have an Ethernet port, how do I join my office's Windows 2003 network domain over Wi-Fi? Thanks for any help I can get!

    Hi dufus,
    Are you looking to access domain resources over WiFi? Such as printers, AD resources, etc.? This sounds like a question for the domain administrators, unfortunately. Reason I say that, the domains that I manage at work specifically restrict access to resources based on connection Subnet and VLAN. As such unless you're hard wired to specific ports you don't get access to my resources.
    Everyone manages their domains differently and without knowing how your domain is configured it's impossible to recommend steps.

Maybe you are looking for

  • Supplier Processing Lead Time with ASCP Unconstrained Plan

    Hi All, Is it possible for unconstrained plan to consider supplier lead time constrained which we define in ASL? I have defined an Unconstrained Plan & the plan is not considering Item Level , ASL Lead times & generating the planned Orders to meet de

  • Query issue with 9i database only

    Hi, I am getting this strage error in 9i database only for the following query. It works perfectly fine in any 8i databases. The query is executed from schema user X with all the referenced tables from schema user B. ERROR at line 1: ORA-03113: end-o

  • My exchange keeps quitting after I did a software update

    Since I updated to 10.9.5 My exchange email would not let me connect.  When i go to set it up, it goes through all the steps and then QUITS!!!! This is NON STOP. Even the Genius Bar could not help me! 

  • Problem with DateFormat.parse

    hi, I'm working using Java 1.5. i'm using SimpleDateFormat to parse date strings. My program has the following piece of code: Class DateConverter { SimpleDateFormat m_sdate = null ; public DateConverter() { this.m_sdate = new SimpleDateFormat("yyyyMM

  • I have a new macbook pro and I want to reinstall my adobe creative suite 5.5

    I have a new macbook pro and I want to reinstall my adobe creative suite 5.5. How to process?