Windows 7 - System Repair Loop - Then .exe failure - Appears has lost all associations with .exe and .dll

Im in the proverbial and appreciate any guidance and assistance.
Running Lenovo Laptop Y570 Win 7 MS Office 2010 and Eset Antivirus
So first things first,
I was starting my computer next morning and ended up with a start up loop which was resolved however afterwards fails now to load Office, Google, IE
I ran Ipconfig and it appears I cant get to the router either, my other computers do so no router issue
Windows appeared to work fine except when I tried any MS Office program gives me (Box title)
Outlook.exe bad image - Contents of box "(Filepath to) office 14\mso.dll" is either not designed to run on windows or it contains an error in fact most .dll's will not
work if asked to
I was installing Roguekiller when a box pops up saying (Box tittle) "Unsupported 16 bit application" incompatibility
with 64 bit versions of windows contact vendor to see if 64 bit version available. Hang on wait what?
Have also run into HH.exe Bad Image as well.
Really appreciate any help please
Have also run SFC /scannow 5 times rebooted after each
Ran Roguekiller successfully
Ran Malware Bytes
While I have Internet access I cant start a browser, I dont have any disks ie these are keys only for WIndows 7 and Outlook Prof 2010
(I am using a different computer) other tools I have USB drive and external Hardrive
In a shocking spot

Hi,
Based on the description, the issue is likely on the Windows level. To verify this, please try some more .exe files, check if the issue occurs to all .exe files.
Anyway, for the Office problem, please try to repair Office 2010 from Control Panel -> Programs and Features to check the result.
You may also need to fix the file associations, or restore Windows to an earlier point. For Windows issues, please post the question in this forum below:
https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

Have new PC with windows 8. I own photoshop elements 9 and I have lost all my pictures, albums and tagging, how do I retrieve them?

I own elements 9. All files were backed up to a external hard drive and then downloaded to a new PC, with windows 8. I have lost all my pictures, albums and tagging. How do I retrieve all of this back into Elements 9?

It appears that you have made a backup via Windows and not via the integrated backup/restore process in the organizer. Since the albums and tagging are stored in catalogs, they are lost unless you also made a backup of the catalogs themselves.
The correct way to move your catalog(s) and images to a new computer:
https://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
Is your old computer still useable ?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

I was on windows 7 but changed to vista when i sync my iphone i lost all my photos music and apps can i get them back any how???please help me

i was on windows 7 and i had to format my computer i put windows vista on and when i downloaded itunes and sync my iphone i lost all my photos music and apps that was on my phone,my itunes account says i have got to accounts on two computers?? is there anyway i can get anything back? please help me. i have tried restore to back up but it is the same????

If they really meant that much to you, they would have been copied off to a computer at the earliest possible opportunity.
I personally find it amazing that people get so upset when pictures "accidentally" get deleted and then scream about how important they are. You wouldn't leave important paper work lying around to be lost/damaged/stolen, so why take a chance with important pictures on a device that can so easily be lost/damaged/stolen, or deleted by a child.

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help

Since downloading iOS 7.3 I have lost all my calendar entries and it wont accept new entries. Is it me or the system?

Since downloading iOS7.3 to my iphone 4, I have lost all my calendar entries and it won't let me create new entries either. Is it me or is it the system and if the latter how do I recover the data and add to it?
I am not up dating the system on my ipad in case the same thing happens. They aren't syncing on this facility.

Easy solution, thank goodness. On your iPhone, go to settings, then to iCloud. If your Calendar selection is turned off, turn it on. Your info should restore. If your Calendar selection is turned on, then turn it off. Choose to save calendars when asked. After it shuts the Calendar off, turn it back on. Your info should be restored.
Thank you to Apple support for walking me through this. Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
- JT

I bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help

bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!

- You can redownload yur apps at no additional cost. See:
How to redownload purchased apps from the App Store
- You only get one download of music and it is up to you to make a backup. However, sometimes if you explain what happens the iTunes store may allow a redownload of music. You can contact them by starting here and selecting the appropriate topic:
Apple - Support - iTunes

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

post in the vmware forum or call vmware customer support.

I forgot my iPod's password and then restore it. but I lost all the pictures and apps in it. how can I get them back?

I forgot my iPod's password and then restore it. but I lost all the pictures and apps in it. how can I get them back?
I need help please.
thank you

The backup does not include synced media like apps and music. You can redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you used PhotoStream get them from your stream. See:
iOS: Importing personal photos and videos from iOS devices to your computer

Lost all my touch programs and my webcam when I loaded Windows 7 what can I do?

I have a Touch smart PC IQ504 with Windows 7, 64-bit
I cannot download any new drivers.
I lost all my touch screen and my webcam when I install windows 7.
What did I do wrong?

I don't see why you're saying you can't download any new drivers, all the new applications you need for Win7 on an IQ504 are available in the support section for your model, if you can't find something look at the IQ506

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

Stuck in Windows Startup Repair Loop - U410

Hey guys, back with another problem. I'm this close to just giving up on this laptop.
I had used the laptop last night like to normally do - emailed some people, checked the mail, wrote some homework up. Shut down normally when I was done. I opened it this morning only to find thecomputer going into Windows Startup Repair.
I shrugged and said okay. the repair happened quickly and it then took me to the normal loading screen.
At which it stayed on loop for about an hour (I was able to watch a movie in the meantime on my phone only to see that it still wasn't done). I then forced shut down through the power button. Waited roughy a minute and then started t up again. This time I picked the option of Start Windows Normally hoping to see if a shut down from there would fix the problem. Only it was stuck on the loading screen for about twenty minutes.
Force shut down again. I went back to starting windows repair like it prompted me to do. Another hour wait at the looping startup screen.
I wish I could post a picture of the thing for you to see.
This is roughly my sixth or seventh time trying to start the computer.
I've also tried that method with the NOVO button as some posts say to do, but nothing is happening.
Should I just take the laptop into my nearest bestbuy or future shop??

I can't seem to access safe mode at all - I did the option of pressing F8 repeatedly but it seemed to ignore it and go into the option of either starting the Repair or running windows normally.
Once it does the repair, it stays on this screen indefinitely. The same goes with trying to start windows normally - it stays on the Loading Windows screen.

HT1320 hello there, i have an ipod classic (silver)120GB i have managed to download all my albums onto it.but then i have done something ,that has wiped all songs of it and now i can't redownload them .also my ipod keeps showing the apple logo and seems t

hello there, i don't have windows operating system on my computer, i have a system called ubuntu,so there for i can't download itunes. i have a music app,called banshee on my computer,and have been using it successfully.i managed to put my music from my computer to my ipod but al of a sudden it's not working and iv'e lost all my music.also my ipod seems to keep resetting its self because the apple logo keeps showing i'm afraid i'm not very good with tecnology i remember going to my ipod on a disc management app and pressing benchmark not to sure what i did i think i nrrd to reinstall yhe softwear on my ipod but the apple home page keeps telling me to download the lates itunes,but as i have stated this is not possible.can anyone please help me?.ps out of intress i have another iopod the same model can i transfer the settings from one to the other.regards mr france

Sorry, I can only advice that you go to ubuntu ipod forum, for a better response.
Here I can suggest install iTunes and Restore the iPod.

Windows 7 PrProj Files Associated with CS6 and not CC

I have the CC installed on my workstation. Since, for some reason, CC doesn't include Encore, I was advised to install Premiere Pro CS6 to get Encore installed. So I did.
All is well, except now when I double-click on a *.prproj file, Windows wants to open CS6 and NOT Premiere Pro CC. Since my *.prproj files are created with CC, CS6, of course, won't open them.
I tried to change the file association for the *.prproj file type, but for some reason, Premiere Pro CC isn't an option, and when I manually browse and choose CC, Windows still reverts back to CS6 to open *.prproj files.
What's up with this? I can open my *.prproj files if I launch Premiere Pro CC and THEN open the file, but I think I should be able to just double-click on the file in Explorer.
Can I uninstall Premiere Pro CS6 and KEEP Encore? Is there another way to change file assications in Windows?

I have found a solution. I had precisely the same problem. But I want to keep both CS6 and CC, since only CS6 has a direct link to Encore. The problem occurs whenever I install an update to CS6. Right now my Premiere file extensions open with CC. But if I install an update to CS6, the file extensions will go back to opening with CS6.
And I also tried changing the file extensions the way you did and had the same result.
But I found the way to change the setting in the Windows Registry. Go to HKEY_CLASSES_ROOT/Adobe.Premiere.Pro.Project. Then go to shell/open/command and change the program from CS6 to CC.
Also, if you do a search in the section of HKEY_CLASSES_ROOT/Adobe.Premiere.(with various endings following the word "Premiere") and change all instances of CS6 to CC, then you will find that if you go to the file association page, all the files that used to be associated with Premiere Pro CS6 will now be associated with Premiere Pro CC.

Windows 7 - System Repair Loop - Then .exe failure - Appears has lost all associations with .exe and .dll

Similar Messages

Maybe you are looking for