Windows 7 - "System update 4.0" for Lenovo N500 ?

Hello.
There is available new "System update 4.0" for Windows 7 but it has no support for N500, although "List of Windows 7 upgrade capable systems" has it.
When will there be available Windows 7 drivers for Lenovo N500? When will "System update 4.0" have support for N500?
Thank you.
Note from Moderator: Please don't post the same message in multiple boards/threads as it splinters the discussion. Duplicate(s) removed.

indenti,
The N500 is part of the valueline of products, and I believe that our present direction is that TVSU 4.0 is supported only on the ThinkPad systems.
The recommended action would be to manually download and install updated Win 7 drivers from the N500 driver matrix page as they become available.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

Where can I buy a keyboard from for Lenovo N500, keyboard?

Where can I buy a keyboard from for Lenovo N500, 4 GB of memory, 2 GHz dual core, Windows 7 32 bit, conexant high definition smart audio 221, 250 GB hard disk, vista experience rating 3.5.
Any help appreciated.

ebay.. and many online stores are your friends in this case.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

System update 5.03 for T520i 4239CTO running windows 7 64-bit does not execute

Hi, I've just installed the latest Lenovo system update software but it does not run properly. I just get the initial popup screen showing the version but nothing else happens. Looking at the event viewer I see an error saying "Retrieved null machine type model". Any advice on how to resolve this ?
Tx,

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

Did the system updates prepping me for Lion cause these glitches?

Good Morning.
Last week System Updates sent me a bunch of updates to prep my MB for Lion. As I was planning to upgrade to Lion anyway I went ahead and did them. My MB was up to date on all systems and updates before I ran them. I have since decided to postpone the Lion update but now, I've got lots of wonky behavior. Nothing serious. No loss of files or anything. Just ill timed little glitches that are wreaking havoc on my productivity. Some of what is happening:
1) I can't bookmark anything. The pop down menu does as it should but only shows what I want to bookmark. The pop down for the destination folder isn't there. This is a biggee for me as I use this alot.
2) I get thrown off the net a LOT. I get the 'You are not connected to the internet' message at least 6 times a day. No rhyme or reason to it and my connection at the box is just fine. If I go through the motions of 'diagnostics' for a minute or two and clear the cache then it wil 'reconnect'.
3) Many sites that I had no problem accessing before while using Private Browsing will no longer work unless I have it turned off.
4) Sometimes when typing, the words post slower than typed and I have to wait for them to catch up so I have lots of errors to deal with.
These are just what I can remember right now. And what can I/should I do about it?

No, I do not have a DROID 1. Yes I have experienced slowness after an update without performing a system reset. Doing the exact same update after a system reset I did not experience the system sluggishness. Backing up your app settings and then reloading them after the update will do basically the same thing as nothing if those settings ARE THE REASON that is causing the system sluggishness. I suggested doing the system reset and then reinstalling the apps, not just reloading the app settings. Verizon is not responsible for your apps causing system sluggishness, they do not write or guarantee the performance of any apps you get off the app market. Whenever they even mention an app available on the marketplace, they will go so far to say "download these apps at your own risk." Another thing that may help without a system reset is to delete all of your apps and then reload them 1 or 2 at a time and waiting a few days to see how they interact with your system. If everything is still fine, go ahead with a few more. When you experience sluggishness, you have found your culprit.

Finder windows do not update their content for ARD

Server (to which I am connected): MacMini (Late 2012) 10.8.3,
Computers (with whom I am connected): MBP 2008 10.8.3, iMac 2011 10.8.3.
After connecting I open any Finder window and try to select files with the mouse (or Command-A). The window is not updated. If you move the window on the desktop, it is updated. All these actions are performed without the monitor connected to the server.
If you connect an external monitor, so no problem. When connected to the monitor to send the image looks much smoother.
This problem does not occur if the map files in the list view. The problem is present, if the map as icons.
Tried to restart the server - did not help.
Tried to install Combo update 10.8.3 - did not help.
The problem occurred suddenly, it seems after I added the video in iTunes. (That is up to the challenge I did not install any software or not an administrator password).
How to fix it?
Here's a short video: http://www.youtube.com/watch?v=WtG1t6q9eFI
Also there is a server MacMini 2010 (10.6.8) - there are no such problems.

Found an interesting solution, I have not tried it myself yet, I'm waiting resistors
https://discussions.apple.com/message/20678554#20678554
(If the monitor is not connected, the video driver is not loaded.)

"Recovery system update required." for Find My Mac -- after already updated!

I've run the latest round of updates on My 2011 MacBook Pro, and I have run into a snag with the new iCloud control panel.
I want to enable the "Find My Mac" feature, but unfortunately I am not able to, as the checkbox is grayed out. There is an error beside the control saying that I need to update the recovery system as per the title of this thread. I actually already *did* do this earlier today, however, and there are no other updates.
What is going on here? Is it possible that the update didn't actually install properly? I was away from the computer at the time it rebooted and would have installed that portion, so I can't tell, but if I look in the update history, I see "Lion Recovery Update 1.0" from today in the list.
Is anyone else having this problem? I wonder if it's just a buggy update Hopefully this will be fixed soon by Apple in a subsequent update, but I'm curious if there's something I can do in the meantime.

Run Disk Utility, and Verify Disk.
You will likely notice errors that require you to reboot to the Recovery Partition, and run Disk Utility from there, to "Repair Disk".
After running Repair Disk, reboot to the main partition, and run Repair Permissions from Disk Utility.
Then install the Recovery System Update again.
I bet your problem will be solved.

System Update and Fix for Issue of HDD with HDP Detection for Windows Vista/7

T500/Vista Business
Hi,
(Recommended) Fix mentioned in subject line doesn't install on my machine and I'm not sure what it is (hard drive detection .. something :-).
Would someone pls explain it to me.
Many thanks.
woofy1

Well, here on my X200 the same situation!!!
I tried it how it was explained in the details - but won't install.

Windows 8.1 update-WON'T for satellite laptop-help!

I have been trying to update my windows 8.1 to the latest 8.1 update for x64 based systems (KB2919355). I got the message that I needed to update to this along with a security update needed for windows explorer 11 (KB2936068). I have tried to download it the past 8 hours with my antivirus turned on and off and it says it was not downloaded, try again. I have been trying again for the last 8 hours and have run out of patience. I tried from my computer's windows update and have tried from Microsoft Windows stand alone download site and still can't get it to download. The green bar goes across for about 10 minutes and then says it was unsuccessful and try again. I have a Toshiba Satellite S55-A5295 model with plenty of Ram and hard drive memory. I have also tried both over my wi-fi and hardwired to my cable modem via ethernet cable-again to no avail. I called Toshiba and they want to charge me to help. I called Microsoft and they want to charge me to help. Their price is about 1/4 cost of my computer, and my computer is only 6 months old. Toshiba tells me the warranty only covers hardware--not software like Microsoft Windows updates.  PLEASE HELP!!
[email protected]

Satellite C855-S5347
KB2919355 is essential.
I suggest you restore the hard disk to its original out-of-the-box contents as follows.
   Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
And then upgrade to Windows 8.1 by carefully following these instructions.
   How to Update from Windows 8 to Windows 8.1
-Jerry

Windows 8 enterprise update not availaible for windows media player

Hi,i am using windows 8 enterprise 64 bit and didn't find any windows media player so I downloaded the media player from the official Microsoft website and when I try to install it it shows that "WINDOWS UPDATE STANDALONE INSTALLER this update
is not availaible for your computer"
IS THERE ANY SOLUTION TO INSTALL MEDIA PLAYER ON MY WIN8 64BIT ENTERPRISE ????????

Hi,
You can go to Control Panel> Programs and Feature > Turn windows feature on or off>scroll down to Meida features (expand you will see windows media player), tick then ok.
Regards
Yolanda
TechNet Community Support

System update won't update

I had to do a factory restore and since then no matter what package either I manually install or system install , for system update for Lenovo 3000 N200 0769-alu notebook,, system update still gives run time error code. I have installed and re installed every package offered from when my system was bought in December 2007, one by one from the bottom to the top and the top to the bottom and still runtime error on system update.. Rescue and recovery has also been installed and uninstalled from the bottom to the top, and still only get the old very first rescue and recovery before all the perks came to it in 2008 and 2009. I know system update did a major overall and is now linked through message plus which has also been installed and re installed and all the WER patches show up in cmd as installed ,, But this manual crap is for the birds ,, I just want the system update to update when needed.. Also the bios is showing as updated so that went in okay etc etc. Any moderator have a quick link to a package to solve this problem ,, I have perused the downloads, drivers and software package center for 2 weeks now, uninstalling and re installing various or all of Lenovos packages but still a big runtime error on system update.. The factory restore was all because MS ordered me to do it as it was the only way to get the SP2 Vista update in and after they had totally messed up the system with all there co-pilot wonderful Indian techs screwing around in there trying to get the sp2 update in.. Before that everything was fine.. Now they blame Lenovo,, which is crap, but anyway Mr. and Mrs. Lenovo,, anyone got a quick link for the correct system or the latest system update software package for Lenovo System update .. The 3.14 is the one with the runtime error code.. Any solutions ,, I do like my system current and up to date.. Thanks
jenak 100

The problem is yaourt https://bugs.archlinux.org/task/27334

Lenovo System Update and Lenovo Support RSS Feed (X60)

Okay. I got Lenovo System Update (version 5, for Windows 7) and it did not offer me any Critical updates. Only Recommended and Optional ones. If it ain't broke, don't fix it, so I don't want to install Recommended and Optional updates, only the Critical ones if there is any.
On the other hand I also have the Lenovo Support RSS Feed. But they bring me to dead links. For my X60 the two drivers in my RSS Feed are
ThinkVantage Access Connections patch for Access Connections Version 5.95 for Windows 7 (32-bit, 64-...
Patch module for Power Manager for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) - ThinkPad -
Both are totally dead links.
The tricky part is that there is absolutely no correlation between the two: totally different drivers in the System Update and the RSS Feed.

Hello both,
SU has been discontinued because old SU version wouldn´t work with SP2.
Refer to this thread in at the ThinkVantage board regarding this situation and possible solutions
and ask your questions there, please.
Thread locked.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Lenovo System Update Broken, IA.exe command path error

Hello, I've been fighitng with Lenovo system update through out the years for various issues, but I believe I've found a new error that all my searching doesn't seem to cover. When I do a fresh image of Windows 8.1 and install system update, it works for the first and sometimes second run and reboot. But after these first uses, it completely fails, along with System Health and some of the other Lenovo software. I've managed through some trial and error and looking through the logs to narrow this down to the IA.exe program and the command being sent to gather information. Here is the command found in the tvsu logs: /execute ia.exe /arguments -filename$C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin$ -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory $C:\Program Files (x86)\Lenovo\System Update\egather\$ /type COMMAND /timeout 300000 Immediately after this is called, the system calls TVSUCommandLAuncher, and then reports RC eGAther: -1 and that it failed to execute TVIA program and quits. My error in System Update is that it couldn't gather client information. So I took the command and tried to run it myself, having to remove the /execute switch as I wasn't calling this some somewhere else. ia.exe /arguments -filename$C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin$ -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory $C:\Program Files (x86)\Lenovo\System Update\egather\$ /type COMMAND /timeout 300000 This when run, will throw "Error: The given path's format is not supported" message. I tinkered with the command line for a while before I figured out what was going on. It seems the "$" being used for the Filename and Directory settings are no longer functioning, and causing the program to not parse properly. I replaced all the $ with " and suddenly I can run the command manually, and it generates the output file properly. Now though I'm still stuck, as there's no way for me to edit the command being called by system update, so it will always improperly format its call and then fail. Does anyone have any idea what in the world is going on here, I can't figure out what would be causing this and why it works the first one or two launches, then never works again. This also causes any lenovo software that uses IA to freeze up, like the system health software from lenovo.

No, I don't do a silent install due to the license/eula agreements not functioning properly unless you've got an on-site repository. So its just after imaging via SCCM I'd install system update, run it once to get things installed, and then when I would attempt to run it again, or lenovo system health, they'd be permanently broken.
On this topic though I believe I sort things out. I was having issues with the systems later that turned out to be two corrupt files dealing with Windows Store app, and using SFC and DISM to try and repair them fails. After a lot of searching around I found that someone with Windows 10 preview had the exact same two files corrupted, so my thinking is there's some windows update out there causing issues, and the IA.exe program is affected by these corrupted files.
I had to get my win8.1 Install.wim file from the server, and then direct my broken system to use that as the source to do a dism cleanup and restorehealth. Once it completed it repored it was able to fix the two files and I've not had any more problems and was able to capture the images (previously capture failed because sysprep reported the OS wasn't in a good state).
I've still not gone and tried to install the realtek audio driver that I know caused the break, but thats just due to time limits with the project, if I have some time I'll try and install and see if things still function afterwards.
So to break down the events:
Clean Win8.1 Retail image, used SCCM to deploy onto a machine, run windows updates on the machine and install Lenovo System Update. Things looked okay until I would try to run System update a second time after rebooting, then it was broken due to IA not being able to gather data. Later after SFC and DISM scans was able to see that two files were being reported corrupt and unfixable, one I know is related to Store app, other I think is a library file for the Apps.
Fixed the files by getting the Install.wim from my iso file, telling the system to use that for the source as the online sources weren't working. Dism was then able to fix the two files and I could successfully sysprep/capture the system with SCCM tools.

System Update 5.0.2 fails to install on Windows 8.1 Preview

I am trying to install System Update 5.0.2 on a W520 running a fresh install on Windows 8.1 Preview. Solution Center is already installed. No other software has been installed on this box, other than standard windows updates.
When I try to install SU5.0.2, I can get to the EULA screen, click on the "I accept ..." toggle, Next button enables, but does nothing when I click it.
Any suggestions on how to SU5.0.2 to complete?
Thanks.
Tom
Here are the last lines in the tvsuSetup.log file after I try to press next, but before I cancel the install.
Action ended 10:23:37: CostFinalize. Return value 1.
MSI (c) (9C:3C) [10:23:37:709]: Doing action: MigrateFeatureStates
Action 10:23:37: MigrateFeatureStates. Migrating feature states from related applications
Action start 10:23:37: MigrateFeatureStates.
Action ended 10:23:37: MigrateFeatureStates. Return value 0.
MSI (c) (9C:3C) [10:23:37:709]: Skipping action: PatchWelcome (condition is false)
MSI (c) (9C:3C) [10:23:37:709]: Doing action: InstallWelcome
Action 10:23:37: InstallWelcome.
Action start 10:23:37: InstallWelcome.
MSI (c) (9C:3C) [10:23:37:709]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'InstallWelcome'
Solved!
Go to Solution.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

WER patch for system update patch 1.2 in System Update

This patch, on my machine, removed the task scheduler entry to run System update patch utility on Windows Event id 1001. ie , it turns off SUP a newer version of LPU, Lenovo patch utility. SUP is installed with system update.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

Windows 7 - "System update 4.0" for Lenovo N500 ?

Similar Messages

Maybe you are looking for