Windows 7 taskbar hidden

All of a sudden, I can no longer get the Windows 7 taskbar to show when I place the cursor at the bottom...What could be the cause(s)?

Go into your Control Panel and open the '''Taskbar and Start Menu'''. Click on the first tab, '''Taskbar''' (if it's not already open) and check the box '''Lock the taskbar'''. You can further customize your settings.

Similar Messages

When I click file print on adobe reader, the print button is hidden by Windows 7 taskbar

Hi,
When I click File then Print, it brings up the print menu, but the print button is covered by the Windows 7 taskbar, and I can't click on the print button when I scroll down to it, nor can I re-size your Print Menu Window. I am able to print by pressing on the Enter button on my keyboard.

Try changing your screen resolution to something a bit larger. The system requirements call for at least a 1024x768 resolution to view everything properly.
Let us know how it goes!
-David

How can I get the list view of tabs on the windows 7 taskbar exclusively and not just when I have a lot of tabs (over 13?) open at once?

How can I have tabs stack in the windows 7 taskbar before I have 13 tabs open?

Upgrade your browser to Firefox 8 and check
* getfirefox.com

Full screen windows 7 taskbar bug

Since the recent install of Flash Player 11 (v11,1,102,55) there was irritating problem on the laptop of my wife. When YouTube flash video were put in full screen the Windows 7 taskbar would remain visible.
The laptop screen is 1920 x 1200 so standard the DPI setting of the display is put to 150. If I would put the DPI to the standard setting the taskbar will disappear with full screen video but then everything is too small in windows. At first I did not release it could a problem with the Flash Player but when I did come to that conclusion I had to apply the following to the plugin-container program which is situated in the webbrowser install folder. In this case Mozilla Firefox.
After selecting the properties of plugin-container I went to the compatibility tab and put a flag in the option "Disable display scaling on high DPI settings". This basically solved the annoying problem but frankly such a sloppy fault in a commonly used program like Flash Player should not be there. I advise Adobe to correct this in the next version. There are quite a lot people these days who have laptops with HD resolution so fix it!
In the mean time I hope this will be of help to people who have a similar problem.

Oh thank God. I've been struggling with this very issue for months with my task bar obscuring Flash video in full-screen, which really sucks since that's where the video controls are.
I knew it was the DPI setting and I'm absolutely flabbergasted that Adobe hasn't accounted for this on a piece of software that is pretty much essential to using the internet and when most people are using HD displays.
After reading this fix, I immediately browsed to C:\Program Files(x86)\Mozilla Firefox and right clicked Properties on the plugin-container application. Right there on the Compatibility tab is the option Disable scaling on high DPI settings. Checked the box and imediatly full-screened the first flash video I could find. Problem solved, didn't even have to reboot the browser.
BarrieBar, I salute you. Never would have found this without your post.
Thanks.

Maximizing Window while Control Hidden Doesn't Behave Properly

Hi, I've run into a situation where I'm trying to take advantage of the resizing capabilities of LV8.x and I'm running into a snag I was hoping to get some help on.
Basically, when I have a (grouped) control hidden and then maximize the window and then show the control, the control is not where it should be.
I've attached an example VI.
Any ideas?
Thanks, Bruce
Message Edited by bmoyer on 08-13-2009 09:44 AM
Attachments:
Resize Window while Control Hidden Test.vi ‏254 KB

Hello,
When you are resizing your front panel, it only resizes the visible windows. I have tested this out and submitted a corrective action request (CAR #182933). If you want your panel positioned properly, I would suggest forcing the placement of the cluster by adding an event structure for a panel resize event. This will allow you to determine the coordinates of where it should be.
-Zach
Certified LabVIEW Developer

Right-click with 2 fingers on Windows Vista taskbar and nothing appears

I just updated my Bootcamp to 2.1, I thought it would solve my problem
"Right-click with 2 fingers on Windows Vista taskbar and nothing appears" but I still have this problem, I cannot right-click on my windows vista at all.
though, right-click on the notification area works.
right-click = pressing the trackpad with 2 fingers.

Now I have figured out I have to use 3 fingers instead of 2 fingers.
but in the BootCamp Control Panel there is an option that says
* Use 2 fingers for right-click

Tab Preview in Windows 7 Taskbar

Hello everyone,
I'm wondering if it is possible to disable tab preview in Safari 5 on windows 7 taskbar. I find this highly annoying as i just want to see individual instances of Safari (Should i have them that is) and not X amount of tabs in a seemingly huge jungle of tabs!
I have looked and read posts asking the same thing and yet there seems to not be an answer. Perhaps it is not even possible but i'd like at least it to be confirmed. Surely that would be a simple user preference.
Hope someone can help.
Thanks
Tom

There is a preference in the Options window that controls this.
Open the Options window (click the Firefox button, then select Options). In the Options window go to the Tabs section and make sure the preference "Show tab previews in the Windows taskbar" is selected.

My taskbar is blank in Firefox. It simply says 'Done' in the bottom l/h side. When I go back to windows the taskbar reappears with icons at r/h side.

My taskbar is blank in Firefox. It simply says 'Done' in the bottom l/h side. When I go back to windows the taskbar reappears with all icons at r/h side.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Windows 7 Taskbar and PSE12 Organiser

My Windows 7 taskbar does not pop-up as usual at the bottom of the screen when I have PSE 12 Organiser open full screen. To access my desktop or other programs, I have to minimise PSE 12 organiser.
The taskbar works OK when I have PSE 12 Editor open full screen

In windows 7, if you right click any icon that is pinned to the taskbar, and then, with that program's menu displayed, left click an empty part of the taskbar and move the mouse in any direction. The taskbar (even if it is locked) will jump to the top of the screen.
http://imgur.com/eG8Xz.png
Hi
I tried but was unable to recreate the behavior you are describing.
If this is something that just started recently, you might want to try using s System Restore point to go back to a time before the behavior started.
If this does not fix the problem, try creating a new User Account, Create a user account, log on with the new account and try to recreate the behavior.
If the behavior cannot be recreated with the new user account, this may indicate that your current user account is corrupted.
If this is the case, replace the corrupted account with a new account using the instructions in the following article.
How To Fix a corrupted user profile
Let us know what you find.
Thank You for using Windows 7
Ronnie Vernon MVP

Can one pin all items from the bookmark toolbar to the Windows 7 Taskbar Quicklaunch icon?

Is it possible to have the favorites toolbar displayed as 'pinned favorites' on the Windows 7 Taskbar?
I know I can just drag an favorite from the Favorites Toolbar to the Firefox Quicklaunch icon,
but it looks really ugly;
It shows the default Firefox favicon with the web address partially displayed instead of the name
I have given it on the Bookmarks Toolbar.
Is there a way to preserve the favicon, and have the Favorites name displayed instead?
Thanks in advance!
Regards,
Nick.

Heloo,
thanks for the swift reply!
That does not resolve my issue.
My bookmarks toolbar is already nice and tidy. ([https://docs.google.com/file/d/0B3fLyJeN1WiBYUV2aWloVVlGWHc/edit Screenshot])
What I am talking about, is getting them the same on the '''Windows 7 Taskbar'''.
They now look like [https://docs.google.com/open?id=0B3fLyJeN1WiBRVlKT3hzQ2FLek0 this].
The example shown is the address of my GMail inbox.
I would like to have it just show "GMail inbox" for example, instead of the url it is referring to, with the GMail favicon.

Pin Programs on the Windows 7 Taskbar & Start Menu with Group Policy (Windows Server 2008 R2)

Dear ALL,
I want to Pin Programs on the Windows 7 Taskbar & Start Menu with Group Policy (Windows Server 2008 R2) as per below description. Can someone please help me how to proceed and achieve this.
Pin the following applications to the Taskbar:
Outlook
Pin the following applications to the Start Menu:
Outlook
Excel
Word
Internet Explorer
Software Center
Regards,
Amit Kumar Rao

https://www.google.de/search?q=windows+7+pin+to+taskbar+vbs
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Copy Shortcuts to the Windows 7 Taskbar using MDT

I would like to copy items to the Windows 7 taskbar for all users, and do this during deployment as part of a task sequence. Does anyone know if this can be done. I found a script called pinItem.vbs, but do not know if it could be done from a TS, nor
how it would be.

Hi Scott,
I would recommend this script:
http://gallery.technet.microsoft.com/ScriptCenter/b66434f1-4b3f-4a94-8dc3-e406eb30b750/
It's a poweshell module that allows you to pin, items to both the task bar and start menu during your reference image build task sequence.
It's very simple to use this with MDT 2012 U1. Simply place the module in the folder {deploymentshare}\Tools\Modules\PinnedApplications\PinnedApplications.psm1
Then for example create a powershell "script" that looks something like this:
Import-Module PinnedApplications.psm1
Set-PinnedApplication -Action PinToStartMenu -FilePath "C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Internet Explorer.lnk"
Set-PinnedApplication -Action PinToTaskbar -FilePath "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Microsoft Office\Microsoft Outlook 2010.lnk"
Since the module is placed in the Tools\Modules folder, MDT can find this module easily during deployment without needing to specify a path where the module can be found.
Now the most important part of everything.
Whether it's SCCM or MDT that you use to deploy your custom image, you need to edit the unattend.xml of the task sequence that is used to
>>>Deploy<<<
the image. The default user profile is copied upon first boot after the image is applied, and not during the sysprep execution of your task sequence before your image is captured.
The CopyProfile setting is not enabled by default with the unattend.xml files created by MDT or SCCM, you will need to use WSIM to add this entry, more info can be found here:
http://technet.microsoft.com/en-us/library/ff716261.aspx
Dispite the article saying you cannot pin applications to start menu and task bar (and this is normally true if you do these tasks manually, then these items will not persist in the new user profile), this scripted method actually does work.
Kind regards,
Stephan Schwarz
If one of these posts answered your question or issue, please click on "Mark as answer".
My Blog | Twitter:
@Schwarz_Stephan | MCTS, MCITP, MCSA, MCC-2011.
How to configure Windows RE/OEM Recovery Partition with MDT
How to configure Windows RE/OEM Recovery Partition with MDT 2012 Update 1

With hardware acceleration enabled, and with plenty of tabs open, using the Windows 7 taskbar preview option will almost always crashed the nVidia display driver.

Latest Firefox 4 beta 6.
nVidia GT240 1GB DDR3 with driver version 258.96.
Windows 7 Ultimate.
If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
This doesn't happen if hardware acceleration is disabled.

It is beta software and the older 4.0 b6 version may not work with all display drivers.
You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/

Windows 7 taskbar freezed by iTunes

Hi there, I’m using iTunes 9.0.3 on Windows 7 x64 system and I’ve encountered this problem (not sure if this is specific to x64):
When I’m running the iTunes, sometimes the Windows 7 taskbar stops working properly. It doesn’t show the thumbnails when you mouse over a running application button and second thing, when you move your mouse off the taskbar, the taskbar remains in a state such as if there was the mouse in the place where it left the taskbar. To explain it, for example when you move mouse out of a button of an application which is running, the colored tint remains on the button even when the mouse is already off the taskbar and caption (not thumbnail) appears after a while. I would say that the taskbar is a sort of freezed. The only thing I know is that it happens sometimes when the iTunes is running but I’m not sure if it’s Windows or iTunes problem.
Have anyone of you experienced this problem?? Thanks for reply.
null

i have been having the same issue but my taskbar in on the left. i can move the window and just have to drag it an inch right each time.

KDE shuts down when I click on a minimized window in taskbar!

Hello
I'm having this strange problem since I use KDE 4.5.2; if Kwin desktop effects would be enabled (OpenGL), KDE shuts down immediately when I click on a minimized window in taskbar no matter what I do.
First I had this problem in Kubuntu 10.10 and then in Arch (after upgrading KDE), the difference is, in Arch I get this error on screen that probably helps solve the problem or at least find out its origination!
Here is the screenshot:
Some information that may help:
Xorg version: 1.9
VGA: ATI Radeon HD 5870
VGA Driver: catalyst-test 10.10-999 from AUR
Thanks in advance for your help...
Last edited by Pyruzan (2010-10-19 07:36:52)

Thank you for your reply.
I just upgraded Arch (# powerpill -Syu) and along by that KDE also got updated to 4.5.2-2 from 4.5.2-1, but nothing changed, probably got worse; Plasma workspace crashes, screen flickers and background goes black frequently for about 2 minutes after I log in, even if Kwin effects are disabled or enabled via XRenderer.
I said I had the same problem in Kubuntu Maverick where I let Kubuntu download and install ATI proprietary drivers. Are they considered beta also?
Anyways, here is another screenshot after KDE gets killed!:
and Xorg.0.log:
[ 1985.663]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 1985.663] X Protocol Version 11, Revision 0
[ 1985.663] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 1985.663] Current Operating System: Linux pyarch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
[ 1985.663] Kernel command line: root=/dev/sdb2 ro nomodeset
[ 1985.663] Build Date: 24 August 2010 01:44:37PM
[ 1985.663]
[ 1985.663] Current version of pixman: 0.18.4
[ 1985.664] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1985.664] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1985.664] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 20 07:57:43 2010
[ 1985.664] (==) Using config file: "/etc/X11/xorg.conf"
[ 1985.664] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1985.665] (==) ServerLayout "aticonfig Layout"
[ 1985.665] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1985.665] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1985.665] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1985.665] (==) Automatically adding devices
[ 1985.665] (==) Automatically enabling devices
[ 1985.665] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1985.665] Entry deleted from font path.
[ 1985.665] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1985.665] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1985.665] (**) Extension "Composite" is enabled
[ 1985.665] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1985.665] (II) Loader magic: 0x7d4880
[ 1985.665] (II) Module ABI versions:
[ 1985.665] X.Org ANSI C Emulation: 0.4
[ 1985.665] X.Org Video Driver: 8.0
[ 1985.665] X.Org XInput driver : 11.0
[ 1985.665] X.Org Server Extension : 4.0
[ 1985.665] (--) PCI:*(0:1:0:0) 1002:6898:1043:032e rev 0, Mem @ 0xe0000000/268435456, 0xf7cc0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 1985.665] (--) PCI: (0:5:0:0) 14f1:8852:6920:8888 rev 2, Mem @ 0xf7e00000/2097152
[ 1985.665] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1985.665] (II) "extmod" will be loaded by default.
[ 1985.665] (II) "dbe" will be loaded by default.
[ 1985.665] (II) "glx" will be loaded by default.
[ 1985.665] (II) "record" will be loaded by default.
[ 1985.665] (II) "dri" will be loaded by default.
[ 1985.665] (II) "dri2" will be loaded by default.
[ 1985.665] (II) LoadModule: "extmod"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1985.666] (II) Module extmod: vendor="X.Org Foundation"
[ 1985.666] compiled for 1.9.0, module version = 1.0.0
[ 1985.666] Module class: X.Org Server Extension
[ 1985.666] ABI class: X.Org Server Extension, version 4.0
[ 1985.666] (II) Loading extension MIT-SCREEN-SAVER
[ 1985.666] (II) Loading extension XFree86-VidModeExtension
[ 1985.666] (II) Loading extension XFree86-DGA
[ 1985.666] (II) Loading extension DPMS
[ 1985.666] (II) Loading extension XVideo
[ 1985.666] (II) Loading extension XVideo-MotionCompensation
[ 1985.666] (II) Loading extension X-Resource
[ 1985.666] (II) LoadModule: "dbe"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1985.666] (II) Module dbe: vendor="X.Org Foundation"
[ 1985.666] compiled for 1.9.0, module version = 1.0.0
[ 1985.666] Module class: X.Org Server Extension
[ 1985.666] ABI class: X.Org Server Extension, version 4.0
[ 1985.666] (II) Loading extension DOUBLE-BUFFER
[ 1985.666] (II) LoadModule: "glx"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1985.666] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 1985.666] compiled for 7.6.0, module version = 1.0.0
[ 1985.666] (II) Loading extension GLX
[ 1985.666] (II) LoadModule: "record"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1985.666] (II) Module record: vendor="X.Org Foundation"
[ 1985.666] compiled for 1.9.0, module version = 1.13.0
[ 1985.666] Module class: X.Org Server Extension
[ 1985.666] ABI class: X.Org Server Extension, version 4.0
[ 1985.666] (II) Loading extension RECORD
[ 1985.666] (II) LoadModule: "dri"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1985.666] (II) Module dri: vendor="X.Org Foundation"
[ 1985.666] compiled for 1.9.0, module version = 1.0.0
[ 1985.666] ABI class: X.Org Server Extension, version 4.0
[ 1985.666] (II) Loading extension XFree86-DRI
[ 1985.666] (II) LoadModule: "dri2"
[ 1985.666] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1985.667] (II) Module dri2: vendor="X.Org Foundation"
[ 1985.667] compiled for 1.9.0, module version = 1.2.0
[ 1985.667] ABI class: X.Org Server Extension, version 4.0
[ 1985.667] (II) Loading extension DRI2
[ 1985.667] (II) LoadModule: "fglrx"
[ 1985.667] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 1985.674] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 1985.674] compiled for 1.4.99.906, module version = 8.78.6
[ 1985.674] Module class: X.Org Video Driver
[ 1985.674] (II) Loading sub module "fglrxdrm"
[ 1985.674] (II) LoadModule: "fglrxdrm"
[ 1985.674] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1985.674] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 1985.674] compiled for 1.8.99.905, module version = 8.78.6
[ 1985.674] (II) ATI Proprietary Linux Driver Version Identifier:8.78.6
[ 1985.674] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.783
[ 1985.674] (II) ATI Proprietary Linux Driver Build Date: Oct 5 2010 21:22:57
[ 1985.674] (--) using VT number 8
[ 1985.676] (WW) Falling back to old probe method for fglrx
[ 1985.677] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 1985.677] (--) Chipset Supported AMD Graphics Processor (0x6898) found
[ 1985.677] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 1985.677] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 1985.677] (II) AMD Video driver is signed
[ 1985.678] (II) fglrx(0): pEnt->device->identifier=0x16dcd80
[ 1985.678] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 1985.678] (II) Loading sub module "vgahw"
[ 1985.678] (II) LoadModule: "vgahw"
[ 1985.678] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1985.678] (II) Module vgahw: vendor="X.Org Foundation"
[ 1985.678] compiled for 1.9.0, module version = 0.1.0
[ 1985.678] ABI class: X.Org Video Driver, version 8.0
[ 1985.678] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 1985.678] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1985.678] (==) fglrx(0): Default visual is TrueColor
[ 1985.678] (**) fglrx(0): Option "DPMS" "true"
[ 1985.678] (==) fglrx(0): RGB weight 888
[ 1985.678] (II) fglrx(0): Using 8 bits per RGB
[ 1985.678] (==) fglrx(0): Buffer Tiling is ON
[ 1985.678] (II) Loading sub module "fglrxdrm"
[ 1985.678] (II) LoadModule: "fglrxdrm"
[ 1985.678] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1985.678] ukiDynamicMajor: found major device number 251
[ 1985.678] ukiDynamicMajor: found major device number 251
[ 1985.678] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1985.678] ukiOpenDevice: node name is /dev/ati/card0
[ 1985.678] ukiOpenDevice: open result is 10, (OK)
[ 1985.678] ukiOpenByBusid: ukiOpenMinor returns 10
[ 1985.678] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1985.679] (==) fglrx(0): NoAccel = NO
[ 1985.679] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 1985.679] (--) fglrx(0): Chipset: "ATI Radeon HD 5800 Series" (Chipset = 0x6898)
[ 1985.679] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x032e)
[ 1985.679] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 1985.679] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 1985.679] (--) fglrx(0): MMIO registers at 0xf7cc0000
[ 1985.679] (--) fglrx(0): I/O port at 0x0000d000
[ 1985.679] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1985.679] (II) fglrx(0): AC Adapter is used
[ 1985.680] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1985.744] (II) Loading sub module "vbe"
[ 1985.744] (II) LoadModule: "vbe"
[ 1985.744] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 1985.745] (II) Module vbe: vendor="X.Org Foundation"
[ 1985.745] compiled for 1.9.0, module version = 1.1.0
[ 1985.745] ABI class: X.Org Video Driver, version 8.0
[ 1985.745] (II) fglrx(0): VESA BIOS detected
[ 1985.745] (II) fglrx(0): VESA VBE Version 3.0
[ 1985.745] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 1985.745] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 1985.745] (II) fglrx(0): VESA VBE OEM Software Rev: 12.11
[ 1985.745] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 1985.745] (II) fglrx(0): VESA VBE OEM Product: CYPRESS
[ 1985.745] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 1985.779] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 1985.779] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 1985.779] (II) fglrx(0): PCIE card detected
[ 1985.779] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1985.779] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1985.780] (II) fglrx(0): Using adapter: 1:0.0.
[ 1985.912] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 1985.959] (II) fglrx(0): Interrupt handler installed at IRQ 56.
[ 1985.959] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1985.959] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1985.959] (==) fglrx(0): Center Mode is disabled
[ 1985.959] (II) Loading sub module "fb"
[ 1985.959] (II) LoadModule: "fb"
[ 1985.959] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1985.959] (II) Module fb: vendor="X.Org Foundation"
[ 1985.959] compiled for 1.9.0, module version = 1.0.0
[ 1985.959] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1985.959] (==) fglrx(0): Active stereo disabled
[ 1985.959] (II) Loading sub module "ddc"
[ 1985.959] (II) LoadModule: "ddc"
[ 1985.959] (II) Module "ddc" already built-in
[ 1986.091] (II) fglrx(0): Finished Initialize PPLIB!
[ 1986.091] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 1986.091] (II) fglrx(0): Output DFP2 has no monitor section
[ 1986.091] (II) fglrx(0): Output DFP3 has no monitor section
[ 1986.091] (II) fglrx(0): Output DFP4 has no monitor section
[ 1986.091] (II) fglrx(0): Output CRT1 has no monitor section
[ 1986.091] (II) fglrx(0): Output CRT2 has no monitor section
[ 1986.091] (II) Loading sub module "ddc"
[ 1986.091] (II) LoadModule: "ddc"
[ 1986.091] (II) Module "ddc" already built-in
[ 1986.091] (II) fglrx(0): Connected Display0: DFP4
[ 1986.091] (II) fglrx(0): Display0 EDID data ---------------------------
[ 1986.091] (II) fglrx(0): Manufacturer: ACI Model: 24f2 Serial#: 16843009
[ 1986.091] (II) fglrx(0): Year: 2009 Week: 32
[ 1986.091] (II) fglrx(0): EDID Version: 1.3
[ 1986.091] (II) fglrx(0): Digital Display Input
[ 1986.091] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1986.091] (II) fglrx(0): Gamma: 2.20
[ 1986.091] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 1986.091] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1986.091] (II) fglrx(0): Default color space is primary color space
[ 1986.091] (II) fglrx(0): First detailed timing is preferred mode
[ 1986.091] (II) fglrx(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.609
[ 1986.091] (II) fglrx(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 1986.091] (II) fglrx(0): Supported established timings:
[ 1986.091] (II) fglrx(0): 720x400@70Hz
[ 1986.091] (II) fglrx(0): 640x480@60Hz
[ 1986.091] (II) fglrx(0): 640x480@67Hz
[ 1986.091] (II) fglrx(0): 640x480@72Hz
[ 1986.091] (II) fglrx(0): 640x480@75Hz
[ 1986.091] (II) fglrx(0): 800x600@56Hz
[ 1986.091] (II) fglrx(0): 800x600@60Hz
[ 1986.091] (II) fglrx(0): 800x600@72Hz
[ 1986.091] (II) fglrx(0): 800x600@75Hz
[ 1986.091] (II) fglrx(0): 832x624@75Hz
[ 1986.091] (II) fglrx(0): 1024x768@60Hz
[ 1986.091] (II) fglrx(0): 1024x768@70Hz
[ 1986.091] (II) fglrx(0): 1024x768@75Hz
[ 1986.091] (II) fglrx(0): 1280x1024@75Hz
[ 1986.091] (II) fglrx(0): Manufacturer's mask: 0
[ 1986.091] (II) fglrx(0): Supported standard timings:
[ 1986.091] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1986.091] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1986.091] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 1986.091] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1986.091] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 1986.091] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1986.091] (II) fglrx(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1986.091] (II) fglrx(0): Supported detailed timing:
[ 1986.091] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 1986.091] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1986.091] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1986.091] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 1986.091] (II) fglrx(0): Monitor name: VW246
[ 1986.091] (II) fglrx(0): Serial No: 98LMQS008312
[ 1986.091] (II) fglrx(0): EDID (in hex):
[ 1986.091] (II) fglrx(0): 00ffffffffffff000469f22401010101
[ 1986.091] (II) fglrx(0): 2013010380351e78eec4f6a3574a9c23
[ 1986.091] (II) fglrx(0): 114f54bfef00714f818081409500a940
[ 1986.091] (II) fglrx(0): b300d1c00101023a801871382d40582c
[ 1986.091] (II) fglrx(0): 4500132b2100001e000000fd00384c1f
[ 1986.091] (II) fglrx(0): 5311000a202020202020000000fc0056
[ 1986.091] (II) fglrx(0): 573234360a20202020202020000000ff
[ 1986.091] (II) fglrx(0): 0039384c4d51533030383331320a0098
[ 1986.091] (II) fglrx(0): End of Display0 EDID data --------------------
[ 1986.102] (II) fglrx(0): Output DFP1 disconnected
[ 1986.102] (II) fglrx(0): Output DFP2 disconnected
[ 1986.102] (II) fglrx(0): Output DFP3 disconnected
[ 1986.102] (II) fglrx(0): Output DFP4 connected
[ 1986.102] (II) fglrx(0): Output CRT1 disconnected
[ 1986.102] (II) fglrx(0): Output CRT2 disconnected
[ 1986.102] (II) fglrx(0): Using exact sizes for initial modes
[ 1986.102] (II) fglrx(0): Output DFP4 using initial mode 1920x1080
[ 1986.102] (II) fglrx(0): DPI set to (96, 96)
[ 1986.102] (II) fglrx(0): Eyefinity capable adapter detected.
[ 1986.102] (II) fglrx(0): Adapter ATI Radeon HD 5800 Series has 3 configurable heads and 1 displays connected.
[ 1986.102] (==) fglrx(0): PseudoColor visuals disabled
[ 1986.102] (II) Loading sub module "ramdac"
[ 1986.102] (II) LoadModule: "ramdac"
[ 1986.102] (II) Module "ramdac" already built-in
[ 1986.102] (==) fglrx(0): NoDRI = NO
[ 1986.102] (==) fglrx(0): Capabilities: 0x00000000
[ 1986.102] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 1986.102] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 1986.102] (==) fglrx(0): UseFastTLS=0
[ 1986.102] (==) fglrx(0): BlockSignalsOnLock=1
[ 1986.102] (--) Depth 24 pixmap format is 32 bpp
[ 1986.102] (II) Loading extension ATIFGLRXDRI
[ 1986.102] (II) fglrx(0): doing swlDriScreenInit
[ 1986.102] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 1986.102] ukiDynamicMajor: found major device number 251
[ 1986.102] ukiDynamicMajor: found major device number 251
[ 1986.102] ukiDynamicMajor: found major device number 251
[ 1986.102] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1986.102] ukiOpenDevice: node name is /dev/ati/card0
[ 1986.102] ukiOpenDevice: open result is 15, (OK)
[ 1986.102] ukiOpenByBusid: ukiOpenMinor returns 15
[ 1986.102] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1986.102] (II) fglrx(0): [uki] DRM interface version 1.0
[ 1986.102] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 1986.102] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x183fd000
[ 1986.102] (II) fglrx(0): [uki] mapped SAREA 0x183fd000 to 0x7ff25769c000
[ 1986.102] (II) fglrx(0): [uki] framebuffer handle = 0x183fe000
[ 1986.102] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 1986.102] (II) fglrx(0): swlDriScreenInit done
[ 1986.102] (II) fglrx(0): Kernel Module Version Information:
[ 1986.102] (II) fglrx(0): Name: fglrx
[ 1986.102] (II) fglrx(0): Version: 8.78.6
[ 1986.102] (II) fglrx(0): Date: Oct 5 2010
[ 1986.102] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 1986.102] (II) fglrx(0): Kernel Module version matches driver.
[ 1986.102] (II) fglrx(0): Kernel Module Build Time Information:
[ 1986.102] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-ARCH
[ 1986.102] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 1986.102] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 1986.102] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 1986.102] (II) fglrx(0): [uki] register handle = 0x183ff000
[ 1986.114] (II) fglrx(0): DRI initialization successfull
[ 1986.114] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[ 1986.114] (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2304)
[ 1986.114] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption)
[ 1986.114] (II) fglrx(0): Largest offscreen area available: 1920 x 384
[ 1986.114] (==) fglrx(0): Backing store disabled
[ 1986.114] (II) Loading extension FGLRXEXTENSION
[ 1986.114] (**) fglrx(0): DPMS enabled
[ 1986.114] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 1986.114] (**) fglrx(0): Textured Video is enabled.
[ 1986.114] (II) LoadModule: "glesx"
[ 1986.114] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 1986.114] (II) Module glesx: vendor="X.Org Foundation"
[ 1986.114] compiled for 1.8.99.905, module version = 1.0.0
[ 1986.114] (II) Loading extension GLESX
[ 1986.114] (II) fglrx(0): GLESX enableFlags = 592
[ 1986.114] (II) fglrx(0): GLESX is enabled
[ 1986.114] (II) fglrx(0): Acceleration enabled
[ 1986.114] (II) LoadModule: "amdxmm"
[ 1986.114] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 1986.115] (II) Module amdxmm: vendor="X.Org Foundation"
[ 1986.115] compiled for 1.8.99.905, module version = 1.0.0
[ 1986.115] (II) Loading extension AMDXVOPL
[ 1986.115] (II) fglrx(0): UVD2 feature is available
[ 1986.116] (II) fglrx(0): Enable composite support successfully
[ 1986.116] (WW) fglrx(0): Option "VendorName" is not used
[ 1986.116] (WW) fglrx(0): Option "ModelName" is not used
[ 1986.116] (II) fglrx(0): X context handle = 0x1
[ 1986.116] (II) fglrx(0): [DRI] installation complete
[ 1986.116] (==) fglrx(0): Silken mouse enabled
[ 1986.116] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 1986.116] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 1986.236] (--) RandR disabled
[ 1986.236] (II) Initializing built-in extension Generic Event Extension
[ 1986.236] (II) Initializing built-in extension SHAPE
[ 1986.236] (II) Initializing built-in extension MIT-SHM
[ 1986.236] (II) Initializing built-in extension XInputExtension
[ 1986.236] (II) Initializing built-in extension XTEST
[ 1986.236] (II) Initializing built-in extension BIG-REQUESTS
[ 1986.236] (II) Initializing built-in extension SYNC
[ 1986.236] (II) Initializing built-in extension XKEYBOARD
[ 1986.236] (II) Initializing built-in extension XC-MISC
[ 1986.236] (II) Initializing built-in extension SECURITY
[ 1986.236] (II) Initializing built-in extension XINERAMA
[ 1986.236] (II) Initializing built-in extension XFIXES
[ 1986.236] (II) Initializing built-in extension RENDER
[ 1986.236] (II) Initializing built-in extension RANDR
[ 1986.236] (II) Initializing built-in extension COMPOSITE
[ 1986.236] (II) Initializing built-in extension DAMAGE
[ 1986.237] ukiDynamicMajor: found major device number 251
[ 1986.238] ukiDynamicMajor: found major device number 251
[ 1986.238] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1986.238] ukiOpenDevice: node name is /dev/ati/card0
[ 1986.238] ukiOpenDevice: open result is 16, (OK)
[ 1986.238] ukiOpenByBusid: ukiOpenMinor returns 16
[ 1986.238] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1986.272] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[ 1986.272] (II) GLX: Initialized DRI GL provider for screen 0
[ 1986.279] (II) fglrx(0): Enable the clock gating!
[ 1986.279] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 1986.337] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1986.337] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1986.337] (II) LoadModule: "evdev"
[ 1986.337] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1986.337] (II) Module evdev: vendor="X.Org Foundation"
[ 1986.337] compiled for 1.9.0, module version = 2.5.0
[ 1986.337] Module class: X.Org XInput Driver
[ 1986.337] ABI class: X.Org XInput driver, version 11.0
[ 1986.337] (**) Power Button: always reports core events
[ 1986.337] (**) Power Button: Device: "/dev/input/event2"
[ 1986.373] (--) Power Button: Found keys
[ 1986.373] (II) Power Button: Configuring as keyboard
[ 1986.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1986.373] (**) Option "xkb_rules" "evdev"
[ 1986.373] (**) Option "xkb_model" "evdev"
[ 1986.373] (**) Option "xkb_layout" "us"
[ 1986.392] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1986.392] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1986.392] (**) Power Button: always reports core events
[ 1986.392] (**) Power Button: Device: "/dev/input/event1"
[ 1986.426] (--) Power Button: Found keys
[ 1986.426] (II) Power Button: Configuring as keyboard
[ 1986.426] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1986.426] (**) Option "xkb_rules" "evdev"
[ 1986.426] (**) Option "xkb_model" "evdev"
[ 1986.426] (**) Option "xkb_layout" "us"
[ 1986.428] (II) config/udev: Adding input device USB Mouse (/dev/input/event4)
[ 1986.428] (**) USB Mouse: Applying InputClass "evdev pointer catchall"
[ 1986.428] (**) USB Mouse: always reports core events
[ 1986.428] (**) USB Mouse: Device: "/dev/input/event4"
[ 1986.453] (--) USB Mouse: Found 9 mouse buttons
[ 1986.453] (--) USB Mouse: Found scroll wheel(s)
[ 1986.453] (--) USB Mouse: Found relative axes
[ 1986.453] (--) USB Mouse: Found x and y relative axes
[ 1986.453] (II) USB Mouse: Configuring as mouse
[ 1986.453] (**) USB Mouse: YAxisMapping: buttons 4 and 5
[ 1986.453] (**) USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1986.453] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[ 1986.453] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 1986.453] (**) USB Mouse: (accel) acceleration profile 0
[ 1986.453] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 1986.453] (**) USB Mouse: (accel) acceleration threshold: 4
[ 1986.453] (II) USB Mouse: initialized for relative axes.
[ 1986.453] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 1986.453] (II) No input driver/identifier specified (ignoring)
[ 1986.455] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1986.455] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1986.455] (**) AT Translated Set 2 keyboard: always reports core events
[ 1986.455] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1986.476] (--) AT Translated Set 2 keyboard: Found keys
[ 1986.476] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1986.476] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1986.476] (**) Option "xkb_rules" "evdev"
[ 1986.476] (**) Option "xkb_model" "evdev"
[ 1986.476] (**) Option "xkb_layout" "us"
[ 1986.477] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1986.477] (II) No input driver/identifier specified (ignoring)
[ 1986.483] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 1987.450] (II) fglrx(0): EDID vendor "ACI", prod id 9458
[ 1987.450] (II) fglrx(0): Using EDID range info for horizontal sync
[ 1987.450] (II) fglrx(0): Using EDID range info for vertical refresh
[ 1987.450] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1987.450] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1987.450] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1987.450] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 1987.450] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1987.450] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 1987.450] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 1987.450] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 1987.450] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 1992.396] (II) fglrx(0): EDID vendor "ACI", prod id 9458
[ 1992.396] (II) fglrx(0): Using hsync ranges from config file
[ 1992.396] (II) fglrx(0): Using vrefresh ranges from config file
[ 1992.396] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1992.396] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1992.396] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1992.396] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 1992.396] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1992.396] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 1992.396] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 1992.396] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 1992.396] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 2067.708]
Backtrace:
[ 2067.708] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f558]
[ 2067.708] 1: /usr/bin/X (0x400000+0x67939) [0x467939]
[ 2067.708] 2: /lib/libpthread.so.0 (0x7ff256b6d000+0xf1c0) [0x7ff256b7c1c0]
[ 2067.708] 3: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x136a6bb) [0x7ff24ff4f6bb]
[ 2067.708] 4: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x144cdda) [0x7ff250031dda]
[ 2067.708] 5: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x14541bd) [0x7ff2500391bd]
[ 2067.708] 6: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x9b3523) [0x7ff24f598523]
[ 2067.708] 7: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x9b7b19) [0x7ff24f59cb19]
[ 2067.708] 8: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x9b9a42) [0x7ff24f59ea42]
[ 2067.708] 9: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0xb4c3ad) [0x7ff24f7313ad]
[ 2067.708] 10: /usr/lib/dri/fglrx_dri.so (0x7ff24ebe5000+0x971b33) [0x7ff24f556b33]
[ 2067.708] 11: /usr/lib/xorg/modules/extensions/libglx.so (0x7ff254a07000+0x1387c) [0x7ff254a1a87c]
[ 2067.708] 12: /usr/lib/xorg/modules/extensions/libglx.so (0x7ff254a07000+0x1be37) [0x7ff254a22e37]
[ 2067.708] 13: /usr/bin/X (0x400000+0x2a2e1) [0x42a2e1]
[ 2067.708] 14: /usr/bin/X (0x400000+0x2123e) [0x42123e]
[ 2067.708] 15: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7ff255affc4d]
[ 2067.708] 16: /usr/bin/X (0x400000+0x20de9) [0x420de9]
[ 2067.709] Segmentation fault at address 0x51
[ 2067.709]
Fatal server error:
[ 2067.709] Caught signal 11 (Segmentation fault). Server aborting
[ 2067.709]
[ 2067.709]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2067.709] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2067.709]
[ 2067.733] (II) Power Button: Close
[ 2067.733] (II) UnloadModule: "evdev"
[ 2067.759] (II) Power Button: Close
[ 2067.759] (II) UnloadModule: "evdev"
[ 2067.813] (II) USB Mouse: Close
[ 2067.813] (II) UnloadModule: "evdev"
[ 2067.839] (II) AT Translated Set 2 keyboard: Close
[ 2067.839] (II) UnloadModule: "evdev"
[ 2067.839] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2067.875] (II) fglrx(0): Backup framebuffer data.
[ 2068.013] (II) fglrx(0): Backup complete.
I think it's more related to Xorg 1.9 or KDE 4.5.2 than the driver (based on my experience with Kubuntu).
This problem forces me to use Gnome for the moment and I'm really upset!

Windows 7 taskbar hidden

Similar Messages

Maybe you are looking for